The selection of material and surface quality are critical for maximizing water collection.
|
|
It's difficult to work with—it can become brittle—but you achieve a quite different surface quality.
|
|
The paintings have a lightness in tone and surface quality, but they are forceful in their suggestion of movement.
|
|
Big platforms including Google, Facebook and Twitter use signals from the Trust Indicators to identify and surface quality news.
|
|
These are some of the ways that tech companies are trying to surface quality information to voters on Election Day.
|
|
They played the occasion as well as the game, using the ground, pitch size and surface quality to their advantage.
|
|
What sets the show apart isn't the surface quality of its humor but its restless, almost feral energy and its slap-in-the-face attitude.
|
|
Since shifting away from a purely chronological feed and adding features like the Explore tab, Twitter is trying to surface quality, personalized content more to new and old users.
|
|
The surface quality of Singer's work is dull and unexciting if you're looking for expressivity — hovering between matte and glossy, only varying in a few works where the artist's hand is actually present.
|
|
Luger's masterful handling of ceramic, though, is a pleasure to (be)hold; nearby, his "Ceramic Knives" (2016) are meant to be held, the fragility of their material belied by their weight and surface quality, which evokes flint blades and bone or antler handles.
|
|
With Surface Tension, photographer Tabitha Soren (yep, that Tabitha Soren) has populated the walls of Transformer Station with an installation that brings into sharper focus the surface quality of the omnipresent touchscreens that deliver a great deal of our daily information and interaction.
|
|
Films such as Danfung Dennis's Hell and Back Again (2011) and Omar Mullick and Bassam Tariq's These Birds Walk (22008) were shot on DSLRs using lenses originally designed for still photography, producing images with extremely shallow depths of field, vibrant colors, and an almost hyper-real surface quality.
|
|
Texture is used to describe the surface quality of the work, referencing the types of lines the artist created. The surface quality can either be tactile (real) or strictly visual (implied). Tactile surface quality is mainly seen through three-dimensional works, like sculptures, as the viewer can see and/or feel the different textures present, while visual surface quality describes how the eye perceives the texture based on visual cues.
|
|
Thus increasing vibrations may appear up to levels which can seriously degrade the machined surface quality.
|
|
As a direct result, the unpleasant droning of thin walled components (e.g. air conditioning channels or facades) is reduced. At the same time, the vault-structured material shows enhanced acoustic damping characteristics. Full preservation of the surface quality: Vault structuring does not only sustain the material properties by gentle deformation but also its surface quality.
|
|
The water surface quality is also regularly monitored to ensure that the springs are natural and not being contaminated by pollutants.
|
|
Mechanically requested technical part of which hardness is improved by a cold calibration, good electric conductibility, machining time reduced, excellent surface quality.
|
|
The surface quality in the wire saw process is important for the semiconductor and photo-voltaic industries. The surface quality is also important in cutting stone and concrete for the construction industry. The wire saw process develops surface roughness on the cut surface. The relation between process parameters (wire speed, feed rate and wire tension) and surface roughness was analyzed in the literature.
|
|
Sometimes a mild vacuum is applied to the ribbon in this early part of the process since mechanical cooling can induce air currents which impact upon surface quality.
|
|
Flatness errors, like rippled dunes across the surface, produced these artifacts, distortion, and low image quality in the far field reflection of a household mirror. Surface quality, or surface accuracy, measures the deviations from a perfect, ideal surface shape. Increasing the surface quality reduces distortion, artifacts, and aberration in images, and helps increase coherence, collimation, and reduce unwanted divergence in beams. For plane mirrors, this is often described in terms of flatness, while other surface shapes are compared to an ideal shape.
|
|
In zig milling, the tool moves only in one direction. The tool has to be lifted and retracted after each cut, due to which machining time increases. However, in case of zig milling surface quality is better.
|
|
The surface quality can be affected by factors such as temperature changes, internal stress in the substrate, or even bending effects that occur when combining materials with different coefficients of thermal expansion, similar to a bimetallic strip.
|
|
Small Guan ware bowl on legs, with pronounced, and in this case deliberate crackle in the glaze Glaze defects are any flaws in the surface quality of a ceramic glaze, its physical structure or its interaction with the body.
|
|
In flight, this configuration was found to have a profile drag representative of boundary layer transition at 60% of chord. This gave researchers an idea of what level of wing surface quality was required to actually get the benefits of laminar flow airfoils.
|
|
Precision lenses for use in applications such as lasers, interferometers, and holography have surfaces with a tenth of a wavelength (λ/10) tolerance or better. In addition to surface profile, a lens must meet requirements for surface quality (scratches, pits, specks, etc.) and accuracy of dimensions.
|
|
Ordinary (homo-polymeric) polystyrene has an excellent property profile about transparency, surface quality and stiffness. Its range of applications is further extended by co-polymerization and other modifications (blends e.g. with PC and syndiotactic polystyrene).W. Keim: Kunststoffe: Synthese, Herstellungsverfahren, Apparaturen, 379 Seiten, Verlag Wiley-VCH Verlag GmbH & Co. KGaA, 1.
|
|
In the visual arts, texture is the perceived surface quality of a work of art. It is an element of two-dimensional and three-dimensional designs and is distinguished by its perceived visual and physical properties. Use of texture, along with other elements of design, can convey a variety of messages and emotions.
|
|
Bicycle tires being narrow, road surface is more important than for other transport, for both comfort and safety. The type and placement of storm drains, manholes, surface markings, and the general road surface quality should all be taken into account by a bicycle transportation engineer. Drain grates, for example, must not catch wheels.
|
|
The result is much larger panes and improved surface quality over broad sheet. In this manufacturing process glass is blown into a cylindrical iron mould. The ends are cut off and a cut is made down the side of the cylinder. The cut cylinder is then placed in an oven where the cylinder unrolls into a flat glass sheet.
|
|
Plant Pathology Journal, 27(3), 232-241 The white-pink mycelium on infected leaf blades is a distinguishing characteristic of the Microdochium nivale pathogen. Latin, R. (2007) Pink snow mold and Microdochium patch. Turfgrass Disease Profiles. Purdue Extension, Purdue University Fusarium patch is considered economically important in the turf grass industry because of its tendency to cause significant injury to golf greens, thereby decreasing putting surface quality.
|
|
Zirconia toughened alumina composites are composed of Al2O3 and ZrO2 nanopowders, which are producible via LF-FSP. Zirconia toughened alumina has been studied for its high toughness and resistance to wear and has biomedical applications. It has the potential to produce tougher and harder ceramic surfaces that may be used for ceramic hip implants. The lifetime of such implants depends on the surface quality.
|
|
Using only metallographic techniques, a skilled technician can identify alloys and predict material properties. Mechanical preparation is the most common preparation method. Successively finer abrasive particles are used to remove material from the sample surface until the desired surface quality is achieved. Many different machines are available for doing this grinding and polishing, which are able to meet different demands for quality, capacity, and reproducibility.
|
|
Steel belts play an essential role in modern, continuous production processes for wood based panels (WBP) such as particle boards, OSB- and MDF boards, where they serve as heat and pressure transfer media at the same time. As the steel belt surface has a direct influence on the final panel surface quality, this application imposes high demands on steel belts regarding thickness uniformity and surface finish.
|
|
The die casting process forces molten metal under high pressure into mold cavities (which are machined into dies). Most die castings are made from nonferrous metals, specifically zinc, copper, and aluminium-based alloys, but ferrous metal die castings are possible. The die casting method is especially suited for applications where many small to medium-sized parts are needed with good detail, a fine surface quality and dimensional consistency.
|
|
Grinding is used to finish workpieces that must show high surface quality (e.g., low surface roughness) and high accuracy of shape and dimension. As the accuracy in dimensions in grinding is of the order of 0.000025 mm, in most applications it tends to be a finishing operation and removes comparatively little metal, about 0.25 to 0.50 mm depth. However, there are some roughing applications in which grinding removes high volumes of metal quite rapidly.
|
|
Vibration problems generally result in noise, bad surface quality and sometimes tool breakage. The main sources are of two types: forced vibrations and self-generated vibrations. Forced vibrations are mainly generated by interrupted cutting (inherent to milling), runout, or vibrations from outside the machine. Self generated vibrations are related to the fact that the actual chip thickness depends also on the relative position between tool and workpiece during the previous tooth passage.
|
|
SH 17 continued through mostly rural countryside to Albany township, passing through Dairy Flat. Just outside Albany, the surface quality of the highway improves and Botts' dots replace painted lines on the road at the intersection with the Coatesville-Riverhead Highway. As the road enters Albany it becomes the Albany Expressway, running through the township until it meets the Albany Highway, whereupon it becomes a dual carriageway through to its terminus at Greville Road and SH 1.
|
|
Display Daily , accessed January 18, 2011 Film and Television ForthDD's microdisplays are used in Electronic Viewfinders (EVFs) for HD digital cinema cameras.Display Daily , accessed January 18, 2011 ARRI uses ForthDD's technology in its EVFs.Adlershof – News, accessed June 13, 2011 3D Optical Metrology ForthDD's microdisplays are used for fringe projection and confocal inspection in non-contact surface quality inspection systemsForth Dimension Displays - Applications page, 3D Metrology section (for example, in Sensofar productsSensofar – News page , accessed June 13, 2011).
|
|
The selection criteria of all process parameters are governed by the sheet thickness and by the strength of the work-piece material being pierced. The punch/die clearance is a crucial parameter, which determines the load or pressure experienced at the cutting edge of the tool, commonly known as point pressure. Excessive point pressure can lead to accelerated wear and ultimately failure. the surface quality of the trimmed edge is severely affected by the clearance, too.
|
|
Haerer is best known for her White Painting series of works. Her work was included in the Lyrical Abstraction exhibition at the Aldrich Museum of Contemporary Art, Ridgefield, Connecticut. In 1990, the Rothko Foundation at Artists Space sponsored a three-person exhibition of Ed Clark, Carol Haerer and Ted Kanshare, which was reviewed by Arts Magazine. Her large paintings were often stretched on supports with rounded corners, creating a sense of elegant objecthood as well as luminous surface quality.
|
|
Typical parts produced with this production operation include impellers made from stainless steel, bronze, complex cutting tools, plastic mould tooling, and others. Typical materials used are: wood, metal, water, plaster, epoxy and STLs, silica, and zirconia. This production operation is well known for providing tools with dimensional stability, surface quality, density and uniformity. For instance, on the slip casting process the cast part is of high concentration of raw materials with little additive, this improves uniformity.
|
|
Pressurized mold casting Due to the nature of oxygen entrapment in epoxy during the pouring and curing period it is common to have distortions and cavitation in the final injection mold. Pressurizing epoxy during the curing period is a form of surface quality retention. External pressures can be created with the use of a pressure pot connected to an air compressor. The external pressure causes air to be trapped inside the epoxy mold and crushed during curing.
|
|
Colors became richer and brush strokes more pronounced. With these changes, Rembrandt distanced himself from earlier work and current fashion, which increasingly inclined toward fine, detailed works. His use of light becomes more jagged and harsh, and shine becomes almost nonexistent. His singular approach to paint application may have been suggested in part by familiarity with the work of Titian, and could be seen in the context of the then current discussion of 'finish' and surface quality of paintings.
|
|
Heated-manifold direct- injection die casting, also known as direct-injection die casting or runnerless die casting, is a zinc die casting process where molten zinc is forced through a heated manifold and then through heated mini-nozzles, which lead into the moulding cavity. This process has the advantages of lower cost per part, through the reduction of scrap (by the elimination of sprues, gates, and runners) and energy conservation, and better surface quality through slower cooling cycles.
|
|
The Aerion SBJ's key enabling technology, supersonic natural Laminar flow, has been conclusively demonstrated in transonic wind tunnel tests and in supersonic flight tests conducted in conjunction with NASA. In the summer of 2010, an Aerion-designed calibration fixture was tested aboard a NASA F-15B. The experiments were intended to influence future laminar flow airfoil manufacturing standards for surface quality and assembly tolerances. A second test surface was flown during the first half of 2013, its design guided by the 2010 test.
|
|
Lasers can be used for welding, cladding, marking, surface treatment, drilling, and cutting among other manufacturing processes. It is used in the automobile, shipbuilding, aerospace, steel, electronics, and medical industries for precision machining of complex parts. Laser welding is advantageous in that it can weld at speeds of up to 100 mm/s as well as the ability to weld dissimilar metals. Laser cladding is used to coat cheap or weak parts with a harder material in order to improve the surface quality.
|
|
Prior to bonding the surface is covered with hydrogen and fluorine atoms. The bonding at room temperature is mostly based on van-der- Waals forces between those hydrogen and fluorine atoms. Compared to bonding with hydrophilic surfaces, the interface energy is lower directly after contacting. This fact builds up the need for a higher surface quality and cleanliness to prevent unbonded areas and thereby to achieve a full-surface contact between the wafers (compare infrared photograph of a bond wave).
|
|
Mirrors can be manufactured to a wide range of engineering tolerances, including reflectivity, surface quality, surface roughness, or transmissivity, depending on the desired application. These tolerances can range from wide, such as found in a normal household-mirror, to extremely narrow, like those used in lasers or telescopes. Tightening the tolerances allows better and more precise imaging or beam transmission over longer distances. In imaging systems this can help reduce anomalies (artifacts), distortion or blur, but at a much higher cost.
|
|
Single- point diamond turning is an alternate process, in which a computer-controlled lathe uses a diamond tip to directly cut the desired profile into a piece of glass or another optical material. Diamond turning is slow and has limitations in the materials on which it can be used, and the surface accuracy and smoothness that can be achieved. It is particularly useful for infrared optics. Several "finishing" methods can be used to improve the precision and surface quality of the polished surface.
|
|
Glass microsphere filler (left) and fiber fillers (right) Glass filler materials come in a few diverse forms: glass beads, short glass fibers, long glass fibers. in plastics by tonnage. Glass fibers are used to increase the mechanical properties of the thermoplastic or thermoset such as flexural modulus and tensile strength, There is normally not an economic benefit for adding glass as a filler material. Some disadvantages of having glass in the matrix is low surface quality, very viscous when melted, low weldability and warpage.
|
|
The surface quality of these bike lanes are good and the routing tends to be direct with gentle turns making it possible to cycle at good speeds for considerable distances. Cycleways come with their own sets of rules and systems - including traffic signals/lights, tunnels and lanes. Tunnels and bridges may or may not be accessible for cycling; if pedal cycles are prohibited, there is usually a separate facility. For example, the Western Scheldt Tunnel is not accessible for pedestrians, cyclists or moped riders.
|
|
Historically Brisbane had a network of trolleybuses and trams, both of which were closed in 1969 in favour of an expanded bus fleet. The Brisbane Tramways Trust experimented with providing bus services in the 1920s but these proved impractical due to mechanical unreliability and Brisbane's poor road surface quality. The first permanent bus services were introduced in 1940 as a supplement to Brisbane's tram services. In 1948 the council municipalised a number of privately run bus operators and expanded its own fleet of buses.
|
|
They are generally made from carbon steel or stainless steel. Stainless steel belts are corrosion resistant and provide excellent surface quality. Stainless steel belts are used primarily in the chemical, food, rubber, plastic, wood, and laminate industries. Carbon steel belts are energy efficient and ideal for applications necessitating radiant heating of products or in high-temperature applications that might exceed the annealing temperatures of stainless steel belts also carbon steel belts can more evenly distributed heat since most stainless steel alloys are comparatively poor heat conductors.
|
|
This preserves the surface quality of the mold for typically 50 - 100 cycles on a single epoxy mold. Metal molds Low cost bench top cnc milling machines allows home enthusiast to machine molds into soft material. Rather than P20 tool steel, most grades of aluminum can be machined into working mold capable of 1000 plus cycles. Mic 6 cast aluminum is more stable post machining and during cycles than hot extruded grades like 6061 and is easy to machine however it has lower mechanical properties.
|
|
Having worked in his professional career as a physicist and measurement engineer in a German DAX-Company Kurt Schreckling introduced advanced opportunities and unorthodox ways to optimize and measure telescopes for ambitious amateurs on a high quality level regarding surface quality, light weight construction while permanently compensating different optical aberrations. His ideas for improving telescopes and their optical perfection have become legendary in the German-speaking countries in the amateur telescope maker scene. Kurt Schreckling is active in various amateur astronomer forums in the internet.
|
|
In addition to small-scale components, ultrasonic vibration machining is used for structural components because of the required precision and surface quality provided by the method. The process can safely and effectively create shapes out of high-quality single crystal materials that are often necessary but difficult to generate during normal crystal growth. As advanced ceramics become a greater part of the structural engineering realm, ultrasonic machining will continue to provide precise and effective methods of ensuring proper physical dimensions while maintaining crystallographic properties.
|
|
These forming techniques are well known for providing tools and other components with dimensional stability, surface quality, high (near theoretical) density and microstructural uniformity. The increasing use and diversity of speciality forms of ceramics adds to the diversity of process technologies to be used. Thus, reinforcing fibres and filaments are mainly made by polymer, sol-gel, or CVD processes, but melt processing also has applicability. The most widely used speciality form is layered structures, with tape casting for electronic substrates and packages being pre-eminent.
|
|
Due to the need to increase the transmission of high-speed voice and data signals, the surface quality of copper wire is expected to continue to improve. Demands for better drawability and movement towards “zero” defects in copper conductors are expected to continue. A minimum mechanical strength requirement for magnet wire may evolve in order to improve formability and prevent excessive stretching of wire during high speed coiling operations. It does not seem likely that standards for copper wire purity will increase beyond the current minimum value of 101% IACS.
|
|
Throughout the day of competition the surface quality is likely to change drastically as gravel or dirt is worn away and ruts are created and deepened or even as snow and ice melt. It is because of these requirements that finding a location for an event is sometimes the most difficult part of event planning. When a site is chosen and the appropriate paperwork (including sanctioning and insurance) is filled out the next step is site preparation. The site must be further prepared by removing debris and planning the course for race day.
|
|
A toroidal mirror is a reflector whose surface is a section of a torus, defined by two radii of curvature. Such reflectors are easier to manufacture than mirrors with a surface described by a paraboloid or ellipsoid. They suffer from spherical aberration and coma, but do not suffer from astigmatism like a spherical mirror when used in an off-axis geometry, provided the angle of incidence is matched to the design angle. Because they are easier to manufacture, they are much cheaper than ellipsoidal or paraboloidal mirrors for the same surface quality.
|
|
Quilting varies from a purely functional fabric joinery technique to highly elaborate, decorative three dimensional surface treatments. A wide variety of textile products are traditionally associated with quilting that includes bed coverings, soft home furnishings, garments and costumes, wall hangings, artistic objects and cultural artefacts. A wide range of effects can be employed by the quilter that contribute to the final surface quality and utility of the quilted material. The quilter controls these effects through the manipulation of elements such as material type and thickness, stitch length and style, pattern design, piecing and cutting.
|
|
These unevennesses and bends resulting from the winding of the wire on delivery rolls have the effect that the wires are never completely close together according to their actual diameter but at a distance according to their unevenness. This gap formation is additionally influenced during the winding-up of the wire by the surface quality of its coating, e.g. the sliding behavior as well as by the expansion behavior or stiffness of the copper. The wire elongation may be between 6% and 3% depending on the wire diameter and the supplier.
|
|
Polishing the primary mirror for the Hubble Space Telescope. A deviation in the surface quality of approximately 4λ resulted in poor images initially, which was eventually compensated for using corrective optics. Mirrors are usually manufactured by either polishing a naturally reflective material, such as speculum metal, or by applying a reflective coating to a suitable polished substrate. In some applications, generally those that are cost-sensitive or that require great durability, such as for mounting in a prison cell, mirrors may be made from a single, bulk material such as polished metal.
|
|
After being directly fed into a hot rolling mill, the as-cast bar is typically rolled into 8 mm diameter rod to be used for wire drawing. Copper anode casting: Special dam blocks which contain anode lug molds and a traveling hydraulic shear are added to the twin-belt casting machine to continuously cast net shape copper anodes. Anode width of approximately 1 meter (excluding lugs) and thicknesses from 16 mm to 45 mm. The primary advantage of this process is uniformity of the as-cast anode in terms of size and surface quality.
|
|
The Brisbane Tramways Trust experimented with providing bus services in the 1920s but these proved impractical due to mechanical unreliability and Brisbane's poor road surface quality. The first permanent bus services were introduced in 1940 as a supplement to Brisbane's tram services. In 1948 the Brisbane City Council municipalized 20 privately run bus operators and expanded its own fleet of buses. The first tram lines to close were the Lower Edward Street to Gardens route, and the Upper Edward Street to Gregory Terrace route in 1947, the latter due to the very steep grades on that line.
|
|
The B2O3 content for borosilicate glass is typically 12–13% and the SiO2 content over 80%. High chemical durability and low thermal expansion (3.3 × 10−6 K−1) – the lowest of all commercial glasses for large-scale technical applications – make this a versatile glass material. High-grade borosilicate flat glasses are used in a wide variety of industries, mainly for technical applications that require either good thermal resistance, excellent chemical durability, or high light transmission in combination with a pristine surface quality. Other typical applications for different forms of borosilicate glass include glass tubing, glass piping, glass containers, etc.
|
|
His post office murals have the same social realist style as most of the others produced by New Deal artists. See for example his Frontier Mail in the post office at Rehoboth Beach, Delaware. It can also be seen, for example, in a painting of 1936 called Composition showing two men seated at a table with a coffee pot and mugs, a woman standing with broom in hand, and a cat lying on the floor of a sparsely-furnished room. Although having a Cubist surface quality, it could not be said to be an abstract painting.
|
|
The surface quality is typically measured with items like interferometers or optical flats, and are usually measured in wavelengths of light (λ). These deviations can be much larger or much smaller than the surface roughness. A normal household-mirror made with float glass may have flatness tolerances as low as 9–14λ per inch (25.4 mm), equating to a deviation of 5600 through 8800 nanometers from perfect flatness. Precision ground and polished mirrors intended for lasers or telescopes may have tolerances as high as λ/50 (1/50 of the wavelength of the light, or around 12 nm) across the entire surface.
|
|
Originally, the A12 followed the route of the Roman road closely and so was fairly straight, but there are now several town bypasses, so the road through Essex now has several meanders. The A12 formerly went through Brentwood, Mountnessing, Ingatestone, Margaretting, Chelmsford, Boreham, Hatfield Peverel, Witham, Kelvedon, Copford, Stanway and Colchester, but these are all now bypassed, and the A12 is a dual carriageway with mostly grade-separated junctions for its whole length in Essex. Now, the A12 is behind the suburb of Chelmer Village. It is this stretch of the A12, particularly between Chelmsford and Colchester, which has led to the poor reputation for surface quality of the A12.
|
|
Polymers such as PMMA and HEMA:MMA are used as matrices in the gain medium of solid-state dye lasers, also known as solid-state dye-doped polymer lasers. These polymers have a high surface quality and are also highly transparent so that the laser properties are dominated by the laser dye used to dope the polymer matrix. These type of lasers, that also belong to the class of organic lasers, are known to yield very narrow linewidths which is useful for spectroscopy and analytical applications. An important optical parameter in the polymer used in laser applications is the change in refractive index with temperature also known as dn/dT.
|
|
In chemical-assisted ultrasonic machining (CUSM), a chemically reactive abrasive fluid is used to ensure greater machining of glass and ceramic materials. Using an acidic solution, such as hydrofluoric acid, machining characteristics such as material removal rate and surface quality can be improved greatly compared to traditional ultrasonic machining. While time spent machining and surface roughness decrease with CUSM, the entrance profile diameter is slightly larger than normal due to the additional chemical reactivity of the new slurry choice. In order to limit the extent of this enlargement, the acid content of the slurry must be carefully selected as to ensure user safety and a quality product.
|
|
The slip used in slip casting is often liquified with a substance that reduces the need for additional water to soften the slip; this prevents excessive shrinkage which occurs when a piece containing a lot of water dries. Slip-casting methods provide superior surface quality, density and uniformity in casting high-purity ceramic raw materials over other ceramic casting techniques, such as hydraulic casting, since the cast part is a higher concentration of ceramic raw materials with little additives. A slip is a suspension of fine raw materials powder in a liquid such as water or alcohol with small amounts of secondary materials such as dispersants, surfactants and binders. Pottery slipcasting techniques employ a plaster block or flask mould.
|
|
A view of Mahatma Gandhi Expressway dedicated to the Nation on 24 August 2004 by Union Minister for Shipping Road Transport & Highways T. R. Baalu at Vadodara In 2004, it was reported that the road surface quality on certain stretches of the expressway was inferior due to the substandard quality of construction materials used. In 2005, it was reported that a major accident took place on the expressway, resulting in a pileup that involved nine vehicles due to fog. The Ahmedabad-Nadiad stretch is considered the most dangerous, with fatal accidents reported since the opening of the expressway. The expressway has been referred to as not accident-prone when compared to the Mumbai Pune Expressway.
|
|
Interior of Docklands Stadium with the roof closed in 2005 From the beginning, the stadium's playing surface was criticised for its slipperiness, hardness and lack of grass coverage, and the increased risk of injury that this causes to players. Maintaining surface quality remains one of the stadium's biggest challenges. The stadium's orientation and highly built up grandstands mean that the Northern end of the stadium in particular receives only receives 6 weeks of sunlight a year; concerts held at the stadium are also usually placed at the Southern end due to the ability for grass to recover more quickly. The entire surface undergoes regular, expensive replacement during the season with turf grown externally, under contract by HG Turf, whereas the responsibility of laying and managing the turf lies with Docklands Stadium management.
|
|
Once he accepted this, Gottlieb was compelled to use all the tools he had developed in his long painting career – touch, visual balance, surface quality, and more – to make his sculptures, like his paintings, become "a vehicle for the expression of feeling… I feel a necessity for making the particular colors that I use, or the particular shapes, carry the burden of everything that I want to express, and all has to be concentrated within these few elements." In all Gottlieb created 42 sculptures, including three large, outdoor pieces that are currently in the collections of The National Gallery of Art in Washington, DC, The Storm King Art Center in New Windsor, NY, and the Metropolitan Museum of Art in New York City.Adolph Gottlieb Sculptor, edited by Sanford Hirsch, Adolph and Esther Gottlieb Foundation,2012 pp.2–13 Gottlieb remained active throughout the 1960s.
|
|
The limitations of boring in terms of its geometric accuracy (form, position) and the hardness of the workpiece have been shrinking in recent decades as machining technology continues to advance. For example, new grades of carbide and ceramic cutting inserts have increased the accuracy and surface quality that can be achieved without grinding, and have increased the range of workpiece hardness values that are workable. However, working to tolerances of only a few micrometres (a few tenths) forces the manufacturing process to rationally confront, and compensate for, the fact that no actual workpiece is ideally rigid and immobile. Each time a cut is taken (no matter how small), or a temperature change of a few hundred degrees takes place (no matter how temporary), the workpiece, or a portion of it, is likely to spring into a new shape, even if the movement is extremely small.
|
|
These uhmw polyurethane or Delrin© puck equipped gloves ( Velcro affixed to each palm is a disc or plate of replaceable plastic) permit the freeriders the ability to place a palm down on the ground during the apex of slides to act as a form of outrigger of-sorts , supporting the rider's weight as they slide to shave speed-off their rapidly accelerating decent of a hill. Eventually , as rider experience increases, the need to assist ones balance through the use of ["hands-down"] style decreases & more experienced freeride practitioners can perform the same results via [" standup slide" ] " pre-checks" . Standup slides take much practice and experience to accomplish. The sliding style itself can have very different & custom- tailored characteristics , this being based -on many factors such as riding style, board geometry, truck setup , bushing durometer, hill angle and distance , the asphalt or concrete road surface quality and most importantly, the particularly wheel size,shape and material choice (polyurethane durometer) ridden.
|
|