Start by removing debris from the flame tamers (located directly over the burners) with a wire brush.
|
|
Just brush portholes with a stainless steel wire brush in an up-and-down motion like this .
|
|
Finally, she brushes out the wet hair with a wire brush bought from the American Girl store.
|
|
A stainless steel or brass wire brush can leave behind small bristles that get stuck in your grill and wind up in your food.
|
|
Start with hot water and the same metal scouring pad you use on a sticky pan, and upgrade to a wire brush if you need to.
|
|
According to her deposition, he threatened to put either a barbecue fork or wire brush up her vagina (her choice) because she had complimented a male friend.
|
|
A pair of dome earrings, for example, recalled church spires, with the gold first given a high sheen before it was textured with a fine wire brush.
|
|
I'm careful to keep the grill really clean and I brush it between everything with a wire brush and always wipe that immediately after with a clean, dry towel.
|
|
Even when I'm old and my hair resembles a steel wire brush, and I'm shouting at passing children about why they need to hear Horses, this album will always be with me.
|
|
Mr. Carluccio held court with passers-by, as he squirted the paint onto the bumpy canvas, and then used a coarse wire brush to work it into the rough contours of the cover's crevices and ridges.
|
|
"Usually I tell people it is fine if they want to use a wire brush, but after they use it to get a cloth to wipe down the grill surface and really inspect it before they start cooking on it," Harlor said.
|
|
Before you take a bite of that burger or potato salad, keep in mind the following: Grilling/wire bristles in food: If you are using a wire brush to clean your grill, make sure you thoroughly inspect it for lost bristles that may have become adhered to it.
|
|
Wire brush Round wire brushes A wire brush is a tool consisting of a brush whose bristles are made of wire, most often steel wire. The steel used is generally a medium- to high-carbon variety and very hard and springy. Other wire brushes feature bristles made from brass or stainless steel, depending on application. Wires in a wire brush can be held together by epoxy, staples, or other binding.
|
|
Instead Goodyear developed retractable wire-brush skids made of the same René 41 alloy as the airframe.
|
|
The cleaning is done with only water, a fine wire brush and rags, as chemicals damage the glass.
|
|
The origins of the wire brush are unknown, although it is believed that the Romans used similar tools in the manufacture of roof tiles. As the Roman Empire fell, the tool fell out of use.
|
|
Michelangelo sculpted the statue from a block of scrap marble, then rubbed it with dirt and a wire brush to artificially age it. The sculpture was sold to a collector as a work of ancient Greek classic art.
|
|
GTAW fillet weld Gas tungsten arc welding, because it affords greater control over the weld area than other welding processes, can produce high-quality welds when performed by skilled operators. Maximum weld quality is assured by maintaining cleanliness—all equipment and materials used must be free from oil, moisture, dirt and other impurities, as these cause weld porosity and consequently a decrease in weld strength and quality. To remove oil and grease, alcohol or similar commercial solvents may be used, while a stainless steel wire brush or chemical process can remove oxides from the surfaces of metals like aluminum. Rust on steels can be removed by first grit blasting the surface and then using a wire brush to remove any embedded grit.
|
|
Crime Library. Retrieved on March 3, 2014. According to O'Malley, Musso was killed at Miller's apartment, where he was beaten and burned with cigarettes as he sat on a child's play mat. The group also used a wire brush on him, then put him in a bathtub that was filled with kitchen cleaner and bleach.
|
|
3S-GTE shortblock on an engine stand waiting to be cleaned. The same engine after cleaning. Carbon deposits can be removed with a wire brush and the surface is then polished with a very fine sandpaper. Many times this kind of work is done by a machine shop as part of a more involved engine rebuild.
|
|
A second sand cast was made over the plasticine. This process created a void, which would be filled with melted bronze. To avoid the formation of air pockets air vents were installed before pouring the bronze. The bronze sections were welded together and sandblasted (using a wire brush) to clean the sculpture and produce a uniform texture.
|
|
Mechanical activation, needed for active soldering, can be performed by brushing (for example with use of stainless wire brush or steel spatula) or ultrasonic vibration (20–60 kHz). Active soldering has been shown to effectively bond ceramics, aluminium, titanium, silicon, graphite and carbon nanotube based structures at temperatures lower than 450 °C or use of protective atmosphere.
|
|
Rotating abrasive wheel on a bench grinder. wire brush mounted to bench grinder (tool rest in foreground). A bench grinder is a benchtop type of grinding machine used to drive abrasive wheels. A pedestal grinder is a similar or larger version of grinder that is mounted on a pedestal, which may be bolted to the floor or may sit on rubber feet.
|
|
Treatment techniques that may be successful in removing or reducing iron bacteria include physical removal, pasteurization, and chemical treatment. Treatment of heavily infected wells may be difficult, expensive, and only partially successful. Physical removal is typically done as a first step. Small diameter pipes are sometimes cleaned with a wire brush, while larger lines can be scrubbed and flushed clean with a sewer jetter.
|
|
Two of the most prevalent quality problems in GMAW are dross and porosity. If not controlled, they can lead to weaker, less ductile welds. Dross is an especially common problem in aluminium GMAW welds, normally coming from particles of aluminium oxide or aluminum nitride present in the electrode or base materials. Electrodes and workpieces must be brushed with a wire brush or chemically treated to remove oxides on the surface.
|
|
Tools, such as hooks or socket wrenches can be mounted at the end of the pole. More sophisticated poles can accept pneumatically or hydraulically driven power tools which allow, for example, bolts to be unscrewed remotely. A rotary wire brush allows a terminal to be scoured clean before a connection is made. However, a worker's dexterity is naturally reduced when operating tools at the end of a pole that is several metres long.
|
|
A cleaning pig for a 6-inch oil pipeline. The wire brush encircles the shaft and scours the interior of the pipeline. A scraper pig shown at the Trans-Alaska Pipeline System Visitors Center In pipeline transportation, pigging is the practice of using pipeline inspection gauges, devices generally referred to as pigs or scrapers, to perform various maintenance operations. This is done without stopping the flow of the product in the pipeline.
|
|
To stop the corrosion from continuing the object just needs to be aired out to remove any moisture and allow the normal layer of protection to form. Washing and a wire brush will remove most of the corrosion. For complete removal, 10% acetic acid or a mixture of polishing chalk and 20–40% NaOH can be used. Both require a thorough water rinsing afterward and do not restore lustrous surface finish if one was previously present.
|
|
These types of grinders are commonly used to hand grind various cutting tools and perform other rough grinding. Depending on the bond and grade of the grinding wheel, it may be used for sharpening cutting tools such as tool bits, drill bits, chisels, and gouges. Alternatively, it may be used to roughly shape metal prior to welding or fitting. A wire brush wheel or buffing wheels can be interchanged with the grinding wheels in order to clean or polish workpieces.
|
|
Angle grinders may be used for removing excess material from a piece. There are many different kinds of discs that are used for various materials and tasks, such as cut-off discs (diamond blade), abrasive grinding discs, grinding stones, sanding discs, wire brush wheels and polishing pads. The angle grinder has large bearings to counter side forces generated during cutting, unlike a power drill, where the force is axial. Angle grinders are widely used in metalworking and construction, as well as in emergency rescues.
|
|
Roger Mellie has frequently starred in such spoof advertisements, both in separate sections in Viz and also his own strip. Mellie is portrayed as someone who is willing to endorse any product whatsoever for money or gifts. Scatological humour also featured heavily in the ads; one ad featured "Clag- Gone", which consisted of a stationary bicycle with no seat. Instead, the rider simply placed his naked bottom onto the "Clag-Gone"'s wire brush wheel, which then cleaned away "winnits", "tag-nuts" and "dangleberries".
|
|
All findings were carefully cleaned and preserved. "Nothing is ever cut or torn from a wreck until we first make an accurate sketch of the vessel," explained Mr. Lamirande, "once it has been identified, it is carefully cleaned with chemicals or a wire brush. When rust and corrosion are removed it is coated with a plastic-like substance which can later be dissolved to permit further examination." At the end of each diving season a list of findings was sent to the proper authorities.
|
|
To this end a smith makes sure the fire is a reducing fire: a fire where, at the heart, there is a great deal of heat and very little oxygen. The smith also carefully shapes mating faces so that as they come together foreign material squeezes out as the metal is joined. To clean the faces, protect them from oxidation, and provide a medium to carry foreign material out of the weld, the smith sometimes uses flux—typically powdered borax, silica sand, or both. The smith first cleans parts to be joined with a wire brush, then puts them in the fire to heat.
|
|
A message written in dirt on the back of a van Part of a piece by Moose in San Francisco, California English artist Paul Curtis (aka Moose) is one of the first street artists to make an art piece using the reverse graffiti technique. He discovered the technique at his dishwashing job, and in 2004 used detergent and a wire brush to create designs in the dirt on pavements and walls in Leeds and Manchester.Symbollix.com Paul Curtis' website The first large-scale reverse graffiti art piece was made by Alexandre Orion in 2006. The intervention was called Ossario (ossuary) and was over 1000 feet long.
|
|
The metal can be hardened, tempered, normalized, annealed, case hardened and subject to other process that changes the crystalline structure of the steel to give it specific characteristics required for different uses. Finishing; Depending on the intended use of the piece a blacksmith, may finish it in a number of Ways. A simple jig that the smith might only use a few times in the shop it may get the minimum of finishing a rap on the anvil to break off scale and a brushing with a wire brush. Files can be employed to bring a piece to final shape, remove burrs and sharp edges, and smooth the surface.
|
|
The following description for the treatment of dry rot is typical of traditional methods:Hicken, N. (1972) The Dry Rot Problem 2nd Edition, London, Hutchinson & Co. # Cut out all wood showing decay, presence of white mycelium, etc. and all apparently sound timber within a radius of one metre of the nearest visibly decayed timber. Burn all such material. # Hack off all plaster/render and remove any skirtings, panelling, linings and ceilings necessary to trace the fullest extent of the growth over or through adjacent masonry, concrete or timber surfaces. # Clean off with a wire brush all surfaces and any steel and pipe work within the area up to a radius of 1.5 metres from the furthest extent of suspected infection.
|
|
Bristle brushes are usually used to apply plumbing paste flux. For electronic work, flux-core solder is generally used, but additional flux may be used from a flux pen or dispensed from a small bottle with a syringe-like needle. Wire brush, wire wool and emery cloth are commonly used to prepare plumbing joints for connection. Electronic joints are usually made between surfaces that have been tinned and rarely require mechanical cleaning, though tarnished component leads and copper traces with a dark layer of oxide passivation (due to aging), as on a new prototyping board that has been on the shelf for about a year or more, may need to be mechanically cleaned.
|
|
He made recordings of music which has been generated by motor-driven machines. One notable example of this type of music is his 1982 album of electric guitar music, "Machine Guitars", on which all guitars are played by saber saws without human intervention, except for one in which the guitar is played by a rotating wire brush, again with no human intervention. Recorded in Eindhoven and New York, it was described by Byron Coley in The Wire 231 as one of "the definitive modern NYC guitar work[s]", and its influence can be heard in the music of Eli Keszler, Alan Courtis and many more. Performances by The Machines took place in Amsterdam, Brussels, London, Berlin, New York, San Francisco.
|
|
Dermabrasion is a type of surgical skin planing, typically performed in a professional medical setting by a dermatologist or plastic surgeon trained specifically in this procedure. Dermabrasion has been practiced for many years (before the advent of lasers) and involves the controlled deeper abrasion (wearing away) of the upper to mid layers of the skin with any variety of strong abrasive devices including a wire brush, diamond wheel or fraise, sterilized sandpaper, salt crystals, or other mechanical means. Dermabrasion should not be confused with microdermabrasion which is a newer and non- surgical cosmetic procedure performed by non-physician personnel, nurses, estheticians, medical assistants, and most recently untrained individuals in their homes. Dermabrasion procedures are surgical, invasive procedures that typically require a local anaesthetic.
|
|
The plastic backing of the handle could be easily removed and items placed inside could be retrieved. Oddly, this feature was never mentioned in the owner's manual from 1970 until it was discontinued in 2006. Another unusual attachment, called the Handi- Butler introduced with the 1950 Model 510, used the turbine shaft at the front to power several devices, offered as convenience features that could sharpen knives, a cable could also be attached to a wire brush to remove rust from various surfaces, along with a lambs wool polishing disk, and a flannel buffing pad for more delicate tasks. The Handi-Butler was last offered with the Tradition model, and was replaced by the Turbo Sander with the Heritage model.
|
|
Sparkes revealed that no one had been able to locate or learn anything about Louis E. Hammond since he left Emory; no one had met the wife he claimed to be traveling with in 1937, or the car in which he claimed to have transported the stone from Chowan County. Hammond claimed to have cleaned Dare Stone Number 1 using a wire brush, eliminating an important means of authenticating the artifact. Sparkes easily established that Bill Eberhardt, Isaac Turner, and William Bruce had known one another for years, and that Turner had been a childhood friend of Tom Jett. He noted the suspicious coincidence that Eberhardt had found most of the Dare Stones, always alone or with his associate Turner, and along a path leading towards his own home.
|
|