Sentences Generator
And
Your saved sentences

No sentences have been saved yet

"gas burner" Definitions
  1. a nozzle or a set of openings through which combustible gas escapes and burns

90 Sentences With "gas burner"

How to use gas burner in a sentence? Find typical usage patterns (collocations)/phrases/context for "gas burner" and check conjugation/comparative form for "gas burner". Mastering all the usages of "gas burner" from sentence examples published by news publications.

On the gas burner is an hourglass-shaped pot for cooking sticky rice.
Gary lights a gas burner and puts a cast iron pan on the flame.
"The bag has my daughter's diapers, a portable radio and a gas burner," Lee said.
If you've got a gas burner, you'll be able to get a little char on them.
They undressed him, put him inside, turned on the gas burner, and left it there all night.
Cook the garlic and onions over a gas burner or grill until charred all over, 13 minutes.
Until then, he said he plans to cook with a small gas burner set up under a covered porch.
Ms. Ewy pointed to the gas burner and large pots she uses to heat water for bathing and cooking.
Pizzacraft's oven uses the gas burner on your stove to cook personal-sized pizzas to perfection in just six minutes.
Put a gas burner on low so the flame doesn't go outside of the pot's base and burn the handle.
The kitchen in this apartment has less than a foot of counter space and I've got one gas burner, no oven, and no microwave.
But since they actually camp in inclement weather, they also have to deal with wind blowing out the feeble flame of an ordinary gas burner.
The one-room business has three cold cases, a sink, an oven, and a gas burner, on which milk is bubbling in a giant aluminum bowl.
A single light bulb illuminated the other contents of the bare, musty room: two plastic chairs piled with clothes, canned fruit and vegetables, and a single gas burner.
Cooking a stir-fry on a gas burner rather than on an electric hot plate produced much higher emissions over all, primarily because of the additional products of combustion.
Another product of the marriage of bleach-based mopping and gas-burner ignition is nitryl chloride, a compound that is known to atmospheric chemists for its role in coastal smog formation.
Back on the island, one of the men lit a gas burner under a pan and used his bare hand to stir a splash of kerosene into white beads of solid ammonium nitrate.
Meanwhile, place the TK eggplant directly over the flame of a gas burner and cook, turning occasionally, until charred and soft in some places, but harder in others, about 5 to 6 minutes.
At Aoyama Zero recently, a large pot of tonjiru (pork miso broth) brewed on a portable gas burner all night to be dished out alongside a plate of homemade salted onigiri sometime around dawn.
It's really just another form of additive manufacturing, and it gave the students "a huge amount of design freedom…with metal casting, for instance, we could never achieve channels that are as thin as the ones inside our gas burner," Ferchow said.
To start the process, the vaporisation surface had to be warmed to its operating temperature by a gas burner (this would be done electrically in an operational model), but once the system was up and running, vaporisation and combustion became self sustaining.
The banality of the activities was belied by the precision with which the team carried them out: a rigid protocol dictated when each gas burner could be lit, how hot the frying pan should be, and at what setting to toast the bread.
A physicist at the University of California San Diego found an open pan on a gas burner was worst, and an electric kettle best, as long as you don't overfill it and switch it off as soon as you hear it boil.
The ignition source is defined as a gas burner with a blue, non-luminous flame 4-5 cm in height.
Gas-fired convection heaters use a gas supply instead of electricity. These heaters consist of a gas burner, an air filter, gas valves, a blower, and a thermostat.
A third order revolving optic, on a mercury trough with DA (dissolved acetylene) gas burner and gas motor to revolve the optic, all supplied by M/s BBT, Paris were installed inside the lantern house over the CI tower . The light was commissioned on 14 April 1969. Due to frequent failures of the rotation system, the revolving optic assembly was removed and a cut-and-polished drum optic was placed in position in 1978. The DA gas burner was replaced by a DA gas flasher with a sun valve.
The company also produces sensor technology and ignition systems for the oil and gas burner industry. Almost all OE- manufacturers of automobiles, commercial vehicles and engines are BERU's customers. The company's headquarters are located in Ludwigsburg, Germany. BERU has been acquired by BorgWarner.
These burned lignite coal. The Eastern Montana Light and Power Company took over the plant in 1920. It was bought in 1926 by the Minnesota Northern Power Company, which installed a 2,000-KW Allis Chalmers generator with a Webster gas burner. With .
AS 4553-2000 (AG 103-2000) Gas space heating appliances The New South Wales government, through the Public Works Department, also re-evaluated alternative methods of heating classrooms, to ensure a safe and healthy environment for students. It was in this context, that John Joyce's company Bowin Technology embarked on a major research & development program aimed at minimising nitrogen dioxide emissions from unflued gas heaters. Bowin Technology set itself the task of solving the emission problem at its source: the gas burner. This was despite a generally long held belief by gas experts, that commercially warranted gas burner improvements could not deliver drastic nitrogen oxides (NOx) reductions.
4: Bowl. 5: Gas burner A heated bath is used in the laboratory to allow a chemical reaction to occur at an elevated temperature. The heated bath is a fluid placed in an open (metal) pot. Water and silicone oil are the most commonly used fluids.
Induction cooking provides fast heating, improved thermal efficiency, and more consistent heating than cooking by thermal conduction. The induction elements commonly have heating performance more comparable to a commercial gas burner, but are significantly more energy-efficient. Generally, the higher the power input, the faster the cooking time.
Regeneration is normally carried out by the use of a heating coil, such as a water or steam coil, or a direct-fired gas burner. Thermal wheels and desiccant wheels are often used in series configuration to provide the required dehumidification as well as recovering the heat from the regeneration cycle.
The lighthouse is currently painted white with a red dome. In January 1918 the lighthouse was the only structure on the island and the only aid to navigation to survive the 1918 Mackay cyclone. The lighthouse was automated around 1920. In 1991, the light source was still an open flame acetylene gas burner.
A Bunsen burner, named after Robert Bunsen, is a kind of gas burner used as laboratory equipment; it produces a single open gas flame, and is used for heating, sterilization, and combustion. The gas can be natural gas (which is mainly methane) or a liquefied petroleum gas, such as propane, butane, or a mixture.
During this time the company won a contract to supply gas- heating systems to government schools in Australia with a gas burner designed to reduce emission and improve air quality called the LO-NOx burner. Joyce died of a heart attack in June 2002 and is survived by his wife Pam and three sons.
An explanation made by makes sense only if the light was automated in 1920, leaving some presence, and totally demanned in 1930. The light was converted to an automatic acetylene gas burner (carbide lamp). During the 1980s the lighthouse was deactivated and replaced with a small fiberglass beacon. The beacon has NGA number 111-10030 and Admiralty number K3117.
Sporting Club de Bastia in staff (1905) Sporting Club de Bastia was founded in 1905 by a Swiss named Hans Ruesch. He taught German in high school in Bastia. The first president of Bastia was Emile Brandizi. The Corsican club celebrated its debut on the Place d'Armes of Bastia, in the light of a single gas burner.
Douglass reported that "the large gas burner was ex-focal and therefore that it was totally useless and wasted". Douglass claimed that the design of "superposed lenses" at the Eddystone Lighthouse of 1882 were his. The same design "bi-form lens" was used by Wigham in the Galley Head lighthouse in 1877. There was a public dispute.
The original light source used on clear weather was a gas burner. On bad weather an electric arc lamp was used, electricity being supplied by a de Méritens generators driven by a Crossley coal gas engine. On especially bad weather a second generator was also operated, resulting in a 6,000,000 cd light, the world's most powerful at the time.
The school on Sand Island closed in 1928. In 1921 an automatic acetylene gas burner was installed at the Sand Island light, making it the first automated lighthouse in the Apostle Islands. A few years later the Sand Island lighthouse was leased to summer resident Gert Wellisch. The Great Depression of the 1930s reinforced some trends and altered others.
The brustolina is common in kitchens throughout Italy. This grill ("graticola") is used for more than just toasting bread ("tostapane"). On the stove, the brustolina diffuses heat evenly to quickly heat slices of bread, to crisp bread for bruschetta, to crisp slices of polenta, to roast peppers, and more. A brustolina is a grill which fits over a gas burner on a hob.
Kettle whistleA gas burner; this type, without a lid, is filled through the spout. A modern stovetop kettle is a metal vessel, with a flat bottom, used to heat water on a stovetop or hob. They usually have a handle on top, a spout, and a lid. Some also have a steam whistle that indicates when the water has reached boiling point.
Herschberger had attached a rubber hose to a laundry gas burner and had inhaled illuminating gas. His death at age 60 was a suicide arising from his despondency over ill health. His widow attributed the act to a nervous breakdown. Herschberger retired from the real estate business after suffering a nervous breakdown four years before he died, and had suffered from heart disease.
Some burners are operated to produce carbon black. The gas burner has many applications such as soldering, brazing, and welding, the latter using oxygen instead of air for producing a hotter flame, which is required for melting steel. Chemistry laboratories use natural-gas fueled Bunsen burners. In domestic and commercial settings gas burners are commonly used in gas stoves and cooktops.
The Hot Particulate Ingestion Rig (HPIR) is a gas burner that can shoot sand into a hot gas flow and onto a target material to test how that material's thermal barrier coating is impacted by the molten sand. It was developed by the U.S. Army Research Laboratory (ARL) to experiment with new coating materials for gas turbine engines used in military aircraft.
The bottom part was adapted to hold a gas burner, a high pressure oil or an ordinary wood or coal fire. Superior models could have a drawing-off tap, and a steam-escape pipe that lead into the flue. An invoice for a free-standing Kesselofen It was used for domestic laundry. Linen and cotton were placed in the copper and were boiled to whiten them.
Further station facilities came in 1937 with the completion of the Storstrøm Bridge. The red brick station building has now been partly converted into residential accommodation. Orehoved Lighthouse was built in 1895 on the northwest corner of the quay, replacing an earlier light which had simply been placed on a mast at the end of the railway pier. A blue gas burner was installed in 1912.
Modulating gas burner firing into tubular heat exchanger. Introducing heat into the working chamber can be done in a variety of ways. For most autoclaves, and particularly those used to process composite parts or perform adhesive bonding of metal structures, the easiest and least costly initially is electric heat. Resistance heaters are compact and reliable and can be placed conveniently in the circulating air duct.
The light was deactivated in the early 1950s. St. Philip's Episcopal Church The rear range light was a white lantern in the steeple of St. Philip's Church in Charleston that was lit in 1893. The height of the lantern was . The Annual Report of the Light-House Board reported that the electric apparatus for lighting the gas burner in the locomotive headlight was repaired in 1901.
A single-ended recuperative (SER) burner is a type of gas burner used in high- temperature industrial kilns and furnaces. These burners are used where indirect heating is required, e.g. where the products of combustion are not allowed to combine with the atmosphere of the furnace. The typical design is a tubular (pipe) shape with convoluted pathways on the interior, closed on the end pointed into the furnace.
This process was the main process used in Britain from the mid-19th century until 1951.. The process was very inefficient as it was designed as a small scale batch operation. Each retort only produced so companies would put them together in banks and used one large gas burner to heat all of them.. The Belgian process requires redistillation to remove impurities of lead, cadmium, iron, copper, and arsenic.
Eventually, evidence was discovered by chance. In 2008, one of the villagers from Alexandrovskoye found an AK-47 assault rifle with a homemade silencer wrapped in a bathrobe in the forest. During a walk around the repair shops, one of the local locksmiths identified the silencer and said that it was ordered by Taran, who needed it for a nozzle for a gas burner. Soon after, he was arrested.
The design included a double envelope; the internal layer black polyester, while the outer was transparent. He hired Cameron Balloons in Bristol to build solar balloon G-BAVU. The solar balloon's envelopes worked in tandem: transparent surface allowed air to flow in, enabling a greenhouse effect and absorbed the trapped solar radiation from the black envelope. The twin envelopes were attached to a basket carrying a gas burner.
Orehoved Lighthouse is a lighthouse in Orehoved on the north coast of Falster, Denmark. It was built in 1895 on the northwest corner of the quay, replacing an earlier light which had simply been placed on a mast at the end of the railway pier. A blue gas burner was installed in 1912. In 1933, a third storey was added to the tower, bringing it up to a height of .
To the mixture in the agitation tank, there is added 3/10 percent Johns-Manville # 503 Filter Aid. The temperature is maintained at . by means of a ring gas burner, at the bottom of the tank. At this temperature the wax is supplied by a Worthington pump at 30 lbs to a one square foot Shriver press whose head and follower are steam jacketed and which has 7 sections.
Although most modern gas stoves have electronic ignition, many households have gas cooking ranges and ovens that need to be lit with a flame. Electric ignition stoves use electric sparks to ignite the surface burners. This is the "clicking sound" audible just before the burner actually lights. The sparks are initiated by turning the gas burner knob to a position typically labeled "LITE" or by pressing the 'ignition' button.
The original optical apparatus was a 4th order fixed lens with kerosene wick burner. In 1930 the light was converted to an open flame acetylene gas burner, with sun valve and flasher, which operated at least until 1975. By 1977 the original lens had been removed and a solar powered Tideland ML-300 electric beacon installed. A pilot station was established on the foreshore nearby in 1919 and was closed in 1963.
A diagram of a propane smoker, loaded with country style ribs and pork loin in foil. A propane smoker is designed to allow the smoking of meat in a somewhat more temperature controlled environment. The primary differences are the sources of heat and of the smoke. In a propane smoker, the heat is generated by a gas burner directly under a steel or iron box containing the wood or charcoal that provides the smoke.
Although this presents some design limitations, it is simpler than using synthetic heat transfer fluids, and of somewhat lower cost. The gas burner assembly is fitted to the far end or the side of the vessel and fires into a heat exchanger inside the air duct. The hot end of the replaceable tube is covered with turbulators for better heat transfer. This recovers the greatest part of the energy of the flue gas.
In Latvia, moonshine "kandža" (45–55% vol) is generally made from sugar, sometimes from potatoes or also grains. The brewing kettle commonly is an old aluminum milk-can (approximately 40l). Normally sugar, baker's yeast and water is fermented for few weeks and then distilled with help of gas-burner or wood-cooker. Brewing of "kandža" is illegal; however, in reality as long as it is used for own consumption (not for sale) there are no problems with authorities.
The Termosolar Borges plant implements a different approach: the hybridization of a CSP plant with biomass fueled boilers. There is also a natural gas burner, to be used as an emergency backup. This solution reaches a higher electric production, an improvement in the operation stability of the thermal system and a higher renewable output of the plant. Beside, the most solar projects and plants are developed in the southern Spain territory, in consideration of more daily energy and a better winter insolation.
The Teclu burner is a laboratory gas burner, a variant of the Bunsen burner, named after the Romanian chemist Nicolae Teclu. It can produce a hotter flame than a Bunsen burner. The lower part of its tube is conical, with a round screw nut below its base. The gap, set by the distance between the nut and the end of the tube, regulates the influx of the air in a way similar to the open slots of the Bunsen burner.
Sometimes the canes are formed into a sort of upright tuft shaped like a mushroom that is encased in the dome. The year of manufacture is sometimes enclosed in one of the canes. Lampwork paperweights have objects such as flowers, fruit, butterflies or animals constructed by shaping and working bits of colored glass with a gas burner or torch and assembling them into attractive compositions, which are then incorporated into the dome. This is a form particularly favored by studio artists.
On the final day of the festival, after three days of air drying and seven hours of drying with a gas burner, the ceramic sculpture was burned. This spectacle became even more impressive due to the fact that the sculpture exploded and “the birds flew from the singing tree”. Perhaps because the 60-kilogram sculpture was not dry enough due to weather conditions. the festival participants and local residents celebrated the experience gained with champagne and homemade panna cotta with wild berries.
As of 2010, Fenwal Controls, a gas equipment manufacturer based in Boston, was the contractor responsible for maintaining the flame."Eternal Flame Thanks Fenwal Controls," Product Design & Development, January 11, 2010. The eternal flame's original, custom-manufactured ignition system was contained in a weather-proof box buried a few feet from the grave site. The system controlled the flow of gas and oxygen to the flame and kept it lit via a high-voltage cable and 20,000-volt spark ignition electrode near the gas burner.
The Shvab–Zeldovich formulation is an approach to remove the chemical-source terms from the conservation equations for energy and chemical species by linear combinations of independent variables, when the conservation equations are expressed in a common form. Expressing conservation equations in common form often limits the range of applicability of the formulation. The method was first introduced by V. A. Shvab in 1948Shvab, V. A. (1948). Relation between the temperature and velocity fields of the flame of a gas burner. Gos. Energ. Izd.
From this work, the reciprocity law of Bunsen and Roscoe originated. He discontinued his work with Roscoe in 1859 and joined Gustav Kirchhoff to study emission spectra of heated elements, a research area called spectrum analysis. For this work, Bunsen and his laboratory assistant, Peter Desaga, had perfected a special gas burner by 1855, which was influenced by earlier models. The newer design of Bunsen and Desaga, which provided a very hot and clean flame, is now called simply the "Bunsen burner", a common laboratory equipment.
The idea of a cauldron lighting ceremony that combined fire and water was conceived by Ric Birch, Director of Ceremonies for the opening ceremony. The cauldron itself was designed by Michael Scott-Mitchell. The structural design of cauldron, mast and transport components was largely undertaken by Tierney and Partners with the assistance of LUSAS Civil and Structural. Its construction involved two years of planning, design and rigorous implementation by a team of design engineers, manufacturers and suppliers covering structural, mechanical, electrical and hydraulic engineering, gas-burner technology and computer control.
Various ingredients in a donabe Donabe (Japanese: 土鍋, literally "earthenware pot") are pots made out of a special clay for use over an open flame in Japanese cuisine, and in the case of semi-stoneware Banko ware of high petalite content. Often, the food is cooked at the table on a gas burner for various nabemono dishes such as shabu-shabu and dishes served simmering including nabeyaki udon. They are sized by sun, one of the Japanese units of measurement. The donabe is usually glazed on the inside and porous on the outside.
Public transport is limited to one bus, Compass Travel route 100, that runs to Pulborough railway station on the Bognor Regis to London Victoria line. In the 1980s, oil was discovered beneath a large part of Cootham and a small pumping station was constructed at the corner of the gliding field. This is still operational and features two 'nodding donkey' pumps and a gas burner. Much of the area surrounding Cootham is protected from development, though housing has encroached significantly since the late 1980s and there is now little untouched land between Cootham and Storrington.
It was only in 1927 the lighthouse was finally automated, the light source was changed to an acetylene gas burner, and the station was demanned. The keeper's house and signal staff were destroyed about that time. Front entrance of the radar shack and imitation lighthouse keeper's cottage During World War II, from early 1942 to February 1945, a radar station was operated by the 56 Radar Unit, RAAF near the lighthouse. An imitation lighthouse keeper's cottage was constructed for camouflage purposes, and the defensive installations surrounded the station.
No longer constantly sparking to keep the flame lit, the system monitored the flame and activated the ignition system only when the flame was extinguished. The electrode was specially designed for outdoor use. Oversight of the flame's maintenance was provided by the Army Corps of Engineers, which contracted with Fenwal Controls to ensure the eternal flame was maintained and upgraded as needed. According to Arlington National Cemetery historian Tom Sherlock, when the gas burner required maintenance the flame was shut off.Sherlock, "Arlington National Cemetery," Washington Post, May 23, 2001.
Indian Chinese food is readily available in major metropolitan areas of India such as Bhopal, Surat, Vadodara, Rajkot, Mumbai, Pune, Chennai, Kochi, Guwahati, Hyderabad, Delhi, Lucknow, Kolkata and Bangalore. It is also available in a number of towns and at dhabas (roadside stalls), also popularly referred to as "Fast food", adjacent to major Indian roads and highways. Many restaurants have a Chinese section in their menus, and some are even dedicated to serving Indian Chinese food. It can also be found in mobile kitchen carts (lari or rekdi) that ply the streets of cities, prepared in woks over a portable gas burner.
Believing the rumor, local fish and chip shop owner Rhys Edwards (Anthony O'Donnell) comes to Milo and asks him to "bake a cake" for his domineering wife Martha (Annette Badland), Milo completely missing the intended subtext. The next day, Rhys unknowingly leaves a gas burner open and unlit before he leaves for work, and Martha is killed by the ensuing explosion when she goes to use the toaster. Gwynfyd's residents assume Milo was responsible, proving the rumors true in their minds. Over the next weeks Milo's business picks up considerably, with several people ordering "cakes" for others in town.
Thermopiles are used to provide an output in response to temperature as part of a temperature measuring device, such as the infrared thermometers widely used by medical professionals to measure body temperature, or in thermal accelerometers to measure the temperature profile inside the sealed cavity of the sensor. They are also used widely in heat flux sensors and pyrheliometers and gas burner safety controls. The output of a thermopile is usually in the range of tens or hundreds of millivolts. As well as increasing the signal level, the device may be used to provide spatial temperature averaging.
Jose Andres with Richard Wolffe, Tapas: A Taste of Spain in America (Clarkson Potter, 2005), p. 93. The dish can be grilled outdoors on a grate until charred and soft or may be cooked whole directly on glowing coals and then peeled. Indoors, the eggplant may be charred on a gas burner and the rest of the vegetables may be broiled. The dish may be served as tapas, as a relish for grilled meats or fish such as tuna,Sid Goldstein, The Wine Lover Cooks with Wine: Great Recipes for the Essential Ingredient (Chronicle Books, 2004), p.
While Hurstwood drifts further and further into poverty and ends up living on the streets, Carrie's star in the theatre rises until she is a well-regarded actress on the cusp of fame. Hurstwood, entirely starved, visits her at the theatre stage door, and she wants to take him back. She had found out from Drouet that Hurstwood had taken the money to start a life with her and blames herself for his predicament. She wants to make it up to Hurstwood but he won't take more than a quarter and disappears after toying with the gas burner in her dressing room.
Lucy began to question her mother on why she is mad towards Beth until she tells her that she learned that Beth, a trusted friend, has an affair with her husband Norman (Lloyd Samartino) and tells her to stay away from Shane. Afterwards, the ghosts began tormenting Lucy & Shane to break their friendship. At school, the girls began to quarrel each other over their families. After the ghosts torments the girls, their tensions grew further when Shane had her hand burned with a gas burner during chemistry class and Lucy mysteriously curses a girl who had been bullying her.
Propane burner used with forced air into a metal melting furnace. Propane burner with a Bunsen flame Oxy-Acetylene for cutting through steel rails Flame of a gas and oil, in a dual burner A gas burner is a device that produces a controlled flame by mixing a fuel gas such as acetylene, natural gas, or propane with an oxidizer such as the ambient air or supplied oxygen, and allowing for ignition and combustion. The flame is generally used for the heat, infrared radiation, or visible light it produces. Some burners, such as gas flares, dispose of unwanted or uncontainable flammable gases.
114-119 Each room will have an outlet from the duct system, often mounted in the floor or low on the wall - some rooms will also have an opening into the cold air return duct. Depending on the age of the system, forced air gas furnaces use either a pilot light or a solid state ignition system (spark or hot surface ignition) to light the natural gas burner. The natural gas is fed to buildings from a main gas line. The duct work supplying the hot air (and sometimes cool air if an AC unit is tied into the system) may be insulated.
The furnace is then tilted forward so that the lance is above the charge, and the charge is melted using an oil or natural gas burner that is inserted near the top of the furnace. Once the charge has been melted, the furnace is tilted back into the blowing position and oxygen is blown into the bath. Slag formed from the oxidation of lead and zinc is removed periodically by tilting the furnace forward again and pouring it off. The oxygen flow rate during blowing for a three tonne capacity furnace is 20–30 Nm3/h.
7–11 Carte explained why he had introduced electric light: "The greatest drawbacks to the enjoyment of the theatrical performances are, undoubtedly, the foul air and heat which pervade all theatres. As everyone knows, each gas- burner consumes as much oxygen as many people, and causes great heat beside. The incandescent lamps consume no oxygen, and cause no perceptible heat.""Richard D'Oyly Carte" , at the Lyric Opera San Diego website, June 2009 When the electrical system was ready for full operation, in December 1881, Carte stepped on stage to demonstrate the safety of the new technology by breaking a glowing lightbulb before the audience.
Merker gas-fired water heater from the 1930s, with pilot light clearly visible through the aperture in the front cover. The large opening allowed for the manual lighting of the pilot light by a lit match or taper A pilot light is a small gas flame, usually natural gas or liquefied petroleum gas, which serves as an ignition source for a more powerful gas burner. Originally a pilot light was kept permanently alight, but this wastes gas. Now it is more common to light a burner electrically, but gas pilot lights are still used when a high energy ignition source is necessary, as in when lighting a large burner.
These paintings were presented at the National Exhibition of Fine Arts held in Madrid in that year and Sorolla won the Prize of Honor. Here, he presents his friend Simarro as a man of science who transmits his wisdom investigating and, in addition, it is the triumph of naturalism, as it recreates the indoor environment of the laboratory, catching the luminous atmosphere produced by the artificial reddish-yellow light of a gas burner that contrasts with the weak mauvish afternoon light that shines through the window. These paintings may be among the most outstanding world paintings of this genre.Campos Bueno, JJ, (2010) Art and Science in Sorolla’s Painting A Research in Dr. Simarro’s Lab.
A gas burner fires a flame down the center of these pathways, and the hot combustion gases are then forced to change direction and travel along the shell of the tube, heating it to incandescent temperatures and allowing efficient transfer of thermal energy to the furnace interior. Exhaust gas is collected back at the burner end where it is eventually discharged to the atmosphere. The hot exhaust can be used to pre- heat the incoming combustion air and fuel gas (recuperation) to boost efficiency. Such burners compete with electrical heating and can be more economical to operate than electric heat, particularly in larger furnaces and in most areas where the price of natural gas per unit of available energy is lower than that of electricity.
At the same time, the intention to attract only female occupants allayed traditional community suspicions about the immorality of single men and women inhabiting shared residential accommodation. By insisting that Bulolo Flats were designed for women only, the stigma of "fast" or "loose" being applied to the young unmarried female occupants was removed. Although quite fashionable in Sydney and in London, flats designed especially for single women were uncommon in Queensland, and no other self-contained block for this purpose is known to have been purpose-constructed in Brisbane in the interwar period. Sometimes referred to as "bachelor flats", they were distinguished from one-bedroom flats in that the bedroom and sitting room were combined, with a small kitchenette attached (sometimes just an alcove with a sink and single gas burner).
The Kronach Lorin was a small ramjet engine, for aircraft propulsion, that was statically tested in Vienna during the later stages of World War II. It was intended to be used in the German interceptor planes Lippisch P.13a and Lippisch P.13b. It was initially proposed that a wire-mesh basket holding coal be mounted behind a nose air intake, protruding slightly into the airflow and ignited by a gas burner. Following wind-tunnel testing of the ramjet and the coal basket, modifications were incorporated to provide more efficient combustion. The coal was to take the form of of small granules instead of irregular lumps, to produce a controlled and even burn, and the basket was altered to a mesh drum revolving on a vertical axis at 60 rpm.
Out of concern about energy wasted by the standing pilot flame, designers of many newer appliances have switched to an electronically controlled pilot-less ignition, also called intermittent ignition. With no standing pilot flame, there is no risk of gas buildup should the flame go out, so these appliances do not need thermocouple- based pilot safety switches. As these designs lose the benefit of operation without a continuous source of electricity, standing pilots are still used in some appliances. The exception is later model instantaneous (aka "tankless") water heaters that use the flow of water to generate the current required to ignite the gas burner; these designs also use a thermocouple as a safety cut- off device in the event the gas fails to ignite, or if the flame is extinguished.
Most gas ranges and cooktops use sparking devices to ignite the burner flame. This eliminates the need for a pilot flame, which wastes energy. Most of these sparking device-equipped ranges require the user to control the ignition sparking manually, resulting in a three-step process required to operate the burner: #turn burner knob to a position that opens the gas valve and activates the sparking (typically labelled "Light") #wait for ignition, typically 0.5 to 2 seconds #turn burner knob past lite position, to stop the sparking noise and burning out the ignition electrode, to a desired flame intensity One implementation of a gas burner with auto reignition senses the electrical conductivity of the flame. This nonzero flame conductivity is because combustion of natural gas releases enough free electrons to support a small current in air.
Zubrin claimed in his design that the apparatus was created so that the liquid flow rate or velocity was what mattered most in the process, not the material. Therefore, he argued that if the proper velocity was chosen for the liquid traveling through the reaction chamber, the site of maximum fission release could then be located at the end of the chamber, thus allowing the system to remain intact and safe to operate. These claims have still not been proven due to no test of such a device having ever been conducted. For example, Zubrin argues that if diluted nuclear fuel flows into the chamber at speed similar to diffusion speed of thermal neutrons, then nuclear reaction is confined in the chamber and does not damage the rest of the system (it is a nuclear analog of gas burner).

No results under this filter, show 90 sentences.

Copyright © 2024 RandomSentenceGen.com All rights reserved.