80 Sentences With "reamed" | Random Sentence Generator

I was like, 'Oh God, he's going to get reamed.

Peterson's been reamed by everyone, including President Trump, for failing to engage Cruz.

Trump reamed Martinez during his rally Tuesday night in Albuquerque, which she skipped.

Their clashes culminated in a heated meeting in which Tillerson rudely reamed out DeStefano.

" Meanwhile, those in favor of the bill have publicly reamed companies for "tech industry obstruction.

Clearly buzzed, he complains to Katie about getting "reamed" by Ariana, and the whole story comes out.

He scowled at teammates on the court and reamed them in the media when games were over.

Most designers would get reamed for that fact, but Kawakubo has mostly escaped widespread criticism for it.

People reamed Dawson for his facetious treatment of mental health, and Dawson later apologized to anyone who was offended.

When she announced she was rejecting corporate PAC money, Slotkin reamed her opponent, Bishop, for taking money from the drug company McKesson.

"Flight attendant on American reamed me out 4 playing WORDS W FRIENDS while we sat at the gate, not moving," he wrote.

Last week, we watched Scott Disick get reamed out for hiding a woman in his hotel room during a trip to Dubai.

Critics reamed the film for being flat out awful, dragging on and overcomplicating a simple story, and having an overabundance of CGI.

Vox's Alex Abad-Santos was reamed for not identifying a romantic relationship between Steve Rogers and Bucky Barnes in Captain America: Civil War.

The competitors: Top Senate Intelligence Committee Democrat Mark Warner reamed Twitter out for what he called an "inadequate" effort to address the panel's questions.

Finally, toward the end of construction, Mr. Trump reamed an executive with vulgarities, leapt up and punched a hole in one of the low ceilings.

Companies are going under left and right, Wall St. is going ballistic, and all of our bosses are getting reamed out by CEOs as we speak.

The 2000th Circuit panel – Judges Jerry Smith, Rhesa Barksdale and Stephen Higginson – reamed Lanier repeatedly and by name, accusing him of inflammatory tactics and outright deception.

Instead, Bloomberg spent his first 2020 debate getting reamed by opponents making the case that the billionaire presidential candidate had no home inside the modern Democratic party.

I, too, was pretty appalled by her stilettos — they oozed of elitism, the same elitism both Barack Obama and Hillary Clinton would get reamed for in the press.

The de facto "villain" of Love Is Blind struggled to overcome her past connection with Barnett while engaged to Mark — and viewers (including Amber) reamed her for it.

That dubious honor may belong to more money-focused rave promoters, who like good opportunists, saw the growing dance music phenomenon as something to be reamed for all its worth.

Speaking moments after Clinton wrapped up a speech in which she lambasted Trump's positions on women's issues, Trump reamed Clinton on her policy positions and raised controversies swirling around the Democrat.

But in the most recent rulings, the administration was once again reamed by a federal judge for promulgating a rule in direct defiance of the law — the ACA itself in this case.

Intriguingly, Anonymous admits Mattis had some differences with McCain, while Snodgrass explains what those differences were: McCain, as chair of the Senate Armed Services Committee, reamed out Mattis for supposedly failing to brief him adequately.

" According to The Daily Beast, the outing of this detail absolutely enraged Pompeo, who reamed out Heather Nauert, the State Department's press secretary, who had approved Wadhams including the tidbit in his story, demanding someone's "head on a plate.

While Mark Zuckerberg is getting summoned to Congress and getting reamed out on national television for having no good good answer for why anyone should trust Facebook with their data, Apple CEO Tim Cook is busy showing the world his pencil.

He does that by barging into her office (who would walk into their superior's office without knocking if the door was closed???), then jumps on a call to come to her defense as she's getting reamed by a board member (again, who does that???).

While a group of rabbis and other pro-Israel leaders are planning to protest Trump's speech later Monday at AIPAC, Clinton's speech Monday was well-received as the audience of Israel supporters loudly cheered throughout her address -- and not just when she reamed Trump.

Fellow reporters reamed NBC host Matt Lauer on Twitter Wednesday night for being too soft on Donald TrumpDonald John TrumpPossible GOP challenger says Trump doesn't doesn't deserve reelection, but would vote for him over Democrat O'Rourke: Trump driving global, U.S. economy into recession Manchin: Trump has 'golden opportunity' on gun reforms MORE during a presidential forum.

An under reamed pile is used in the base to remove this defect. 2\. Under reamed piles are used in low bearing capacity Outdated soil (filled soil) 3.Under reamed piles are used in sandy soil when water table is high. 4\. Under reamed piles are used, Where lifting forces appear at the base of foundation.

To achieve highly accurate and consistent diameters with a reamer, one must consider process variables that can influence the overall quality of the hole being reamed. Variables such as reamer material, reamer design, material being reamed, temperature at the reamed surface, reamer speed, machine or operator movement, etc. must be addressed. By controlling these variables to the best extent possible, the reaming process can easily produce highly accurate and consistently sized holes.

The blanks are first reamed. The reamer consists of a twisted tapered and eight fluted tool.

There are only minute variations between these cartridges. Most .458 Lott chambers will accept the .450 Watts cartridge as the chambers are reamed to accept a cartridge.

They are used in normal ground condition also where economics are favorable. Handbook on Under-reamed and bored compaction pile foundation, Central building research institute Roorkee, Prepared by Devendra Sharma, M. P. Jain, Chandra Prakash Under read piles foundation is used for the following soils:- 1\. Under reamed piles are used in black cotton soil: This type of soil expands when it comes in contact with water and contraction occurs when water is removed. So that cracks appear in the construction done on such clay.

45-90 Express is capable of over 4,200 ft-lbs (5694 J) muzzle energy. Many modern single shot or break barrel .45-70 rifles can be easily reamed by a competent do-it-yourselfer to shoot .45-90 Express.

This burr should be cleaned or reamed when cutting electrical conduit to prevent stripping of the insulating coating from the wires. In fluid handling applications, the burr should also be removed, as it can restrict the flow and cause turbulence.

Most .375 H&H; rifles can be converted to the .375 Weatherby Magnum by having the new chamber reamed with no further modifications made to the rifle. The cartridge also makes an excellent choice for those who want a step up in performance over the .

The officer who made it, left the service to do very well elsewhere. Conversion of the Class 14B to superheating began soon afterwards. Between 1922 and 1925, all fifteen Class 14B locomotives were converted. Their cylinders were reamed from bore and the boiler pressure reduced from .

Such precision joints are used in aircraft assembly and are frequently used to join the two or more wing sections used in a sailplane. These may be re-reamed one or more times during the aircraft's useful life, with an appropriately oversized pin replacing the previous pin.

The mold is then broken off the casting. The gunhead is cut off, and the bore of the cannon reamed out using a boring mill. The process for the cylinder for a steam engine would be similar. The process for casting a bell is of the same nature, but the procedure is necessarily different.

Thus the grooves will no longer be 100 per inch, and the cylinder will skip if played on a typical feed-screw- type machine. The diameter will also have shrunk and many such cylinders will no longer fit on the mandrel unless very carefully reamed to fit. Such cylinders can still be played quite satisfactorily on suitable modern equipment.

When properly designed and used, reamers can experience an extended service life of up to 30,000 holes. A properly controlled process is also capable of maintaining a consistent size down the entire length of the hole while minimizing the hour- glass effect. Reamed holes may typically have a surface finish of 10 to 25 µin. Ra.

Some S&W; model 29s were rebuilt by the AAI Corporation to make the Quiet Special Purpose Revolvers (QSPR). These had new, short, smoothbore barrels , with bore, with cylinder chambers reamed to accept special QSPR ammunition which externally resembled metal-cased .410-bore shotgun shells but internally worked as a piston to trap the gases. This special ammunition was made by AAI.

Workshop Technology by W.A.J. Chapman Ph.D. M.Sc.(Eng.), M.I.Mech.E., M.I.Prod.E. Principal Hatfield College of Technology, Hertfordshire first published 1951 part one, two and three published by Edward Arnold (publishers Limited It is done for making internal holes of very accurate diameters. For example, a 6mm hole is made by drilling with 5.98 mm drill bit and then reamed to accurate dimensions.

Under-reamed piles have mechanically formed enlarged bases that are as much as 6 m in diameter. The form is that of an inverted cone and can only be formed in stable soils. The larger base diameter allows greater bearing capacity than a straight-shaft pile. These piles are suited for expansive soils which are often subjected to seasonal moisture variations, or for loose or soft strata.

Since the reaming process leaves the valve guide with a much better surface finish and shape than typical replacement guides, and since the oversize valves often have chrome plated stems, remanufacturers also discovered that valve train warranty issues are virtually eliminated. Studies have been conducted which show that through the proper selection of the reamer and reaming process, valves guides can be quickly and efficiently reamed to a consistently repeatable size.

357–359 On 23 March 1919, the Italians sailed the ship to Venice together with several other former Austro-Hungarian warships and displayed them in a victory parade the following day. When the Allies divided up the Austro- Hungarian Fleet amongst themselves in January 1920, Tátra was awarded to Italy. She was reamed Fasana on 27 September and towed to Pola on 16 October to provide spare parts for her sisters.

Early fracture immobilisation and fixation helps to prevent further soft tissue injury and promotes wound and bone healing. This is especially important in the treatment of intraarticular fractures where early fixation allows early joint motion to prevent joint stiffness. Fracture management depends on the person's overall well being, fracture pattern and location, and the extent of soft tissue injury. Both reamed and unreamed intramedullary nailing are accepted surgical treatments for open tibial fracture.

Depending on where the transplant site is and the size of the graft, an additional blood supply may be required. For these types of grafts, extraction of the part of the periosteum and accompanying blood vessels along with donor bone is required. This kind of graft is known as a vital bone graft. An autograft may also be performed without a solid bony structure, for example using bone reamed from the anterior superior iliac spine.

The Navy sold Coromandel in 1866 to R. Byrne & Company, Hong Kong. In 1867 she was sold to Kishu, Japan, where her new owners reamed her Naruto. Glover & Co., of Hong Kong, purchased her in 1868, who converted her to screw propulsion. The company went bankrupt and she was sold to Wright & Co., of Nagasaki, who sold her to Iwatani Shozo, who sold her to Hunt & Co., managers in Japan for the Netherlands Trading Society.

This permits a lower operating temperature for the tubes, also a more even heating. This is claimed by the makers to encourage more uniform boiling within the tube, thus faster steam-raising. An unusual feature of this boiler is that the field tubes are not rigidly attached to the boiler shell, but merely gasketed into place. The thickened ends of the tubes are formed to a taper and the tubeplate holes are reamed to match.

Once this is done, the femoral tunnels for the sMCL and POL can be reamed to a depth of 25 mm using a 7-mm reamer. The next aspect of the surgery is preparation and placement of the reconstruction grafts. The preparation can be done while the other steps are being completed by another surgeon or physician's assistant. The semitendinosus tendon can be harvested using a hamstring stripper for use as the reconstruction autograft.

Back at the office, Jake is getting reamed out by Captain O'Day, who tells Jake the dealer may have a chance to call police brutality due to his actions. However, O'Day makes Jake a deal that could get him out of his potential bind. Interpol has contacted NYPD about an operation involving snuff films and wants Jake to take on the operation. When Jake learns the operation is in Thailand, Jake refuses to take the assignment.

Hole types in engineering: blind (left), through (middle), interrupted (right). In engineering, machining, and tooling, a hole may be a blind hole or a through hole (also called a thru-hole or clearance hole). A blind hole is a hole that is reamed, drilled, or milled to a specified depth without breaking through to the other side of the workpiece. A through hole is a hole that is made to go completely through the material of an object.

The dulcian is generally made from a single piece of maple, with the bores being drilled and reamed first, and then the outside planed to shape. The reed is attached to the end of a metal bocal, inserted into the top of the small bore. Unlike the bassoon it normally has a flared bell, sometimes made from a separate piece of timber. This bell can sometimes be muted, the mute being either detachable, or built into the instrument.

6a-7a, 19-20, 45-46. In addition, all those locomotives which had been built with bore cylinders had their cylinders reamed to a bore of . When larger tyres were fitted to their coupled wheels, the old tyres were left in position and turned down on the wheel centres to serve as liners and the new tyres were then shrunk on over the liners. The leading coupled wheels, which had been flangeless as built, were flanged during the retyring.

A chain suspension bridge - Clifton Suspension BridgeThe bars may be fabricated with pin holes that are slightly undersized. If so, these are then reamed in the field. This field reaming ensures that stresses will be uniformly distributed among the several bars forming the truss element or the chain link. Corrosion resistant treatment in the form of grease, white or red lead oil paste, or other water-excluding material may be added at the time of the assembly.

Considerable improvements were effected on the Class 16D after they entered service. The first modification was to their cylinders, which were reamed from a bore of . During 1941, all seven engines had their coupled wheels retyred from diameter. To compensate for the loss of tractive effort due to the larger diameter wheels, their operating boiler pressure was increased from by an adjustment of the setting of their safety valves.South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941).

Analysis showed that these could fail by shearing under extreme stress. Therefore, at most locations each given rivet was removed by breaking off the head with a jack- hammer [rivet buster] and punching out the old rivet, the hole precision reamed and the old rivets replaced with heat-treated high-strength tension- control [TC] bolts and nuts. Most bolts had domed heads placed facing traffic so they looked similar to the rivets that were removed.[Caltrans contract 04-0435U4, 1999–2004].

The trigger mechanism was honed for a better trigger pull. The metal parts were refinished, and the forend of the military stock was shortened and reamed out to accept the larger-diameter target barrel. The stock was then finely polished and target sling swivels installed.Book of Rifles by W. H. Smith and Joseph E. Smith, 1975, The steel Mauser buttplate remained. Both the foresight and aperture rearsight, and the sight picture they provided, were designed to be similar to the M1 Garand.

Steel dowel pins Dowel pins are often used as precise locating devices in machinery. Steel dowel pins are machined to tight tolerances, as are the corresponding holes, which are typically reamed. A dowel pin may have a smaller diameter than its hole so that it freely slips in, or a larger diameter so that it must be pressed into its hole (an interference fit). When designing mechanical components, mechanical engineers typically use dowel holes as reference points to control positioning variations and attain repeatable assembly quality.

The .45-90 Sharps (also called .45-90 WCF or simply .45-90) has occasionally been used in converted Marlin 1895 rifles. The .45-90 conversion involves modifications to the action that increase the bolt travel and action timing (to adjust when a round is ejected, and when a new round lifts to enter the chamber), and the chamber in the barrel is reamed to .45-90 specifications. The case of a .45-90 is more than a quarter inch longer than the .45-70.

The blanks are forced on the reamer by hand to a stop. The position of the stop is adjusted so that sufficient material will be removed from both ends of the blanks when the blank is edged in the next operation. The reamer revolves at approximately 300 RPM. 7\. The edging operation consists in placing a reamed blank on a tapered mandrel and by means of two special cutters working in unison the ends of the blank are formed to conform in couture to a standard template.

It is not exaggerate to state that this tank helps to strengthen up the ground water of those agriculturists. Being not reamed for long time, Amma Kulam has been taken up by NABARD Scheme under improvement of Drinking water sources with an estimate of Rs. 20.00 Lakhs and renovating works started. By the work of cleaning the silt and renovation of the tank, now the tank overflows resulting benefiting the leads around the tank, to raise water level in the deep bore wells and nearly 500 wells in nearby houses.

The battery specification was changed to a larger, standard battery cell size, resulting in complaints of batteries getting stuck in the wood shoulder rest (the compartment was later reamed out to accommodate the larger cells). The M1 and M1A1 used a rear iron sight and a front rectangular "ladder" sight positioned at the muzzle. The vertical sides of the ladder sight were inscribed with graduations of 100, 200, 300, and 400 yards, with the user elevating the bazooka so the rear sight lined up with the selected "rung" on the front sight.

They were delivered with diameter coupled wheels and their boiler safety valves were set at an operating pressure of . All twelve engines eventually had their coupled wheels retyred to diameter and, to compensate for the loss of tractive effort due to the larger diameter wheels, their operating boiler pressure was increased to by an adjustment of the setting of their safety valves. This modification enabled these mixed traffic locomotives to handle the fastest mainline passenger trains. Probably at the same time, their cylinders were reamed from a bore of .

Sentinel Gap Sentinel Gap is a water gap formed by the Columbia River in the Saddle Mountains, near Mattawa in Washington state. The gap is "a water gap where erosion by the Columbia River was able to keep pace with folding, faulting and uplifting across the Saddle Mountain anticline". During Ice Age floods in which waters from the Channeled Scablands found passage to the Pacific Ocean here and at Wallula Gap, this opening was "repeatedly reamed out, which probably widened and steepened the walls of the gap". Strandlines from the floods can be seen on the basalt walls of the gap.

In aircraft piston engines, the valve guides are typically shaped in a tube with a flare at one end, so as to resemble in section, the letter "T". Their replacement involves removing the worn part by driving it out with a hammer and specifically-shaped punch. Installation involves heating the cylinder (with its integral head) and freezing the valve guide so as to ease insertion, and then driving the new guide in quickly with a hammer. Once the parts return to room temperature the new valve guide will be solidly in place and ready to be reamed and honed to proper diameter.

The distal tibial attachment of the sMCL can be found under these identified tendons, making up the floor of the pes anserine bursa, 6 cm distal to the joint line. Once identified, the remaining soft tissue is removed from the attachment site. An eyelet pin is then drilled through attachment site transversely through the tibia, making sure the starting point is located at the posterior aspect of the site to ensure better biomechanical outcomes. Over the eyelet pin, a 7-mm reamer (6 mm considered in smaller patients) is reamed to a depth of 25 mm.

James developed a family of early rifled projectiles and a rifling system for artillery that saw use by the Union Army in the American Civil War. The weapon most correctly called a James rifle is a weapon commonly called a 14-pounder James rifle, usually made of bronze; this was the only gun designed entirely by James that saw extensive service. Except for the material, it closely resembles the wrought iron 3-inch Ordnance rifle that saw more widespread use. His rifling system was used to convert pre-war smoothbore M1841 6-pounder field guns,Some were also reamed out to 3.8 inches for the 14-pound James projectile.

A picture of the most common pegs made from ebony wood (Swiss model) for violin At the scroll end, the strings ride over the nut into the pegbox, where they wind around the tuning pegs. Strings usually have a colored "silk" wrapping at both ends for identification and to provide friction against the pegs. The peg shafts are shaved to a standard taper, their pegbox holes being reamed to the same taper, allowing the friction to be increased or decreased by the violinist applying appropriate pressure along the axis of the peg while turning it. Various brands of peg compound or peg dope help keep the pegs from sticking or slipping.

In the context of traditional gunsmithing, one way to make gun barrels has been to make them from skelp, like one would make other pipe or tubing. Barrels made from skelp have typically been thought of as having inferior quality. (Pipe made from skelp can be perfectly acceptable in quality, but a gun barrel must withstand much higher pressures than most pipes.) Cheap gun barrels could be made this way in the Damascus method—wrapping the skelp around a mandrel to make spirals which were then hammered and forged into a tube. The mandrel was then removed, the interior reamed, and the exterior filed until a finished tube was complete.

When drilling deep holes, which require drilling fluid, the hole must be cased (fitted with a cylindrical lining), since otherwise the drilling fluid will be absorbed by the snow and firn. The casing has to reach down to the impermeable ice layers. To install casing a shallow auger can be used to create a pilot hole, which is then reamed (expanded) until it is wide enough to accept the casing; a large diameter auger can also be used, avoiding the need for reaming. An alternative to casing is to use water in the borehole to saturate the porous snow and firn; the water eventually turns to ice.

Using a special pair of pliers, the reed maker presses down the cane, making it conform to the shape of the mandrel. (The steam generated by the heated mandrel causes the cane to permanently assume the shape of the mandrel.) The upper portion of the cavity thus created is called the "throat", and its shape has an influence on the final playing characteristics of the reed. The lower, mostly cylindrical portion will be reamed out with a special tool called a reamer, allowing the reed to fit on the bocal. After the reed has dried, the wires are tightened around the reed, which has shrunk after drying, or replaced completely.

The driller increases the diameter according to the outer diameter of the conduit and to achieve optimal production. The third stage places the product or casing pipe in the enlarged hole by way of the drill stem; it is pulled behind the reamer to allow centering of the pipe in the newly reamed path. Horizontal directional drilling is done with the help of a viscous fluid known as drilling fluid. It is a mixture of water and, usually, bentonite or polymer continuously pumped to the cutting head or drill bit to facilitate the removal of cuttings, stabilize the bore hole, cool the cutting head, and lubricate the passage of the product pipe.

These tubes were of particularly small diameter, only and especially numerous, a total of 3,744 being used in some boilers. The tubes were arranged in 24 rows to a bank, each requiring a different length of tube, and 78 rows per drum. All tubes were curved to the same radius, facilitating repair and replacement on board, but requiring the tube holes in the drums to be reamed to precise angles on a jig during manufacture. This small tube diameter gave a high heating surface, but probably too much: the ratio of surface to volume became excessive and gas flow through the tube banks was affected, giving the boiler furnaces something of a reputation as poor burners.

When Sawyer is confronted by the dealer's brother in his office the next morning, Sawyer reveals himself as a master martial artist who uses two rings with hooks on the end and a kick to the throat to kill his adversaries. When Jack learns he must throw a match when he faces Dark Cloud as part of the deal with Superfights, Jack refuses to give up and wins the fight. However, after being reamed out by Sawyer for disobeying him, he offers Jack a second chance. This is where Jack learns that the Superfights are more than the sport as he is forced to join Budokai, Night Stalker, and Dark Cloud to get protection from a local Chinese restaurant that he's eaten at.

The two others were to be reused to house a pair of Krupp K5 artillery pieces, reamed out to a smooth bore with a diameter of , which were to use a new type of long-range rocket-propelled shell. A pair of Rheinbote missile launchers were to be installed at the tunnel entrances. These plans were soon abandoned as Allied ground forces advanced towards Mimoyecques, and on 30 July the Organisation Todt engineers were ordered to end construction work.. The Allies were unaware of this and mounted further attacks on the site as part of the United States Army Air Forces experimental Operation Aphrodite, involving radio-controlled B-24 Liberators packed with explosives. Two such attacks were mounted but failed; in the second such attack, on 12 August, Lt Joseph P. Kennedy, Jr. – the elder brother of future US President John F. Kennedy – was killed when the drone aircraft exploded prematurely.

323 in) as found in the 8×57mm IS. The new cartridge used the same bullet and therefore only the chamber of the rifle had to be modified (reamed out by 2 mm plus 1 mm of neck extension) to accommodate the slightly longer case. This operation was easily performed on Gewehr 98 and Karabiner 98k rifles. It also meant that owners of rifles so re-chambered could not then be used as an "ad hoc" reserve to the German Army (that was one of the issues of concern at Versailles of reserves of male civilians disguised as rifle club members with their own privately owned rifles - being trained as reinforcements in time of war as the German Army was by that Treaty limited not only to 100,000 men but also to the number of rifles it could possess) as standard military ammunition could not now be safely fired in rifles so converted.