Sentences Generator
And
Your saved sentences

No sentences have been saved yet

"tenon" Definitions
  1. an end of a piece of wood that has been cut to fit into a mortise so that the two are held together
"tenon" Synonyms
dovetail join fit interlock joint link mortise unite splice fit together connect couple interconnect yoke attach fasten lock bind mesh interlace

314 Sentences With "tenon"

How to use tenon in a sentence? Find typical usage patterns (collocations)/phrases/context for "tenon" and check conjugation/comparative form for "tenon". Mastering all the usages of "tenon" from sentence examples published by news publications.

type: All Declarative Interrogative Exclamative

structure: All Simple Compound Complex Compound-Complex

length: All <=10 words 10-20 words 20-30 words 30-50 words

" Similarly, at 153A, the clue is "Mortise partner," and the answer is TENON, as in "mortise and tenon.
But here's the thing: A pin is a kind of a tenon.
The FRC said proceedings against Russell McBurnie, RSM Tenon Group plc's former Finance Director, are still ongoing.
Boden, who was PWC's senior audit partner for RSM Tenon, was fined 114,750 pounds and given a severe reprimand.
The record amount agreed by a tribunal so far is 5.1 million pounds for PwC over its audit of RSM Tenon.
The researchers, led by Marie-Sylvie Doutre of Hopital Tenon and Sorbonne Universite in Paris, didn't respond to requests for comment.
Yes, you don't talk about a "mortise and tenon" when you're making a dovetail joint; you talk about pins and tails.
RSM Tenon, which had been listed on the London stock market, collapsed into administration in 2013 and its assets were taken over by rival Baker Tilly.
PwC, one of the big four, was hit with a record 5.1 million pound ($6.8 million) misconduct fine in August for the way it audited collapsed accounting firm RMS Tenon.
The "Big Four" global accounting giants Deloitte, PwC, KPMG and Ernst & Young, which offer services to companies ranging from auditing to consultancy, operate in Britain with Thornton, BDO and RSM Tenon among their smaller rivals.
Russell McBurnie, who left London-listed RSM Tenon in 2012 before it collapsed into administration in 2013, admitted "extensive misconduct" in relation to the preparation and approval of the firm's 2011 financial statements, the FRC said.
LONDON, Aug 16 (Reuters) - Britain's accounting watchdog has fined audit firm PricewaterhouseCoopers LLP 5.1 million pounds ($6.56 million) and given it a severe reprimand after it admitted misconduct over its audit of collapsed accounting firm RSM Tenon.
You'll want to rebuild the barn, make it a post-and-beam mortise-and-tenon with queen posts, and don't put a ridgepole in to support the rafters, you won't need that, and put plenty of ventilation louvres along the forebay walls, and get one of those steel Martin silos in, too, and maybe a manure-cleaning system, and clear out the burdock growing through the windows, and the stalls will need new railings, and the corn crib needs new chicken wire, and the old wind pump needs lubrication and a new valve, and the tractor needs a new camshaft; you'll want to intercrop carrots in with the rye and barley, get them in close to protect the young seedlings; and so on and so forth, while out in the kitchen the percolator sputtered.
A tenon is a projection on the end of a timber for insertion into a mortise. Usually, the tenon is taller than it is wide. There are several kinds of tenon: ;Stub tenon:short, the depth of which depends on the size of the timber; also a tenon that is shorter than the width of the mortised piece so the tenon does not show (as opposed to a "through tenon"). ;Through tenon:a tenon that passes entirely through the piece of wood it is inserted into, being clearly visible on the back side.
Generally, the size of the mortise and tenon is related to the thickness of the timbers. It is good practice to proportion the tenon as one third the thickness of the rail, or as close to this as is practical. The haunch, the cut-away part of a sash corner joint that prevents the tenon coming loose, is one third the length of the tenon and one-sixth of the width of the tenon in its depth. The remaining two-thirds of the rail, the tenon shoulders, help to counteract lateral forces that might tweak the tenon from the mortise, contributing to its strength.
In its most basic form, a mortise and tenon joint is both simple and strong. There are many variations of this type of joint, but the basic mortise and tenon has two components: #the mortise hole, and #the tenon tongue. The tenon, formed on the end of a member generally referred to as a rail, fits into a square or rectangular hole cut into the other, corresponding member. The tenon is cut to fit the mortise hole exactly.
The tenon is formed on the jamb and the mortise to receive the tenon is formed on the curved member. The mortise is increased in size to receive a pair of folding wedges each side of the tenon. The hammer-headed key is used where there is no straight member to form the tenon. It is difficult to form a strong tenon on curved cut timber as the short grain there will weaken it, so two mortise sockets are formed one in each piece and a separate tenon piece called a key is formed to fit.
Today, the Hôpital Tenon in Paris is named after him, as is the capsule of Tenon, a membrane that envelops the posterior five-sixths of the eyeball.Practical anatomy by John Clement Heisler He provided a description of the "capsule of Tenon" in 1805.
Corner bridle joint T-bridle joint A bridle joint is a woodworking joint, similar to a mortise and tenon, in that a tenon is cut on the end of one member and a mortise is cut into the other to accept it.Bridle Joints, WoodworkDetails.com The distinguishing feature is that the tenon and the mortise are cut to the full width of the tenon member. The corner bridle joint (also known as a slot mortise and tenon) joins two members at their respective ends, forming a corner.
Example detail of Hammer-headed tenon.'' Example detail of Hammer-headed key.'' Hammer-headed tenon joints are one method that can be used to join curved members of joinery components. The hammer-headed tenon is used to join a curved member to a straight member such as a curved head member to a jamb.
Diagram of a mortise (on left) and tenon joint Tusked through tenons used on a French granary. 1) Through tenon and 2) mortise as a shouldered joint A mortise (occasionally mortice) and tenon joint connects two pieces of wood or of material. Woodworkers around the world have used it for thousands of years to join pieces of wood, mainly when the adjoining pieces connect at right angles. Mortise and tenon joints are strong and stable joints that can be used in many projects.
Tenonitis is an eye disease, an inflammation of the Tenon capsule.
Each green marble column was high and in diameter when finished. To prevent the columns from twisting or slipping, a mortise and tenon was used. A mortise approximately deep was created in the floor and a tenon carved on the bottom of the column base. A small amount of mortar mixed with small flat discs of metal was used to help fix the tenon into the mortise.
The Super Real EGF (flametop) and EG series higher end models featured nitrocellulose lacquer finishes and fret edge binding and some of the Super Real lower end models also featured fret edge binding. Medium tenon neck joints with dowel reinforcements were used up until 1981 and standard Gibson style long and medium tenon neck joints were used after 1981. The medium tenon neck joints with dowel reinforcements were very similar to the Gibson long tenon neck joints that were used in the early 1970s before Gibson switched to using a short tenon neck joint. Some Greco models featured chambered (not solid) body designs up to the early 1980s, which weighed less than a regular solid body model and also had a slight semi acoustic quality.
RSM Tenon was a professional services firm based in the United Kingdom, which was listed on the FTSE SmallCap Index and part of RSM Global. The company was formed from the merger of the Tenon Group with RSM Bentley Jennison in December 2009. The company offered risk management, tax, recovery, financial management and business advisory services. RSM Tenon had been the United Kingdom's seventh largest accounting firm, employing around 2,600 people in 35 offices across the United Kingdom. In November 2011, RSM Tenon was recognised as the ‘National Firm of the Year’ at the 2011 British Accountancy Awards.
Proust died 1935 and the Hôpital Tenon in Paris honours him with the "Pavillon Proust".
Tenon announced in December 2009 that it was merging with RSM Bentley Jennison in a £76 million deal.Tenon plans to buy RSM Bentley for up to £76.3m, Yorkshire Post, 9 December 2009. Retrieved 24 January 2012. Andy Raynor, chief executive of Tenon, initially headed the enlarged firm.
The earliest wooden truss connections consisted of mortise-and-tenon joints and were most likely crafted at the construction site with the posts. Since most early trusses were made from unseasoned posts, the subsequent shrinkage would create cracking at the mortise-and-tenon joints. Additionally, the mortise-and-tenon joints in older trusses were located at the weakest point in the post, accelerating failure. Much of the early truss connection designs anticipated structural behaviour under loads.
Proust died on 29 May 1935. Paris's Hôpital Tenon has been named the "Pavillon Proust" since 1971.
This construction technique relied extensively on structural support provided by peg-mortise-and-tenon joinery through the shell of the boat. This method of ship construction appears to have originated from the seafaring nations of the Mediterranean, although evidence of peg-mortise-and-tenon joinery later appears in Southeast Asia.
Jacques-René Tenon (, 21 February 1724 – 16 January 1816) was a French surgeon born near the town of Joigny.
A more recent innovation is the horizontal mortiser, which incorporates a router mounted statically on its side with the workpiece clamped to a multi-axis sliding table. This type of mortiser can produce either traditional mortise and tenon pairs, however it excels at floating (or 'loose') tenons. A floating tenon is where both the pieces of wood that are to be joined have aligned mortises cut into them and a separate piece of wood is milled into a fitted tenon which is glued into the two mortises.
Schematic diagram of the human eye showing. Sub-Tenon injection is an ocular route of drug administration. It involves administration of a medication to the area between the sclera and the Tenon capsule. Posterior sub-Tenons steroid injections (PSTSI) is used in the treatment of posterior ocular inflammation, such as chronic uveitis.
The Domino in action The Domino is a loose mortise and tenon joining tool manufactured by the German company Festool.
This gauge is used to scribe two lines simultaneously and is most commonly used to lay out mortise and tenon joinery.
It is attached with mortise and tenon joints and strengthened with oak pegs. The wales and the ramming timber are designed to interlock for extra strength. The bottom of the ram features a mortise cut into the ramming timber to fit the most forward end of the keel which was formed into a thick and long tenon.
The mortise and tenon joint is considered to be one of the strongest joints next to the common dovetail joint. They furnish a strong outcome and connect by either gluing or locking into place. The mortise and tenon joint also gives an attractive lookout. One drawback to this joint is the difficulty in making it due to the precise and tight cutting required.
The ceiling and some of the lath and plaster wall panels also did not survive the trip. A number of roof tiles were broken when being unloaded in Ingham. The meticulous mortise and tenon jointing was broken to allow for the removal of the frame and few if any mortice and tenon joints survive. Nails were used in the reassembly.
Special joining techniques can be used, such as screw, dowel, spring or mortise and tenon joints to produce pre-finished components or complete racks.
Sometimes both types are used in the same piece. Some rustic furniture makers use mortice and tenon construction; others simply nail or screw members together.
Whilst Morison Stoneham was acquired by Tenon (later known as RSM Tenon) one of his legacies that still exists today is Morison InternationalWalter Morison November 1919 - March 2009 a global association of professional service firms (accountants, auditors, tax and business advisers). He wrote an account of his life during the war, Flak and Ferrets - One Way to Colditz. Morison died on 26 March 2009.
This tool, first on sale in 2007, cuts mortises in the manner of a biscuit joiner. A drill-like rotating cutter cuts a round-ended mortise. Each plunge creates a mortise that is sized to accept a Domino loose tenon, creating joints in stock from wide. There are five cutter sizes (4 mm, 5 mm, 6 mm, 8 mm and 10 mm) for six different Domino tenon sizes.
RSM Tenon expansion plans on hold after merger , Accountancy Age, 1 April 2010 When Tenon was launched, financial audit could not be carried out by a PLC, so the auditors from the predecessor firms formed an associated partnership known as Blueprint Audit.Top 50: Consolidation is alive and well, Accountancy Age, 26 June 2001. Includes a list of firms acquired. The rules requiring strict separation were relaxed in March 2005.
Techniques that take advantage of the anisotropic properties of the materials include mortise and tenon joints (in natural composites such as wood) and Pi Joints in synthetic composites.
"Mint Collection" models with a K after the numeric price designation (e.g. PC-98K) came with factory- installed Kahler tremolo (vibrato) bridges. The "Mint Collection Series" features varied according to price, with some of the higher-end models, such as the EG58-120, model having most of the features of the "Super Real" higher- end models. Most of the "Mint Collection Series" had long-tenon neck joints, but some had medium long tenon neck joints.
The summer kitchen and barn, which were constructed at approximately the same time as the house, feature traditional mortise and tenon and pegged construction. The other structures were added subsequently.
See lañchenn. Tenon : Connects the pipes to the stocks of a pipe. Tenons are typically wrapped with waxed thread. Cork, o-rings, and other materials are also sometimes employed for this purpose.
The two-post door frame is made from wrought iron. The top and bottom horizontal bars are fixed to the vertical bars by wedged tenon. The frame bars are approximately thick and wide.
Frames can be constructed by several methods: cope and stick, mortise and tenon, bridle joint, or a simple butt joint. Cope and stick is the most common method, as it is more efficient to manufacture. Mortise and tenon is the strongest, and is often used for large doors which will have greater stresses imposed. Bridle joints are typically used in less formal work, as the exposed endgrain is considered unattractive; while butt joints, being weak, are only used on very small assemblies.
The correct use of a twybil is highly specialized, that of rapidly clearing out mortises. Mortises are rectangular holes used to take a tenon for several forms of joint, most obviously the common mortise and tenon joint. Mortises are always cut so that their long axis is along the grain of the wood. Traditionally these were first cut by drilling with a brace and bit to mark out each end, then the twybil used to break out the wood between them.
The Venus de Milo's arms are missing, for unknown reasons. There is a filled hole below her right breast that originally contained a metal tenon that would have supported the separately carved right arm.
Structures had standard parts and pre-cut, pre- measured timbers, which were assembled on the ground, adjusted to fit on site, raised in place, and locked into place with pegs and mortise and tenon joints.
Kucan is the author of the novel Full Contact: The Collected Stories. He has also written blogs for his theater company A Public Fit, as well as The Huffington Post, The Discerning Brute, and Mortise & Tenon.
Early Egyptians also knew how to fasten the planks of this ship together with mortise and tenon joints.Ward, Cheryl. "World's Oldest Planked Boats", in Archaeology (Volume 54, Number 3, May/June 2001). Archaeological Institute of America.
Hollow mortising chisel and bit A mortiser or morticer is a specialized woodworking machine used to cut square or rectangular holes in a piece of lumber (timber), such as a mortise in a mortise and tenon joint.
The length of the structures varied from nearly 20 to 27m. These are the world's most ancient planked hulls. The traditions of the hull construction seen in all the excavated vessels continued through the end of the sixth century BC and, with the substitution of nails for mortise-and-tenon joints, into the present. An abandoned freighter, stripped of its internal timbers and left on a small branch of the Nile near Mataria (ancient Heliopolis, north of modern Cairo) provides the first instance of pegged mortise-and-tenon joints in an Egyptian hull.
The only remnant of the original building is in the structural system, where later renovations replaced some, but not most, of the original mortise and tenon framing with balloon framing more common at the time the renovations were likely done.
The vertical supporting posts have been installed inside the walls. The boards fixed on the crosspiece by fishtail tenon have 57 cm forged hinges. The door dimensions are 96 x 170 cm. The door is made from four wide boards.
Yellow poplar wood was used in its mortise-and-tenon frame construction, in its weatherboard siding, and in its wide plank floors. At its NRHP listing in 1980 it was on a property; it was once the center of a plantation.
The third level consists of a poplar timber frame notched with mortise and tenon. This most notable feature of this level is its cantilever, or outward extension over the second story.Steve Rogers, Swaggerty Blockhouse. Tennessee Encyclopedia of History and Culture, 2002.
The Reuleaux triangle rotating inside a constant sized square Traditionally, a mortise would be cut by hand, using a chisel and mallet. However, due to the precision of fit required for a mortise and tenon joint, this can be a difficult and time-consuming task. Other tools such as a router could be used for the task, but the router usually requires special attachments, jigs or templates and the router bit leaves rounded corners that might need to be squared by hand with a chisel. Alternatively, the tenon can be rounded with a rasp to achieve an equally strong joint.
A joist hanger. Joists may join to their supporting beams in many ways: joists resting on top of the supporting beams are said to be "lodged"; dropped in using a butt cog joint (a type of lap joint), half-dovetail butt cog, or a half- dovetail lap joint. Joists may also be tenoned in during the raising with a soffit tenon or a tusk tenon (possibly with a housing). Joists can also be joined by being slipped into mortises after the beams are in place such as a chase mortise (pulley mortise), L-mortise, or "short joist".
The former national managing partner, Tony Stockdale, and other senior staff at RSM Bentley Jennison joined the PLC Board as Executive Directors.Tenon and RSM Bentley Jennison announce merger , RSM Tenon press release RSM branding replaced Tenon's. The firm announced some rationalisation of offices, but planned to expand in Birmingham, Bristol and Leeds. In February 2010, the Financial Services Authority imposed a £700,000 fine for mis selling of structured finance products by Tenon.FSA fines RSM Tenon for structured products' flaws, Financial Times, 25 February 2010 RSM Tenon's shares moved up from the AIM to the main United Kingdom London Stock Exchange in May 2010.
In 1888 the tower was added, with a frame of vertical posts and cross-timbers connected by mortise and tenon. Like the main church body, it is sheathed in weatherboard. In the tower hangs an 1883 bell and on top stands a cross.
A two-story stuccoed ell was added to the house around 1900. Also on the property is a contributing frame bank barn with heavy mortise-and-tenon construction. and Accompanying photo It was listed on the National Register of Historic Places in 1982.
Tusk tenon joints to the framing of the windows and doors. The main room has a coved ceiling lined with tongue-and-groove boarding with coved corner mouldings and cornice and exposed timber truss bases. There are winding mechanisms for the tilting fanlights.
With . The original part of the house is supported by mortise-and- tenon-connected hand hewn square beams, and is insulated with raw cotton. The interior was renovated in Victorian style in about 1887. The eight fireplaces and mantels vary in style.
Lañchenn : Lañchenn means reed inBreton language. See Te(a)od. Lapping : The process of winding hemp (a stout thread) onto a tenon or tuning slide in order to create a good seal between the two parts. Leumluath : (i) A (relatively unusual) piobaireachd variation.
The hand saw is a bit like a tenon saw, but with one flat, sharp edge. Handsaws have been around for thousands of years. Egyptian hieroglyphics exist depicting ancient woodworkers sawing boards into pieces. Ancient bow saws have been found in Japan.
Hand boring machine (Carpentry and Joinery Magazine, 1925) A carpenters boring machine is a hand-driven machine to bore holes in beams such in the process of making a mortise or making holes for the wooden pegs which hold mortise and tenon joints together.
Both the north and south facades are identical. The interior design of the house is a central hall plan. The original woodwork, including a pegged mortice-and-tenon-joined staircase handrail, is intact. The house and property remained in the Stewart family until 1942.
Three Cooks was the name given to a trio of high street bakers formerly trading as Clarks Bakery, Stephen's Bakery and Wimbush the Bakers. Based in Solihull, it was taken over by Rank Hovis McDougall and expanded into a 255 retail bakery, and then sandwich chain business. In 2000, as high street trends changed, it sold the freeholds of the various retail premises. Due to financial difficulties arising from a downturn in high street trading conditions, in November 2006 the chain went into administration with a footprint of 158 shops, under the legal control of Tenon Group Tenon immediately closed 37 loss-making sites, with around 250 job losses.
The Earick House was built by timber framing, where heavy timber are jointed together with pegged mortise and tenon joints. The structure was originally built in the Federal architectural style. Once Squire Earick took possession of the home, he renovated with many characteristics of Steamboat Gothic style.
There are various types of log furniture, from the sleek finished look to the rustic ‘craggy’ look. Building log furniture is time-consuming, and since most pieces are custom built, it can often be quite expensive. The mortise and tenon method is favored for its strength.
The destroyed mill had two structures. In 1884, Joseph Chipman had built a one- story mill over the millrace (which survives), which contained turbines and millstones. The wooden superstructure featured mortise and tenon joinery. An adjoining two story section was moved to the site from elsewhere.
The main part of the building is three and a half stories that measures by . It is attached to a two-story addition that measures by . The building was built of native oak beams. It utilizes mortise and tenon joints that are connected with wooden pegs.
It includes by cypress corner posts and top plates, with other timbers of by size. Timbers are joined by mortise and tenon joints. Timbers on its front facade are exposed. The house was modified in 1899 by addition of a framed lean-to along its rear facade.
The periscleral lymph space or episcleral space of the eye is the space between the outer surface of the sclera and the inner surface of the capsule of Tenon. It is continuous with the subdural and subarachnoid spaces, and is traversed by fine bands of connective tissue.
Other organs such as the stomach work chemically to digest food. ;Chapter VIII. Of Mechanical Arrangement in the human Frame :The bones and joints form a mechanical structure with features comparable to hinges, mortice and tenon and ball and socket joints, etc., to provide both support and suitable flexibility.
Design of the bridge was contracted to Ralph Whitehead Associates, Inc. of Charlotte, North Carolina Construction was awarded to Jones brothers, Inc. (JB), from MT. Juliet, Tenon. The Coast Guard provided about $21 million of the total $30 million bridge cost, with the rest paid by the State.
The chest, long, wide and high, was made of oak with iron hinges and lock. It was intact despite the rough encounter with the plow. It was rectangular with a slightly curved lid and flat bottom. The bottom was joined to the ends via a mortise and through tenon.
The horizontal timbers are tenoned into mortises chiseled into the posts. At each mortise and tenon is a chiseled-in guide symbol, consisting of a Roman numeral or other directional mark. Each corner has two interior diagonal braces. The four corner posts are tenoned into interlocking sill logs.
Joinery on twigs and branches is similar to joinery for lumber. Mortise and tenon joints are strong, but also labor-intensive and time-consuming. Twigs and branches can also be fastened with nails. Where one branch meets another, the ends must be coped, or cut to match the curve.
Utley-Council House is a historic home located near Apex, Wake County, North Carolina. It was built about 1820, and is an asymmetrical, two-story, three bay, frame Federal period dwelling. It has a hall-and-parlor plan. Also on the property is a contributing mortise-and-tenon smokehouse (c. 1820s).
Anecdotal evidence places its construction in the early 1760s. The mill has a log frame and uses mortice and tenon construction. The main beams of the mill, of which there are six, are huge timber beams. These beams are one piece, each of which are long and over one foot square.
Lifesize replica at the Bodrum Museum of Underwater Archaeology. The distribution of the wreckage and the scattered cargo indicates that the ship was between long. It was constructed by the shell-first method, with mortise-and-tenon joints similar to those of the Graeco-Roman ships of later centuries.Pulak, 1998 p. 210.
This is why holes were drilled slightly off-centre, allowing the peg to naturally pull the posts together with gravity."Early Wooden Truss Connections vs. Wood Shrinkage: From Mortise-and-Tenon Joints to Bolted Connections" APT Bulletin, Vol. 27, No. 1/2, A Tribute to Lee H. Nelson (1996), pp. 11-23.
Traditionally, rather than nails, mortis and tenon joints and wooden pegs are used. Natural materials – timber, bamboo, thatch and fibre – make up rumah adat.Dawson (1994), p. 12 The traditional house of Nias has post, beam and lintel construction with flexible nail-less joints, and non-load bearing walls are typical of rumah adat.
The original selling price in Japanese yen is often included in the model number—for example TLS-100 = 100,000 Japanese yen. The higher priced Tokai Gibson replicas have nitrocellulose finishes and long tenon neck joints. Tokai guitars have been made in Japan, Korea and China. Korean production started around the mid-1990s.
Originally, the AJF series (aka: "Jazz King") used the "Chief-style" bolt-on neck construction, but Tacoma changed to a more traditional glued mortise and tenon neck joint. AJF's had a conventional ebony bridge with a composite tailpiece and pickguard/finger rest. EMG, Inc. designed a passive humbucking pickup for the AJF's.
Windows were multi-pane, twelve over eight, and the originals survive in the upstairs of the central section. The framework is hewed oak and walnut beams, connected with mortise and tenon. Inside downstairs is a central staircase with two rooms on either side. The oldest walls are plaster over oak split-lath.
Richard Taylor's half-brother, the Archibald Taylor Plantation House. Also on the property are the contributing early mortise and tenon smokehouse, a pigeon house or tobacco packhouse, an air-cure tobacco barn, a frame corn crib, and two log tobacco barns. It was listed on the National Register of Historic Places in 1988.
Georges Hayem. Georges Hayem (25 November 1841 – 28 August 1933) was a physician and hematologist born in Paris. He studied medicine in Paris, and later became a professor of therapy and materia medica. Beginning in 1878 he practiced medicine at the Hôpital Tenon; later on, he was associated with the Hôpital St. Antoine.
A wood scribe is a tool for marking wood by scratching the surface visibly. A wood scribe is often used with a try square for accurate scribing. A marking gauge is a more specific form of wood scribe used to accurately mark wood for cutting, often for laying out mortise and tenon joints.
Leospo, Enrichetta (2001), "Woodworking in Ancient Egypt", The Art of Woodworking, Turin: Museo Egizio, p. 20 Commonly used woodworking tools included axes, adzes, chisels, pull saws, and bow drills. Mortise and tenon joints are attested from the earliest Predynastic period. These joints were strengthened using pegs, dowels and leather or cord lashings.
This hull design is characterized by a reverse stempost with a cutwater, enabling the vessel to compensate for its large, non-specialized, powerful square sails and giving it speed. A schematic of the mortise and tenon technique for shipbuilding that dominated the Mediterranean until the 7th century BC. The vessel contained framing composed of various elements (keel, fore foot, stempost, cutwater, sternpost, inner post, false post), double planking (assembled entirely by mortise-and-tenon joints pegged from the inside) and was covered with a sheet of lead. What is referred to as a large keelson is actually a 7.5m long mast-step timber made of oak which doubles the axial frame. The stringers, nailed onto the frames, reinforced the hull longitudinally.
80 The construction of cathedrals and castles advanced building technology, leading to the development of large stone buildings. Ancillary structures included new town halls, houses, bridges, and tithe barns.Barber Two Cities p. 68 Shipbuilding improved with the use of the rib and plank method rather than the old Roman system of mortise and tenon.
Mortise and tenon joints were used in the framing. Rafters rest on the roof plate. The slate-shingled roof is pierced by brick chimneys at either end and three shed dormer windows on both east and west elevations. A wraparound porch on the first story has turned posts and is enclosed on the east side.
Built with regulation dimensions, the 1753 House is quite small by modern standards. Using mortise and tenon joints, the walls and frame are made of oak timbers harvested from nearby White Oak woods. The roof uses split shingling. The interior includes a few historical replicas, such as a table, a bench, and fireplace cooking instruments.
The back is supported from behind by three vertical struts running in parallel. The two outer struts were supplemented with gilt wood edging. Armrests and seat frame were strengthened by gilt wood edging too and continued from the armrests up to the back of the chair. Gilt bronze nails supplement the wooden tenon joints.
A1 and A2 Milk. Nelson: Craig Potton Publishing. Pg. 20 McLachlan first became involved in the dairy industry in 1989 when he became the managing director of Tenon Developments. In a joint venture with Morrinsville Thames Cooperative Dairy Company, they developed a method of producing cholesterol-free butter and low-fat meats using extraction technology.
The roof is supported on closely spaced large timber posts. At the sides, the barn is divided into bays providing horse stalls on one side and storage on the other side. Joints are mortice and tenon or pegged. Storage spaces at the north end of the skillions are accessed by double doors across the skillions.
These Roman-period log-boats were constructed for lake fishing, and were about 8 m long, 1.5 m wide, and 80 centimetres deep, were made of oak, yew, and possibly willow. The boats were paddle propelled. Other notable constructional features are that they were complex boats: carved; dugout (extended); mortice-and-tenon; and sewn.
Putnam bought a one-acre building site adjacent to Congress Spring from Judge Walton. The boarding house was finished in 1803. The building was a mortise and tenon clapboard structure that was described as two Federal style houses placed end to end. It had 10 windows across the front, whitewashed exterior, and dark shutters.
The Chimneys' floor plan has two rooms on each side of a central hall. The two- story house is framed with heavy timber with mortise and tenon joints secured with hardwood pegs. Each timber is marked by chiseled Roman numerals. Spaces between wall studs are nogged with brick in the interior and exterior walls.
Wooden uprights were attached to the iron risers that passed through the apex of each of the A-frames and these supported the upper trough carrying the Taff Fawr leat. Reflecting its designer's roots in carpentry, the members composing the trusses are joined by dovetail and mortise and tenon joints commonly used in wooden structures.
The craftsman also creates a small opening, a vent hole that allows steam to escape during the firing. The vent can also be used for assembly, allowing intervention inside the piece. The limbs are then joined to the body either by pasting them with slip, clay mixed with water, or by mortice and tenon joint.
Pierre Bazy Pierre Bazy (28 March 1853 – 22 January 1934) was a French surgeon and urologist born in Sainte-Croix-Volvestre. He studied medicine in Toulouse, afterwards serving as an interne at the Hôpital Lourcine in Paris. He successively worked at the Bicêtre, Hôpital Tenon and Hôpital Saint-Louis. At the Hôpital Beaujon he was appointed director of urology.
Sapp Plantation is a historic plantation located outside of Sardis, Georgia. It was added to the National Register of Historic Places on February 8, 1980, and is located northwest of Sardis on Georgia 24. with Its plantation house was built in the 1820s with mortise-and-tenon construction. It is a two-story building with one-story additions.
MachTen is a Unix-like operating system from Tenon Intersystems. It is based on 4.4BSD and the Mach kernel, and features the X Window System and GNU programming tools. It runs only as a classic Mac OS application program (in a virtual machine) on Apple Macintosh computers. MachTen development started in 1989, culminating in the first release in 1991.
Boggs Mill is a historic grist mill located near Seneca Rocks, Pendleton County, West Virginia. It was built about 1830, and is a 3 1/2-story, rectangular, gable front building. It has clapboard siding and was constructed using mortise and tenon, braced frame construction. It sits on a stone foundation and has a standing-seam metal roof.
Its weight is . The slope of the walls of the pyramidion is 17°24' from the vertical. There are twelve ribs, three per wall, which spring from the level, all being integrated into the walls up to the level. All are free standing above 500 feet, relying on mortise and tenon joints to attach neighboring stones.
The early part of the house is distinguished by wide elaborately moulded skirting boards. French doors (some painted, some varnished) open out onto the verandahs and sash windows have narrow glazing mullions. The extension is of post and rail construction lined with vertical timber boards. Mortice and tenon joints are visible in the window and door framing.
The House at 42 Hopkins Street in Wakefield, Massachusetts is an excellent early example of an Italianate house. Built c. 1850, the -story wood-frame structure is an early example of balloon framing (replacing the earlier mortise and tenon style). It is three bays wide, with wide eaves and double brackets, corner pilasters, and a high granite foundation.
Posterior sub-Tenon's Steroid Injections for the Treatment of Posterior Ocular Inflammation: Indications, Efficacy and Side Effects This route is also reported to be used to administer triamcinolone acetonide (a corticosteroid) in the treatment of macular telangiectasia type 1. Also, it is used in the ocular anesthesia (e.g. peribulbar and retrobulbar anaesthesia).Sub-Tenon anaesthesia, Eye Wiki.
They are similar to mortise and tenon joints, and have been used traditionally in historic buildings, such as Shinto shrines and Buddhist temples, and also in modern domestic houses. The basic principle involves penetrating one element through another (i.e., embedment); in Japan and other Asian countries this method is used to connect wooden posts and beams.
This was very early, before Wisconsin was a state. This area was still part of Michigan Territory. Most structures built in the lead-mining region at the time were simple and functional. Parkinson instead built a two-story I-house - a style he knew from Tennessee - with walls of hand-hewn oak joined by mortise and tenon.
It is similar in design to the cross at Nevern. It is inscribed, on the west face "MARGIT EUT REX ETG [uin] FILIUS" and otherwise decorated in abstract patterns. The cross is tall and is in two parts, joined by a tenon joint. The top is Carmarthenshire sandstone and the lower portion is igneous-type stone from Preseli.
When the building was finished, there was a basement, two floors and an attic. The building was built using the Red River construction method (also called mortise and tenon or tongue and groove). The building uses no nails to hold it together. In November 1959 the municipality designated a museum for the site and established a board of directors.
Generally, the building retains early and original door and window hardware. The second floor of the William Street wing is notable for its exposed roof structure comprising multiple sets of Queens post trusses with unusual tusk tenon detailing and rafters. Members are stop-chamfered. The ceiling comprises beaded boarding laid diagonally and is raked to follow the mansard roof.
RSM Bentley Jennison won the award for Large Firm of the Year, in the Accountancy Age Awards for Excellence 2006.Bentley Jennison article on Accountancy Age website RSM Tenon won National Firm of the Year, at the British Accountancy Awards 2011.British Accountancy Awards 2011: The winners, Accountancy Age, 30 November 2011. Retrieved 14 December 2011.
The Manthey Barn, in rural Tripp County, South Dakota near Colome, South Dakota, was built in 1916 by George Manthey. It was listed on the National Register of Historic Places in 2004. It is a "Midwest Three-Portal" dairy barn. It has a timber frame built with hand-hewn lumber and uses mortise-and- tenon joinery.
The early VH-1 pickups have metal braided shielded wire; the later versions have plastic covered wire. The higher end Burny guitars have fret edge binding and most models were finished with a thin polyurethane finish with only a few high end models having nitrocellulose lacquer finishes. The FLG-240, FLG-150, FLG-90 Les Paul models and the FSA-80 Semi Acoustic model were made by Terada from 1980 to 1981. The RLG-150, RLG-120, and RLG-90 models were made by Matsumoku from 1982 to 1986. Some Burny guitars from the 1970s and 1980s had a tenon-and-dowel neck joint similar to what was used on some Greco guitars. Some Burny guitars from the 1980s had a Matsumoku bolt tenon that was also used on many Matsumoku-made Aria guitars.
In traditional timber frame joinery, mortises and tenons were typically wide and from the edge of the timber when working with softwoods, giving rise to the width of the blade. Likewise, mortises and tenons were traditionally wide when working in hardwoods, explaining the width of the tongue. This allowed for quick layouts of mortise and tenon joints when working both hard and softwoods.
The concrete blocks used for the foundation and for the adjacent silo, which a part of this historic nomination, were locally produced in a Danish-influenced industry. The two story heavy timber structure utilized mortise and tenon construction for the animal stalls and the supports for the hay loft. The barn was listed on the National Register of Historic Places in 1991.
All but one of the original buildings remain intact. The buildings include the farmhouse, a timber-framed mortise and tenon barn with an attached milk house, and a two- story saltbox style granary. The bricks for the farmhouse were believed to have been manufactured in nearby Dayton, Minnesota. The farm had no electricity until 1948; before that, they had kerosene lighting.
Obediah Farrar House is a historic home located near Haywood, Lee County, North Carolina. It was built in the 1850s, and is a two-story, three bay, mortise-and-tenon frame I-house with Greek Revival style design elements. Also on the property is the contributing road segment and landscape. It was listed on the National Register of Historic Places in 1993.
Kernersville Depot is a historic train station located at Kernersville, Forsyth County, North Carolina. It was built by the Northwestern North Carolina Railroad in 1873. It is a plain one-story, mortise-and-tenon gable roofed building sheathed in board-and-batten siding in the Late Victorian style. It served as a depot until a new station was built in 1901.
Rippleton Schoolhouse is a historic one-room school building located at Cazenovia in Madison County, New York. It was built in 1814 and remodelled in 1884. It consists of two gabled units and is built of a heavy timber mortise and tenon framework. It was moved to its present site on the grounds of the Lorenzo State Historic Site in 1997.
George Diehl Homestead is a historic home located at Cherryhill Township, Indiana County, Pennsylvania. It was built about 1840, and is a 2 1/2-story, rectangular hewn log building with a gable roof. It measures 18 feet, 6 inches, wide and 28 feet, 4 inches, long. It features mortise and tenon jointing, also known as corner-post construction, for the log structure.
Day-Vandevander Mill — also known as the Old Mill at Harman — is a historic grist mill located near Harman, Randolph County, West Virginia. The original structure was built about 1877, and is a mortice and tenon, hand hewn post and beam structure. The additions built in the 1920s are studded wall frame construction. The property includes the original mill pond and tail race.
The saxophone mouthpiece is outwardly similar to that of the clarinet but has no tenon. Instead, the saxophone's neck has a ring of cork glued to it, and the mouthpiece fits firmly onto the neck cork. Saxophone mouthpieces are available in hundreds of styles from dozens of manufacturers around the world. Mouthpieces are often named after famous performers who contribute to their designs.
In August 2013, the shares of RSM Tenon Group PLC were suspended, and the company went into insolvent administration. The trading subsidiaries were immediately purchased by Baker Tilly UK Holdings through a limited liability partnership. Baker Tilly LLP, in October 2015, re branded itself as RSM UK. RSM UK is a provider of audit, tax and consulting services to middle market leaders, globally.
Elements rarely present on shallower shipwreck sites are beautifully preserved 200m below the surface. Disappointingly for ship scholars and historians of technology, there are few indications of how the planks of Sinop D are held together. There are no mortise and tenon fastenings, and no sewing. Shipwreck D may be one of the earliest lateen-rigged ships to be studied by archaeologists.
The house is raised of the ground and uses nails to fix the slabs which have been roughly thinned out to receive the "Ewbank" nails. The construction shows a reasonable understanding of carpentry techniques and uses mortise and tenon joints. Accommodation seems above normal for convict/ lessee/ or shepherd. More likely built for a supervisor or farm caretaker for owners.
Tenon Limited was a New Zealand-based publicly traded company producing timber products. It was formerly known as Fletcher Forests which was split from the Fletcher Challenge group in 2001. The company's main business comprises supplying millwork building materials to the professional trade and DIY homeowners. Rubicon Forests Limited were the major shareholder, controlling a majority 57.37% as at early 2008.
There due to the fame of his father, they were received with open arms by the various learned societies such as the French Academy of Sciences and consorted with Louis, Antoine Portal, Jacques-René Tenon, Julien-David Le Roy, the Count Jean-Charles de Borda, the Marquis de Condorcet, and Benjamin Franklin (the American liberator). He became member of the Royal Institute of the Netherlands in 1808.
The other remarkable item was the torc or collar which is in diameter with buffer terminals, using a mortice and tenon fastening. The hollow tube that made up the ring is in diameter. The hinge is no longer there but it would have been required to put on the collar. The fastening consists of a "T" piece which fits into a slot as the torc is closed.
The 13th century Norman castle is west of the village. Carew Cross is at the roadside in the village, and is an important example of an 11th-century memorial Celtic cross, commemorating King Maredudd ab Edwin of Deheubarth (died 1035). The cross, tall, is made from the local limestone. Similar to the Nevern cross, it consists of two parts, connected with a tenon joint.
The large beam with a tenon protruding through the post is called an anchor beam. This image is of a barn in the Netherlands, but anchor beams in North America are very similar. (Nutter - 20170459 - RCE) The exterior features a broad gable roof, which, in early Dutch barns extended very low to the ground. The barns feature center doors for wagons on the narrow end.
Hanger Mill, also known as Huff Mill, is a historic grist mill located at Churchville, Augusta County, Virginia. It was built about 1860, and is a 2 1/2-story, limestone and heavy mortise-and-tenon frame building with a metal gable roof and weatherboard siding. It has an attached one-story office structure. The mill operated until 1940, and retains most of its milling machinery.
Upstairs, the second floor has five rooms and two bathrooms with Federal detailing, including doors similar to the main entrance hall. In the attic are original hewn roof timber framing and rough sheathing. The rafters rise from end plates to a purlin where the roof pitch changes. Rising from the center beam is a vertical member joined to the horizontal collar by mortise and tenon.
Locust Level is a historic home and farm located at Montvale, Bedford County, Virginia. It was built about 1824, and is a two-story, brick, central-passage- plan I-house with fine exterior and interior Federal-style detailing. It has a standing seam metal roof. Attached to the rear is a two-story mortise-and- tenon frame wing known variously as the Hall or the Dance Hall.
Unlike western architecture, in ancient Chinese wooden architecture, the wall only defined an enclosure, and did not form a load-bearing element. Buildings in China have been supported by wooden frames for as long as seven millennia. The emergence of the characteristic articulated wooden Chinese frame emerged during the Neolithic period. Seven thousand years ago mortise and tenon joinery was used to build wood-framed houses.
Parts of a face frame Face frames are composed of a set of intersecting frame members that are joined to one another using one of a selection of woodworking joints. The most common joints used are the butt joint or mortise and tenon. The frames consist of vertical stiles and horizontal rails. Individual compartments within the cabinet are divided by mid-stiles and mid-rails.
The cross-pieces (stretchers in the western equivalent) are joined through mortise-and-tenon joinery as well. The legs and stretchers are commonly round rather than square or curvilinear. The simplest pieces are simply four splayed legs attached to a solid top, but more complicated pieces contain decorative brackets, drawers and metal latches. Cabinets in this style typically have an overhanging top similar to western-style cabinetry.
This often prevented them from fitting comfortably into armchairs with rectangular seats. A caquetoire seat is splayed so women in their large skirts could easily sit. These chairs were often made from walnut rather than oak allowing the frames to be more elaborately carved. They were built with mortise and tenon joinery, so no nails were exposed and no glue had to be used.
Exterior walls were joined with large spikes, while the interior walls were joined to the exterior ones with mortise and tenon joints. When the house was built it received immediate notice in architectural and popular circles. It was owned for a time by Arkansas politician J. William Fulbright. The house (along with about of surrounding land) was listed on the National Register of Historic Places in 1986.
It was designed in the Federal architecture style. It is topped with a hip roof and has a one-story frame wing at the rear which was built at the same time as the house. The barn, also contemporaneous to the house, measures and rises two stories. It has a mortise and tenon timber frame sheathed in vertical boards and covered in shiplap siding.
With the official opening of the City Square Plaza (adjacent to Victoria Park’s north side) in 2012, the arts’ and vendor markets had room to expand. The 2018 festival had 18 food vendors — including Afghan Cuisine, Bon Burger, Michael’s Coffee Shop & Bakery, Selam Ethiopian Restaurant, and Malinche — and more than 29 arts vendors— including Mortise and Tenon, Kat Cadegan Jewellery, and Naked Kitty Naturals.
Built circa 1850 to the north of the farmhouse, the machinery shed once housed a cider press. It is a two-story structure that has been modified by the addition of two wings, built in 1938 primarily for the purposes of sheltering farm implements. The walls are now covered with aluminum siding, but the building is still supported by the mortise and tenon joints of the original oak frame.
The barges were similar to boxes without lids, and were constructed using mortise and tenon joints, the same technique used in ancient boats, to ensure they remained watertight. The barges were ballasted with 0.5 meters of pozzolana concrete and floated out to their position. With alternating layers, pozzolana-based and lime-based concretes were hand-placed inside the barge to sink it and fill it up to the surface.
A small wood hatch leads to the attic, where the sawn rafters of the roof have skip sheathing and no ridge pole. From the first floor, the same stairs lead down to the basement. It has a concrete floor and single pane windows on the north and south. A mortise and tenon frame surrounds a board-and-batten door to the stone steps that lead to the outside bulkhead entrance.
Pieces were assembled using mortise-and-tenon joinery, held together with lashings, pegs, metal nails, and glue. Wood was shaped by carving, steam treatment, and the lathe, and furniture is known to have been decorated with ivory, tortoise shell, glass, gold or other precious materials.Richter, 125. Similarly, furniture could be veneered with expensive types of wood in order to make the object appear more costly,Richter, 125-126.
He did pioneering work in lens implants beginning in 1976 and the Fugo technique "plasma scalpel" for glaucoma and cataract surgeries. He was an innovator with Trans-ciliary Filtration (invented in 2001) and the Pre-Tenon Tangential Micro Track Filtration. He was the discoverer of lymphatics in the eye. He wrote over a dozen books on ophthalmology, and also a non-technical book Naroi Akh (Healthy Eye) in Punjabi decades ago.
Elements rarely present on shallower shipwreck sites are beautifully preserved 200 m below the surface. There are currently few indications of how the planks of Sinop D are held together, as the bulk of the ship remains buried in sediments. There are no mortise and tenon fastenings, and no sewing. Sinop D was originally thought to be one of the earliest lateen-rigged ships available to be studied by archaeologists.
This flower-inspired stern detail would later be widely used by both Greek and Roman ships. They had possibly developed a primitive type of keel, but still retained the large cables intended to prevent hogging. A schematic view of the mortise and tenon technique for shipbuilding that dominated the Mediterranean until the 7th century AD.Unger (1980), pp. 41–42 The design of the earliest oared vessels is mostly unknown and highly conjectural.
The Dowelmax Jig with distance gauge bar The Dowelmax is a loose tenon dowelling jig manufactured by the O.M.S. Tool company in Canada. The manufacturer claims that the small manufacturing tolerances of for the aluminium, brass and steel components of the jig ensure accuracy and repeatability. The precision manufacturing adds to the unit's cost, which is higher than other dowelling jigs. The tool allows the placement of five dowels in one pass.
Tests by both the manufacturer, and Wood magazine, are claimed to show that dowel joints made with the Dowelmax are stronger than most other woodworking joints tested. In 2007, Wood magazine compared the joint strength of various loose tenon methods and tools, with these results: A 2011 review by Wood Magazine, has rated Dowelmax very highly as a dowel joinery tool. The review classifies Dowelmax as "the best dowelling jig ever made".
A mortise gauge is a woodworking tool used by a carpenter or joiner to scribe mortise and tenon joints on wood prior to cutting. Mortise gauges are commonly made of hardwood with brass fittings. Like the simpler marking gauge, a mortise gauge has a locking thumb screw slide for adjusting the distance of the scribe from the edge of the wood. It has two protruding pins, often called "spurs",The Mortise Gauge.
Biscuits are predominantly used in joining sheet goods such as plywood, particle board and medium-density fibreboard. They are sometimes used with solid wood, replacing mortise and tenon joints as they are easier to make and almost as strong. They are also used to align pieces of wood when joined edge-to-edge in making wider panels. It is important to use the same face when cutting the slots, so the boards are perfectly flush.
A sawbuck table or X-frame table is a type of trestle table having X-shaped supports at either end. It takes its name from the similarity of these X-shaped supports to sawbucks. In addition to the supports, a sawbuck table is distinguished by a sturdy central rail and key-tenon joints holding the supports and central rail together. Historically, sawbuck tables also often featured footrests running the length of the table.
Steel & Tube was listed on the New Zealand Stock Exchange in 1967. In 1980 Tenon subsidiary Fletcher Metals became the largest shareholder by purchasing 24.92% of the company from British Steel Corporation. In 1985 Tubemakers of Australia became a minor shareholder with an 8.8% share in Steel & Tube. In 1999 Fletcher Challenge, through their subsidiary; Fletcher Steel, were granted an application with the Commerce Commission to acquire up to 100% of Steel & Tube Holding.
The neutrons entered the assembly by a small hole through the ≈28 cm thick U blast-heat shield. It was positioned in front of the secondary assembly facing the primary. Similar to the tamper-fusion capsule assembly, the shield was shaped as a circular frustum, with its small diameter facing the primary's side, and with its large diameter locked by a type of mortise and tenon joint to the rest of the secondary assembly.
The post to the southwest corner of the house has the mortice and tenon joints that were part of the earlier 1878 verandah structure. The internal partitions are post and rail framed and lined with vertical beaded tongue and groove boards. The ceilings are lined with beaded tongue and groove boards. French doors open onto the verandahs from the southwest and north bedrooms and from the lounge and dining rooms to the north.
A one-story, shed roofed porch runs across the whole façade. The house has beaded weatherboard siding and a tall gable roof with a metal roof. The hewn timbers, pegged mortise-and-tenon joints, Carpenter brand locks, and sash sawn timbers reflect the state of construction practices in the region at the time. The details of the woodwork, especially the reeded pilasters and sunburst motifs on the mantelpieces, reflect the Federal style.
The trials with Chesma greatly affected the armour protection design of the Borodino-class ships. The Krupp cemented-armour plates were resized to match the frames and provide support for their joints; they were also locked together with mortise-and- tenon joints to better distribute the shock of a shell's impact. The waterline belt covered the middle of the ship. It had a total height of , of which was above the design waterline and below.
The pews are supported by three arched supports joined to the seat by a mortise and tenon joint and reinforced with nails. The newer pews exhibit identical design elements but are constructed with modern nails and timber. Though most of the pews are arranged against the church's west elevation with a center aisle, two are along the north elevation and four are along the south elevation. The pulpit is situated at the east elevation.
Tawana began construction of her Ark on August 8, 1982, using wood salvaged from abandoned buildings, connected with mortise and tenon joints. The ship's frame was 86 feet long, 20 feet wide, and 28 feet high. As she intended it to be both sculpture and a seaworthy vessel, she reinforced the Ark's bulkhead with iron and built five waterproof compartments. She intended to christen the Ark as the AKE Matsu Kaisha (Red Pine).
Disappointingly for ship scholars and historians of technology, there are few indications of how the planks of Sinop D are held together. There are no mortise and tenon fastenings, and no sewing. Shipwreck D may be one of the earliest lateen-rigged ships to be studied by archaeologists. The angle of the mast and the lack of fittings on it suggest that a lateen sail is the most likely configuration for such a small vessel.
After every trip the triremes were pulled ashore in special slides and the hypozomata was re-tightened. The trireme hulls were constructed from planks with closely spaced and pegged mortise and tenon joints. When these are fitted carefully the hull can carry shear stresses well and stay watertight. It was estimated that her ramming speed should have been in excess of , something the present reconstruction could not achieve, possibly because it was overweight.
Most early saltboxes, as with many other types of New England colonial houses, are timber-frame. Timber framing, or post-and- beam construction, involves joining large pieces of wood with woodworking joints, such as mortise-and-tenon joints, or with wooden pegs, braces, or trusses. Metal nails were sparingly used, as they were an expensive commodity at the time. The exterior of a saltbox was often finished with clapboard or other wooden siding.
Both bays end in small, gabled dependencies. The east (front) facade is five bays wide, asymmetrical but with a centrally located front entrance. The windows are in heavy mortise and tenon frames. In the front wall near the north end is a large embedded stone tablet explaining that the house "suffered no injury" when British troops burned Kingston on October 16, 1777, and that it was home to the van Steenburgh family for two centuries.
The vertical posts were long enough to extend about four feet above the ceiling joists. A top rail across the front (north side) of room 2 and the foyer and another across the rear (south side) of room 2 and the foyer tied the vertical beams all together. Each vertical post had a hand-made mortise at interior ceiling height to receive each ceiling joist, which had a tenon at each end.
The Hancock Warehouse is located south of Lindsay Road on the north bank of the York River, a short way east of the Sewall Bridge, which carries Seabury Road across the river. It is a rectangular 2-1/2 story wood frame structure measuring about , and is about tall. It has a gable roof and is finished in shingle siding. The interior is rough-hewn timber construction joined by mortise and tenon joints with wooden peg fasteners.
In February 1933, the 17-year-old Piaf gave birth to her daughter, Marcelle (nicknamed Cécelle) at the Hôpital Tenon. Like her mother, Piaf found it difficult to care for the child and had little parenting knowledge. She rapidly returned to street singing, until the summer of 1933, when she started performing at Juan-les- Pins, Rue Pigalle. Following an intense quarrel over her behavior, Piaf left Louis Dupont (Marcelle's father) taking Mômone and Marcelle with her.
Narrow staircases provide access between the floors. The attic has smaller windows on either gable, and a layer of concrete poured over the plank flooring as a form of fireproofing. The house is built in the Quereinhaus style that had become popular in rural Luxembourg in the 1840s. The style includes design features in use since medieval times, such as the mortise and tenon timber framing, massive stone walls, stucco façade, square windows, and half-hip roof.
Greenlee Textron is an industrial and electrical tool company headquartered in Rockford, Illinois. It was founded in 1862 by brothers Robert and Ralph Greenlee to manufacture their invention, a drill surrounded by four chisel blades, used in making the pockets for a mortise and tenon joint for the furniture industry in Rockford. This device is still used in cabinetmaking. The brothers later diversified into a variety of hand woodworking tools as well as machinery for making wooden barrels.
The house in 2008 Seven Chimneys is one of a dozen or so remaining examples of the original Dutch settler style located throughout the Hudson Valley region of New Jersey and lower New York state. The foundation of Seven Chimneys is built of rough stone and lime mortar. The handcut beam frame of the original house is constructed without nails, utilizing pegged mortise and tenon joints. The exterior is constructed of hand-chiseled Hudson River sandstone.
The ship was constructed around a long keel of thickness, which is believed to have survived intact. The front of the ship had a 61° angle of rake at the bow where the stem post was joined to the keel with mortise and tenon joints and secured with diameter rope. The hull planks were stitched onto the frames and keel through holes spaced at intervals. The boat had a keelson for added strength, which rested on the half-frames.
515 because of its being neither required nor in vogue. alt=A sketch of the exterior of the side of a large building atop a hill with a tree in the foreground. The house is built with stone foundations, and the main structure is made of oak timbers, joined together using mortice and tenon joints, and held in place with oak pegs. Wattle and daub or lath and plaster are used to fill the spaces between the timbers.
The structure of the building consists of mortise-and-tenon timber frame construction, with studs spaced roughly every twenty four inches. Floor joists are made of logs that have been worked flat on the top face. The wall finish on the interior consists of butt-joined horizontal boards that have been limewashed. Evidence in the wall and roof structure suggests that the interior space was once divided into two rooms, with a central chimney serving both spaces.
This includes tenon and mortar joints, typical timber and steel truss roof and typical single span and collar beam roof construction. The place possesses uncommon, rare or endangered aspects of the cultural or natural history of New South Wales. The Laurieton School of Arts building is a rare example of a sophisticated School of Arts building in New South Wales. Its intact timber lined interiors are a rare example of the culmination of this traditional style and construction.
There is a Chinese idiom "方枘圆凿", or "方凿圆枘", (literally and respectively "square tenon and round mortise" and "square mortise and round tenon") that was originally derived from a line in the Verses of Chu (Chu ci) 楚辭), composed in the Warring States period (ended 221 BC), in which the poet Song Yu writes: "圆凿而方枘兮，吾固知其龃龉而难入。" The Han Dynasty historian Sima Qian and Tang Dynasty historian 司馬貞 used the same expression in their historical writings too.司馬遷．史記．卷七十四．孟子荀卿傳：「持方枘欲內圜鑿，其能入乎？」司馬貞．索隱：「謂戰國之時，仲尼、孟軻以仁義干世主，猶方枘圜鑿然。」 It is still widely used today to mean two things that don't fit together due to different qualities, characters or abilities.
The first European settlers arrived in the vicinity of Antioch in the last quarter of the 18th century. Samuel Barker Davis and his family were among the first to settle permanently in the village of Antioch, moving from Winchester Virginia in 1787. Davis, a veteran of the American Revolutionary War, established a gristmill and built a log residence, both of which are still standing in Antioch today. The mill is a four-story wooden structure of mortise and tenon construction.
The barn, like the machine shed, was constructed in the English barn style. It was also built in the mortise and tenon fashion, with pegged joinery and hand-hewn timber. Both center bays acted as hubs for grain harvesting, with the north acting as a drive-through for wagons and the south containing a threshing floor. The end bays have two levels, with the bottom level containing stalls for cattle and oxen and the top level acting as a hay loft.
The elevated buildings had an entrance ladder carved from a single log of wood. These buildings were apparently built of planks, using a mortise and tenon joinery method, which indicates that the builders had use of iron tools. Approximately 30 rice paddies were uncovered, along with of associated narrow canals and waterways. The site is now preserved as a public archaeological park with reconstructed buildings and rice fields, and is protected by the Japanese government as a National Historic Monument.
Variations on the communal longhouse principle are found among the Dayak people of Borneo, as well as the Mentawai people. A fishing village of pile houses in the Riau archipelago The norm is for a post, beam and lintel structural system that take load straight to the ground with either wooden or bamboo walls that are non-load bearing. Traditionally, rather than nails, mortis and tenon joints and wooden pegs are used. Natural materials - timber, bamboo, thatch and fibre - make up rumah adat.
Paul Bar (1932) Paul Bar (5 November 1853, in Paris - 26 November 1945, in Paris) was a French obstetrician. From 1876 he worked as a hospital interne in Paris, and served as an assistant to Étienne Stéphane Tarnier at the Maternité. In 1887 he obtained his agrégation for obstetrics at the faculty of medicine, and successively worked at the hospitals Tenon, Saint-Louis and Saint-Antoine. In 1907 he succeeded Pierre-Constant Budin as professor of obstetrics to the medical faculty.
This long stem pipe type has its origins in the Ottoman Empire, geographically and historically. Churchwarden pipes generally produce a cooler smoke due to the distance smoke must travel from the bowl to the mouthpiece. They have the added benefit of keeping the user's face further away from the heat and smoke produced by combustion in the bowl. They are also more prone to breakage since more pressure is placed on the tenon when the pipe is supported around the mouthpiece.
The house is a rectangular, two-story, five bay, Federal style structure with a single story rear addition. Large, axe-hewn beams were used for construction, and are joined at the corners by mortise and tenon joints and locked with wooden pegs. The facade has turned-back cornice moldings, a semi- circular windows at the gable end, and a center entrance with a fan-light window above the door. The windows are regularly spaced in the facade and contain small panes.
Verougstraete (2015), 247 The frame comprises a main frame nailed and screwed at the side to two outer parts. The borders do not show signs of having hinges, indicating that the work was meant as a stand-alone panel, and not as part of a triptych.Nash (2008), 31 The corners are assembled with mortise and tenon. Each corner is reinforced by two pegs.Verougstraete (2015), 246 The boards were originally painted a uniform brown, and were degraded by gloss and overprint over the centuries.
This included the Queen's throne, bed, chair, footstool, and neck rest that had been covered in fine gold leaf. Stewart discovered that the furniture was constructed using mortise and tenon joints. After nearly three years of work (mostly in a tent in the Giza desert, with one assistant), the pieces were displayed at the Cairo Museum. The many sketches, papers and notes made by Stewart on this project were discovered in a shed in Perthshire when his eldest daughter died in 1981.
The Bowling Eldridge House, also known as Ridgecrest, is a historic plantation house located near Lynchburg, Bedford County, Virginia. It was built between 1822 and 1828, and is a two-story, five bay dwelling of mortise-and-tenon frame construction. It has a gable roof with metal sheathing, exterior gable- end brick chimneys, a brick foundation, and beaded weatherboard siding. There is also an integral or earlier two-story ell with an exterior gable-end brick chimney and a pent room.
In their current placement the sculptures are elevated to eye level on matching tall, narrow, rectangular stone bases constructed in three pieces and held together via mortise and tenon. The sculptures differ in that each is shown with a traditional iconographic indicator of the depicted season. Spring, to which the IMA assigned accession number LH2001.238, is distinguished by the presence of flower blossoms. The putto stands with his left leg forward, supporting on his left hip a woven basket filled with blossoms.
A through mortise is used in this wooden hinge Brick mold from ancient Egypt held together with mortise joints A mortise is a cavity cut into a timber to receive a tenon. There are several kinds of mortise: ;Open mortise:a mortise that has only three sides. (See bridle joint). ;Stub mortise:a shallow mortise, the depth of which depends on the size of the timber; also a mortise that does not go through the workpiece (as opposed to a "through mortise").
Mann concluded that the Swaggerty Blockhouse was likely a cantilever barn built around 1860 by Jacob Stephens, rather than a frontier blockhouse built by James Swaggerty in 1787. The Swaggerty Blockhouse lacks certain characteristics typical of a frontier blockhouse, such as gun portals and a short degree of cantilever (2 feet or less). The mortise-and-tenon notching and frame design of the third story are more indicative of a 19th-century cantilever barn. The cutting date of the structure's logs (ca.
Just-Marie-Marcellin Lucas-Championnière (1912) Just-Marie-Marcellin Lucas- Championnière (15 August 1843, in Avilly-Saint-Léonard - 22 October 1913, in Paris) was a French surgeon. From 1860 he studied medicine in Paris, receiving his medical doctorate in 1870 and his agrégation in 1874. In 1874 he qualified as a hospital surgeon, and during his career was associated with the hospitals Cochin, Lariboisière, Tenon, Saint-Louis, Beaujon and Hôtel-Dieu in Paris. In 1906 he retired as a hospital surgeon.
The framing, reputed to be grey ironbark, is generally square in section, hand cut and assembled off site prior to the final erection. Roman numerals and runes are inscribed in the timber to identify the position of each structural member. Joints, including cross- halved, checked and mortise and tenon, interlock the timber members giving the frame greater structural rigidity. Each member must be placed into position in the correct sequence during erection due to the complexity of the jointing system.
Finely made piccolos are often available with a variety of options similar to the flute, such as the split-E mechanism. Most piccolos have a conical body with a cylindrical head, which is like the Baroque flute and later flutes before the popularization of the Boehm bore used in modern flutes. Unlike other woodwind instruments, in most wooden piccolos, the tenon joint that connects the head to the body has two interference fit points that surround both the cork and metal side of the piccolo body joint.
Despite numerous biographies, much of Piaf's life is unknown. She was born Édith Giovanna Gassion in Belleville, Paris. Legend has it that she was born on the pavement of Rue de Belleville 72, but her birth certificate says that she was born on 19 December 1915 at the Hôpital Tenon, a hospital located at the 20th arrondissement. She was named Édith after the World War I British nurse Edith Cavell, who was executed 2 months before Édith's birth for helping French soldiers escape from German captivity.
This technology for ship construction persisted in Egypt for more than one thousand years and the standardization of this earliest phase of plank boat construction in Egypt is striking.Boat-building and its social context in early Egypt: interpretations from the First Dynasty boat-grave cemetery at Abydos , by Cheryl Ward. Antiquity 80: 118–129, 2006, p.124; retrieved March 17, 2008. “No mortise-and- tenon joints or pegs were used to join the edges of planks that made up the angular bottom and sides of Boat 10.
The stalls and pews in the crossing, by Seddon, are similar to the pews in the nave (being of pitch pine with pegged tenon joints) but are more ornate, with open-arcaded front kneelers and two reading desks with triple pointed arches to the fronts and scrolled tops to the uprights. At the entrance to the south transept is the organ. This is by Forster and Andrews, of Hull. This organ building company was formed by James Alderson Forster (1818–1886) and Joseph King Andrews (1820–1896).
Big Otter Mill, also known as Forbes Mill, is a historic grist mill located near Bedford, Bedford County, Virginia, USA. It was built about 1920 and is a large, 2½-story, mortise-and-tenon framed mill building, topped by an unusual and picturesque mansard roof. The mill retains a nearly complete set of early-20th century machinery, including a 13-feet diameter water wheel, which was used until the late 1940s. Also on the property are a contributing mill race and the foundation of a store.
In 2004, Accu-Systems was rewarded a Challengers Award at the 2004 International Woodworking Fair "for its MMTJ single-sided CNC machine miter, mortise and tenon machine." In 2006, AccuSystems filed for Chapter 11 bankruptcy. In September 2010, AccuSystems announced the acquisition of Xtria RMS. AccuSystems' software, known as AccuAccount, is mainly used to electronically scan, store, and manage loan files and any other associated paperwork, while the Xtria RMS software, now known as Tickler, is used by financial institutions to track filing and transaction deadlines electronically.
In 1951, President Clark purchased and restored the Old Adobe Schoolhouse with his own resources, then donated it back to the people of Grantsville. When he died in 1961, his farm passed down to his children who later sold it. The Clark Historic Farm The barns beautifully display the craftsmanship of early Grantsville settlers, with hand-hewn beams and mortise and tenon construction. Although wooden pegs were used in place of nails throughout the barns, the structures stand plumb and strong after nearly 125 years.
A steep flight of concrete steps cut into the retaining wall to Mill Street alight onto a concrete path that finishes at a set of low timber steps to the open front verandah. The verandah balustrade is infilled with weatherboards and the floorboards are painted. Notches for mortise and tenon joints to the verandah posts may indicate the location of earlier balustrading. The front entrance door opens from the verandah into a central living area which is divided by a partition lined with vertical timber boards.
Tenon and mortice work of tie beams and cross beams, Yingzao Fashi Some of Li's book used material from preexisting architectural writings, but most of it is documentation of the inherited traditions of craftsmen and architects passed down by word of mouth. Li's book provides a glossary of technical terms that includes mathematical formulae. He incorporated topography in his estimations for buildings on various types of sites. He also estimated the monetary costs of hiring laborers of different skill levels and types of expertise in crafts.
Closeup of a carved stone tenon-head embedded in wall of Tiwanaku's Semi-subterranean (Sunken) Temple Tiwanaku's influence, most clearly documented by the presence of its decorated ceramics, expanded into the Yungas and influenced many other cultures in Peru, Bolivia, and northern Argentina and Chile. Some statues at Tiwanaku were taken from other regions, where the stones were placed in a subordinate position to the Gods of the Tiwanaku. They displayed the power that their state had over others.Blom, Deborah E. and John W. Janusek.
The wood rotates between the headstock of the lathe which includes the drive mechanism and the tailstock support, which only rotates if its center is 'live' or supported by a rotating holding device. The headstock end may use points or spurs which are driven into the wood. This type of turning is described as 'between centers.' The headstock spindle may also use a cup, collet, or a scroll chuck to hold a tenon on the workpiece which will be removed in the finished product.
Three years after the house was completed, the Golls erected a barn to shelter their different types of livestock: horses, dairy cows, and possibly pigs. Like the house, the barn employed distinctive construction methods; its structure was based on wooden mortise and tenon construction, with the massive beams being made from oak trees cut on the property. In later years, the barn was modified several times; one of these renovations involved the raising of the entire structure by one story to simplify the keeping of livestock.
Greenlee is an American industrial and electrical tool company headquartered in Rockford, Illinois. It was founded in 1862 by brothers Robert and Ralph Greenlee to manufacture their invention, a drill surrounded by four chisel blades, used in making the pockets for a mortise and tenon joint, for the furniture industry in Rockford. This device is still used in cabinetmaking. The brothers later diversified into a variety of hand woodworking tools as well as machinery for making wooden barrels. The company was acquired by Textron in 1986.
These stools were of two forms, the boarded or Gothic stool, a short bench with two board-like feet at the ends and also the simple turned stool. Turned stools were the progenitor of both the turned chair and the Windsor chair. The simplest stool was like the Windsor chair: a solid plank seat had three legs set into it with round mortice and tenon joints. These simple stools probably used the green woodworking technique of setting already-dried legs into a still-green seat.
It is the first accountancy firm to be listed there.Tenon to step up to main market in May , Accountancy Age, 28 April 2010 At the end of June 2010, RSM Tenon paid £6.8 million to acquire several offices from rival consolidator Vantis, when the latter entered administration and was broken up. The acquired businesses had a turnover of £27 million in the preceding year,RSM buys Vantis businesses, Financial Times, 1 July 2010 and contributed to a 31% increase in turnover for the year ended June 2011.
By this time Forbestown was the largest town in the area, with hotels, saloons, doctors, a Justice of the Peace, shoe shops, a water company, general merchandise stores and even a brass band. Nearby Brownsville was growing too, with a lumber mill, cemetery, hotel and shops. It wasn't long before Abbott House had a new name - Woodville. Joseph constructed a barn made of hand-hewn beams measuring sixteen to twenty inches thick and fitted with mortise and tenon joints fastened by hand-carved wooden pegs.
The cowl could then be lifted off the tenon at the top of the centre post and lowered down the kiln. Ropes were also tied at each end of the tie beam if present. The cowl could either be lowered inverted, or alternatively, a ladder would be placed against the kiln roof and the cowl be carried down by the wheelwright, the weight being mainly taken by those in the kiln working on the rope. It was important to avoid damaging the kiln roof.
Carl J. Ekberg and Anton J. Pregaldin, Louis Bolduc: His Family And His House, Tucson, AZ: The Patrice Press, 2002 The steep hip roof, made of cedar shakes, was supported by heavy, hand-hewn Norman trusses held together by mortise and tenon joinery. It extends over the four sides of the house's porches to provide shade and cooling. The house is surrounded by a reconstructed stockade fence typical of the time (to keep out livestock that roamed in the area). Gardens have been reconstructed on the grounds.
The hull planking is also poorly preserved, but there were, however, thirteen strakes that may serve for extrapolation to the design of the entire ship. The strakes were fastened together by pegged mortise and tenon joinery and assembled in the classic shell-first construction. The spacing between mortises and the width of the mortises is very tight and they also appear to be slightly wider than the tenons. It is believed that the space left within the mortises was intended to compensate for possible misalignment of opposite mortises.
A small piece of gold is inserted into the "queen post", either at its top or on one of the floor binders when mortised through the "queen post" and fixed by the wooden tenon. These posts are set as if they are still living trees, with the trunk base at the bottom and crown tip above. The last to be built are the roof plates. Ropes are used to fix the roof plates to the beams in such a way that the roof can be detached quickly in case of fire.
Maurice Klippel (30 May 1858 - 20 July 1942) was a French physician, for whom the conditions Klippel–Feil syndrome and Klippel–Trénaunay–Weber syndrome are named. He was born in Mulhouse, Haut-Rhin and studied medicine in Paris, earning his doctorate in 1889. In 1902, he became director of a department of general medicine at the Hôpital Tenon, where he remained until his retirement in 1924. He published articles on a wide array of medical topics, his best known written works being in the fields of neurology and psychiatry.
Three backsaws: dōzuki (top), Gent's saw and Tenon saw A backsaw is any hand saw which has a stiffening rib on the edge opposite the cutting edge, enabling better control and more precise cutting than with other types of saws. Backsaws are normally used in woodworking for precise work, such as cutting dovetails, mitres, or tenons in cabinetry and joinery. Because of the stiffening rib, backsaws are limited in the depth to which they can cut. Backsaws usually have relatively closely spaced teeth, often with little or no set.
After graduating, Kucan moved back to California and became the lead designer for Hollywood's Mortise and Tenon and founded the Raw City Home Lounge design team. From 2005-2006, Daniel was the resident carpenter on Extreme Makeover: Home Edition, and was known for building in recycled and renewable materials, often resulting in unique compositions of off-beat character. Subsequently he hosted the Home & Garden Television series "Desperate Spaces" along with Lise Simms. From 2012 to 2013 he co-hosted the A&E; networks "Sell this House: Extreme" along with Tanya Memme.
This structure lasted three years, until December 1999 when the Board of Directors of the company resolved to dismantle the Fletcher Challenge and establish separate companies. In 2000 the Canadian pulp and paper assets were sold to Norske Skog to form NorskeCanada. In 2001 Fletcher Challenge was split into three companies, Fletcher Challenge Forests (later renamed Tenon), Fletcher Building (incorporating Fletcher Construction), and Rubicon. A September 1996 investment in Central North Island Forest Partnership ended in receivership and is said to have contributed to the break up of Fletcher Challenge.
The basement has exposed hewn ceiling beams wity a pulley for the butter churn once there. The attic's mortise and tenon framing is set at a wide angle and pegged without a ridge beam, a common practice in the middle of the 19th century. The two-story kitchen wing on the east has an early 20th- century kitchen on its second floor, with dry sink, hand pump and coal stove. Outbuildings start with a single-story gabled barn to the south with a shed addition on its west.
Henri-Alexandre Danlos (26 March 1844 - 12 September 1912) was a French physician and dermatologist born in Paris. With Danish dermatologist Edvard Ehlers (1863-1937), the Ehlers–Danlos syndrome is named, which is a group of inherited connective-tissue disordersMedical Dermatology Specialists, Cosmetic & Medical Dermatology, Amabella Goulet, 22 March 2015. He studied medicine in Paris, and during the early part of his career, performed research in the laboratory of Charles-Adolphe Wurtz (1817-1884). In 1881, he became médecin des hôpitaux, and four years later was chef de service at the Hôpital Tenon in Paris.
A high ankle sprain, also known as a syndesmotic ankle sprain (SAS), is a sprain of the syndesmotic ligaments that connect the tibia and fibula in the lower leg, thereby creating a mortise and tenon joint for the ankle. High ankle sprains are described as high because they are located above the ankle. They comprise approximately 15% of all ankle sprains. Unlike the common lateral ankle sprains, when ligaments around the ankle are injured through an inward twisting, high ankle sprains are caused when the lower leg and foot externally rotates (twists out).
Shelburne Museum’s collection of woodworking tools encompasses a wide variety of hand tools and machinery that craftspeople, such as carpenters, joiners, cabinetmakers, and coopers, used to provide essential goods and services to their local communities. Craftsmen, who worked primarily with readily available, native woods, required specialized tools to create their products. To construct buildings, early settlers would fell trees using axes and shape the logs into heavy, squared lumber with adzes. They would then interlock the lumber using mortise and tenon joints, secured with wooden pins, to create a structure's frame.
Weiner states that the widespread acceptance of the stethoscope would likely not have happened in any other setting, and the setting allowed for Laennec to pass on this technology to the eager medical community that had gathered there. This invention also brought even more attention to the Paris scene. Before the start of the 19th century, there were many problems existing within the French medical system. These problems were outlined by many seeking to reform hospitals including a contemporary surgeon Jacques Tenon in his book Memoirs on Paris Hospitals.
Chain mortiser A number of very specialised chain types have emerged over recent years. These include chains made of steel alloys optimised for cutting in extremely cold conditions, chains with tungsten carbide teeth for very dirty conditions and rescue work, ripping chains with altered blade geometry for making ripping cuts, and milling chains for chainsaw mills. Chain mortisers, used to cut the mortice of large mortice and tenon timber framing, use a number of chains, riveted side-by-side. They are used with a vertical tip-first plunge.
Wegner said of his work, "I have always wanted to make unexceptional things of an exceptionally high quality." Many of Wegner's wooden chairs are characterized by traditional joinery techniques including mortise and tenons, finger joints, and sculpted elements such as armrests and seat supports. In the early models of the Round Chair, Wegner used a mortise and tenon joint to connect the arms at the middle of the backrest. Wegner was dissatisfied with the way that this looked and wrapped the backrest in cane to hide what he considered to be an unsightly design.
Unhappy with this compromise and the deceptive illusion that the arms and backrest were constructed from a single piece of wood, Wegner later updated the design to use a zigzag patterned finger joint to connect the three parts. In the Peacock chair, the connection of the legs to the seat is accentuated by the use of a darker wood wedge in the mortise and tenon joint. These features emphasize the process involved in bringing the furniture together and help inform the user of the craftsmanship employed in his work.
SHRIMPs cylindrical end The secondary assembly was the actual SHRIMP component of the weapon. The weapon, like most contemporary thermonuclear weapons at that time, bore the same codename as the secondary component. The secondary was situated in the cylindrical end of the device, where its end was locked to the radiation case by a type of mortise and tenon joint. The hohlraum at its cylindrical end had an internal projection, which nested the secondary and had better structural strength to support the secondary's assembly, which had most of the device's mass.
The entrance to the garden is flanked by two lion statues which were hand- sculptured from solid granite and gifted to the Dunedin Chinese Garden Trust by the Municipal Government of Shanghai. Just in front of the main door, a "river" forms a boundary between the outside and inside worlds.Information from Lan Yuan, Dunedin Chinese Garden visitor brochure Traditional Chinese construction methods were applied throughout the garden to avoid the use of any nails or other corrodible materials. All wooden structures, made from Chinese fir, are held together using mortise and tenon joints.
It was a three- story post-and-beam structure with a full basement. The posts were to square. It was deemed significant as it probably was Louisa's oldest extant industrialand commercial establishment and it had "reinforced Louisa's regional status as a trade town, as it would bring area farmers here to trade their grain or to get it processed", and it was "a rare example of post and beam/mortise and tenon construction of such a large building for Eastern Kentucky." With Site, in 2014 The building appears to have been demolished by 2014.
The bulk of drum and bass vinyl records and CDs are distributed globally and regionally by a relatively small number of companies such as SRD (Southern Record Distributors), ST Holdings, & Nu Urban Music Limited. As of 11 September 2012, Nu Urban ceased trading and RSM Tenon were instructed to assist in convening statutory meetings of members and creditors to appoint a liquidator. This left many labels short on sales, as Nu Urban were one of the main distributors for the vinyl market in the drum and bass scene.
Uusvada tsässon is a small one-storied unhewn pine cross-beam building, which has a square floor plan and a gable roof, the outer measurements are 308 x 409 cm; the building has one interior room (7.2 m2) and an external shelter (2.5 m2). The shelter has wane beam posts and a horizontal wide boarding fence. The main part of the building is covered by narrow horizontal boarding from the outside; from the inside the beams are uncovered. The beams are bound by axe-hewn corner tenon joints from the corners.
Oak Lawn is a historic plantation house and national historic district located near Huntsboro, Granville County, North Carolina. The plantation house was built about 1820, and is a two-story, five bay, transitional Federal / Georgian / Greek Revival style heavy timber frame dwelling. Also on the property are the contributing one-room former dwelling, smokehouse, barn, office, two-room kitchen, a small mortise and tenon barn and attached shed, a long frame packhouse, frame chicken barn, frame corn crib, and frame packhouse. It was listed on the National Register of Historic Places in 1988.
A clarinet mouthpiece set up to play with the reed held in place with the ligature The clarinet mouthpiece is narrow inside and typically has a square or rectangular cross section from the baffle through the throat. The bottom of the mouthpiece is formed with a tenon that is ringed with cork. Today, as with the saxophone mouthpiece, the reed is placed against the surface (the table) closest to the player's bottom lip. However, this was not always so: The earliest clarinetists would often place the reed on top of the mouthpiece.
Fine tuning of the Inventionshorn remained a problem until J. G. Haltenhof replaced the tenon and socket fittings with slides in 1776. About 4 years later the Parisian instrument makers Joseph and Lucien-Joseph Raoux, in collaboration with Carl Türrschmidt,See entry for Carl Türrschmidt at Horn History list of performers. came out with the cor solo, a refined version for soloists with crooks in G, F, E, E, and D. (Orchestra players needed more crooks, since they needed to play in more keys). The Inventionshorn design was also applied to other brass instruments.
Union Valley Congregational Church, also known as Union Valley Community House, is a historic Congregational church located at Taylor in Cortland County, New York. It was built about 1849 and is a modestly scaled, one story meetinghouse building with a mortise and tenon timber frame built on an above grade rubble stone foundation. It is rectangular in shape, three bays wide and three bays deep, in the Greek Revival style with an overlay of Late Victorian elements. It features a stout belfry that risesfrom the crest of the roof.
Paul Berger by Evert van Muyden Caricature of Paul Berger flanked by two of his colleagues from the Faculté de médecine de Paris, Victor Cornil to left holding a pair of lungs, and Felix Guyon to right with a syringe by Adrien Barrère (1904) Paul Berger (; 6 January 1845 Beaucourt, Territoire de Belfort – 1908) was a French physician and surgeon who practised in Paris at the Hôpital Tenon and was Professor of Clinical Surgery and Pathology at the Faculté de médecine de Paris. He is noted for Berger's operation, a method of interscapulothoracic amputation, and for improvements in hernia/intestinal suturing.
The Williamson House is located in a rural setting in northern Goshen, on the north side of a bend in Messer Road, about east of Nutting Road. It is a -story wooden house, with a gabled roof and clapboarded exterior. It is distinct in Goshen's cluster of plank-frame houses in its use of two-inch planking instead of the more typical three inches. The walls are further likely to be load-bearing, as the house lacks corner posts, and are pinned to the frame rather than the more typical mortise-and-tenon method seen in other such houses.
It was, however, not built entirely shell-first, but involved some elements of skeleton or frame- first construction. The keel, extended by a long fore foot ending with a concave stempost tilted towards the back, was laid first, then edge jointed by mortise (10 to 12 cm deep and 8 cm wide) and tenon (20 to 22 cm long, 8 cm wide, and 1.5 cm thick), construction to three strakes. This first section of the ship, the keel and the first three planks, was made from elm. Floor timbers were then bolted directly to the keel, giving greater rigidity to the internal skeleton.
These are manufactured in squares and the edges fit together like a mortise and tenon joint. Like a floor on joists not on concrete, a second sheeting underlayment layer is added with staggered joints to disperse forces that would open a joint under the stress of live loads like a person walking. Three layers are common only in high end highest quality construction. The two layers in high quality construction will both be thick sheets (as will the third when present), but the two layers may achieve a combined thickness of only half-that in cheaper construction panel overlaid by plywood subflooring.
Though there is a tenon on top of the stone slab, scholars have argued this would not have supported a cross -head and could indicate that the Sun Stone played an architectural function. The ‘Cuddy Stane’ has gotten its name from its rider's steed, which appears more like a donkey than a horse. The stone has been damaged since it was illustrated in 1856, which records the rider's upper half and the shape of the cross-head. While the stone appears plain today, this is likely because it has been severely eroded; hints of a panel of interlace are preserved under the horseman.
When timber was available, many crannogs were surrounded by a circle of wooden piles, with axe-sharpened bases that were driven into the bottom, forming a circular enclosure that helped to retain the main mound and prevent erosion. The piles could also be joined together by mortise and tenon, or large holes cut to carefully accept specially shaped timbers designed to interlock and provide structural rigidity. On other examples, interior surfaces were built up with any mixture of clay, peat, stone, timber or brush – whatever was available. In some instances, more than one structure was built on crannogs.
Since v2.0, Lasso was fully multithreaded, allowing many connections at once, but succumbed to FileMaker's latency or lag in certain operations, and there was no way to get around it reliably other than to make major changes to the data source. Lasso 5 also added support for Apache HTTP Server natively under OS X, Windows, and Linux, joining Webstar 5, AppleShare IP (which was replaced by OS X Server), and iTools (from Tenon). (Mac OS 9, on which Lasso had been used for many years, was unsupported). This drove closer ties to a classic LAMP server architecture.
Le syndicalisme en Polynésie française de 1852 à nos jours In 1959 he became a councillor in the Leeward Islands, replacing his deceased uncle. In 1960 Marcel Oopa was elected to the French National Assembly from the French Polynesia seat in a by-election, after his imprisoned father had been deposed from his parliamentary seat. Marcel Oopa sat in the group 'Popular Republicans and Democratic Centre' (RPCD, the parliamentary faction of the Popular Republican Movement).France - Assemblée Nationale et Gouvernement de la V République (depuis 1958) Marcel Oopa died in cancer at the Tenon Hospital in Paris on July 14, 1961.
The John Shastid House is a timber frame house, a style which used wooden beams for structural support. The house is built from squared beams connected by mortise and tenon joints, the characteristing method of timber frame construction; the style differs from both log cabins, which used rounded logs, and balloon framing, which typically used nails and smaller beams. The beams were hewn rather than sawn, an unusual technique that likely resulted from Pittsfield's lack of a sawmill in 1838. Well-preserved timber frame houses are rare in Illinois, and the Shastid House is the only surviving example of the method in Pittsfield.
He remained the managing director of Tenon Developments Ltd until his death. While the research project was dropped by the New Zealand Dairy Group, McLachlan's interest in the subject of cholesterol and heart disease remained. He spent five years investigating a potential connection between A1 beta casein protein consumption and heart disease. In 2000, he formed A2 Corporation, backed by Howard Paterson to license technology for testing, production and use of milk containing only the A2 beta casein protein and no A1 protein (primarily which the BCM-7 peptide is a variant of) in cows' DNA.
Large pillars supporting roof slabs Some specific architectural features which evolved with the Bayon style are clearly discerned in this temple. The roof is supported on free-standing pillars in the eastern and western pavilions in the third enclosure, built in a cruciform plan with the inner row of pillars supporting the roof. The pillars are also tied to the wall by a tie beam using a "mortise–and–tenon join" patterned on wooden structures. Other features noted are of the four central pillars in the western pavilion which have been strengthened with temporary supports of laterite stone block pillars.
This vibration sets the air column in the instrument in rapid periodic motion, creating sound. The mouth does not contact the reed. Seven or eight finger- holes are positioned 90 degrees out of line with the reed, though this is adjustable in the common two-piece instruments provided with a metal tenon. The bawu typically has a range of an eleventh: on an instrument in "G" (according to Chinese custom the note with three upper finger holes down) this range is from B to E. The range is often misreported as a ninth, omitting two underblown notes.
The axle was attached to the wheels with oak wood wedges, which meant that the axle rotated together with the wheels. The wheel was made from a tree that grew in the vicinity of the pile dwellings and at the time of the wheel construction was approximately 80 years old. It appears that the wheel itself is primarily made of two "planks" of wood which are held together with four cross braces. The cross braces appear to have been held in place simply by a tenon arrangement, the braces being fitted into tenoned slots carved into the two main wheel sections.
From material recovered he added the knowledge that mortise and tenon joints had been used in their construction. Despite the successful salvage of entire structures and parts, there was no academic interest in the ships, so no further research was performed. The objects recovered were lost and their fate remains unknown. An artistic depiction of a Nemi Ship by CM Knight-Smith, c 1906 By 1827, interest had revived and it had become a widespread belief that earlier material recovered had either been part of a temple to Diana or was from the villa of Julius Caesar cited by Suetonius.
Imperator Aleksandr III was built by the Russud Shipyard at Nikolayev. She was laid down on 30 October 1911, but this was just a ceremonial event as the design had not yet been finalized or the contract signed. She suffered from a number of delays during construction. First the method of fastening the armour to its supports was changed and the armour plates were locked together by a type of mortise and tenon joint to better distribute the shock of an impact based on the full- scale armour trials conducted using the hulk of the old pre-dreadnought battleship in 1913.
BrewDog won the 2008 Prince's Scottish Youth Business Trust Young Entrepreneur of the Year award. Paradox Grain won a Gold Medal at the 2008 World Beer Cup in the Wood and Barrel-aged Strong Beer Category. BrewDog won the Tenon Entrepreneur of the Year Award for demonstrating exceptional vision and leadership at the 2008 National Business Awards for Scotland. The Physics won World's Best Strong Pale Ale (Sub Category Winner) and Rip Tide won World's Best Imperial Stout (Style Trophy Winner) at the 2007 World Beer Awards, an annual competition organised by Beers of the World magazine.
As Jacques Tenon would note in his Mémoires sur les hôpitaux de Paris (1788), the sanitary conditions were horrendous, facilities were overcrowded and there was a high mortality rate in these hospitals. The Hôtel-Dieu was "the most unhealthy and uncomfortable of all hospitals", with a mortality rate of almost 25 percent. Even though it was the largest of Paris' hospitals with 1,200 beds, many beds held three or more patients—women gave birth in shared beds and there was no separation amongst patients with contagious diseases. The 1,200 beds in the hospital were completely inadequate for housing its over 3,500 patients.
The full-scale armor trials with the hulk of the old pre- dreadnought battleship greatly affected the armor protection of the Imperatritsa Mariya-class ships. The Krupp cemented armor plates were sized to match the frames to provide support for their joints and they were locked together by a type of mortise and tenon joint to better distribute the shock of a shell's impact. The waterline belt had a maximum thickness of . It was continued forward and aft of the citadel by plates and thick. These reduced to and then to 75 millimeters just before the bow.
Timber-framed structures differ from conventional wood-framed buildings in several ways. Timber framing uses fewer, larger wooden members, commonly timbers in the range of 15 to 30 cm (6 to 12 in), while common wood framing uses many more timbers with dimensions usually in the 5- to 25-cm (2- to 10-in) range. The methods of fastening the frame members also differ. In conventional framing, the members are joined using nails or other mechanical fasteners, whereas timber framing uses the traditional mortise and tenon or more complex joints that are usually fastened using only wooden pegs.
The cross head is in diameter. It is made from a single piece of Pennant sandstone, although a thin tenon on its base suggests it was made to fit into a pedestal socket. Stylistically the splayed arms and wide circular armpits are similar to 10th- century crosses from the north of England. Date: 10th century ;Inscription:I[N] NOMI NE D[E]IS UM[M]I CRUX CRITDI PROP ARABIT GRUTNE PRO AN[I]MA AHEST ::'In the name of God the most High This cross of Christ was erected by Grutne for the soul of Ahest' ;Location: Margam Churchyard No 7.
District School Number Five, also known as "The Little Red Schoolhouse," is a historic one room school building located at Campbell in Steuben County, New York. It was built during the spring and summer of 1839 with a hand hewn timber frame of mortise and tenon construction. The schoolhouse is part of the Watson Homestead Conference and Retreat Center, deeded to the Genesee Conference of the Methodist Church by IBM founder Thomas J. Watson, Sr. Watson attended the school as a child. Also on the property is a small frame structure that served as privy and woodshed.
The building itself is constructed entirely of English oak, with mortise and tenon joints and is, in this sense, an "authentic" 16th-century timber-framed building as no structural steel was used. The seats are simple benches (though cushions can be hired for performances) and the Globe has the first and only thatched roof permitted in London since the Great Fire of 1666. The modern thatch is well protected by fire retardants, and sprinklers on the roof ensure further protection against fire. The pit has a concrete surface, as opposed to earthen-ground covered with strewn rush from the original theatre.
Berger was a French physician and surgeon who practised in Paris at the Hôpital Tenon and was Professor of Clinical Surgery and Pathology at the Faculté de médecine de Paris. He developed a method of interscapulothoracic amputation, called Berger's operation after him, and for improvements in hernia/intestinal suturing.Formestraux, J. de. Biographies Medicales (1934)"A Bibliography of Medical and Biomedical Biography" - Morton & Moore (3rd edition, 2005) In October 1882 Berger amputated the whole upper limb of a patient with an enchondroma of the humerus, publishing a report the following year. In 1887 he published “L’Amputation du Membre Superieur dans la Contiguite du Tronc”, a detailed monograph on forequarter amputation.
The oldest archaeological examples of mortise and tenon type woodworking joints were found in China dating to about 5000 BC. The Yingzao Fashi is the oldest complete technical manual on Chinese architecture. The Chinese followed the state rules for thousands of years so many of the ancient, surviving buildings were built with the methods and materials still used in the 11th century. Chinese temples are typically wooden timber frames on an earth and stone base. The oldest wooden building is the Nanchan Temple (Wutai) dating from 782 AD. However, Chinese temple builders regularly rebuild the wooden temples so some parts of these ancient buildings are of different ages.
In 1787 with Tenon he visited the Royal Naval Hospital, Stonehouse and they were impressed by the revolutionary "pavilion" design and recommended it to the French government. On the outbreak of the Revolution in 1789, he resigned his appointment as intendant des eaux et fontaines and retired to a small estate which he possessed at Blois. He was recalled to Paris for a time in order to take part in the new determination of weights and measures, which had been decreed by the Revolutionary government. He became one of the first members of the French National Institute and was appointed inspector of public instruction in 1802.
One possibility is that the change occurred because of the gradual evolution of the ancient shell-first mortise and tenon hull construction method, against which rams had been designed, into the skeleton-first method, which produced a stronger and more flexible hull, less susceptible to ram attacks. Certainly by the early 7th century, the ram's original function had been forgotten, if we judge by Isidore of Seville's comments that they were used to protect against collision with underwater rocks. As for the lateen sail, various authors have in the past suggested that it was introduced into the Mediterranean by the Arabs, possibly with an ultimate origin in India.
The central bays are the widest and grow narrower toward the extremities to draw attention to the center of the building. The bay lengths are the same across both floors except for the outermost of the second floor, which are half the length of the lower floor. The exterior and interior columns are connected laterally at the heads with mortise and tenon joints, reinforced with thick lintels that rest on the tenons, and to each other by a series of crossbeams. The extensive latticework installed between the columns allows light to flood the inner sanctuary and creates a more open environment than other contemporary structures.
The Danish Bronze Age ship, Hjortspring, is the earliest evidence for clinker construction in Northern Europe dating to the 4th century BCE. The most well-known examples of this construction type are attributed to the Vikings with ships like the Oseberg, Gokstad, The Roskilde Viking ships and the Schlei fjord wrecks, just to name a few. Carvel building was one of the critical developments that led to the pre- eminence of Western European seapower during the Age of Sail and beyond. Carvel construction developed from the age-old Mediterranean mortise and tenon joint method to the skeleton-first hull building technique, which gradually emerged in the medieval period.
Sunset over Lough Gill with Parke’s Castle in Foreground The castle had extensive and sensitive restoration carried out at the end of the 20th century by the Office of Public Works. The window glazing was reinstated, and local artisans restored the timber stair and the mortise and tenon oak roof, using techniques of the 17th century. The walls of the original bawn were a spacious pentagonal defensive area, with the O'Rourke tower house placed in the centre of the courtyard. The stones of O’Rourke’s tower were used to build the three-storey manor on the eastern side, eventually adorned with mullioned windows and diamond-shaped chimneys.
Day also employed dovetail and mortise- and-tenon joint techniques in his crafting. Day often used mahogany veneers on his furniture, a technique he came to be known for. Common motifs found in Day's furniture include s-scroll and s-curve shapes as well as thumb shapes in both positive and negative space. The scroll and curve shapes were often used as support pieces for his furniture, such as armrests and legs on chairs and tables, and were employed as a distraction from the large size and heaviness of some of his pieces, especially those that followed the early Gothic trends of large arched designs topping wardrobes and bookshelves.
The land on which Marburg was built was previously part of a larger 90 acre farm called "Beechwood Farm" owned by wealthy merchant Bolling Haxall during the mid-19th century. Haxall did not reside at Beechwood Farm, but instead used it as a tenant farming operation for added income. Maps from the period show several farm structures in the general vicinity of these cottages but all were thought to have been lost over time. Dixon Kerr, a noted window restoration expert who rehabilitated the old windows, discovered they were single hung sashes with mortise and tenon joinery, both of which date to the antebellum period.
The island features a prominent black and white stucco-covered wood pyramidal daybeacon, or channel marker, resting atop a granite base erected by the Boston Marine Society in 1805. Reaching a height of approximately , the beacon serves as a Federal aide to navigation, warning passing ships of one of the harbor's most hazardous shoals. Originally sheathed in slate shingles, the pyramid likely received its concrete coating some time between World War I and World War II. A granite block stairway accesses the pyramid at the base's south side. The pyramid's hollow innards comprise a mortise-and-tenon wood structural system supported by cross-members radiating from a central column.
Details from below Decorative rings and ogees between the structural ribs of the bridge suggest that the final design was Pritchard's, as the same elements appear in a gazebo he rebuilt. A foreman at the foundry, Thomas Gregory, drew the detailed designs for the members, resulting in the use of carpentry jointing details such as mortise and tenon joints and dovetails. The two outer ribs are engraved with the words: "This bridge was cast at Coalbrook-Dale and erected in the year MDCCLXXIX". Two supplemental arches, of similar cast iron construction, carry a towpath on the southern bank and also act as flood arches.
In 1923 Henri Lechat published an inventory of the collection of casts of the Lumière University Lyon 2 where he described the statue as "the upper part of a statue of Aphrodite ... clad in the Ionian fashion... a kore, specifically a goddess by the polos on her head and identified as Aphrodite by the done in her right hand." But Pane refuted this hypothesis, arguing that the polos is not strictly a divine attribute and restated the hypotheses that it was a caryatid on account of a hole present at the top of the head for the attachment of a tenon, or a votive statue on account of its small size.
The bracing cross pieces of the lower frame structure are applied, while there are at the top of the cross pieces of wood mortise and tenon joints. The pediments over the open belfry are crowned with golden knobs, and the roof spouts are decorated with Gargoyles from painted copper sheets. The subsequent installation of two tie rods was done in 1778, and included the removal of the shingle at the bottom of the screen for the installation of tie rods, in order to stabilize the pointed helmet. These were anchored to the belfry and thus passed the bells vibrations directly to the construction of the turret's vault.
The boat's construction conforms to other boats built in that part of the Mediterranean during the period between 100 BCE and 200 CE. Constructed primarily of cedar planks joined together by pegged mortise and tenon joints and nails, the boat is shallow drafted with a flat bottom, allowing it to get very close to the shore while fishing. However, the boat is composed of ten different wood types, suggesting either a wood shortage or that the boat was made of scrap wood and had undergone extensive and repeated fixes. The boat was row-able, with four staggered rowers, and also had a mast allowing the fishermen to sail the boat.
The Dazheng Hall(大政殿) and the Shiwang Pavilion(十王亭)built for the Nurhachi period. It was founded in 1625 and is the place where the emperor held the "Great Ceremony" and the office of the Eight Banners Minister. Dazheng Temple is an octagonal heavy-duty building with a yellow glazed tile and green trimming, 16 multicoloured glazed ridges, large wooden frame structure, with Mortise and tenon joint, flying roof arch, colour painting and dragon plate, which is the traditional architectural form of the Han Dynasty. Additionally, the decoration of Cintamani and the Sanskrit ceiling add the feature of the religious and ethnic minority architecture style.
She did win the Tenon Yachtsperson of the Year award. In January 2007 Caffari announced that she would be taking part in the Vendée Globe 2008/09 singlehanded round the world yacht race, again sponsored by Aviva. In March 2007 she announced a technical partnership with Mike Golding to allow both the British entries in the Vendée Globe to work together. In September 2007, Caffari's autobiography Against the Flow was published by Adlard Coles Nautical. In December 2007 she had to be rescued by Royal Navy frigate HMS Northumberland after dismasting in severe weather off northwest Spain whilst competing singlehanded in the Transat Ecover B2B Race.
The house, a mixture of federal and Greek Revival architecture, was originally constructed from a kit manufactured in Cincinnati, the components of which were shipped down the Ohio and Mississippi rivers to Rodney, Mississippi, and transported to Red Lick by wagons along with a crew supplied by the manufacturer, believed to be Hinkle, Guild & Co. The frame of the house, of post-and-beam, mortise-and-tenon construction, includes numerous interchangeable components (indicating manufactured millwork), with Roman numeral markings. The original foundation sills were hewn on site, with manufactured framework of poplar, spruce and fir, exterior siding and trim of cypress, walls and ceilings of tongue-in- groove spruce and fir and floors of heart pine.
Both tools are used for levering out chunks when first clearing out a mortise and so have similarly shaped bevels, often with a curved bevel surface for a better fulcrum action. Slicks are other specialised chisels also used to work on the sides of mortises, but are used for final clean-up to make an accurate and smooth-sided mortise, after the rough chopping has been carried out. In the heyday of the twybil, mortises in small work were often round-ended and so could be cut very quickly by brace and twybil alone, the tenon being rounded to fit.Edlin, Woodland crafts, The curious break and tools used to form mortises in gate hurdles, figures 99 & 100, facing p.
Gustave Michel received a travel bursary for his plaster model.Government cultural site The bronze version was located in Paris in the Square Tenon (now the Square Edouard Vaillant) and was melted down during World War II.A postcard view The statue by Joseph Carlier was placed in a public park in his native Cambrai, a town occupied by the Germans during World War I. It was therefore requisitioned and melted down even earlier.A postcard view Turcan's marble statue is therefore the sole survivor of this period and is representative of what were somewhat similar designs. In Germany too there were compassionate treatments of the theme by Expressionist Christian artists, both dating from 1919.
Forensic pathologist Sir Bernard Spilsbury. Spilsbury supervised the recovery of Emily Kaye's body, and later conducted her autopsy In the bedroom of Officer's House, investigators recovered a "rusty and greasy" tenon saw with a section of flesh still attached, plus numerous articles of bloodstained female clothing and a bloodstained tea towel. A saucer containing solid human fat was discovered upon the floor of the dining room, and a two-gallon saucepan containing a section of boiled flesh was found within the fireplace of this room. The fender of this fireplace was also spattered with body fat, and an examination of the ashes revealed over nine hundred small, charred fragments of human bone.
Mahon admitted having purchased the chef's knife and tenon saw with which he had dismembered Kaye's body, but insisted he had only purchased these instruments after her death.The Trial of Patrick Mahon p. 284 Repeating his claim Kaye's death had been accidental, Mahon collapsed in the dock. On 18 July, Sir Henry Curtis-Bennett cross- examined Mahon, who remained adamant the decision to rent Officer's House had been Kaye's as a means for her to prove her love of him, and he had only acquiesced to the suggestion as a means of proving to her she "could not possibly keep or expect to keep" his affections, as he wished to remain faithful to his wife.
Sharon Temple located in Sharon, Ontario, Canada Second Meeting House, Sharon, Ontario David Willson's Study, Sharon Temple Museum Jacob's Ladder, Sharon Temple The Children of Peace rejected the "plain style" of Quaker architecture and built a series of ornate meeting places designed to "ornament the Christian Church with all the glory of Israel". The building most clearly associated with this imagery is the temple, built over a seven- year period in imitation of Solomon's Temple, and the New Jerusalem described in Revelations 21. The temple is three storeys tall and measures 60 feet square by 75 feet high. The building is of timber frame construction, held together with mortice and tenon joints.
A signature model named for the guitarist (Crimson Guitars Robert Fripp Signature) features Fernandes Sustainer and MIDI pickups with a Les Paul-style Body. A significant difference from the Gibson Les Paul is that the signature model is built using a deep set neck tenon rather than a traditional set neck. Fripp recommended that Guitar Craft students adopt the Ovation 1867 Legend steel-string guitar, which had a shallow body. "Fripp liked the way the Ovation 1867 fitted against his body, which made it possible for him to assume the right-arm picking position he had developed using electric guitars over the years; on deeper-bodied guitars, the Frippian arm position is impossible without uncomfortable contortions", according to Tamm.
In a half lap joint or halving joint, material is removed from both of the members so that the resulting joint is the thickness of the thickest member. Most commonly in half lap joints, the members are of the same thickness and half the thickness of each is removed. With respect to wood joinery, this joint, where two long-grain wood faces are joined with glue, is among the strongest in ability to resist shear forces, exceeding even mortise and tenon and other commonly-known "strong" joints. Wood Magazine "Wood Joint Torture Test" With respect to metal welding, this joint, made by overlapping the edges of the plate, is not recommended for most work.
Tenon was one of the first accountancy firms in the United Kingdom, not wholly owned by its partners, being a public limited company (PLC) listed on the Alternative Investment Market. It was formed as a "consolidator", inviting existing small local accountancy partnerships to join it and become part of a national company. It acquired five firms in April 2001 for £60 million, making it the 15th largest and the first PLC in the United Kingdom league table of accountancy firms.Top 50: New big fish gobbles up mid- tier rivals, Accountancy Age, 26 June 2001 In practice, the company found it difficult to integrate these businesses, and its share price dropped to 6.25p in 2003, following the dot-com bubble.
1859, is a frame structure with mortise-and-tenon construction, made of hand-hewn virgin pine. About 60 years later, a local craftsman and congregation member named Frank B. Haigler added an unusual faux bois finish to all interior surfaces other than the floor. The building was expanded by two Sunday school rooms added after World War II. The cemetery is "laid out in a fairly regular gridiron pattern with a variety of modest stone grave markers and minimal landscaping." with The modern Cartecay United Methodist Church, whose address is 7629 Highway 52 East, in Ellijay, has a new building behind the historic one.The new and old buildings can be seen in photos, e.g.
Compared to the AWM, the bolt action of the AXMC is longer and wider and the internal magazine is lengthened, allowing the unimpaired use of .338 Lapua Magnum cartridges loaded to the C.I.P. (Permanent International Commission for the Proof of Firearms Portable) maximum allowed overall length of . The AXMC bolt is in diameter and the bolt, bolt head, locking ring and barrel tenon construction were designed to be significantly stronger and more capable of handling higher chamber pressures and temperatures and thus higher bolt thrust safely compared to the AWM variant. The bolt construction is significantly revised, allowing the bolt to be field stripped by hand and allowing the more complex removal of the bolt head from the bolt body with simple hand tools.
As well as the house, a number of large outbuildings and farm structures were erected on the raised area, including a brick convict barracks, a large brick barn, a number of stables, blacksmith's shop, carpenter's shop and other associated buildings. The barn, which appears to have been huge, was located to the east of the house and was a solid brick building built from clay stocks interlaced with hard-burnt shale bricks laid in a Flemish bond. The roof of the barn featured "tusk and tenon" joinery which allowed nails to be used sparingly. The men's quarters may also have been built of the same bricks and were described as being behind the barn, having brick floors with lofts above where the servants used to sleep.
The wooden hull, built mostly of pine (pinus brutia), was preserved for a length of almost 14,7 metres originally measured long, by 4,4 metres across. The ship was built by using the "shell first" ancient method, rather the opposite of today's method. Contrary to the contemporary wood boat building method where a complete skeleton of frames of the entire vessel must first be constructed, in this case, the planking from the keel and up was joined together using a mortice-and-tenon construction and then the frames were laid in, secured with an ingenious assembly of hollow cylindrical softwood inserts hosting internal copper nails passing through both frames and planks.J. Richard Steffy, The Kyrenia Ship: An Interim Report on Its Hull Construction, American Journal of Archaeology, Vol.
Unlike iron nails, the wooden pins would expand and contract with the building's frame. All of the museum's historic structures, but most clearly the second floor of the Horseshoe Barn, reflect mortise and tenon joinery. The American building trade became highly specialized: sawyers would work in teams to saw boards and planks from felled timber; carpenters would frame houses, lay floors, and build staircases; joiners focused on finer work, such as fitting joints, framing doors and windows, and preparing paneling, moldings and trim; while cabinetmakers, who employed many of the same skills as joiners, created chests-of-drawers, desks, tables, and other furniture. Planes, used to prepare surfaces, fit joints, and cut particular decorative shapes for moldings and trim, remained the most specialized tool that woodworkers used.
Some of the problems Tenon drew attention to were the lack of space, the inability to separate patients based on the type of illness (including those that were contagious), and general sanitation problems. Additionally, the secular revolution led to the nationalization of hospitals previously owned by the Catholic Church and led to a call for a hospital reform which actually pushed for the deinstitutionalization of medicine. This contributed to the state of disarray Paris hospitals soon fell into which ultimately called for the establishment of a new hospital system outlined in the law of 1794. The law of 1794 played a significant part in revolutionizing Paris Medicine because it aimed to address some of the problems facing Paris Hospitals of the time.
The question of the architectural function of the Kore of Lyons was solved by Brunilde Sismondo Ridgway in 1986; the upper part of the polos has some characteristics typical of caryatids, which Payne did not observe directly, but only through casts sent to Athens. The sculpture has a nick on the upper part for a tenon, supporting the theory of an architectural role. Another element supporting this conclusion is the reversal of the diagonal himation (going over the left rather than the more usual right shoulder) which is typical of mirrored pairs rather than isolated works. In addition the origin of the Ionian influence detected in the style of the work matches the near eastern origin of the caryatid as an architectural feature.
Spring became president of the New Zealand Sharemilkers' Association in 1967, president of Waikato Federated Farmers in 1972, and a director of New Zealand Dairy Group in 1973.Sir Dryden Receives Accolade Spring was chairman of ANZ National Bank from April 2007 to June 2012, having formerly served as a director of the National Bank of New Zealand Limited. Spring formerly held a number of directorships including: Nufarm Ltd; Maersk NZ Ltd; Affco Ltd; Fletcher Building Ltd; Sky City Entertainment Group Ltd; Port of Tauranga Ltd; and Northport Ltd. He was deputy chairman of Goodman Fielder Ltd; chairman of Ericcson NZ Ltd; chairman of Tenon Ltd; deputy chairman of Ports Of Auckland Ltd; and deputy chairman of the Rural Banking and Finance Corporation of New Zealand.
However, E. scansoria is not a true placental mammal as it lacks some features that are specific to placentals. These include the presence of a malleolus at the bottom of the fibula, the smaller of the two shin bones, a complete mortise and tenon upper ankle joint, where the rearmost bones of the foot fit into a socket formed by the ends of the tibia and fibula, and an atypical ancestral eutherian dental formula of . Eomaia had five upper and four lower incisors (much more typical for metatherians) and five premolars to three molars. Placental mammals have only up to three incisors on each top and bottom and four premolars to three molars, but the premolar/molar proportion is similar to placentals.
The side verandahs have been enclosed to expand the rooms through large archways, the northwest being enclosed with very wide cedar chamferboards. Some rooms are in the process of restoration and show different layers of the building's fabric, including pit sawn framing with mortice and tenon joints and hand-finished lining boards. Decorative features include painted woodgrain in the hall, hand painted wall paper, pressed metal ceilings in the drawing room, carved timber fireplace surrounds, casement windows, some of which have coloured glass inserts, step out bays and pressed metal window hoods. The attached guest house (a 1903-1904 extension) has a projecting gable porch to the northeast with decorative timber arch brackets, barge board, finial and diagonally boarded gable.
The most remarkable Neolithic structure in Western Europe is the iconic megalith known as Stonehenge, regarded by some archaeologists as displaying methods of timber construction such as at woodhenge translated into stone,Atkinson, Richard, Stonehenge Penguin Books 1956 a process known as petrification. The now ruinous remains are of post and lintel construction and include massive sandstone lintels which were located on supporting uprights by means of mortise and tenon joints; the lintels themselves being end-jointed by the use of tongue and groove joints.A paper showing the joints used at Stonehenge There is also evidence of prefabrication of the stonework; the symmetrical geometric arrays of stone clearly indicate that the builders of Stonehenge had mastered sophisticated surveying methods.Johnson, Anthony, Solving Stonehenge: The New Key to an Ancient Enigma.
This house is on the property at Maple Springs, but it is not within the boundary of the National Register listing Maple Springs is a historic home and farm located at Jeffersonton, Culpeper County, Virginia. It was built in three sections. The first section is of heavy mortise-and-tenon frame construction; section two is of planked log construction, and appears to have been built about 1775 and joined together to form a hall-parlor-plan dwelling in the mid-1800s; and section three is of lighter and cruder frame construction, was originally a detached or semi-detached unit that was joined to the house around 1900 to serve as a kitchen. It features large fieldstone chimneys on the first and second section gable ends, one with a brick stack.
The Casebook of Forensic Detection p. 181 According to Mahon, for "several hours", he unsuccessfully attempted to revive Kaye before opting to dismember her body with a blunt knife already present at the bungalow.The Casebook of Forensic Detection p. 182 He then claimed to have purchased the chef's knife and tenon saw in London before returning to Officer's House where, on 20 April, he had begun to dismember and dispose of Kaye's body. Mahon claimed to have ultimately decided to dispose of the dissected portions by discarding them through the windows of railway carriages, and had successfully disposed of some sections Kaye's legs in this manner on 1 May. He had intended to dispose of the contents of his gladstone bag in the same manner when arrested at Waterloo station that morning.
When reaming a pre- bored straight-sided hole, the spoon bit is inserted into the hole and rotated in a clockwise direction with a carpenters' brace until the desired taper is achieved. When boring into solid wood, the bit should be started in the vertical position; after a "dish" has been created and the bit has begun to "bite" into the wood, the angle of boring can be changed by tilting the brace a bit out of the vertical. Holes can be drilled precisely, cleanly and quickly in any wood, at any angle of incidence, with total control of direction and the ability to change that direction at will. Parallel spoon bits are used primarily for boring holes in the seat of a Windsor chair to take the back spindles, or similar round-tenon work when assembling furniture frames in green woodworking work.
The architect Li Jie (1065–1110), who published the Yingzao Fashi ('Treatise on Architectural Methods') in 1103, greatly expanded upon the works of Yu Hao and compiled the standard building codes used by the central government agencies and by craftsmen throughout the empire. He addressed the standard methods of construction, design, and applications of moats and fortifications, stonework, greater woodwork, lesser woodwork, wood-carving, turning and drilling, sawing, bamboo work, tiling, wall building, painting and decoration, brickwork, glazed tile making, and provided proportions for mortar formulas in masonry. In his book, Li provided detailed and vivid illustrations of architectural components and cross-sections of buildings. These illustrations displayed various applications of corbel brackets, cantilever arms, mortise and tenon work of tie beams and cross beams, and diagrams showing the various building types of halls in graded sizes.
Unlike European- derived styles, table designs based on this style will nearly always contain a frame-in-panel top, the panel serving as the tabletop center and the frame sometimes also serving as what would be rails on a European table. Cabinets in this style have a top that does not protrude beyond the sides or front. The critical element in almost all pieces of this type is the mitered joints, especially the 3-way mitered joining of the leg and two horizontal pieces at each corner. The Yoke and Rack construction differs critically in the way that the legs of the piece are joined to the horizontal portion (be it tabletop, seat or cabinet carcass) using a type of wedged mortise-and-tenon joint where the end grain of the leg is visible as a circle in the frame of the tabletop.
Depictions of upward- pointing beaks in the 4th-century Vatican Vergil manuscript may well illustrate that the ram had already been replaced by a spur in late Roman galleys. One possibility is that the change occurred because of the gradual evolution of the ancient shell-first mortise and tenon hull construction method, against which rams had been designed, into the skeleton-first method, which produced a stronger and more flexible hull, less susceptible to ram attacks. Certainly by the early 7th century, the ram's original function had been forgotten, if we judge by Isidore of Seville's comments that they were used to protect against collision with underwater rocks. As for the lateen sail, various authors have in the past suggested that it was introduced into the Mediterranean by the Arabs, possibly with an ultimate origin in India.
The Pastoral pipes gradually evolved into the union pipes as baroque musical tastes favoured a more expressive type of instrument. The foot joint may have fallen out of use as early as the 1746–1770s as oboists of the period, who usually played pastoral pipes, would frequently removed or invert the foot joint in order to remove the low C# foot joint to play the chanter upon the knee. The fall from grace of the open chanter was slow to take effect as pastoral pipes with removable foot joints were still being made till the 1850sAD Fraser, ‘The Bagpipe’, Wm J Hay (1907) p 144 and played until after the First World War. In time the instrument would be tuned for performance on the knee rather than off it, and the foot joint remnant today is the tenon cut around the foot of the modern uilleann chanter.
The neck, like the first Esquires manufactured in 1950, was made from a single piece of maple without a truss rod. The neck was attached to the body with four screws and an anchor plate, unlike in traditional guitar construction, where a tenon on the neck is glued into the body. Unlike the Esquire, the neck was wider at the nut, and the head had 3 tuners on each side. The prototype differed from the later production guitars in several other respects: the body was made of pinewood, it was painted opaque white, its pickguard did not extend above the strings, it lacked a selector switch, and its volume and tone knobs were mounted on a slanted plate.. Like the production models, it had a removable pickup cover, but unlike the production models, the cover had straight sides.. The prototype had only one pickup, as did Esquires manufactured from 1951 onwards.
Bronze 4th-century BC buffer-type torc from France The Dying Gaul, a Roman statue with a torc in the Capitoline Museums in Rome A torc, also spelled torq or torque, is a large rigid or stiff neck ring in metal, made either as a single piece or from strands twisted together. The great majority are open at the front, although some had hook and ring closures and a few had mortice and tenon locking catches to close them. Many seem designed for near-permanent wear and would have been difficult to remove. Torcs are found in the Scythian, Illyrian,The Illyrians by J. J. Wilkes, 1992, , page 223, "Illyrian chiefs wore heavy bronze torques" Thracian, Celtic, and other cultures of the European Iron Age from around the 8th century BC to the 3rd century AD. For the Iron Age Celts, the gold torc seems to have been a key object.
In their opening statement on behalf of the Crown, Henry Curtis-Bennett outlined the prosecution's case against the accused, alleging Mahon had embarked on an affair with Kaye for the sole purpose of robbing her of her savings, adding records to be introduced into evidence would reveal Mahon had received four separate payments of £100 from Kaye in the months before her murder, and that he had cashed at least three of these payments under the alias of Derek Patterson. The prosecution further stated Kaye's murder had clearly been premeditated as, contrary to Mahon's claims, testimony and evidence would be introduced proving he had encouraged Kaye to state to acquaintances she and "Derek Patterson" would soon emigrate to South Africa, and that he had purchased the chef's knife and tenon saw used to dismember Kaye's body on 12 April, contrary to his claims to police he had bought the items after her death, on 17 April.
Early Egyptians also knew how to fasten the planks of this ship together with mortise and tenon joints. Seagoing ship from Hateshepsut's Deir el-Bahari temple relief of a Punt ExpeditionLarge seagoing ships are known to have been heavily used by the Egyptians in their trade with the city states of the eastern Mediterranean, especially Byblos (on the coast of modern-day Lebanon), and in several expeditions down the Red Sea to the Land of Punt. In fact one of the earliest Egyptian words for a seagoing ship is a "Byblos Ship", which originally defined a class of Egyptian seagoing ships used on the Byblos run; however, by the end of the Old Kingdom, the term had come to include large seagoing ships, whatever their destination. In 2011, archaeologists from Italy, the United States, and Egypt excavating a dried-up lagoon known as Mersa Gawasis have unearthed traces of an ancient harbor that once launched early voyages like Hatshepsut's Punt expedition onto the open ocean.
However, some players, technicians, and engineers prefer one-piece sopranos over a detachable neck because the neck receiver/tenon system is prone to excessive wear and can develop leaks over time which hinder the instrument's playability if not corrected, so due to some players' preference for curved necks, occasionally one-piece instruments are bent during manufacturing above the octave key (e.g. the Yamaha YSS-62R and YSS-82ZR). Some manufacturers also produce fully curved sopranos which look much like a small alto saxophone with a straighter neck/crook, as well as 'tipped-bell' sopranos which are straight but have the bell angled upward somewhat and are typically used with a curved neck (these are often called 'saxellos' for their resemblance to the somewhat rare Saxello model produced by King in the 1920s, though an actual Saxello's bell is angled more and its bore is different). All variants have the same keys and range as the traditional straight soprano, but as with the necks, some players believe curved and tipped-bell sopranos sound warmer and less nasal.
The lowest longitudinal member, at the point of the V-section, was approximately parallel to the ground when at rest, so that the two upper members sloped gradually from front to rear. To avoid weakening the frame by mortise and tenon joints between the longitudinal members and the struts, the latter abutted against the former and were held in place by right-angled steel brackets, which were bound to the wooden members by strips of Irish linen tape soaked in glue, the glue still being wet when the tape was bound, setting in situ. The corners of the angle brackets were indented at the apex to provide room for a steel pin and also provided with a horizontal slot across the corner, so that a bracing wire could pass through the slot and around the pin, enabling a simple, secure and easily replaceable mounting for the bracing wires which kept the frame in shape. Each of the corners of each triangular set of struts was braced to the diagonally opposite corner of the adjacent set.
In 1883 Alexander Ballantyne and Albert Henry Payson, working for the United States Lighthouse Board designed a wharf, stone-cutter's shed, mess hall and housing adjacent to the Humboldt Harbor Lighthouse to prepare and dress hundreds of 2.5 ton granite boulders transported from the Mad River Quarry on railroad flatbed cars transported on barges across the bay. After the stones were cut precisely to full scale templates with a mortise and tenon such that each would fit only one adjacent block precisely, they were wrapped in rope netting, loaded on a narrow gauge railway by steam-driven crane and moved to the wharf from which they were loaded by another steam crane to specially fitted steamer ships to be taken to form the foundation of the St. George Reef Light, on the site of the fatal Brother Jonathan wreck offshore Crescent City, California. It cost $117,000 to quarry and ship, operate the facility and pay the help in 1884, a figure which was higher than expected due to the non-stop rain. The quarry operated from 1884 to 1891, commanded by Chief Payson from 1887 after whom the settlement was named.
The vertebral column consists of an atlas (composed of two vertebrae) without ribs; numerous precaudal vertebrae, all of which, except the first or first three, bear long, movable, curved ribs with a small posterior tubercle at the base, the last of these ribs sometimes forked; two to ten so-called lumbar vertebrae without ribs, but with bifurcate transverse processes (lymphapophyses) enclosing the lymphatic vessels; and a number of ribless caudal vertebrae with simple transverse processes. When bifid, the ribs or transverse processes have the branches regularly superposed. The centra have the usual ball and socket joint, with the nearly hemispherical or transversely elliptic condyle at the back (procoelous vertebrae), while the neural arch is provided with additional articular surfaces in the form of pre- and post- zygapophyses, broad, flattened, and overlapping, and of a pair of anterior wedge-shaped processes called zygosphene, fitting into a pair of corresponding concavities, zygantrum, just below the base of the neural spine. Thus the vertebrae of snakes articulate with each other by eight joints in addition to the cup-and-ball on the centrum, and interlock by parts reciprocally receiving and entering one another, like the mortise and tenon jointery.
The second owner, who ultimately lived on the property, bought it in 1847 and held it for forty-seven years until 1894. Most of the phase 2 and subsequent construction probably occurred during this period. During this timeframe, balloon framing was a popular and inexpensive technique for many farm houses in the 19th century. Requiring no specialized skills, it utilized long continuous framing members (studs) that ran from sill plate to eave line with intermediate floor structures nailed to them, with the heights of window sills, headers and next floor height marked out on the studs. Surprisingly, balloon framing was not used on the c1850 addition, but rather a more complex method of mortise and tenon joinery that typically requires highly skilled workmen. The foyer, room 2, gable roof, and the attic were built to the right of room 1. The room 1 ceiling height of 8 feet was used throughout the addition. Framing - The vertical posts on the north and south side for room 2 and the foyer, built on an irregular beam base, were extended in length above the interior room ceiling to the top attic rail. The length was designed to match the height of the original room 1 roof.

No results under this filter, show 314 sentences.

Copyright © 2024 RandomSentenceGen.com All rights reserved.