200 Sentences With "extruding" | Random Sentence Generator

That's a little under two solid weeks of non-stop extruding.

It works pretty much like a 3D printer, extruding specialized plastic through a heated tip.

First, the custom-designed robotic drawing machine created the celestial illustrations by extruding beeswax onto canvas.

You can then lead the filament into the print head and wait until it starts extruding.

The structures acknowledge the impermanence of home, while extruding personal memories into a public, collective space.

The collector, who is in his 80s, accumulated his art gradually, like a snail extruding a shell.

Extruding the glass in layers makes it difficult to create a smooth, transparent object, Mr. Petch said.

Injection moulding has long been used to produce plastic parts by extruding a molten polymer into a mould.

Another 3D-printing process used by Stratasys builds parts layer by layer, by heating and extruding thermoplastic filaments.

But rhetoric is easy; extruding it into a compelling unified vision, let alone specific policies, is much harder.

Some researchers suspected that ribosomes might actually contain the recipes for proteins, extruding them as an almost autonomous process.

The industry also had 35,500 extruding and drawing machine operators, which is set to see employment fall by 9.9%.

It's hard to believe, but 3Doodler launched the popular Kickstarter for its first plastic-extruding pen almost three years ago.

Pressing the pen's single button once starts the plastic 3D printing filament extruding, and pressing it again stops the flow.

It only takes the 3Doodler Start about 30 to 33 seconds to warm up enough to actually start extruding filament.

In "extruding" them, did you use actual mathematical formulas to find graphical patterns, or was this more of an artistic impression?

While melting cheese creates larger spherical fat globs after the heating process, the extruding process changed the cheese's molecular structure fundamentally.

You enter, a node and a target, streamed at and pushed and yanked, penetrated by and extruding information, sloppy with it.

All around the figure encroaches the colorful pile of sculpted boucherouite (made by extruding clay through a garlic press, DiMattio notes).

This looks like 2007 and lamé headbands, when people liked knocking out counters and extruding everything in Adobe Illustrator all the time.

And in this week's issue of Science, they reported witnessing an isolated condensin molecule extruding a loop of DNA in yeast, in real time.

By extruding the wet paper he is able to create a thick bead of pulp that he can then build up to create decorative objects.

When they were extruding polypropylene, it was all different colors, and these pinks and oranges and greens would come out of the machines like hair.

Further down the line Deakin's researchers are looking into making rebars out of basalt, an abundant volcanic rock, by melting it and extruding it into fibres.

Typically, the layers are built up by extruding filaments of molten polymer, by inkjet-printing material contained in cartridges or by melting sheets of powder with a laser.

You can even grab the white extruding tip when the 3Doodler Start is all warmed up, without the risk of even the slightest discomfort—let alone a burn.

By the time the Form 1 began shipping to Kickstarter backers, the market was already flooded with countless 3D printers built around the same basic plastic extruding technology.

But if you like complicated machines that are simultaneously extruding, cutting, and sorting, you'll be more than satisfied with the high-speed process behind making two-toned plastic drinking straws.

Click here to view original GIFGIF: Gizmodo (Matt Denton)Matt Denton has been putting his 3D printer to good use again, possibly the only good use for those plastic-extruding machines.

It also squeezes the oils from the grain, so you can imagine extruding soybeans into a pasta or cereal and then using the oil to cook or flavor whatever comes out.

Those textural changes likely came from changes to the cheese's molecular structure during extruding—something we'll have to think more about if we're hoping to 3D print more foods in the future.

The custom 3D printer's nozzle is free to move in all directions as it's extruding material, and is precise enough to create conductive wires less than the width of a human hair.

The hearing, part of an investigation requested by the House of Representatives Ways and Means Committee, heard from U.S., Canadian, European and Russian groups and companies involved in smelting, extruding and recycling.

"Oftentimes I will use CAD to scale things out very quickly and draw the floor plan, and then export into Sketchup, where we start extruding walls up and adding built-ins," he said.

The Lilia chef will open a new restaurant, Misi, in Williamsburg, Brooklyn, with an open kitchen and a glassed-in room where pasta makers will be on view, mixing, rolling, extruding, twisting and filling.

Shaw himself uses a self-invented extruding gun — similar to the machines that shape long strands of dry pasta — to create wonky coils of repurposed plastic with which he sculpts stools and side tables.

The printer works in a manner similar to industrial wire-bending machines, extruding a length of thin metal which is bent in multiple places to create shapes that can be used as limbs or tools.

It had been almost two years since I'd first written about LIX, an ultra-slim 3D printing pen that worked much like traditional 3D printers, extruding PLA or ABS material through a super-heated tip.

Their home was well kept but bloomed in the corners with complex personal detritus, kindhearted art and a raucous heap of toys extruding stuffed-animal legs and the heads of dolls with food-coloring hair.

SoHo offers a bounty of food — each block in this Manhattan neighborhood seems to feature artisanal chocolatiers selling single origin cacao, juice shops extruding vegetables for $9 a bottle and stores peddling cupcakes and Cronuts.

It was a deceptively simple-looking open-sided box with a nozzle for extruding fine threads of plastic — over the course of minutes or hours, those threads would be painstakingly layered to form an object.

The demonstrator mission, Archinaut One, would launch aboard a Rocket Lab Electron launch vehicle no earlier than 2022, and after achieving a stable orbit, begin extruding a pair of beams that will eventually extend out 32 feet.

Kilauea rumbled back to life on May 3 as it began extruding lava and sulfur dioxide emissions through a series of fissures, marking the latest phase of an eruption cycle that has continued nearly nonstop for 35 years.

Click here to view original GIFGIF: Lawrence Berkeley National LabThe most common types of 3D printing involve either extruding melted plastic or using a laser to solidify tiny particles, layer by layer, to slowly build up a solid object.

Among them are a gleaming stretch of open kitchen along one side and an airy, glassed-in room for making pasta on the other, where three to five artisans will be on view, mixing, rolling, extruding, twisting and filling.

Instead of heating the mixture, extruding it like hot glue, and then letting it cool and harden, the 3D-printing technique used here instead lays down very thin layers of the regolith mixture, which are exposed to light, causing the binding agent to solidify.

The formula — which includes soy powder, gluten-free flour, carrot fiber and other ingredients — is mixed and sent through an extruding machine (picture the hair on your childhood Play-Doh toy) to create a finished product with a similar taste and texture to chicken.

Kilauea rumbled back to life on May 3 as it began extruding lava and toxic gases through a series of cracks in the ground on its eastern flank, marking the latest phase of an eruption cycle that has continued nearly nonstop for 35 years.

Cleveland Volcano, a 5,123-foot (1,730-meter) peak about 950 miles (1,500 km) southwest of Anchorage, has been extruding lava from its crater – a sign of something more serious to come in the next days or possibly weeks, according to the Alaska Volcano Observatory.

Cereals are grains and these have to be processed to be digestible, but the processing can range from just cooking, to removing the nutrient-rich germ and bran, extruding to create form and texture, and adding vitamins, minerals, fiber, colors, flavors, salt, sugars, chocolate, and marshmallows.

Kilauea, one of the world's most active volcanoes, began extruding red-hot lava and sulfuric acid fumes through newly opened fissures on the ground along its eastern flank on May 3, marking the latest phase of an eruption cycle that has continued nearly nonstop for 35 years.

Here's another video of a bear extruding a tapeworm from its behind: And another: And one more, which seems to have been cruelly filmed by chasing the bear with a vehicle: As it turns out, this is a fairly common thing toward the end of summer and fall.

NASA Wants Your Help Figuring Out How to Build Space HabitatsIf and when we send colonists to Mars and beyond, we're going to need habitats unlike any we've…Read more ReadYou've probably seen an affordable consumer-friendly 3D printer at work, melting and extruding thin lengths of plastic to build up a model.

These ultra-salty squeakers are the grumps getting things very confidently wrong in the same way, year after year; their business is extruding endless curdled assessments of kids today, the shifting of blame, and the general defense of a status quo that doesn't really work for anyone but them and their bosses.

The present invention further relates to a method of extruding a filled, unrisen, yeast bread dough.

However, one of their most important products was gutta-percha insulated electrical cable.Haigh, p. 26 Bewley was also a lead pipe maker. He had designed a machine for extruding lead pipes and on the formation of the Gutta Percha Company, he used this machine for extruding gutta-percha tubing.

Among his current projects is the podcast Extruding America, a deadpan satire in the style of Bob and Ray.

The dry process involves extruding, annealing and stretching steps. The final porosity depends on the morphology of the precursor film and the specifics of each step. The extruding step is generally carried out at a temperature higher than the melting point of the polymer resin. This is because the resins are melted to shape them into a uniaxially-oriented tubular film, called a precursor film.

However, in order to increase the production efficiency, some of manufacturers expand the backing during extruding, and then send the backing to e-beam for the cross-linking process.

The extruder pushes the dough through the dies and blades or trimmers cut the dough in the desired length. Various patents cover machinery for extruding pasta of different shapes.

Gelatinization of starches is a required step in extruding foods in order to form the desired porous appearance. This step allows enzymes to react with starch and increase starch breakdown.

Roof trusses must be welded to purlins and tied using extruding column steel reinforcements. to ensure it is fixed properly to the columns and will not fly-off during strong winds.

After cross- linking, the sheet is stretched by feeding it into a machine that heats it up, stretches it and cools it down. Because the sheet has been cross-linked, after stretching, it will want to recover to its original length when re-heated. In recent years, many manufacturers had already developed their technologies of extruding and expansion of polyolefin backing. In the past, the production process of backing was done by extruding, cross-linking and expansion.

A floating mandrel, also known as a French type, floats in slots in the dummy block and aligns itself in the die when extruding. If a solid billet is used as the feed material then it must first be pierced by the mandrel before extruding through the die. A special press is used in order to control the mandrel independently from the ram. The solid billet could also be used with a spider die, porthole die or bridge die.

Other types of cross-linked polyethylene are made by addition of peroxide during extruding (type A) or by addition of a cross-linking agent (e.g. vinylsilane) and a catalyst during extruding and then performing a post-extrusion curing. The chemical process of vulcanization is a type of cross-linking that changes rubber to the hard, durable material associated with car and bike tires. This process is often called sulfur curing; the term vulcanization comes from Vulcan, the Roman god of fire.

AddDepth is a discontinued software for extruding 2D shapes into 3D images with the option of beveled effects. MetaCreations Detailer and Painter 3D are discontinued software applications specifically for painting texture maps on 3D Models.

The flatback mud crab is sometimes parasitised by Loxothylacus panopaei, a species of parasitic barnacle that develops inside a host crab, extruding a brood sac that the crab then carries under its abdomen and treats as it would its own eggs.

On first examination there appeared to be some kind of stuffing extruding between the lid and the bottom of the youth coffin labeled 'G'. When the coffin was opened this stuffing was revealed to be five pillows.Fisher, Ian. "Pillows puzzle Egyptologists".

Compression molding, transfer molding, injection molding, forging, and foam molding have high equipment and tooling cost. Lower cost processes are machining, extruding, rotational molding, blow molding, thermoforming, and casting. A summary of each process and its cost is displayed in figure 1.

The house is considered a major transitional work for Wright as his previous designs were either square or rectangular, unlike this one, which holds (see the porches extruding toward the east and west) one of the first cruciform-pinwheel layout made by Wright.

A part consists of multiple features, and an assembly consists of multiple parts. Drawings can be made from either parts or assemblies. Example: A shaft is created by extruding a circle 100 mm. A hub is assembled to the end of the shaft.

Lead shows sufficient plasticity at room temperature, while cast iron does not possess sufficient plasticity for any forging operation even when hot. This property is of importance in forming, shaping and extruding operations on metals. Most metals are rendered plastic by heating and hence shaped hot.

Hancock's machine was an adaptation of Bewley's tube extruding machine. However, Hancock denied Bewley the right to use the machine. The dispute resulted in Hancock leaving and setting up the rival West Ham Gutta Percha Company. Hancock lost the dispute in court and his company went bankrupt.

Rhyolite lava flows in northeastern New South Wales, Australia show recumbent folds that record a history of vertical shortening and lateral extension during deposition, consistent with what one would expect from gravity spreading. This is the result of lava being displaced by new lava extruding from the vent.

The wet process consists of mixing, heating, extruding and additive removal steps. The polymer resins are first mixed with, paraffin oil, antioxidant and other additives. The mixture is heated to produce a homogenous solution. The heated solution is pushed through a sheet die to make a gel-like film.

These are captured by the polyps, by extruding mesenterial filaments and tentacles. The polyps have nematocysts which are triggered to hold their prey immobile. The prey is then transported to the mouth with the assistance of mucus and cilia. Diploria labyrinthiformis is hermaphroditic, and reproduces through broadcast spawning.

The surveyor noted the overhanging eaves and described the cottage as "an old brick house with an iron roof, with a long wing, part brick and part wood, extruding to the rear". At some date the verandahs have been enclosed. The rear of the house was modernised in the 1940s.

Reinforcing steel wire rope provides bending resistance. Slabs in prestressed concrete are usually produced in lengths of up to 200 meters. The process involves extruding wet concrete along with the prestressed steel wire rope from a moving mold. The continuous slab is then cut to required lengths by a large diamond circular saw.

Gear cutting is any machining process for creating a gear. The most common gear-cutting processes include hobbing, broaching, milling, and grinding. Such cutting operations may occur either after or instead of forming processes such as forging, extruding, investment casting, or sand casting. Gears are commonly made from metal, plastic, and wood.

The main independent parameters during extrusion cooking are feed rate, particle size of the raw material, barrel temperature, screw speed and moisture content. The extruding process can induce both protein denaturation and starch gelatinization, depending on inputs and parameters. Sometimes, a catalyst is used, for example, when producing texturised vegetable proteins (TVP).

The Demaco extruder evolved from a mechanical pasta press first built in 1914. The mechanical press was replaced by the hydraulic press shortly afterwards. The Demaco extruder with an auger screw and mixer combined the functions of mixing, kneading and extruding in one machine. Previously, these operations were done by three separate machines.

Fanning can occur in various ways including extruding and retracting the hair-pencils, wing or abdominal movement, or flight in front of the female. When the female moth becomes receptive to the male hair-penciling, she will flick her antennas rapidly in response to his pheromone cues.Lassance, J.-M., & Löfstedt, C. (2009).

35 The fish had a tall body with the dorsal fin folded along the back of the body. The mouth was relatively small, with extruding teeth. These characteristics are found in part in other early Late Cretaceous fish, such as Concavotectum moroccensis from the Kem Kem Beds of Morocco.Cavin & Forey, 2008, p.

ZModeler is capable of complex modeling and Importing. On later versions it supports important modeling functions such as extruding, or beveling. Version 1 does not support polygons other than triangles, or NURBs, or other forms of modeling other than polygonal and splines. It comes with filters to import and export meshes of other formats.

The mature Western Tent caterpillar pre-pupa is 4-5 centimeters long. The caterpillars are black, grey, or white with an orange stripe running longitudinally across the body. There are blue-white lines on each segment with dispersed setae extruding from the body. Pupae are 2-2.5 centimeters and reddish-brown to black in colour.

It does this by extruding filaments several centimetres long from its mesenteries. When these come in contact with another coral they secrete enzymes that in the course of several hours digest its soft tissues. Smaller corals may be killed by this attack while larger individuals may have the part within reach stripped back to the skeleton.

Basalt is used in construction (e.g. as building blocks or in the groundwork), making cobblestones (from columnar basalt) and in making statues. Heating and extruding basalt yields stone wool, which as potential to be an excellent thermal insulator. Carbon sequestration in basalt has been studied as a means of removing carbon dioxide, produced by human industrialization, from the atmosphere.

Newer fiber designs include extruding fiber that splits into multiple finer fibers. Most synthetic fibers are round in cross-section, but special designs can be hollow, oval, star-shaped or trilobal. The latter design provides more optically reflective properties. Synthetic textile fibers are often crimped to provide bulk in a woven, non woven or knitted structure.

Cladding is the bonding together of dissimilar metals. It is different from fusion welding or gluing as a method to fasten the metals together. Cladding is often achieved by extruding two metals through a die as well as pressing or rolling sheets together under high pressure. The United States Mint uses cladding to manufacture coins from different metals.

The simplest form of building model construction consist in extruding the footprint polygons of buildings, e.g., taken from the cadaster, by pre-compute average heights. In practice, 3D models of buildings of urban regions are generated based on capturing and analyzing 3D point clouds (e.g., sampled by terrestrial or aerial laser scanning) or by photogrammetric approaches.

In Hawaii, where cuisine is heavily influenced by Asian cultures, cellophane noodles are known locally as long rice, supposedly because the process of making the noodles involves extruding the starch through a potato ricer. They are used most often in chicken long rice, a dish of cellophane noodles in chicken broth that is often served at luaus.

Scale insects are small insects of the order Hemiptera, suborder Sternorrhyncha. Of dramatically variable appearance and extreme sexual dimorphism, they comprise the superfamily Coccoidea. Adult females typically have soft bodies and no limbs, and are concealed underneath domed scales, extruding quantities of wax for protection. Some species are hermaphroditic, with a combined ovotestis instead of separate ovaries and testes.

At first, the developers had no idea how they would actually create the physical terrain for the Ages. Eventually, they created grayscale heightmaps, extruding them to create changes in elevation. From this basic terrain, textures were painted onto a colormap which was wrapped around the landscapes. Objects such as trees were added to complete the design.

In a combination tool two or more operations such as bending and trimming will be performed simultaneously. Two or more operations such as forming, drawing, extruding, embossing may be combined on the component with various cutting operations like blanking, piercing, broaching and cut off takes place- it can perform a cutting and non cutting operations in a single tool.

ECAE is unique because significant cold work can be accomplished without reduction in the cross sectional area of the deformed workpiece. In conventional deformation processes like rolling, forging, extrusion, and drawing, strain is introduced by reduction in the cross sectional area. ECAE produces significant deformation strain without reducing the cross sectional area. This is accomplished by extruding the work piece around a corner.

As the hyphae spread, they produce several toxic compounds, the most notable of which is oxalic acid. This acid lowers the pH of the infected tissue from around the normal 5.5 to approximately 2.8, which is toxic to plant cells. The canker eventually girdles the tree, killing everything above it. Distinctive yellow tendrils (cirrhi) of conidia can be seen extruding in wet weather.

This method produces a puffed rice which is spongy in texture. Rice can also be puffed by making a rice dough, and extruding small pellets which are then rapidly heated. The moisture in the dough flash boils and puffs the rice up. A cereal such as Cap'n Crunch is extruded, cooked, cut, pressurized, puffed and dried in a continuous process.

Cheese puffs, cheese curls, cheese balls, cheesy puffs, or corn curls are a puffed corn snack, coated with a mixture of cheese or cheese-flavored powders. They are manufactured by extruding heated corn dough through a die that forms the particular shape. They may be ball-shaped, curly ("cheese curls"), straight, or irregularly shaped. Puffcorn is a similar food, without cheese flavoring.

Anyuyskiy (; Annuyskiy Vulkan) is an extinct volcano in the Anyuy Mountains, Chukotka Autonomous Okrug, Far Eastern Russia. It is formed by two systems: one is formed by long lava flows which disrupted the valley of the Monni River. Later, a volcanic cone formed, experiencing explosive activity and eventually extruding a long lava flow. The volcano erupted more than one cubic kilometre of lava.

The X Corps was raised in 1974 by Lt. General Aftab Ahmad Khan. Headquartered in Rawalpindi, it is responsible for operations in some areas of Kashmir.X Corps Before that, all formations in Kashmir were controlled directly from GHQ. As an ode to Lt. General Aftab Ahmad Khan, the insignia of the X Corps features a Rising Sun or Aftab (in Urdu) with 10 rays extruding from it.

X Corps, the Pakistan Army created an insignia for the Corps which reflected a Rising Sun (Urdu for Aftab) with ten rays extruding from it. Lieutenant- General Aftab Ahmad Khan was a retired Pakistan Army Infantry Officer, born in Batala, Gurdaspur District, British India on 22 October 1923 to the illustrious family of Khan Bahadur Mian Altaf Hussain Khan (1874–1946) and Mehndi Begum.

The 3D Printing in Zero-G Experiment will demonstrate the use of 3D printing technology in space. 3D printing works by the process of extruding streams of heated material (plastic, metal, etc.) and building a three-dimensional structure layer-upon-layer. The 3D Printing in Zero-G Experiment will test the 3D printer specifically designed for microgravity, by Made In Space, Inc., of Mountain View, California.

The aqueous phase containing transcription and/or translation components is slowly added to the oil surfactants, and the formation of w/o is facilitated by homogenizing, stirring or using hand extruding device. The emulsion quality can be determined by light microscopy and/or dynamic light scattering techniques. The emulsion is quite diverse, and greater homogenization speeds helps to produce smaller droplets with narrower size distribution.

Gold is extremely ductile. It can be drawn into a monatomic wire, and then stretched more before it breaks. Ductility is especially important in metalworking, as materials that crack, break or shatter under stress cannot be manipulated using metal-forming processes such as hammering, rolling, drawing or extruding. Malleable materials can be formed cold using stamping or pressing, whereas brittle materials may be cast or thermoformed.

Alloying elements are added to a base metal, to induce hardness, toughness, ductility, or other desired properties. Most metals and alloys can be work hardened by creating defects in their crystal structure. These defects are created during plastic deformation by hammering, bending, extruding, et cetera, and are permanent unless the metal is recrystallized. Otherwise, some alloys can also have their properties altered by heat treatment.

Regarding the physical mechanism of how a hexameric helicase unwinds DNA, two models have been proposed based on in vivo and in vitro data. In the "steric" model, the helicase tightly translocates along one strand of DNA while physically displacing the complementary strand. In the "pump" model, pairs of hexameric helicases unwind duplex DNA by either twisting it apart or extruding it through channels in the complex.

Bamboo is an alternative to plastic that is renewable and can be replenished at a fast rate. Modern clothing labeled as being made from bamboo is usually viscose rayon, a fiber made by dissolving the cellulose in the bamboo, and then extruding it to form fibres. This process removes the natural characteristics of bamboo fibre, rendering it identical to rayon from other cellulose sources.

Ynys Castell from the Beaumaris road Ynys Castell () is a small (1.6 acres at high tide) island in the Menai Strait which separates Anglesey and mainland Wales. It is an extruding piece of Precambrian schist lying to one side of the Afon Cadnant estuary. It lies between Ynys y Bîg and Ynys Gaint. There is a causeway running to the island that is covered at high tide.

Telcon cable works at Greenwich, 1865–1866 The Gutta Percha Company was founded in 1845 to exploit the new material. They initially made bottle stoppers, but soon expanded to a very wide range of products.Haigh, p. 26 In 1848, on hearing of the potential use for telegraph cables, they modified a machine for extruding gutta-percha tubing into one capable of continuously applying gutta-percha to a copper conductor.

Macaroni is an extruded hollow pasta Extruding dough for churros in Strasbourg. Extrusion is used in food processing, forcing soft mixed ingredients through an opening in a perforated plate or die designed to produce the required shape. The extruded food is then cut to a specific size by blades. The machine which forces the mix through the die is an extruder, and the mix is known as the extrudate.

Plastic Pipe lengths manufactured in Australia by Extruding HDPE material. Plastic pipe is a tubular section, or hollow cylinder, made of plastic. It is usually, but not necessarily, of circular cross-section, used mainly to convey substances which can flow—liquids and gases (fluids), slurries, powders and masses of small solids. It can also be used for structural applications; hollow pipes are far stiffer per unit weight than solid members.

Soon after, the male positions himself at the rear of the female's abdomen in a low posture to tap and lick the female genitalia. Finally, the male curls his abdomen and attempts copulation. Females can reject males by moving away, kicking, and extruding their ovipositor. Copulation lasts around 15–20 minutes, during which males transfer a few hundred, very long (1.76 mm) sperm cells in seminal fluid to the female.

Freight customers were sought after county acquisition. first was R. P. Smith & Co., a brick customer near Route 10 in Ledgewood. Service began on May 2, 1988. Within the next few years, the railroad was opened to Flanders to a plastic extruding company and ultimately to Bartley where Toys "R" Us built an almost fully automated regional distribution center of 1/2 million square feet with a footprint to expand to .

Nine species of Graptemys turtle could allow confusion in distinguishing it from other species in the same genus. A few key diagnostic features set the Alabama map turtle apart. The black stripe down the center of its back with knobs extruding from it is a diagnostic characteristic for this species that separates it from other turtle species. Adult males range from and retain most coloration and pattern from its juvenile stage.

It had sold one million copies by the end of 2013. Fish and Shawn McGrath collaborated on a puzzle game that became Fez. When McGrath left the project due to creative differences, Fish, the game's artist, pursued a platform game direction with Renaud Bédard, the game's programmer, who wrote the game's level editor and game engine from scratch. Levels were built in 3D by extruding surfaces with Photoshop-created textures.

Built later in the eighteenth century by Jonathan Sedgley and Jonathan Sedgley II, being that the growing family required a shelter for their many carriages. It sits on a granite foundation. The original structure is rectangular in form and the front façade is near symmetrical with an exterior 7' x 4' sliding track-and-wheels door. It has a gable roof and there is a brick chimney extruding from it.

Styrene was important in creating synthetic substitutes for rubber, which were of great strategic importance in World War II. It also had great commercial importance. Styron, a polystyrene, was the first of the modern plastics. It became Dow's number one product in both sales volume and earnings, during Dow's first century. In 1941, Dow company developed processes for extruding polystyrene to form foam polystyrene, also known as Styrofoam.

After mixing, the rubber charge is dropped into a chute and fed by an extruding screw into a roller die. Alternatively, the batch can be dropped onto an open rubber mill batchoff system. A mill consists of twin counter- rotating rolls, one serrated, that provide additional mechanical working to the rubber and produce a thick rubber sheet. The sheet is pulled off the rollers in the form of a strip.

They supply a constant pressure throughout the whole billet. The disadvantage is that they are slow, between 50 and 200 mm/s (2–8 ips). Accumulator water drives are more expensive and larger than direct-drive oil presses, and they lose about 10% of their pressure over the stroke, but they are much faster, up to 380 mm/s (15 ips). Because of this they are used when extruding steel.

Synthetic fiber or synthetic fibre (in British English; see spelling differences) are fibers made by humans through chemical synthesis, as opposed to natural fibers that are directly derived from living organisms. They are the result of extensive research by scientists to improve upon naturally occurring animal and plant fibers. In general, synthetic fibers are created by extruding fiber-forming materials through spinnerets, forming a fiber. These are called synthetic or artificial fibers.

The Alabama map turtle (Graptemys pulchra) is a species of emydid turtle endemic to the southern United States. Differentiation from other turtle species includes a black stripe running down the center of its back with knobs extruding from it, but these projections wear down with age. T.H. Bean and L. Kumlen first collected the Alabama map turtle in July 1876 from a lake near Montgomery, Alabama. Type locality for this species is Montgomery County, Alabama.

Schistosoma nasale is a species of digenetic trematode in the family Schistosomatidae. S. nasale inhabits blood vessels of the nasal mucosa and causes "snoring disease" in cattle, but remains symptomless in buffaloes though extruding its eggs in nasal discharge.Dutt and Srivastava, 1962 The first intermediate host is a freshwater snail Indoplanorbis exustus that may be the sole natural intermediate host for Schistosoma nasale (and other two Schistosoma species) on the Indian sub-continent.

The company still sells "French crullers"Joseph P. Kahn, "With Progress, a Cruel Twist", Boston Globe, 25 October 2003. which can be formed by a kind of extruding nozzle. Tim Hortons,Tim Hortons Snacks & Baked Goods and Honey Dew Donuts still sell the Cruller doughnut. Krispy Kreme sell a similar doughnut the company refers to as a cruller, but in reality it is just a molded/formed cake (or Old Fashioned) doughnut.

Heat-shrinkable means just that, heat them up and they shrink, or more correctly, they recover in length. A heat-shrinkable sleeve starts out with a thick extruded poly olefin sheet (polyethylene or polypropylene) that is formulated to be cross-linkable. After extruding the thick sheet, it is taken to the "beam" where it is passed under a unit that subjects the sheet to electron irradiation.Accelerator apps: heat- shrink tubing , Symmetry, Dimensions of Particle Physics.

A large amount of water with high speed and temperature of 38-40 °C is circulated in jackets. The cylinder also has an air vacuum chamber, which removes air bubbles from the dough before extruding. Otherwise small bubbles will form in the pasta and decreases the mechanical strength which cause breakage from hours to days after drying. The air also oxidizes the carotenoid or xanthophyll, which results in a white, chalky appearance of the pasta.

The depth of the trench at the point of the earthquakes is 7,000–7,500 m. Northern Kamchatka lies at the western end of the Bering fault, between the Pacific Plate and North American Plate,Kamchatka: Edge of the Plate or the Bering platePedoja, K., Bourgeois, J., Pinegina, T., Higman, B., 2006. Does Kamchatka belong to North America? An extruding Okhotsk block revealed by coastal neotectonics of the Ozernoi Peninsula, Kamchatka, Russia, Geology, v.

It is traditionally made by steaming non-glutinous rice flour in siru (steamer), pounding it and rolling it between the palms and the table or rolling it between the palms. The method forms a thick, cylindrical rice cake, around in diameter. Hand-rolled garae-tteok is not uniform in size and has variations of thickness along its length. Modern garae-tteok is usually made by extruding the steamed rice flour with garae- tteok machines.

Extremely viscous resin extruding from the trunk of a mature Araucaria columnaris. Rosin is a solidified resin from which the volatile terpenes have been removed by distillation. Typical rosin is a transparent or translucent mass, with a vitreous fracture and a faintly yellow or brown colour, non-odorous or having only a slight turpentine odour and taste. Rosin is insoluble in water, mostly soluble in alcohol, essential oils, ether, and hot fatty oils.

Though initially identified as sugar transporters, a function conserved from prokaryotes to mammals, the MFS family is notable for the great diversity of substrates transported by the superfamily. These range from small oxyanions to large peptide fragments. Other MFS transporters are notable for a lack of selectivity, extruding broad classes of drugs and xenobiotics. This substrate specificity is largely determined by specific side chains which line the aqueous pocket at the center of the membrane.

Manganese Bronze Holdings plc (MBH) was the holding company of LTI Limited. The firm's sole business in its final years as a company was London black taxicab manufacturing through the LTI subsidiary. The Manganese Bronze and Brass Co was founded in 1881, incorporated in 1882 and originally made ship propellers, operating from factories in London. By World War II, it was also extruding and rolling specialised alloys, and in the 1950s expanded into light alloy product manufacturing.

Spray foam insulation extruding from a duct. Spray foam is a chemical product created by two materials, isocyanate and polyol resin, which react when mixed with each other and expand up to 30-60 times its liquid volume after it is sprayed in place. This expansion makes it useful as a specialty packing material which forms to the shape of the product being packaged and produces a high thermal insulating value with virtually no air infiltration.

He coded the level editor and the game engine, Trixel, which converts 2D tiles ("triles") into four-sided 3D voxels ("trixels"). Fish made 2D pixel art in Photoshop for each side of the trixel, which Bédard's custom software compiled into 3D game assets. Fish would then design levels in the level editor by extruding surfaces, a process he found "overwhelming" but akin to playing with Lego blocks. In their workflow, Fish first proposed ideas that Bédard would implement.

An increase in the number of MukB molecules could have influence on the processivity of the MukBEF complex as a DNA loop extruding factor resulting in larger or a greater number of the loops. Supercoiling can act in a concerted manner with DNA architectural proteins to reorganize the nucleoid. The overall supercoiling level decreases in the stationary phase, and supercoiling exhibits a different pattern at the regional level. Changes in supercoiling can alter the topological organization of the nucleoid.

In mineral drilling, special machinery can bring core samples to the surface at bottom-hole pressure, but this is too expensive for the inaccessible locations of most drilling sites. Keeping the processing facilities at very low temperatures limits thermal shocks. Cores are most brittle at the surface, so another approach is to break them into 1 m lengths in the hole. Extruding the core from the drill barrel into a net helps keep it together if it shatters.

In situations where the sealed pressure is very high (above 5,000 psi), metal rings are used on either side of the elements to prevent the rubber from extruding. A packer is run in the casing on production tubing or wireline. Once the desired depth is reached, the slips and element must be expanded out to contact the casing. Axial loads are applied to push the slips up a ramp and to compress the element, causing it to expand outward.

Endocytosis is a pathway for internalizing solid particles ("cell eating" or phagocytosis), small molecules and ions ("cell drinking" or pinocytosis), and macromolecules. Endocytosis requires energy and is thus a form of active transport. 4\. Exocytosis: Just as material can be brought into the cell by invagination and formation of a vesicle, the membrane of a vesicle can be fused with the plasma membrane, extruding its contents to the surrounding medium. This is the process of exocytosis.

It was built between 1925 and 1927, and consists of a rambling aggregation of intersecting wings and extruding gables, dormers, decks and porches. It included a pool that Hook believed to be one of the first private swimming pools in the Kansas City area. The house is significant both as a work of Mary Rockwell Hook and for its long association with her and her family (husband and two children). The home was in the family until 1972.

However, when looking at plan of this building, it is a typical Kampong (compound) house which the entrance, or front of the building, is marked by an extruding structure. The building is raised from ground level, in the consideration of possible flood or heavy rain in tropical climate. Deducing from the dimension of the theatre, the building contains one cinema hall with sufficient space for comfortable seats. Linear arrangement of the space gives people comfortable experience in the cinema.

It is performed after the material has been "spun" into filaments; by extruding the polymer melt through pores of a spinneret. During this process, the individual polymer chains tend to somewhat align because of viscous flow. These filaments still have an amorphous structure, so they are drawn to align the fibers further, thus increasing crystallinity, tensile strength, and stiffness. This is done on a draw twister machine.. For nylon, the fiber is stretched to four times its spun length.

The product of a quadruple VAM (vacuum arc melting) process, combined with hot extruding and different rolling applications is cured using high-pressure, high- temperature gas autoclaving. This produces reactor-grade zirconium that is about 10 times more expensive than the hafnium-contaminated commercial grade. Hafnium must be removed from zirconium for nuclear applications because hafnium has a neutron absorption cross-section 600 times greater than zirconium. The separated hafnium can be used for reactor control rods.

In addition to the standard library of primitive shapes, a user can create custom shape generators using a built-in JavaScript editor. Shapes can be imported in three formats: STL and OBJ for 3D, and 2-dimensional SVG shapes for extruding into 3D shapes. Tinkercad exports models in STL or OBJ formats, ready for 3D printing. Tinkercad also includes a feature to export 3D models to Minecraft Java Edition, and also offers the ability to design structures using Lego bricks.

The concrete will be poured for the foundational footings, giving the parking garage a surface to be built on. The steel columns will be connected to the slab by bolting and/or welding them to steel studs extruding from the surface of the poured concrete slab. Pre-cast concrete beams may be delivered on site to be installed for the second floor, after which a concrete slab may be poured for the pavement area. This can be done for multiple stories.

The original whips were hand made by ladies extruding chocolate from a piping bag onto a rubber mould, each containing 12 'formers'. This generated the original deeply ridged surface, and the fondant at that time was more dense. The texture of the outside surface is a skeuomorph. When the Duncan's brand name was dispensed with by Rowntree's and manufacturing moved from Beaverhall Road in the late 1970s, the manufacturing process changed from being hand made to being hollow moulded by machine.

Some of the figures watch the presentation of the window, others are looking up to Panel 4 where Jesus is delivering the Good Samaritan parable to two Pharisees. In the upper right hand of Panel 3 is the hand with pointing finger (the dextera domini)Peter and Linda Murray, The Oxford Companion to Christian Art and Architecture (Oxford, New York: Oxford University Press, 1996), s.v. "Dextera Domini," p. 136. extruding from foliage(?) apparently blessing the work and the window of the shoemakers.

This species has a pheromone communication system used during mating. The females contain an extruding sex pheromone gland which releases the pheromone, composed of tetradecanl acetate (14Ac), (E)-12-tetradecenyl acetate (E12–14Ac) and (Z)-12-tetradecenyl acetate (Z12–14Ac). This gland is composed of thick cell layers and is located between abdominal segments in the moth. In response to the female pheromones, males typically extrude hair-pencils, or pheromone signaling structures, prior to copulation, making it easier for the male to mate.

Rubber, whether it's natural or synthetic, arrives at the manufacturing facility in large bales. Rubber bands are made by extruding the rubber into a long tube to provide its general shape. There are a number of different methods that can be applied at this point in the manufacturing process. Originally, and in some instances still today, the rubber tubes will then be placed on mandrels, curing the rubber with heat, and then slicing them across the width of the tube into little bands.

Printrbot models can print in ABS or PLA plastic filament which can be purchased from the official store or other sources. Printrbot models can be outfitted to accept 1.75 mm or 3.0 mm diameter filament. The filament is available in many colours; the colour of the filament will determine the eventual colour of the model printed from it. Although the Printrbot hotend and extruder system is advertised to work with PLA and ABS, it is also capable of extruding many other filaments.

Mayon Volcano extruding lava flows during its eruption on December 29, 2009 Lava flows from stratovolcanoes are generally not a significant threat to humans and animals because the highly viscous lava moves slowly enough for everyone to flee out of the path of flow. The lava flows are more of a threat to property. However, not all stratovolcanoes erupt viscous and sticky lava. Nyiragongo is very dangerous because its magma has an unusually low silica content, making it quite fluid.

The actual extruding of vegetable oil from oilseeds by oilseed presses is preceded and followed by several other activities. The first step in the procedure is to have clean, dry seed. Removing material such as rocks, soil, chaff, leaves, sand, dust, and other foreign particles augments pressing efficiency, reduces wear, and decreases the chances of damage being done to the press. Drying seed to around 10% prevents the press from being clogged and also prevents the spread of mould during storage.

It has a gable roof and a large rectangular brick chimney centrally extruding from it. It is a frame-constructed structure with a clapboard exterior. It has open timber ceiling framed interiors with nineteenth-century six-over-six sash windows. The dwelling has four open fireplaces and one open hearth fireplace used traditionally for preparation of the family's meals, in its completion of construction, this made for a total of one fireplace in each room of the first and second floors.

Ptitim is made by extruding dough through a round mold, before it is cut and toasted, giving it the uniform natural-grain-like shape and its unique nutty flavor. Unlike common types of pasta and couscous, ptitim was factory-made from the outset, and therefore is rarely seen home-made from scratch. The store-bought product is easy and quick to prepare. Ptitim is popular among Israeli children, who eat it plain, or mixed with fried onion and tomato paste.

There are six groups of tool steels: water-hardening, cold-work, shock-resistant, high-speed, hot-work, and special purpose. The choice of group to select depends on cost, working temperature, required surface hardness, strength, shock resistance, and toughness requirements. The more severe the service condition (higher temperature, abrasiveness, corrosiveness, loading), the higher the alloy content and consequent amount of carbides required for the tool steel. Tool steels are used for cutting, pressing, extruding, and coining of metals and other materials.

In its raw form, tungsten is a hard steel-grey metal that is often brittle and hard to work. If made very pure, tungsten retains its hardness (which exceeds that of many steels), and becomes malleable enough that it can be worked easily. It is worked by forging, drawing, or extruding but it is more commonly formed by sintering. Of all metals in pure form, tungsten has the highest melting point (), lowest vapor pressure (at temperatures above ), and the highest tensile strength.

Keeping the processing facilities at very low temperatures limits thermal shocks. Cores are most brittle at the surface, so another approach is to break them into 1 m lengths in the hole. Extruding the core from the drill barrel into a net helps keep it together if it shatters. Brittle cores are also often allowed to rest in storage at the drill site for some time, up to a full year between drilling seasons, to let the ice gradually relax.

Anderson et al. (2005) wrote: "synapomorphic characters that link the fossils seeds [of P. splendens] to extant Aldrovanda include hard testa with an outer epidermis of palisade cells and with a smooth, strongly reflecting surface, short micropylar neck, and extruding, pointed chalazal area".Anderson, C.L., K. Bremer & E.M. Friis 2005. American Journal of Botany 92(10): 1737–1748. However, research published by Heřmanová & Kvaček (2010) has cast doubt on this hypothesis. These authors identified the fossilised remains of Palaeoaldrovanda as insect eggs, writing:Heřmanová, Z. & J. Kvaček 2010.

Spruce beetles usually infest the lower and middle parts of trunks. Trees that have been attacked are easy to recognize by concentrations of brown dust from bark at the basal areas of stems and trunks. However, sometimes apparently infected trees with green crowns can be without bark because of larval and woodpecker activity. Other common ways that infection can be detected is the presence of red-brown dust (frass) in bark crevices, many round exit holes, or small pitch tubes extruding from the bark.

In addition to semi- finished parts, cold forming may be used on metal stock, sheet, bar, and rod stock. Cold sizing can be performed on various metals, both ferrous and non- ferrous, and even materials like polymers and plastics. Sizing is related to other squeezing operations like swaging, coining, hobbing, staking and riveting, thread rolling, and extruding. Although the whole workpiece may be inserted into the die, the sizing operation can give dimensional accuracy to a portion of the part based on the contact with the die.

They were manufactured by high-pressure extruding of the green compact, then sintering almost to its theoretical density. The core consisted of 465,000 individual elements stacked to form 27,000 airflow channels; the design with small unattached elements reduced problems related with thermal stresses. The elements were designed for average operation temperature of ; the autoignition temperature of the reactor base plates was only 150 °C higher. The neutron flux was calculated to be 9×1017 neutrons/(cm2·s) in the aft and 7×1014 neutrons/(cm2·s) in the nose.

An abrasive flow machine normally includes two medium chambers equipped with hydraulic rams, a fixture for holding the workpiece, and a clamping system that holds all the components tightly together. Most machines allow for the loading of different types of abrasive medium, and include the capacity to adjust the pressure used in extruding the medium through the workpiece. They may be manually operated, or automated using CNC. For machines designed to accommodate high production volumes, accessories such as part-cleaning stations, unloading and reloading stations, media refeed devices, and media heat exchangers may be included.

The snack was invented after the Second World War by James Marker of Dayton, Ohio and W. T. Hawkins.Lesley Ciarula Taylor "Cheezies inventor dies in Belleville, Ont., at 90" Toronto Star, 3 May 2012 The pair were living in Chicago when they discovered a method, by trial and error, of extruding cornmeal, casting it into fingerling shapes, then deep frying it in vegetable shortening and sprinkling it with cheddar cheese. Production was moved to Tweed, Ontario in 1949 where the recipe was perfected and the W. T. Hawkins Ltd.

Model Skull With an estimated length of , a shoulder height of , and a weight of 3900-4500 kg (8600-9900 lb), H. gorgops was larger than its living relative, H. amphibius. Another feature setting it apart from H. amphibius was the placement of its eyes. Modern hippos have eyes placed high on the skull, but H. gorgops had eyestalk-like orbits extruding above its skull, making it even easier for the creature to see its surroundings while (almost) fully under water. This species was described by German scientist Wilhelm Otto Dietrich in 1928.

Hosoi's research interests include fluid dynamics, unconventional robotics, and bio-inspired design. For instance, one of her projects developed a robot that moved like a snail by extruding artificial snail slime and rippling over it. She has also studied how razor clams turn sand into quicksand while digging themselves in, and designed wetsuits using materials that mimic the thermal insulation properties of otter fur. She is the founder of a sports engineering program at MIT, which she started in 2011 after frustration at the performance of her cross-country bicycle on a downhill bicycling course.

Extruding dough for churros in Strasbourg Churros in Guatemala A street vendor in Colombia making churros Churros are fried until they become crunchy, and may be sprinkled with sugar. The surface of a churro is ridged due to having been piped from a churrera, a syringe-like tool with a star- shaped nozzle. Churros are generally prisms in shape, and may be straight, curled or spirally twisted. Like pretzels, churros are sold by street vendors, who may fry them freshly on the street stand and sell them hot.

An example of how houses in the Philippines must not be built: No structural columns, no extruding column steel reinforcements to secure the roof, cracked walls even during construction phase which is indicative of improper construction materials As the Philippines lies within the Pacific Ring of Fire where earthquakes and eruptions are more likely to occur as well as being at the edge of the Pacific Ocean where violent storms are likely to develop, proper construction philosophies and strategic location must be assessed so it can resist external forces.

Pringles potato chips are uniform in size and shape, which allows them to be stacked. Another type of potato chip, notably the Pringles and Lay's Stax brands, is made by extruding or pressing a dough made from dehydrated potato flour into the desired shape before frying. This makes chips that are uniform in size and shape, which allows them to be stacked and packaged in rigid cardboard or plastic canisters. Pringles are officially branded as "potato crisps" in the US. Pringles may be termed "potato chips" in Britain, to distinguish them from traditional "crisps".

The show is notable for not only stirring up but, in the end, radically changing the pop music world in the Hungary of the 2000s, often criticized due to the lack original talent that Megasztár set out to find. As Péter Geszti said during the third season finale, "Hungarian pop musicians are afraid of Megasztár singers because the latter are extruding the former from the pop market." Indeed, three albums from Megasztár singers already finished in Hungary's official top ten sales list, and by 2005, five of the top ten sellers were Megasztár- related albums.

The term guncotton was also used; although some references identify guncotton as a more extensively nitrated and refined product used in torpedo and mine warheads prior to use of TNT. Unreacted acid was removed from pyrocellulose pulp by a multistage draining and water washing process similar to that used in paper mills during production of chemical woodpulp. Pressurized alcohol removed remaining water from drained pyrocellulose prior to mixing with ether and diphenylamine. The mixture was then fed through a press extruding a long tubular cord form to be cut into grains of the desired length.

As the name implies, these cookies are made by extruding, or "squirting," the dough with a press fitted with patterned holes (a cookie press) or with a cake decorator, or pastry bag, to which a variety of nozzles may be fitted. In the United States, the name Spritzgebäck is often shortened to spritz becoming known as the spritz cookie. Spritzgebäck is a common pastry in Germany and served often during Christmas season, when parents commonly spend afternoons baking with their children for one or two weeks. Traditionally, parents bake Spritzgebäck using their own special recipes, which they pass down to their children.

Crown-of-thorns starfish and eaten coral off the coast of Cooktown, Queensland. The Crown-of-Thorns Starfish is a coral reef predator which preys on coral polyps by climbing onto them, extruding its stomach over them, and releasing digestive enzymes to absorb the liquefied tissue. An individual adult of this species can eat up to six square meters of living reef in a single year. Geological evidence suggests that the Crown-of-Thorns Starfish has been part of the Great Barrier Reef's ecology for "at least several thousand years", but there is no geological evidence for Crown of Thorns outbreaks.

In Sinhalese ancient artwork Makara has been an invented creature; it is made up of body parts of six or seven animals such as the trunk of the elephant, jaws of the crocodile, ears of the mouse or ape, extruding teeth of wild swine, the tail plume of the peacock and feet of the lion. Artistic Work The Makara is widely used in Sri Lankan Buddhist architecture, often depicted on toranas. The dragon balustrade is another kind of stone carvings which portray the Makara (dragon). These artworks used to decorate the entrance of Buddhist stupas, temples and Bo trees.

Each 3D-printed home is a single-story 650-square-foot structure built using a concrete-extruding printing apparatus called the Vulcan II, developed in partnership with ICON. The homes each take 24 hours to build, and cost $4,000, a fraction of traditional construction costs. Printing homes also provides "design freedom" in that printing with liquid concrete allows for all manner of shapes, and it simplifies the construction process, eliminating the need for drywall, insulation and wood framing. The first home printed in Austin, Texas by the Vulcan I took approximately 48 hours to complete and cost $10,000.

Takh Takh Lava Flow below Mount Adams Adams is made of several overlapping cones that together form an diameter base which is elongated in its north–south axis and covers an area of . The volcano has a volume of placing it second only to Mount Shasta in that category among the Cascade stratovolcanoes. Mount Adams was created by the subduction of the Juan de Fuca plate, which is located just off the coast of the Pacific Northwest. Mount Adams was born in the mid to late Pleistocene and grew in several pulses of mostly lava-extruding eruptions.

Corsair drawn with 3Doodler The 3Doodler is a 3D pen developed by Peter Dilworth, Maxwell Bogue and Daniel Cowen of WobbleWorks, Inc. (formerly WobbleWorks LLC). The 3Doodler works by extruding heated plastic that cools almost instantly into a solid, stable structure, allowing for the free-hand creation of three-dimensional objects. It utilizes plastic thread made of either acrylonitrile butadiene styrene ("ABS"), polylactic acid ("PLA"), or “FLEXY”, thermal polyurethane (“TPU”) that is melted and then cooled through a patented process while moving through the pen, which can then be used to make 3D objects by hand.

A round "French cruller" is made with an extruding nozzle Crullers are most commonly found in Canada, New England, the Mid-Atlantic and North Central states of the United States, but are also common in California. The German origin is probably why traditional crullers can be found more easily in the Midwest, where many German immigrants settled. Some family-owned bakeries still call them "krullers." In 2003, the Dunkin' Donuts chain of doughnut shops stopped carrying traditional crullers, claiming that the hand-shaped rectangular treats were too labor-intensive, and couldn't be simulated with new machines for mixing doughnut batter.

On the wall of each room are found rows of extruding stone blocks which used to support wooden beams and a wooden ceiling separating the upper and lower floors. In some places there are diagonal stones which is probably the place where there used to be a wooden stairway. Photo of Candi Sari (1901) by Christiaan Benjamin Nieuwenhuis The upper level was probably used by monks for meditation or worship. Some suggest the upper rooms were used as the place for monks to stay, rest, or sleep, while the lower rooms was the place for worship.

Prior to its use as a powdermill the site held an iron foundry which pre dated the attempt by the Spanish Armada to invade Britain. Under the direction of Sydney Little, "The Concrete King", the reservoir was constructed between 1929 and 1932 . The dam is of earth with a concrete slab facing and a puddle clay core and is 370 yards long with a height of 40 feet. The construction of the dam required 170 men working for nearly 40 months and, due to unforeseen difficulties caused by underlying and extruding sandstone strata, the estimated construction costs were exceeded by a considerable margin.

The female is slightly larger than the male in larva form, and as an adult finds a mate by extruding an organ that emits a pheromone which the male can smell. The male, which unlike the female has the large, feathered antennae characteristic of pheromone-using moths, flies zigzag search patterns, eventually homing in on a female. After mating, he goes off to find other females, while the female stops to lay between 20 and 100 eggs in a single layer on the underside of a leaf. The larvae stay together when very young, but become solitary as they gain size.

Experiments have shown the importance of temperature, but the trigger event, especially in arid regions, is often a storm. In anurans, males usually arrive at the breeding sites before females and the vocal chorus they produce may stimulate ovulation in females and the endocrine activity of males that are not yet reproductively active. In caecilians, fertilisation is internal, the male extruding an intromittent organ, the , and inserting it into the female cloaca. The paired Müllerian glands inside the male cloaca secrete a fluid which resembles that produced by mammalian prostate glands and which may transport and nourish the sperm.

The naming of the mountain is a bit of lore from the Old West. S P Crater can be climbed, and the lava flow can be viewed from the crater rim. C. J. Babbit, an 1880s rancher and early landowner of the mountain, expressed his opinion that the mountain resembled a chamber pot (or Shit Pot), and locally this became the accepted name. When viewed from certain angles on the ground, the combination of the smooth round shape of the cone, the dark lava spatter on the rim, and the long dark lava flow extruding from the base may resemble a toilet catastrophe.

In 2009, Schuh became a group leader at the MRC Laboratory of Molecular Biology in Cambridge, UK. Her work centers around the process of asymmetric oocyte division, in which oocytes mature into eggs by extruding half of their chromosomes in a small cell termed the polar body. This requires the spindle apparatus in these cells to be asymmetric. She discovered a role for proteins that control actin nucleation in the positioning of the spindle. In studying how actin helps position the spindle, she discovered that vesicles carrying specific signals can change the organization and density of actin networks.

More recently, foams have become a part of molecular gastronomy technique. In these cases, natural flavors (such as fruit juices, infusions of aromatic herbs, etc.) are mixed with a neutrally-flavored gelling or stabilizing agent such as agar or lecithin, and either whipped with a hand-held immersion blender or extruded through a whipped cream canister equipped with nitrous oxide cartridges. Some famous food-foams are foamed espresso, foamed mushroom, foamed beet and foamed coconut. An espuma or thermo whip is commonly used to make these foams through the making of a stock, creating a gel and extruding through the nitrous oxide canister.

The Melbourne Museum is a post-modernist building designed by Denton Corker Marshall Architects. Construction was managed by Baulderstone Hornibrook and completed in 2001, with the museum's official opening in 2000. The building features a grid-like order that embraces eccentric metal clad forms extruding out and creating an irregular sculptural composition with moments of abstract colour throughout the building. The museum is arranged in an individual layout, referencing Melbourne's iconic Hoddle Grid, which allows the importance of each component of the buildings historical, cultural and social significance to be read in loosely equal hierarchy and individuality.Unknown. (2002).

The actual process of extrusion coating involves extruding resin from a slot die at temperatures up to 320°C directly onto the moving web which may then passed through a nip consisting of a rubber covered pressure roller and a chrome plated cooling roll. The latter cools the molten film back into the solid state and also imparts the desired finish to the plastic surface. The web is normally run much faster than the speed at which the resin is extruded from the die, creating a coating thickness which is in proportion to the speed ratio and the slot gap.

Heading is a metalworking process which incorporates the forging, extruding and upsetting process.. It is often performed in the cold state, resulting in cold working. This process typically produces a near net shape workpiece, which means the final product is almost finished although it can sometimes create the final product less plating or heat treating. An important consideration in heading is the tendency for the wire to buckle if its unsupported length to diameter ratio is too high. This ratio usually is limited to less than 3:1 but with appropriate dies, it can be higher.

Additional designs include the Triflute and Trivex series. The Triflute design has a complex system of three tapering, threaded re-entrant flutes that appear to increase material movement around the tool. The Trivex tools use a simpler, non- cylindrical, pin and have been found to reduce the forces acting on the tool during welding. The majority of tools have a concave shoulder profile, which acts as an escape volume for the material displaced by the pin, prevents material from extruding out of the sides of the shoulder and maintains downwards pressure and hence good forging of the material behind the tool.

It is used in residential, commercial, industrial industry. Material selection for a mechanical or structural application requires some important considerations, including how easily the material can be shaped into a finished part and how its properties can be either intentionally or inadvertently altered in the process. Depending on the end use, metals can be simply cast into the finished part, or cast into an intermediate form, such as an ingot, then worked, or wrought, by rolling, forging, extruding, or other deformation process. Although the same operations are used with ferrous as well as nonferrous metals and alloys, the reaction of nonferrous metals to these forming processes is often more severe.

The intent is to regulate the burn rate so that a more or less constant pressure is exerted on the propelled projectile as long as it is in the barrel so as to obtain the highest velocity. The perforations stabilize the burn rate because as the outside burns inward (thus shrinking the burning surface area) the inside is burning outward (thus increasing the burning surface area, but faster, so as to fill up the increasing volume of barrel presented by the departing projectile). Fast-burning pistol powders are made by extruding shapes with more area such as flakes or by flattening the spherical granules. Drying is usually performed under a vacuum.

Alexander Just A Just–Hanaman light-bulb, Budapest, 1906 Alexander Just as a soldier during World War I Alexander Friedrich Just (12 April 1874, in Bremen – 30 May 1937, in Budapest) was an Austro-Hungarian chemist and inventor. Later, in Hungary he used the name Just Sándor Frigyes. In 1904 with Austro- Hungarian Franjo Hanaman he was the first to develop and patent an incandescent light bulb with a tungsten filament, made by extruding a paste of tungsten powder and a carbonaceous binder to produce a fine thread, then removing the carbon by heating in an atmosphere of hydrogen and water vapors. Just and Hanaman received a Hungarian patent in 1904, and later US Patent 1,018,502.

In March 2015, the Virginia Department of Transportation announced plans to replace ET Plus guardrails. "In March [2015], federal officials said the design met safety standards during crash tests." In September 2015, The FHWA and the American Association of State Highway and Transportation Officials published a joint task force report titled, “Safety Analysis of Extruding W-Beam Guardrail End Terminal Crashes.” The report concluded that there are no unique performance limitations that can be attributed to the ET-Plus, that there are real-world conditions that exceed the performance expectation of all end terminal systems, and that additional crash testing of all existing Report 350-compliant end terminals would be irrelevant and uninformative.

In the case of male crabs, the parasite causes the ventral abdominal plate to widen, which makes it more suitable for brooding, and alters the crab's behaviour so that it looks after the brood sac, despite this not being a normal behaviour for a male crab. Reproduction is completely suppressed in both male and female crabs which are effectively castrated. The barnacle seems able to take control of the timing of the crab's moult, extruding its brood sac immediately after ecdysis, when the crab's shell is soft. Suitable host crabs include the flatback mud crab (Eurypanopeus depressus), the Say's mud crab (Dyspanopeus sayi), the knotfinger mud crab (Panopeus lacustris), P. obessus, the furrowed mud crab (P.

Eliza Jane Morris continued her interest in the property, carrying 625 pounds of the purchase price in a mortgage due on 22 September 1922 but Ritchie paid it out two years earlier. The 1917 plan shows the cottage as it was when Ritchie bought it. It was very close to both side boundaries with five outbuildings, one of brick with its own verandah being hard against the eastern fence, the weatherboard building next door almost colliding with it from the other side. The surveyor noted the overhanging eaves and described the cottage as "an old brick house with an iron roof, with a long wing, part brick and part wood, extruding to the rear".

S.), the Museum of Vancouver (Canada), and the Institute of Jamaica in Kingston. At least two monarchs of Great Britain have been given lacebark clothing: King Charles II, who received a cravat and ruffles of lacebark from Sir Thomas Lynch, then governor of Jamaica, and Queen Victoria, who was presented with a lacebark dress at the 1851 Great Exhibition. Lacebark has also been used in the manufacture of utilitarian items such as curtains, hammocks, rope, bridles, and whips. In the case of whips, the handle was usually made from a narrow tree branch with the outer bark still attached, while the whip tail was made from twisted or braided strands of lacebark extruding from the same branch.

The aircraft employed an all-metal monocoque construction, comprising three sections with extensive use of 'Z-section' frames and 'L-section' longeron. The wing of the Beaufighter used a mid-wing cantilever all-metal monoplane arrangement, also constructed out of three sections. Structurally, the wing consisted of two spars with single-sheet webs and extruding flanges, completed with a stressed-skin covering, and featured metal-framed ailerons with fabric coverings along with hydraulically-actuated flaps located between the fuselage and the ailerons. Hydraulics were also used to retract the independent units of undercarriage, while the brakes were pneumatically-actuated. A Merlin-powered, Beaufighter night fighter Mark II of No. 255 Squadron RAF at RAF Hibaldstow, September 1941.

Salt glaciers (dark grey areas) derived from Hormuz halites, extruding from anticlinal crests in the Zagros Mountains of southern Iran The Hormuz Formation, Hormuz Series, Hormuz Evaporites or Hormuz Group is a sequence of evaporites that were deposited during the Ediacaran (Late Neoproterozoic) to Early Cambrian, a period previously referred to as the Infra-Cambrian. Most exposures of this sequence are in the form of emergent salt diapirs within anticlines of the Zagros fold and thrust belt. As a result of their involvement in post-depositional salt tectonics, the internal stratigraphy of the sequence is relatively poorly understood. They are the lateral equivalent of the evaporite-bearing Ara Group in the South Oman Basin.

The main building The main building (Villa padronale) was begun in 1546 under commission by the Venetian patricians Paolo and Francesco Contarini. It appears to have been built on the plinth of an older fortress like structure. While some documents claim the original design was by Andrea Palladio, this attribution is controversial. This core of the villa has a facade, oddly out of place in this open space, resembling a Gothic canal facade in Venice. The more elaborate flanking wings were commissioned by Marco Contarini between 1671 and 1676 extended the 16th century layout, building two large loggia wings at the sides of the previous main building, which are decorated with numerous telamon sculptures, extruding from the second story pilasters.

For Super Street Fighter IV, a third outfit intended to resemble the Chinese jiangshi was included, consisting of a long Chinese robe, black hat with his ponytail extruding from the top, yellow and black striped pants, and a yellow strip of paper meant to represent a sealing charm extending from the front of the hat and over his face. The developers considered to have the charm able to be knocked off by an opponent's attacks, and as a result alter his attack patterns and power; however, they felt this overcomplicated the character, and instead abandoned the idea. Assistant producer Natsuki Shiozawa cited the outfit as one of her five favorites in the game, feeling that design suited his body well.

In the extrusion of plastics, the raw compound material is commonly in the form of nurdles (small beads, often called resin) that are gravity fed from a top mounted hopper into the barrel of the extruder. Additives such as colorants and UV inhibitors (in either liquid or pellet form) are often used and can be mixed into the resin prior to arriving at the hopper. The process has much in common with plastic injection molding from the point of the extruder technology, although it differs in that it is usually a continuous process. While pultrusion can offer many similar profiles in continuous lengths, usually with added reinforcing, this is achieved by pulling the finished product out of a die instead of extruding the polymer melt through a die.

Early single-DNA-molecule experiments also demonstrated in real time that condensin I is able to compact DNA in an ATP-hydrolysis dependent manner. Most recently, single-molecule experiments have demonstrated that budding yeast condensin I is able to translocate along dsDNA (motor activity) and to "extrude" DNA loops (loop extrusion activity) in an ATP hydrolysis-dependent manner. In the latter experiments, the activity of individual condensin complexes on DNA was visualized by real-time fluorescence imaging, revealing that condensin I indeed is a fast loop-extruding motor and that a single condensin I complex can extrude 1,500 bp of DNA per second in a strictly ATP-dependent manner. It has been proposed that condensin I anchors DNA between Ycg1-Brn1 subunits and pulls DNA asymmetrically to form large loops.

Melt-blown nonwovens are produced by extruding melted polymer fibers through a spin net or die consisting of up to 40 holes per inch to form long thin fibers which are stretched and cooled by passing hot air over the fibers as they fall from the die. The resultant web is collected into rolls and subsequently converted to finished products. The extremely fine fibers (typically polypropylene) differ from other extrusions, particularly spun bond, in that they have low intrinsic strength but much smaller size offering key properties. Often melt blown is added to spun bond to form SM or SMS webs, which are strong and offer the intrinsic benefits of fine fibers such as fine filtration, low pressure drop as used in face masks or filters and physical benefits such as acoustic insulation as used in dishwashers.

The oldest identified caldera remnant straddles the border near McDermitt, Nevada–Oregon, although there are volcaniclastic piles and arcuate faults that define caldera complexes more than in diameter in the Carmacks Group of southwest-central Yukon, Canada, which are interpreted to have been formed 70 million years ago by the Yellowstone hotspot. Progressively younger caldera remnants, most grouped in several overlapping volcanic fields, extend from the Nevada–Oregon border through the eastern Snake River Plain and terminate in the Yellowstone Plateau. One such caldera, the Bruneau-Jarbidge caldera in southern Idaho, was formed between 10 and 12 million years ago, and the event dropped ash to a depth of one foot (30 cm) away in northeastern Nebraska and killed large herds of rhinoceros, camel, and other animals at Ashfall Fossil Beds State Historical Park. The United States Geological Survey (USGS) estimates there are one or two major caldera-forming eruptions and a hundred or so lava extruding eruptions per million years, and "several to many" steam eruptions per century.