The patents are for a newly developed wafer demount gas distribution tool and for a wafer demount receptacle for separating the thinned wafer from the mounting carrier.
|
|
Do not attempt to repair, mount or demount a tire yourself.
|
|
Thereupon people started to demount the tents of the Governorate and take them.
|
|
It is not necessary to demount the pressure transmitter or interrupt the power supply.
|
|
Some people suggest that you demount your fuel tank and clean it at a radiator shop.
|
|
If the degree of the pollution is very high, the dosing worm has to demount and to clean.
|
|
The barrel was towed on its own four-wheeled wagon with an integral hoist to mount/demount the barrel.
|
|
To demount, press the Velcro bearer lightly forwards against the screen until it clicks out of the panel carrier.
|
|
Mike Kelly, the local historian, walked to the grave with Marion Demount, whose husband, Eric, was Kitty's great-great-grandson.
|
|
Mount/Demount mechanism The mount/demount mechanism consists of the duckhead, swing arm, and vertical slide. The duckhead is at the bottom end of the vertical slide. The duckhead is uniquely shaped, like a tapered bill, to fit next and surround the rim of a wheel. It can either be made of metal or plastic.
|
|
Right from the outset, a good and easy-to-use demount system was essential and that's what we've come up with.
|
|
After a lot of effort we manage to remove the whole contraption and demount it before storing it in the fore-cabin.
|
|
It seems the demountable rims refused to demount, or whatever it is they are expected to do when you take a tire off.
|
|
With this app you always have the instructions to mount and demount your pewag snox snow chains at hand when you really need it.
|
|
If the setting sleeve cannot be turned any further, demount brake cable h, loosen clamp bolt j using the screwdriver and retighten the cable.
|
|
The baying kit, supplied as part of the assembly, enables additional bays to be added to populated racks without having to demount any equipment already installed.
|
|
The Husqvarna DS 40 Gyro is the lightest drill stand in the Gyro family, but just as flexible, sturdy and easy to mount and demount as the DS 50 Gyro.
|
|
The EasyClimber ladder extension bracket ensures that workers climbing ladders to access roofs and other platforms for maintenance and inspection tasks can mount and demount the ladder in complete safety.
|
|
The duckhead mounts and demounts the tire from the wheel. The swing arm moves left and right. The purpose of the swing arm is to move the duck head near or away from the rim. The last component of the mount/demount mechanism is the vertical slide.
|
|
The preferred way to travel any distance. Usually the vehicles are purpose-built low-loading 'Transporters' although trailers are still used, especially for the movement of coaches and buses. Some transporter designs are very sophisticated, with bodies that 'demount' to give a low loading angle. This is especially useful for sports cars, etc.
|
|
There is a small chapel from the 19th century located in the centre of the district. Its construction is partially wooden and partially built of stone. In February 1863 a small detachment of insurgents had a camp near that chapel. Their task was to demount the railway track in order to break communication.
|
|
In his article, published in the governmental Transnistrian information agency "Olvia Press", political analyst V. Nikitin, characterized Konoplev's views as "right" and "pro-European". The article claims: "In Konoplev's opinion, to become a successful country Transnistria has to overcome Soviet era heritage, to demount monuments to Lenin, to clamp down communist parties and governmental media, to introduce private land ownership, to bring liberal economy with the help of European Union and to introduce European-based legal system. Konoplev, like Moldavian politician Oazu Nantoi, has his own three "D" – "deradicalization, demilitarization and desovietization of information stream". It means that the author of the report wants to say that any mentioning of Transnistria as "USSR fraction" and "Russian empire fortress" should disappear from information streams and at the same time the information has to become more tolerant to EU politicies… The proposal to demount monuments to Lenin and to clamp down communist organizations do not much comport with European practice, but smells like Mihai Ghimpu and extremism…".
|
|
Table top with the rim clamps on each end The table top and rim clamps hold and rotate the wheel to mount or dismount a tire. The table top is directly above the foot pedals and below the mount/demount mechanism. The table top is able to rotate clockwise and counter clockwise. The table top is shaped as the letter "X", but it can be a circle in different tire changer models.
|
|
On 10 October 1939, special German units, under the supervision of history and art experts (Dr. Dagobert Frey, an art historian at the University of Wrocław; Gustaw Barth, the director of museums in Wrocław, and Dr. Joseph Mühlmann, an art historian from Vienna) started to demount floor, marbles, sculptures and stone elements such as fireplaces or moulds. The priceless artefacts were taken to Germany or stored in Kraków's warehouses. Many of them were also seized by various Nazi dignitaries who resided in Warsaw.
|
|
FlexEnable's maximum processing temperature for organic thin-film transistors is below 100 °C. This low temperature allows for the use of lower-cost plastic substrates enabling low cost, high yield mount and demount approach to handling flexible substrates . FlexEnable also state that their transistors are the most flexible – and can be bent to a radius of 0.25mm thousands of times without affecting performance. FlexEnable's OTFT technology and materials can be used for the manufacture of flexible LCD and flexible sensor arrays using existing flat panel display manufacturing lines.
|
|
A secondary reason to run IEFBR14 was to unmount devices (usually tapes or disks) that had been left mounted from a previous job, perhaps because of an error in that job's JCL or because the job ended in error. In either event, the system operators would often need to demount the devices, and a started task - `DEALLOC` - was often provided for this purpose. Simply entering the command S DEALLOC at the system console would run the started task, which consisted of just one step. However, due to the design of Job Management, DEALLOC must actually exist in the system's procedure library, SYS1.
|
|
For transport, the Mrs 99 could be broken down into two separate wagon loads for the barrel and gun cradle. At the front of the gun cradle, a two-wheeled wooden spoked axle was attached and the rear of the cradle was then hooked up to a limber so the mortar could be towed by a horse team or artillery tractor. The barrel was towed on its own four-wheeled wagon with an integral hoist to mount/demount the barrel. Once on site, the axle was removed and a set of small wheels could be fitted to the front of the gun cradle.
|
|
It is probably the first time that the people of the world have worked together to erect a bearing structure and to experience the joy of constructing. Erik Reitzel's experience with minimal structures was utilized, in particular his experience from building the external lift tower of la Grande Arche in Paris. A completely new building system had to be developed based on the use of special joints, rods, and bracing wires which are easy to mount, demount and transport. The development of the building system was a result of interaction between his research, education, and practice.
|
|
Heavy-duty tire changers require larger equipment because these changers deal with larger, heavier tires and wheels. Heavy-duty tire changers can work with some wheels up to in diameter and tires up to in diameter and wide. Heavy-duty tire changers are used for agricultural, off-road and construction vehicles. However, now, bigger versions of the heavy-duty tire changers are designed to mount/demount tires up to in diameter and also feature a hydraulically operated self-centering four-jaw chuck with clamping jaws that can clamp from either from the wheel’s inside or from the center bore.
|
|
Rivergums is one of 4 major schools in the Rivergums area (the first to have been built) and was Built to accommodate approximately 430 students, from kindergarten to Year 6, although the school has been Rapidly growing in terms of construction to accommodate more through demount-able classes. Rivergums Primary School was built by the Cockram Construction and was designed by the Bateman Architects. The school was constructed and is currently made out of concrete floors, brick walls/wallpaper with contrasting bonded panels, draped plasterboard ceilings and metal roofs.The $18 million project was built to consist of an administration block, 4 teaching blocks – 1 with an inclusive education classroom and arts and crafts room, library resource centre and staff room, covered assembly area with canteen and music room connected into the block itself, basketball/tennis/volleyball courts, car parking, play grounds and landscaping.
|
|