Sentences Generator
And
Your saved sentences

No sentences have been saved yet

14 Sentences With "overfills"

How to use overfills in a sentence? Find typical usage patterns (collocations)/phrases/context for "overfills" and check conjugation/comparative form for "overfills". Mastering all the usages of "overfills" from sentence examples published by news publications.

This routinely overfills certain courses and causes overflowing lecture halls.
The "inverted nipple" cupcakes in episode 202When Chris, an episode 2 participant, overfills his cupcake tins, the cupcakes collapse in the oven.
Put simply, she overfills the plate to the point where we get a meaty smorgasbord of complications, but only a nibble or two of real substance.
He gets a smaller trash can to pay less to the city, but then puts all his extra trash in our bin, so ours overfills and we have to pay extra.
In years when lots of snow melts upstream or increasingly stormy spring rain overfills midwestern rivers, the Heffingtons get gravel from a nearby quarry, fill bags and build a defensive wall.
But since the late 1980s the area also has seen an accelerating drumbeat of glacial lake floods, which happen when a natural dam of rock or other material holding back water gives way as a lake overfills, said Hamid Mir, an environmental analyst at the province's planning and development department.
While injecting, Hart intentionally overfills the bubbles with a calculated amount of paint so that the excess paint would drip down the flat side of the bubble wrap.“Press Release: Descendants.” Anna Zorina Gallery. Retrieved on 2015-02-06.
Breast engorgement is the sense of breast fullness experienced by most women within 36 hours of delivery. Normally, this is a painless sensation of "heaviness". Breastfeeding on demand is the primary way of preventing painful engorgement. When the breast overfills with milk it becomes painful.
Late at night, a deaf old man is the sole patron in a cafe. Nearby, two waiters, one young, the other older, talk about him. When the old man orders another brandy, the young waiter purposely overfills his glass. The waiters speculate about the old man's recent suicide attempt.
When a rockfish is caught at depths of 60 feet or more and pulled to the surface, the swim bladder cannot adjust quickly to the change in water pressure and overfills with air – pushing the fish's stomach out of its mouth and causing damage to other organs.Brochure produced by Sea Grant on rockfish barotrauma This does not affect the eating quality of the fish; however, significant numbers of rockfish inadvertently caught with other species are wasted in this manner.
The length of fibre required to attain true equilibrium is now much greater than the length of practical multimode transmission systems, which makes the term effectively obsolete. In the absence of strong mode-mixing, high order mode filtering is the primary remaining mechanism for potential change of an input mode power distribution. If a well-aligned laser is the optical source, the mode power distribution is highly concentrated in the lowest order modes, and remains essentially unchanged with distance due to the lack of mode-mixing. If an optical source that overfills the fibre is used, only the highest order guided mode group experiences excess attenuation, and the mode power distribution becomes slightly filtered as a result.
The way paper texture effects become relatively more pronounced as negative size decreases can be demonstrated with a digital camera by photographing a sheet of paper lit from behind, first at a distance where the sheet just overfills the field of view, and then at a closer distance where the field of view is perhaps one third as wide. (A stack of the same paper will appear much more uniform if it is viewed by reflected light with diffuse illumination.) Anyone who wishes to make calotypes today should expect that otherwise successful negatives will suffer in comparison to the best surviving early work if a relatively small format such as 10 x 10 cm (4 x 4 in) is used. Despite the use of large formats and careful paper selection,Buckman, op. cit., p. 22.
Each state was given authority to establish such a program within its own jurisdiction, to compensate owners for the cleanup of underground petroleum leaks, to set standards and licensing for installers, and to register and inspect underground tanks. Most upgrades to USTs consisted of the installation of corrosion control (cathodic protection, interior lining, or a combination of cathodic protection and interior lining), overfill protection (to prevent overfills of the tank during tank filling operations), spill containment (to catch spills when filling), and leak detection for both the tank and piping. Many USTs were removed without replacement during the 10-year program. Many thousands of old underground tanks were replaced with newer tanks made of corrosion resistant materials (such as fiberglass, steel clad with a thick FRP shell, and well-coated steel with galvanic anodes) and others constructed as double walled tanks to form an interstice between two tank walls (a tank within a tank) which allowed for the detection of leaks from the inner or outer tank wall through monitoring of the interstice using vacuum, pressure or a liquid sensor probe.
In optical fiber technology, the substitution method is a method of measuring the transmission loss of a fiber. It consists of: #using a stable optical source, at the wavelength of interest, to drive a mode scrambler, the output of which overfills (drives) a 1 to 2 meter long reference fiber having physical and optical characteristics matching those of the fiber under test, #measuring the power level at the output of the reference fiber, #repeating the procedure, substituting the fiber under test for the reference fiber, and #subtracting the power level obtained at the output of the fiber under test from the power level obtained at the output of the reference fiber, to get the transmission loss of the fiber under test. The substitution method has certain shortcomings with regard to its accuracy, but its simplicity makes it a popular field test method. It is conservative, in that if it were used to measure the individual losses of several long fibers, and the long fibers were concatenated, the total loss obtained (excluding splice losses) would be expected to be lower than the sum of the individual fiber losses.

No results under this filter, show 14 sentences.

Copyright © 2024 RandomSentenceGen.com All rights reserved.