A set screw is almost always driven with an internal-wrenching drive, such as a hex socket (Allen), star (Torx), square socket (Robertson), or a slot. The set screw passes through a threaded hole in the outer object and is tightened against the inner object to prevent it from moving relative to the outer object. It exerts compressional or clamping force through the bottom tip that projects through the hole. A potentiometer knob with a set screw for locking it in place.
|
|
Common centerless thread grinding production rates are 60 to 70 pieces per minute for a long set screw.
|
|
A structural pipe fitting, also known as a slip on pipe fitting, clamp or pipe clamp is used to build structures such as handrails, guardrails, and other types of pipe or tubular structure. They can also be used to build furniture and theatrical riggings. The fittings slip on the pipe and are usually locked down with a set screw. The set screw can then be tightened with a simple hex wrench.
|
|
Set screw or setscrew in the UK refers to a bolt which is fully threaded, with no smooth shank. These commonly have a hex head, but are also found with socket or screw heads. This contrasts with usage in the US where a set screw is almost universally a grub screw or small-headed bolt. A fully threaded bolt is commonly called a cap screw in the US.
|
|
22LR in the 1930s. Nowadays .22LR is reduced to 1,000 grams. Some trigger guards were drilled for a set screw to restrict rearward movement, thereby increasing speed in the Rapid Fire events.
|
|
Examples of set screws A set screw, also known as a blind screw or a grub screw, is a type of screw generally used to secure an object within or against another object, usually without using a nut (see bolts compared with screws). The most common examples are securing a pulley or gear to a shaft. Set screws are usually headless, meaning that the screw is fully threaded and has no head projecting past the thread's major diameter. If a set screw does have a head, the thread will extend all the way to the head (whereas a bolt might have an unthreaded shank between the head and thread).
|
|
Allen Manufacturing Company Inc advertisement for the Allen Safety Set Screw, a brand of set screw, in the Automobile Trade Directory, January 1913. The scant documentation available indicates that the idea of a hex socket screw drive was probably conceived as early as the 1860s to the 1890s, but that such screws were probably not manufactured until around 1910. Rybczynski (2000) describes a flurry of patents for alternative drive types in the 1860s to the 1890s in the US,. which are confirmed to include internal-wrenching square and triangle types (that is, square and triangular sockets) (), but he explains that these were patented but not manufactured because of the difficulties and expense of doing so at the time.
|
|
An example application is when a set screw is screwed into a pulley hub so that its end- point bears firmly against the shaft. The fastening action is by friction between the screw and the shaft, often (but not always) with some amount of elastic or plastic deformation of one or both.
|
|
The center conductor is soldered to a hole resulting in a flat center contact. The cable shield is soldered to the strain-relief spring which is held in the body of the connector with a set screw. With no provision for spring loading of the connection ring, vibration tends to loosen the threaded ring and create intermittent contact.
|
|
In his autobiography, the founder of the Standard Pressed Steel Company (SPS; now SPS Technologies, Inc.), Howard T. Hallowell Sr, presents a version of events. in which SPS developed a hex socket drive in-house, independently of Allen, circa 1911. From this came the line of products. This account from Hallowell does not mention the Allen patent of 1910, nor the Allen safety set screw product line.
|
|
In 2010 Fender updated their line of hot rod model amps and released the "Blues Junior III," adding many physical changes to the standard black tolex model. Notable differences include the Fender "lightning bolt" speaker, "sparkle" circuit modification, rattle-reducing shock absorbers, set-screw "chicken head" knobs, "dog bone" handle, larger Fender jewel light, black non-reflective control panel, and "Blues Junior" subtext on the logo plate.
|
|
This private residence in Jamaica Plain, Boston displayed 250,000 lights in 2006. The electric utility company installed special wiring; the electric bill was $2,000 per month. Incandescent (midget) or LED-based sets usually have each lamp connected in series to be powered without a transformer in the set. Screw-base C7 and C9 light sets use line voltage (120 volt) bulbs and are wired in parallel.
|
|
The tapered key is tapered only on the side that engages the hub. The keyway in the hub has a taper that matches that of the tapered key. Some taper keys have a gib, or tab, for easy removal during disassembly. The purpose of the taper is to secure the key itself, as well as, to firmly engage the shaft to the hub without the need for a set screw.
|
|
However, since then, inexpensive pentalobe screwdrivers, manufactured by third parties, have become relatively easy to obtain. Pentalobe screw sizes include TS1 (0.8 mm, used on every iPhone after and including the iPhone 4), TS4 (1.2 mm, used on the MacBook Air and the MacBook Pro with Retina display), and TS5 (1.5 mm, used on the 2009 MacBook Pro battery). The TS designation is ambiguous as it is also used for the Torq-set screw drive.
|
|
This has both pros and cons. On the pro side, such deformation increases the holding power (torque resistance) of the joint, as the screw is essentially "making its own detent" on a small but effective scale. On the con side, if one is aiming to have a blemish-free cosmetic finish on the part being set against, one must take actions to prevent the circular marks. In most set screw applications, this consideration is irrelevant.
|
|
The story, if any, of whether SPS's methods required licensing of Allen's 1910 patent is not addressed by Hallowell's memoir. The book does not mention which method—cold forming or linear broaching—was used by SPS in these earliest years. If the latter was used, then Allen's patent would not have been relevant. Soon after SPS had begun producing the [hex] socket head set screw, Hallowell had the idea to make a [hex] socket head cap screw (SHCS).
|
|
Pentalobe screw sizes include TS1 (also known as P2 or 0.8 mm, used on the iPhone 4 and subsequent models), TS4 (also known as P5 or 1.2 mm, used on the MacBook Air [since late 2010], the MacBook Pro with Retina Display and the 2015 MacBook) and TS5 (also known as P6 or 1.5 mm, used on the 2009 MacBook Pro battery). The TS designation is ambiguous as it is also used for a Torq- set screw drive.
|
|
The main body of the Lewis-type camera was mounted on the front box, but the rear section was slotted into the bed for easy sliding. Once focused, a set screw was tightened to hold the rear section in place. Having the bellows in the middle of the body facilitated making a second, in-camera copy of the original image. Daguerreotype cameras formed images on silvered copper plates and images were only able to develop with mercury vapor.
|
|
For production machine tools, the shank type is usually one of the following: a standard taper (such as Morse or Brown & Sharpe), a straight round shank to be held by a collet, or a straight round shank with a flat for a set screw, to be held by a solid toolholder. For hand tools, the shank end is usually a square drive, intended for use with the same type of wrench used to turn a tap for the cutting of screw threads.
|
|
Twist-on wire connectors are commonly color-coded to indicate the connector size and, hence, their capacity. They are commonly used as an alternative to terminal blocks or the soldering of conductors together, since they are quicker to install and, unlike soldered connections, allow easy subsequent removal for future modifications. Twist-on connectors are not often used on wire gauges thicker than AWG #10 (5.26 mm²), because such solid wires are too stiff to be reliably connected with this method. Instead, set screw connectors, clamps or crimp connectors are used.
|
|
Blue with silver frame or blue being most common and silver barrels more scarce. Screws can enter from either the left or right, mainspring set screw, none, or hole without threads present, throughout the serial number distribution with no apparent continuity. Serial number is on the frame under left grip. Extensive study has identified approximately 140 known examples, being that this model has quite a delicate mechanism and was replaced by the Remington-Elliot Derringer "New Repeating Pistol" even before all were assembled, the survival rate of this model is expected to be quite low.
|
|
These rifles are not known to have the reliability issues that plague the later Century Arms conversions. Some have been able to improve reliability by modifying the gas shutoff pin with an tapped set screw for gas adjustment.MAS 49/56 adj gas valveMAS 49/56 Adjustable Gas Valve Commercial 7.5×54mm "French" ammunition made in countries other than France for current distribution has been known to produce burst fire (2 or 3 rounds at a time) because of more sensitive primers.Barnes, Frank C., Cartridges of the World, DBI Books Inc.
|
|
P. L. Robertson, of Milton, Ontario, Canada, first commercialized the square socket in 1908, having perfected and patented a suitable cold forming method, using the right material and the right die design. In 1909–1910, William G. Allen too patented a method of cold-forming screw heads around a hexagonal die (). Published advertisements for the "Allen safety set screw" by the Allen Manufacturing Company of Hartford, Connecticut, exist from 1910. Although it is unlikely that Allen was the first person to think of a hex socket drive, his patent for a manufacturing method and his realized product appear to be the first.
|
|
The wire may be wrapped directly under the head of a screw, may be held by a metal plate forced against the wire by a screw, or may be held by what is, in effect, a set screw in the side of a metal tube. The wire may be directly stripped of insulation and inserted under the head of a screw or into the terminal. Otherwise, it may be either inserted first into a ferrule, which is then inserted into the terminal, or else attached to a connecting lug. which is then fixed under the screw head.
|
|
Leakage transformer A leakage transformer, also called a stray- field transformer, has a significantly higher leakage inductance than other transformers, sometimes increased by a magnetic bypass or shunt in its core between primary and secondary, which is sometimes adjustable with a set screw. This provides a transformer with an inherent current limitation due to the loose coupling between its primary and the secondary windings. In this case, it is short-circuit inductance which is actually acting as a current limiting parameter. The output and input currents are low enough to prevent thermal overload under all load conditions—even if the secondary is shorted.
|
|
Large over-sized lever on the Rifleman's rifle Westerns were popular when the television show The Rifleman premiered in 1958, and producers tried to find gimmicks to distinguish one show from another. The Rifleman's gimmick was a modified Winchester Model 1892 rifle, with a large ring lever drilled and tapped for a set screw. The lever design allowed him to cock the rifle by spinning it around his hand. In addition, the screw could be positioned to depress the trigger every time he worked the lever, allowing for rapid fire, emptying the magazine in under five seconds during the opening credits.
|
|
The screw terminals are hollow and allow up to at least three 1 mm (CSA) wires, twisted together, to be inserted to a depth of up to and secured with a set screw. The contact terminal set screws are installed at a slight angle to allow easier screwdriver access after the switch mechanism has been installed into a wall-plate - before fixing the wall-plate to the wall. Also shown is a "loop" connection terminal. This terminal plays no part in the action of the switch but, because there is available space, it is provided as an insulated terminal for joining other wires, if required (such as the neutral wires).
|
|
Depending on the collet design, it can be either pulled (via a threaded section at the rear of the collet) or pushed (via a threaded cap with a second taper) into a matching conical socket to achieve the clamping action. As the collet is forced into the tapered socket, the collet will contract, gripping the contents of the inner cylinder. (The axial movement of cones is not mandatory, however; a split bushing squeezed radially with a linear force—e.g., set screw, solenoid, spring clamp, pneumatic or hydraulic cylinder—achieves the same principle without the cones; but concentricity can only be had to the extent that the bushing's diameters are perfect for the particular object being held.
|
|
Two paired screw terminals, typically used for connecting ceiling-mounted light fixtures Multiple screw terminals can be arranged in the form of a barrier strip (as illustrated at the top right), with a number of short metal strips separated by a raised insulated "barrier" on an insulating "block" - each strip having a pair of screws with each screw connecting to a separate conductor, one at each end of the strip. These are known as connector strips or chocolate blocks ("choc blocks") in the UK. This nick-name arises from the first such connectors made in the UK by GEC, Witton in the 1950s. Moulded in brown plastic they were said to resemble a small bar of chocolate. A similar arrangement is common with paired screw terminals, where metal tubes are loosely encased in an insulating block with a set screw at each end of each tube to hold and thus connect a conductor.
|
|