Sentences Generator
And
Your saved sentences

No sentences have been saved yet

79 Sentences With "exfoliated"

How to use exfoliated in a sentence? Find typical usage patterns (collocations)/phrases/context for "exfoliated" and check conjugation/comparative form for "exfoliated". Mastering all the usages of "exfoliated" from sentence examples published by news publications.

I chemically exfoliated, electronically filed, and callus-treated at the salon.
After a few sessions, skin appears softer, more supple and gently exfoliated.
Also, I don't think it exfoliated well enough, especially around my nose.
I exfoliated, I spot-treated, I did nothing except cleanse and moisturize.
Make sure skin is gently exfoliated and plied with a rich shaving cream.
I see many women in L.A. who have exfoliated so much they look shiny.
The woman who'd had the skin exam left looking fresh and unburdened, her anxiety exfoliated.
It further exfoliated my feet while infusing vitamins and moisture back into the skin. Whoa!
Biba: So now that you&aposre exfoliated, we&aposre going to get into lymphatic drainings.
All of Foreo's palm-sized devicesleave your skin feeling soft and exfoliated in just two minutes.
Oiled and pumped, exfoliated and massaged in preparation for upcoming competitions, these sculpted specimens focus fanatically on self-care.
I might feel bad, but at least I'm clean, exfoliated, and going to be sleeping in a freshly made bed.
The same went for lips, which Philips gently exfoliated before adding a subtle layer of sheer gloss (Dior's Lip Glow Pomade).
I assumed the trucks that came to empty the green bins next to the giant stack of exfoliated palms would ping the city.
Healthy skin is nicely exfoliated, but it turns out the dead skin on the top layer does give you a bit of sun protection.
Today, my bedtime skincare routine consists of an assortment of serums and moisturizers that can only be applied to a clean and exfoliated face. 
"I try and make sure that my skin is always exfoliated," the model explains, adding that she follows with a rich body butter to stay moisturized.
New York City-based dermatologist Hadley King, MD, says to make sure the skin is soft and gently exfoliated before attempting any kind of hair removal in the area.
That night, I took her loofah and some St. Ives Apricot Scrub and exfoliated the shit out of my skin from my dirty neck down to my dirty feet.
That's thanks to a close-up of Gomez's perfectly exfoliated and moisturized lips, which alternate between mouthing the words to her new tune and seductively nibbling on her manicured fingers.
They discovered that pulp cells in these third molars did indeed make dentin, but the cells found in baby teeth, called SHED (stem cells from human exfoliated deciduous teeth), had slightly different properties.
In the text messages you can see her coming to the horrific realization that because "babe" decided to wait until the last minute to cancel on her, she "shaved, exfoliated and moisturized" for nothing.
And while skin care also isn't on the prescribed list, I treated my face to a charcoal peel-off mask because I don't want to live in a world where Taylor frowns upon exfoliated pores.
To begin, Kendal and her team used cleansing wipes to remove any residue from the skin, exfoliated around the nose and chin, and then applied MAC's Prep+ Prime Fix + before lathering on Mineralized Charged Water Moisture Gel.
If you've over-exfoliated, drunk too much, or finished off an entire bag of candy corn in one sitting in the last few weeks — and your complexion is paying for it — now's the time to stop the guilt trip.
On top of all of the above, I also got a facial at Sacred Skincare, during which the aesthetician confirmed my suspicions that I've got nice skin that would be better if I only exfoliated once in a while (oops).
I bought the charcoal face wipes purely for the novelty factor and later used them as a toner rather than cleanser — the slightly rough texture on one side gently exfoliated my tired, city-worn skin and left it super-soft.
Therefore, TMDCs can be easily exfoliated into atomically thin layers through various methods. TMDCs show layer-dependent optical and electrical properties. When exfoliated into monolayers, the band gaps of several TMDCs change from indirect to direct, which lead to broad applications in nanoelectronics, optoelectronics, and quantum computing .
In addition, exfoliated HDPE/LNR/montmorillonite nanocomposites were successfully achieved by using emulsion dispersion technique as well.
Weak anti-localization is observed in this material, but not in exfoliated graphene produced by the drawing method. Large, temperature-independent mobilities approach those in exfoliated graphene placed on silicon oxide, but lower than mobilities in suspended graphene produced by the drawing method. Even without transfer, graphene on SiC exhibits massless Dirac fermions. The graphene–substrate interaction can be further passivated.
The NbSe2 thickness can be accurately controlled by varying the temperature of Se powder. NbSe2 monolayers can also be exfoliated from the bulk or deposited by molecular beam epitaxy.
Estrogen induces the intermediate and superficial cells to fill with glycogen. Several layers of superficial cells exist that consist of large, flattened cells with indistinct nuclei. The superficial cells are exfoliated continuously.
The further nuclear shrinkage and formation of mucopolysaccharides are distinct characteristics of superficial cells. The mucopolysaccharides form a keratin-like cell scaffold. Fully keratinized cells without a nucleus are called "floes". Intermediate and superficial cells are constantly exfoliated from the epithelium.
The titanium group elements form layered hexagonal crystals that can be exfoliated to monolayers. These contain ditelluride Te22- units. These layered compounds can be intercalated to form non-stoichiometric compounds with zinc, copper or cadmium by heating with the metals. Actinide telluride phosphides contain diphosphide anions P2.
When ordered aluminasilicate sheets are lying parallel to each other, separated with polymer chains of certain type, the system is classified as intercalated nanocomposite. If separation of the layers is so significant, that they are no longer lying opposite to one another, but randomly ordered, then one get the exfoliated nanocomposite.
Other inert microderm crystals include magnesium oxide, sodium chloride, and sodium bicarbonate. All ultra-fine white crystals are disposable and should be discarded after each use. The microdermabrasion vacuum removes the crystals and exfoliated skin cells. Inhalation of crystals should be avoided and masks are sometimes worn by the operator doing the treatment.
The disadvantage of this technique is that it is not scalable for large-scale production. Boron nitride sheets can be also exfoliated by ball milling, where shear forces are applied on the face of bulk boron nitride by rolling balls. This technique yields large quantities of low- quality material with poor control over its properties.
Normally, exfoliation is restricted to a particular area and normal skin will replace the exfoliated parts, so no treatment is needed. Since keratolysis exfoliativa is caused by friction, detergents, and solvents, these factors should be avoided. Creams, especially those with silicone and lactic acid are also helpful. In severe cases, photochemotherapy is an option.
Most ucfDNA is derived from urogenital tract cells. Approximately over 3×106 urogenital tract cells are exfoliated into urine per day. These cells undergo apoptosis (primarily) or necrosis to release fragmented nucleic acids. Necrotic lymphocytes, kidney, prostate, and urinary bladder contribute to high-molecular-weight DNA, while apoptotic cells from the urogenital tract contribute to low-molecular-weight DNA.
Pressure release could have caused the exfoliated granite sheets shown in the picture. In pressure release, also known as unloading, overlying materials (not necessarily rocks) are removed (by erosion, or other processes), which causes underlying rocks to expand and fracture parallel to the surface. Intrusive igneous rocks (e.g. granite) are formed deep beneath the Earth's surface.
Sb2Te3 has a rhombohedral crystalline structure. The crystalline material comprises atoms covalently bonded to form 5 atom thick sheets (in order: Te-Sb-Te-Sb-Te), with sheets held together by van der Waals attraction. Due to its layered structure and weak inter-layer forces, bulk antimony telluride may be mechanically exfoliated to isolate single sheets.
In such a case LLA prevents the permanent molars from migrating mesially (forward) thus blocking off the eruption space for the premolar teeth. LLA is also used in order to maintain the so-called "Leeway space", which is the extra space available in the arch when the deciduous molars are exfoliated and replaced by smaller permanent premolars.
Niobium disulfide is the chemical compound with the formula NbS2. It is a black layered solid that can be exfoliated into ultrathin grayish sheets similar to other transition metal dichalcogenides. These layers exhibit superconductivity, where the transition temperature increases from ca. 2 to 6 K with the layer thickness increasing from 6 to 12 nm, and then saturates with thickness.
Highly anisotropic thermal conductivity has been measured in three major principal crystal orientations and is effected by strain applied across the lattice. Exfoliated black phosphorus sublimes at 400 °C in vacuum. It gradually oxidizes when exposed to water in the presence of oxygen, which is a concern when contemplating it as a material for the manufacture of transistors, for example.
Ctenophorus rufescens, commonly known as the Rusty dragonWilson, S., Swan, G. (2013) A Complete Guide to Reptiles of Australia, New Holland Publishers, Sydney, New South Wales, or Rusty-crevice dragon is a species of agamid lizard occurring in granite outcrops featuring open expanses strewn with exfoliated rock, in arid north-western South Australia, south-western Northern Territory and adjacent Western Australia.
Phosphorene production from plasma etching is also reported. In scotch-tape-based microcleavage, phosphorene is mechanically exfoliated from a bulk of black phosphorus crystal using scotch-tape. Phosphorene is then transferred on a Si/SiO2 substrate, where it is then cleaned with acetone, isopropyl alcohol and methanol to remove any scotch tape residue. The sample is then heated to 180 °C to remove solvent residue.
A young boy after losing two baby teeth, exfoliated in response to the permanent teeth beneath, which will erupt through the gums to take their place. Normal loss of primary teeth typically begins around age six and continues until age twelve. The upper and lower central incisors are shed at age six to seven years. The upper and lower lateral incisors are shed at seven to eight years.
Exfoliated graphite nano-platelets (xGnP) are new types of nanoparticles made from graphite. These nanoparticles consist of small stacks of graphene that are 1 to 15 nanometers thick, with diameters ranging from sub-micrometre to 100 micrometres. The X-ray diffractogram of this material would resemble that of graphite, in that the 002 peak would still appear at ~26o 2 theta. However, the peak would appear considerably smaller and broader.
Poorly connected, worn or frayed electrical connections may present a shock or fire hazard; worn hoses and masks may reduce the effectiveness of the unit. Most units employ some type of filtration, and the filters must be cleaned or replaced on a regular schedule. Sometimes HEPA filters may be purchased or modified for asthma or other allergy clients. Hoses and masks accumulate exfoliated skin, particulate matter, and can even develop mold.
Tin(II) sulfide is a dark brown or black solid, insoluble in water, but soluble in concentrated hydrochloric acid. Tin (II) sulfide is insoluble in (NH4)2S. It has a layer structure similar to that of black phosphorus. As per black phosphorus, tin(II) sulfide can be ultrasonically exfoliated in liquids to produce atomically thin semiconducting SnS sheets that have a wider optical band gap (>1.5 eV) compared to the bulk crystal.
Like many TMDCs, is a layered material with strong in-plane bonding and weak out-of-plane interactions. These interactions lead to exfoliation into two-dimensional layers of single unit cell thickness. The most common form of these TMDCs have trilayers of molybdenum sandwiched between selenium ions causing a trigonal prismatic metal bonding coordination, but it is octahedral when the compound is exfoliated. The metal ion in these compounds is surrounded by six ions.
Hafnium disulfide is an inorganic compound of hafnium and sulfur. It is a layered dichalcogenide with the chemical formula is HfS2. A few atomic layers of this material can be exfoliated using the standard Scotch Tape technique (see graphene) and used for the fabrication of a field-effect transistor. High-yield synthesis of HfS2 has also been demonstrated using liquid phase exfoliation, resulting in the production of stable few-layer HfS2 flakes.
In vapor assisted techniques, spin coated or exfoliated lead halide is annealed in the presence of methylammonium iodide vapor at a temperature of around 150 °C. This technique holds an advantage over solution processing, as it opens up the possibility for multi-stacked thin films over larger areas. This could be applicable for the production of multi-junction cells. Additionally, vapor deposited techniques result in less thickness variation than simple solution processed layers.
Living tree bark enveloping barbed wire The rhytidome is the most familiar part of bark, being the outer layer that covers the trunks of trees. It is composed mostly of dead cells and is produced by the formation of multiple layers of suberized periderm, cortical and phloem tissue. The rhytidome is especially well developed in older stems and roots of trees. In shrubs, older bark is quickly exfoliated and thick rhytidome accumulates.
Large quantities of width- controlled GNRs can be produced via graphite nanotomy, where applying a sharp diamond knife on graphite produces graphite nanoblocks, which can then be exfoliated to produce GNRs. GNRs can also be produced by "unzipping" or axially cutting nanotubes. In one such method multi-walled carbon nanotubes were unzipped in solution by action of potassium permanganate and sulfuric acid. In another method GNRs were produced by plasma etching of nanotubes partly embedded in a polymer film.
Mesothelioma is generally resistant to radiation and chemotherapy treatment. Long-term survival and cures are exceedingly rare. Treatment of malignant mesothelioma at earlier stages has a better prognosis. Clinical behavior of the malignancy is affected by several factors including the continuous mesothelial surface of the pleural cavity which favors local metastasis via exfoliated cells, invasion to underlying tissue and other organs within the pleural cavity, and the extremely long latency period between asbestos exposure and development of the disease.
The tooth is also exfoliated and heavily mineralised and the preservation is not consistent with other bone and teeth in the same level. There are stone artefacts with hair and blood adhering, but in the same layers there are megafauna bones with not even traces of protein remaining ; ; ; . These inconsistent finds suggest that the process of site formation may have involved some mixing of materials of different ages. This leads to the second important detail, the stratigraphy.
Topical tretinoin is only for use on skin and it should not be applied to eyes or mucosal tissues. Common side effects include skin irritation, redness, swelling, and blistering. If irritation is a problem, a decrease in the frequency of application to every other or every third night can be considered, and the frequency of application can be increased as tolerance improves. The fine skin flaking that is often seen can be gently exfoliated with a washcloth.
Niobium diselenide or niobium(IV) selenide is a layered transition metal dichalcogenide with formula NbSe2. Niobium diselenide is a lubricant, and a superconductor at temperatures below 7.2 K that exhibit a charge density wave (CDW). NbSe2 crystallizes in several related forms, and can be mechanically exfoliated into monatomic layers, similar to other transition metal dichalcogenide monolayers. Monolayer NbSe2 exhibits very different properties from the bulk material, such as of Ising superconductivity, quantum metallic state, and strong enhancement of the CDW.
Niobium diselenide exists in several forms, including 1H, 2H, 4H and 3R, where H stands for hexagonal and R for rhombohedral, and the number 1, 2, etc., refers to the number of Se-Nb-Se layers in a unit cell. The Se-Nb-Se layers are bonded together with relatively weak van der Waals forces, and can be exfoliated into 1H monolayers. They can be offset in a variety of ways to make different crystal structures, the most stable being 2H.
The rest is made up of transudate from the vaginal walls and secretions from glands (Skene's and Bartholin's). The solid components are exfoliated epithelial cells from the vaginal wall and cervix as well as some of the bacteria that inhabit the vagina. These bacteria that live in the vagina do not typically cause disease. In fact, they can protect the individual from other infectious and invasive bacteria by producing substances such as lactic acid and hydrogen peroxide that inhibit growth of other bacteria.
A recent cross-sectional study showed that hypodontia patients have more difficulties in chewing, especially if the deciduous teeth associated with the missing permanent teeth had been exfoliated. Despite currently limited evidence to support this statement, it is plausible that hypodontia may pose functional limitations, which eventually affect that individual's general well-being and quality of life. Hypodontia can indeed pose limitations on the chewing ability of a patient. The condition can be associated with split in the upper lips – a condition known as oral cleft.
Hexagonal boron nitride can be exfoliated to mono or few atomic layer sheets. Due to its analogous structure to that of graphene, atomically thin boron nitride is sometimes called “white graphene”. Mechanical properties. Atomically thin boron nitride is one of the strongest electrically insulating materials. Monolayer boron nitride has an average Young's modulus of 0.865TPa and fracture strength of 70.5GPa, and in contrast to graphene, whose strength decreases dramatically with increased thickness, few-layer boron nitride sheets have a strength similar to that of monolayer boron nitride.
Chemical functionalization of boron nitride involves attaching molecules onto the outer and inner layers of bulk boron nitride. There are three types of BN functionalization: covalent, ionic and or non- covalent. Layers are exfoliated by placing the functionalized BN into a solvent and allowing the solvation force between the attached groups and the solvent to break the van der Waal forces between BN layers. This method is slightly different from solvent exfoliation, which relies on the similarities between the surface energies of the solvent and boron nitride layers.
These features indicate that the interplanar distance in exfoliated graphite is similar to that of the parent graphite, but the stack size (of graphene layers) is small. Since xGnP is composed of the same material as carbon nanotubes, it shares many of the electrochemical characteristics, although not the tensile strength. The platelet shape, however, offers xGnP edges that are easier to modify chemically for enhanced dispersion in polymers. Composite materials made with polymers, like plastics, nylon, or rubber, can be made electrically or thermally conductive with the addition of small amounts of xGnP.
Due to its capability to penetrate skin, glycolic acid finds applications in skin care products, most often as a chemical peel. Physician-strength peels can have a pH as low as 0.6 (strong enough to completely keratolyze the epidermis), while acidities for home peels can be as low as 2.5. Once applied, glycolic acid reacts with the upper layer of the epidermis, weakening the binding properties of the lipids that hold the dead skin cells together. This allows the stratum corneum to be exfoliated, exposing live skin cells.
Double O Arch Partition Arch Navajo Arch The Devils Garden Trail meanders between sheer walls of sandstone fins. The fins were created when vertical cracks in a thick layer of sandstone were eroded and widened by water—either scoured by runoff from rainfall and snow melt, or pried and exfoliated by ice expansion. These stone formations may only last a few thousand years—a short time on the geologic time scale. The events that led to the arches, fins, and other rock shapes began about 300 million years ago, when seas periodically covered the area.
The scientists also found that the proportion of micronucleated exfoliated cells is related to the site within the oral cavity where the paan is kept habitually and to the number of betel quids chewed per day. In related studies, the scientists reported that oral leukoplakia shows a strong association with habits of paan chewing in India. Some follow-up studies have shown malignant transformation of a proportion of leukoplakias. Oral submucous fibrosis and lichen planus, which are generally accepted to be precancerous conditions, appear to be related to the habit of chewing paan.
While there is a lack of craniofacial-specific clinical trials regarding stem cell therapies, there has been great effort in identifying craniofacial-specific stem cell populations, precursor cells that can give rise to many specific structures of the skull. Such stem cells include bone marrow mesenchymal stem cells (BMMSC), adipose-derived mesenchymal stem cells (AMCs), muscle satellite cells (MuSCs), periodontal ligament stem cells (PDLSCs), and stem cells from human exfoliated deciduous (SHED teeth). The following section will outline the two most promising stem cell populations in craniofacial bone regeneration.
Cornelia Parker's meteorite shower firework (pieces of meteorites loaded in firework) was launched by Novoselov breathing on graphene gas sensor (which changed the resistance of graphene due to doping by water vapour). Graphene was obtained through exfoliation of graphite which was extracted from a drawing of William Blake. Novoselov suggested that he also exfoliated graphite obtained from the drawings of other prominent artists: John Constable, Pablo Picasso, J. M. W. Turner, Thomas Girtin. He said that only microscopic amounts (flake size less than 100 micrometres) was extracted from each of the drawings.
Macgregor took exfoliated cell smears using the Papanicolaou stain, interpreted them, and trained the team in the technique. In 1963, she received an MD by thesis for her work. In an article in the British Medical journal co-authored by Macgregor and Baird they stated that cervical cytology has now passed beyond the experimental stage' and that cervical cancer could largely be prevented by cytological detection and treatment of a pre-invasive stage. Having seen the effects of cervical cancer in practice Macgregor took the findings of research and put them into practice, encouraging women to undergo screening.
While the pump creates a high- pressure stream of inert crystals (aluminum oxide, magnesium oxide, sodium chloride, or sodium bicarbonate) to abrade the skin, the vacuum removes the crystals and exfoliated skin cells. Alternatively, the inert crystals can be replaced by a roughened surface of the tip in the diamond microdermabrasion system. Unlike the older crystal microdermabrasion system, the diamond microdermabrasion does not produce particles from crystals that may be inhaled into patients’ nose or blown into the eyes. Hence, diamond microdermabrasion is regarded as having higher safety for use on areas around the eyes and lips.
Stem cells from human exfoliated deciduous teeth (SHED) are similar to DPSCs in the sense that they are both derived from the dental pulp, but SHED are derived from baby teeth, whereas DPSCs are derived from adult teeth. SHED are a population of multipotent stem cells that are easily collected, as deciduous teeth either shed naturally or are physically removed in order to facilitate the proper growth of permanent teeth. These cells can differentiate into osteocytes, adipocytes, odontoblast, and chondrocytes in vitro. Recent work has shown the enhanced proliferative capabilities of SHED when compared with that of dental pulp stem cells.
Above the pressure of 10.5 GPa magnetoresistance disappears and the material becomes a superconductor. At 13.0 GPa the transition to superconductivity happens below 6.5 K. WTe2 was predicted to be a Weyl semimetal and, in particular, to be the first example of a Type II Weyl semimetal, where the Weyl nodes exist at the intersection of the electron and hole pockets. It has also been reported that terahertz- frequency light pulses can switch the crystal structure of WTe2 between orthorhombic and monoclinic by altering the material’s atomic lattice. Tungsten ditelluride can be exfoliated into thin sheets down to single layers.
Some other potential sources of postnatal stem cells in the oral environment are the tooth germ progenitor cells (TGPCs), dental follicle stem cells (DFSCs), salivary gland stem cells (SGSCs), stem cells from human exfoliated deciduous teeth (SHED), periodontal ligament stem cells (BMSCs), oral epithelial stem cells (OESCs), gingival-derived mesenchymal stem cells (GMSCs) and periosteal stem cells (PSCs). The second component of tissue engineering focuses on growth factors or other tissue-inducing mediators. By definition, stem cells are capable to differentiate into various cell phenotypes based on their lineage and exposure to the environmental stimuli, for instance, growth factors, extracellular matrix, hypoxia, or other conditions. Therefore, the environment is an important factor in regulating tissue differentiation.
In July 2020 scientists reported that they have transformed the abundant diamagnetic material into a ferromagnetic one by inducing voltage, which may lead to applications in devices such as solar cells or magnetic data storage. Researchers at Trinity University Dublin, Ireland have demonstrated that FeS2 can be exfoliated into few-layers just like other two-dimensional layered materials such as graphene by a simple liquid-phase exfoliation route. This is the first study to demonstrate the production of non-layered 2D-platelets from 3D bulk FeS2. Furthermore, they have used these 2D-platelets with 20% single walled carbon-nanotube as an anode material in lithium-ion batteries, reaching a capacity of 1000 mAh/g close to the theoretical capacity of FeS2.
As the clay particles approach each other to within two times the thickness of the polymer layers, the loops and tails of the polymers on one surface will start to block those on the other surface, leading to a decrease in configurational entropy. This is unfavorable because it increases the Gibbs free energy of the system, and it will be more energetically favorable for the colloid particles to remain farther apart.The morphology of polymer-clay aggregates is dictated by the entropic and enthalpic contributions to the energy of their interactions. Three possible morphologies depicted above include (1) intercalated, in which polymer molecules alternate with clay layers, (2) flocculated, in which the alternating clay/polymer layers begin to aggregate, and (3) exfoliated, in which a polymer matrix supports individual, separated clay layers.
Tamamushi Shrine at Hōryū-ji; height ; National Treasure Detail of roof Right doors A bodhisattva hangs his robe upon a tree before offering his life to feed a tigress and her cubs; height , width The is a miniature shrine owned by the Hōryū-ji temple complex of Nara, Japan. Its date of construction is unknown, but estimated to be around the middle of the seventh century. Decorated with rare examples of Asuka-period paintings, it provides important clues to the architecture of the time and has been designated a National Treasure. Consisting of a low rectangular dais supporting a plinth upon which stands a miniature building tall, the Tamamushi Shrine derives its name from the iridescent wings of the tamamushi beetle with which it was once ornamented, but which have now exfoliated.
The broad- headed snake (Hoplocephalus bungaroides) and the red-crowned toadlet (Pseudophryne australis) inhabit exfoliated rock on the sandstone plateaus. This is a habitat that has been dramatically degraded and fragmented in other Sydney regions but which is relatively undisturbed within the park. Bushrock collection, usually for garden use, is considered to be a key threatening process for the snake and toadlet as they use the rocks for shelter. There are non-native fauna species found within the protected area include feral cats and dogs, rabbits, foxes, black rat, deer and mosquito fish. The following species are of high priority as most of their habitats are in the Woronora Plateau: broad-headed snake (Hoplocephalus bungaroides), Littlejohn’s tree frog (Litoria littlejohni), spotted-tailed quoll (Dasyurus maculatus), large- footed myotis (Myotis macropus), east-coast free-tailed bat (Mormopterus norfolkensis), green tree frog (Litoria caerulea), grey-headed flying fox (Pteropus poliocephalus) and the southern emu-wren (Stipiturus malachurus).

No results under this filter, show 79 sentences.

Copyright © 2024 RandomSentenceGen.com All rights reserved.