Mucus that's a pale gray rubber cement consistency may indicate a nasal blockage.
|
|
You probably couldn't forget this strong-scented, goopy rubber cement glue even if you tried.
|
|
So with some EVA foam, rubber cement, and a couple weeks hard work, she fully embodied a horseshoe crab.
|
|
Newborns with absent development of an open nasal passage will have thick, pale rubber cement-like mucus filling their nose.
|
|
Anyone who spent any amount of time in my room ended up slightly nauseated, because of all the rubber cement.
|
|
"I'd spill the rubber cement, I'd spill the ink pot, or I'd cut my finger and ruin the layout," he recalled.
|
|
I spent long afternoons in a cloud of acetone fumes, cleaning rubber cement off the laminate, while Tom, in another room, cursed the raised dots.
|
|
"It also had a burnt rubber/cement smell to it and a very strong energy about it, like a battle flag," Browne turned it into the Everett fire department, where his suspicions were confirmed.
|
|
I filled a giant Tupperware container with materials for collages: old magazines, Urban Outfitters catalogs from that era where they were sending out mini hardcover books filled with abstract images and colored pages, my paints, X-Acto knives, scissors, cutting boards, glue sticks, rubber cement.
|
|
After hearing all about "the invisible horsemen galloping toward us," Lizzie arrives home to "bills and supermarket fliers," to a son who needs rubber cement peeled off his hands so he can keep playing Minecraft — so he can keep building this imagined world, even as another world is ending.
|
|
The solvents used in rubber cement present some hazards, including flammability and potential for abuse as inhalants. Therefore, as with any adhesive containing solvents, rubber cement should be used in an open area. Also, care needs be taken to avoid heat sources, as n-heptane and n-hexane are highly flammable. Rubber cement and rubber cement thinners that contain acetone will damage polished surfaces and many plastics.
|
|
Copydex is a common latex-based rubber cement in the UK. It can be easily recognised by its characteristic "fishy" odour. It has been owned since 1986 by Henkel.
|
|
Rubber cement is favoured in handicrafts applications, where easy and damage-free removal of adhesive is desired. For example, rubber cement is used as the marking fluid in erasable pens. Because rubber cements are designed to peel easily or rub off without damaging the paper or leaving any trace of adhesive behind, they are ideal for use in paste-up work where excess cement might need to be removed. It also does not become brittle like paste does.
|
|
A bottle of rubber cement, showing a brush built into its cap and a photo about to be cemented to graph paper. Rubber cement (cow gum in British English) is an adhesive made from elastic polymers (typically latex) mixed in a solvent such as acetone, hexane, heptane or toluene to keep it fluid enough to be used. This makes it part of the class of drying adhesives: as the solvents quickly evaporate, the rubber solidifies, forming a strong yet flexible bond.
|
|
Other So-Lo Marx product lines — diving suits, rubber cement, resoling material, meat tenderiser, bicycle seats, instant gravy, plaster statuette moulds — face imminent cancellation.Betsy Harris: "'American dream' found in packable, Tote- along boots", The Indianapolis Star 22 July 1984, p.7.
|
|
Acetone is good for removing some glues, nail polish, ink stains, rubber cement, and grease. Nail polish remover may contain acetone, however for general use it is best to obtain bottled acetone from a hardware store. It can be diluted with water.
|
|
It is applied to the back using diluted rubber cement (using benzene as the solvent). No sights or other modern attachments are used. The draw weights vary, but most are above twenty kilograms. The cost for this type of bow is in the US$800 range.
|
|
Rubber cement is simply a mixture of solid rubber in a volatile solvent that will dissolve it. When the cement is applied, the solvent evaporates, leaving the rubber as the adhesive. Almost any rubber (pre-vulcanized or not) can be used. The rubbers used might be natural rubber, gum mastic or gum arabic.
|
|
In that case, the patent covered a process in which an unpatented strip of fabric was coated with an unpatented rubber cement composition. The accused infringer supplied similarly coated strips, which were unpatented but specially adapted for use in the patented method. The patentee unsuccessfully sued for contributory infringement. This was held patent misuse.
|
|
Gummed film refers to a technique used to measure nuclear fallout. It involves the use of a sheet of plastic (cellulose acetate) or paper substrate coated on one side with an adhesive (e.g., rubber cement). The sheet is exposed (adhesive-side up) to the environment to be monitored, where fallout particles land on (and thus adhere to) the gummed film.
|
|
The first pH-probe > In measuring the acidity of the gastric contents, it was found possible to > lower an electrode into the stomach. The apparatus designed for work on the > stomach contents consists chiefly of a rubber tube 60 cm. long and 3 mm. > bore, and two No. 40 silk covered copper wires, that were coated with rubber > cement and dried several times.
|
|
Older formula rubber cements are not considered an archivally sound adhesive because of their low pH value (making them acidic) and will cause deterioration of photographs and paper over time. Today's rubber cements are acid-free, making them ideal for archival purposes. Rubber cement thinners are also available, and are used to replace the solvent that evaporates from the container or to remove residual adhesive.
|
|
Haley was born Gail Einhart in Charlotte, North Carolina. At The Charlotte Observer where her father was art director, she later recalled, "In the art department and pressrooms I soaked up the exciting smells and sounds of the graphic arts. I've had printer's ink and rubber cement in my veins ever since." She studied at Richmond Professional Institute and the University of Virginia (graphics and painting).
|
|
Mad editor Harvey Kurtzman spotted the word printed in the Polish language section of a multi- languaged "Instructions for Use" sheet accompanying a bottle of aspirin, and Kurtzman, who was fascinated with unusual words, decided it would make an appropriate but meaningless background gag. After cutting the word out of the instruction sheet, he made copies and used rubber cement to paste "Potrzebie" randomly into the middle of Mad satires.
|
|
Donald Duck is cooking pancakes in his kitchen, singing "Shortnin' Bread," when two chipmunks, Chip and Dale, get wind of the smell wafting through their home in the stovepipe. Chip and Dale attempt to steal Donald's pancakes; Donald devises various ways to rid himself of the unwanted guests, including slipping Chip and Dale a pancake made of rubber cement instead, but Chip and Dale eventually make off with all the pancakes, much to Donald's chagrin.
|
|
Astronauts have made use of these pens in outer space. Ballpoint pens with erasable ink were pioneered by the Paper Mate pen company. The ink formulas of erasable ballpoints have properties similar to rubber cement, allowing the ink to be literally rubbed clean from the writing surface before drying and eventually becoming permanent. Erasable ink is much thicker than standard ballpoint inks, requiring pressurized cartridges to facilitate inkflow—meaning they can also write upside-down.
|
|
Otherwise the (new to the 950) magnesium body proved a durable and rugged upgrade from the 900. Other known issues include the rubber finger grip, which could come loose, and while it caused no functional issues, it was bothersome and affected the "feel" of the camera in the shooting mode. The grip could be replaced with simple rubber cement. (Note: the grip is missing in the photo above.) The body swivel bearing could become a bit wobbly over time.
|
|
Normally, a sheet of rubber is glued to a blade using various table tennis brand glues such as Butterfly, Donic, and DHS. Some glues may work even if it wasn't designed specifically for table tennis, such as Rubber Cement and Tear Mender. The rubber is not removed until it wears out or becomes damaged. In the 1980s, some players developed a new technique with a special glue called speed glue to apply the rubber every time they played.
|
|
After heating and drying, the non-tacky web was then cut into strips and wound into rolls. The next step in the process was to apply a coating of rubber cement to the pre-coated material just before the strip was applied to the insole. This application is made by the shoe manufacturer. The fabric thus coated is then at once applied to the insole and "formed in" around the lip, usually with a hand tool.
|
|
Although inhaled alcohol does reduce the caloric content, the savings are minimal. After expressed safety and health concerns, sale or use of AWOL machines was banned in a number of American states. The effects of solvent intoxication can vary widely depending on the dose and what type of solvent or gas is inhaled. A person who has inhaled a small amount of rubber cement or paint thinner vapor may be impaired in a manner resembling alcohol inebriation.
|
|
Cheryl made her debut in Archer first episode, "Mole Hunt", on September 17, 2009. Cheryl, part of the wealthy Tunt family, is introduced as the incompetent personal assistant to Malory Archer (Jessica Walter). She is portrayed as an emotionally fragile, ditzy personality in Archer early years; among her attributes are her choking fetish and addiction to rubber cement. In later seasons of the comedy, Cheryl assumes new personae—notably Cherlene in Archer Vice and Charlotte Vandertunt in Archer Dreamland—and evolves into an increasingly neurotic character.
|
|
Latex sheet-based clothing is constructed by a three-stage process. First a pattern for a specific garment is selected, and adjusted carefully to suit the measurements supplied by the customer. Then the sheet latex is cut out on a flat board, by hand: lastly latex glue (generally rubber cement solvent-based adhesives) is used to join seams together. Skilled latex makers can build a stocking, shaped to match the contours of a specific person's leg, made from latex only 0.2 mm thick, in under an hour.
|
|
The needle-through-arm effect uses a gimmicked needle and stage blood as well as a small quantity of adhesive, such as rubber cement or spirit gum. The bead at the end of the hat pin is hollow and made of rubber so that it can hold a small amount of stage blood. The needle is hollow and has a small hole in its side through which the "blood" can flow. When the magician appears to sterilize their arm, they actually coat their arm with a thin film of adhesive.
|
|
They agreed on a cushion cork center; two wrappings of yarn; a special rubber cement coating; two more wrappings of yarn; and, finally, a horsehide cover. Baseballs have gone through only a few small changes since the compromise. During World War II, the United States banned the use of rubber for non war-related goods, including for baseballs. So in 1943, instead of using rubber, baseballs were made with rubber-like shells of balata (also used in golf balls), which is obtained from a particular type of tropical tree.
|
|
An alternative is a combination patch and plug. This is manufactured with a plug built into it; applying this patch is done similarly except with more steps, including drilling a hole at the puncture so the plug can be pulled through it, as well as cutting off the excess plug from the outside the tire. The final method, the tire plug, can be performed without removing the tire. The penetrating object is removed from the tire, and a plug coated in rubber cement then inserted with a handle, typically supplied with the kit.
|
|
Symptom to Diagnosis: An Evidence Based Guide, (Amazon Kindle, Second Edition) Eating foods prepared with monosodium glutamate (MSG) may thus result in headache. Acetaldehyde from alcohol may also cause a headache either acutely or after a number of hours (hangover). Poisons, like carbon tetrachloride found in insecticides and lead can also cause headaches with repeated exposure. Ingesting lead paint or having contact with lead batteries can cause headaches, and so can exposure to materials that contain chemical solvents, like benzene, which are found in turpentine, spray adhesives, rubber cement, and inks.
|
|
Type could be set with a typewriter, or to achieve professional results comparable to letterpress, a specialized typesetting machine. The IBM Selectric Composer, for example, could produce type of different size, different fonts (including proportional fonts), and with text justification. With photoengraving and halftone, physical photographs could be transferred into print directly, rather than relying on hand-made engravings. The layout process then became the task of creating the paste up, so named because rubber cement or other adhesive would be used to physically paste images and columns of text onto a rigid sheet of paper.
|
|
As a final step, 10–20 μL of probe is added, the sample is covered with a coverslip which is sealed with rubber cement, and the slide is heated to 97 °C for 5–10 minutes to denature the DNA. The slide is then placed in a 37 °C oven overnight so that the probe can hybridize. On the next day, the sample is washed and a blocker for nonspecific protein binding sites is applied. If horseradish peroxidase (HRP) is going to be used, the sample must be incubated in hydrogen peroxide to suppress endogenous peroxidase activity.
|
|
Shoe Goo can be used as a pliable adhesive for separated shoe components, as a filler on worn shoe soles, and as a sealer to repair waterproof fabrics and footwear. Skateboarders use Shoe Goo on their skate shoes to both protect and repair damage done by the sandpaper-like "grip tape" of the skateboard. Shoe Goo can be used on rubber, wood, glass, concrete and metal. The product is also used by hobbyists in lieu of rubber cement as an assembly adhesive for radio controlled models of cars and aircraft, repair of Lexan bodies, and as a waterproofing agent for model boats.
|
|
Self-sealing tires work on punctures up to a certain size. The patch repair is commonly used in a repair shop. Some may not patch a worn tire if: the hole is close to a previous patch, there are already more than two patches, the puncture requires more than two patches, the punctures are too close, and/or the puncture is close to the sidewall. A patch is performed by removing the tire, marking the puncture, scouring the surface to create a smooth surface (inside of the tire), applying rubber cement, applying the patch, then pressing it into the surface with a small metal wheel attached to a handle.
|
|
As Keroro triumphantly finds his coin, he knocks over the container, which breaks, causing the orb to shine wildly. After Keroro attempts to fix the container with rubber cement, the duo dashes out of the shrine and toward home, leaving the remaining piece of the container to transform into a pink As Keroro builds his new GM Sniper Custom model, he discovers a small red X on his face. He goes to both Fuyuki and Natsumi to tell them about his dilemma, but neither of them are of any help. That night, a menacing white Keronian appears from the mystery shrine, and gives numerous Earthlings the same red X. The next day, it is discovered that anyone who possesses this red mark gains telepathic powers named "Revocommi", allowing them to communicate with their minds.
|
|
In Watercolouring, frisket, also sometimes called masking fluid, is a removable liquid masking fluid based on latex and ammonia, often available in various colours to make its presence more obvious, which is applied to the surface in order to mask off the areas that are not to be coloured by a given application of paint. Frisket is usually used when the unmasked areas are desired to be the same colour and a rapid wash is being applied, or for negative painting effects. Watercolouring frisket is applied using a brush, allowed to dry, and then the watercolour paints are applied and also allowed to dry. Once the paper is completely dry, the frisket can be easily removed by gentle rubbing with a natural crepe rubber pickup - the same as those used for removal of rubber cement.
|
|
Headlines and other typographic elements were often created and supplied separately by the typesetter, leaving it to the paste up artist to determine their final position on the page. Adhesive was then applied to the back side of these strips, either by applying rubber cement with a brush or passing them through a machine that would apply a wax adhesive. The adhesives were intentionally made semi-permanent, allowing the strips to be removed and moved around the layout if it needed to be changed. The strips would be adhered to a board, usually a stiff white paper on which the artist would draw the publication's margins and columns, either lightly in pencil or in non- photographic blue ink, a light cyan color that would be ignored by the orthochromatic film used to make printing plates in offset lithography.
|
|