110 Sentences With "operating time" | Random Sentence Generator

"This doesn't only increase the operating time of a robot but also potentially removes some of the need for wiring," Shepherd said.

Of course, as Soltani points out, even a fine of $100 million would constitute "a couple minutes of operating time" for Facebook.

The removal of the button could also help free up some space for a slightly larger battery, thus giving it more operating time.

A CFM representative told the NTSB panel that coating condition, lubrication and the length of operating time contributed to the fan blade separation.

It's built a research fleet of seven vehicles, and they're coming up on their tenth completed construction project; all in all, their fleet has about 6,000 hours of operating time.

"During the coming period, until the next comprehensive assessment for Forsmark 1 and 2, the two reactors will pass the originally analyzed operating time of 40 years," SSM said in a statement.

The aim of the price floor is to reduce coal plants' operating time to 200 hours per year and gas plants to 500, curbing 12 million tonnes in carbon emissions, the ministry said.

Long-term, the plan is to have aircraft zipping around at between 30 and 60 mph, with 30 minutes of in-air operating time and the ability to pick up and drop-off passengers on demand, with no pilot required.

As the batteries in these devices aged (and there's really no way to prevent a battery in a phone from aging), the operating time naturally shortened, but in periods of "peak load" the phone would shut down, often unexpectedly, and even when the battery appeared to have have 40 percent of more of its life left—I know because my iPhone 6 was affected by the issue.

It should therefore be ensured, at relatively high expenditures, that this simultaneousness of the application movement is maintained also during an extended operating time.

The aim of problem is to minimize the total operating time of primary relays and eliminate the miscoordination among the primary and backup relay pairs.

The An-2 serial number 1G132-21 was registered USSR-70766 and was certified for operation on 4 November 1971. The airframe had a total operating time of 2,591 flight hours with 3,477 landings. The Mi-8T serial number 3771 was registered USSR-25686 and was certified on 8 June 1973. The total operating time of the helicopter was 1,298 hours with 3,416 landings.

Typical time period in open-close duty. t1 is the operating time and may not exceed the maximum permissible running time Typical time period in modulating duty.

While underway, the fuel consumption of the main engines is 42 tons of heavy fuel oil or diesel per day at or 30 tons per day at , giving the vessel an operating time of 45 to 67 days depending on the speed. During dynamic positioning operations the fuel consumption is 15 tons per day and the operating time depends on the distance and speed of transit to location.Vessel specification: Fennica .

Operating time depends upon the composition of concentrate and the amount of the sulfur removal required. Multiple hearth roasters have the capability of producing a high-purity calcine.

According to one source, the airliner was converted into an Avia 14M (Il-14M) model at an unknown date. The total operating time of the aircraft was 11,682 hours.

2014 Apr 1;34(3):241-4. The literature highlights significant reduction in maternal complications including uterine extensions, blood loss and blood transfusions. Also highlighted are significant reduction in operating time and length of stay.

Professor Fabrice Gilles at Université de Lille studied the impact of the Aubry laws by analyzing data on capital operating time from the French Central Bank and the administrative files on worktime regulation agreements from the French Ministry of Labour. He found that capital operating time has not decreased in shift-work firms, because they responded by increasing the intensity of night-shift work and adding some additional overtime. In fact, shift-work companies have expanded scheduled hours to preserve output and increase productivity. Non-shift-work companies have decreased their capital operating costs.

The speed at which a fuse blows depends on how much current flows through it and the material of which the fuse is made. The operating time is not a fixed interval, but decreases as the current increases. Fuses have different characteristics of operating time compared to current. A standard fuse may require twice its rated current to open in one second, a fast-blow fuse may require twice its rated current to blow in 0.1 seconds, and a slow-blow fuse may require twice its rated current for tens of seconds to blow.

The engine was started eleven times. All test objectives were successfully accomplished, and NRX/EST operated for nearly two hours, including 28 minutes at full power. It exceeded the operating time of previous Kiwi reactors by nearly a factor of two.

This operative training and experience is currently limited and some negative perceptions regarding increased operating time and complications with this type of surgery remain. One recent study suggests future uptake relies strongly on the availability of evidence, training, instrumentation and reduced costs.

Fourteen years later, on 16 November 1988, the 87468 was operated by the Krasnoyarsk Civil Aviation Administration. Cheremshanka Airlines later retrieved the Yak-40 in 1993. The total operating time of the aircraft was 22,203 flight hours and a flight cycle of 17,220 cycles.

As he later explained to investigators, the mechanic decided that the defect was within tolerance. Engine No.3 had 8200 hours operating time without repair. The aircraft was allowed to fly to New York with three engines and only the No.4 engine was fully serviceable.

Exelon normally operates the Riverside Generating Station as a peaking power plant. As the mid-Maryland region is a summer peaking load, the majority of the plant's operating time will be during hot summer days. The Riverside Generating Station is dispatched by the PJM Interconnection regional transmission organization.

Flight 201/8 was operated by Imperial Airlines using a Lockheed Constellation L-049 four-engine propliner (registration ' (c/n 1976). The aircraft was manufactured in April 1946, and first acquired by Imperial in May 1961. The aircraft had logged 32,589 hours of operating time immediately prior to the accident flight.

Air- Cobot in a hangar of Air France Industries. All electronics equipment is carried by the 4MOB mobile platform manufactured by Sterela. The off-road platform, equipped with four-wheel drive, can move at a speed of 2 metres per second (). Its lithium-ion battery allows an operating time of eight hours.

An inverse-time over-current (ITOC) relay is an overcurrent relay which operates only when the magnitude of their operating current is inversely proportional to the magnitude of the energize quantities. The operating time of relay decreases with the increases in the current. The operation of the relay depends on the magnitude of the current.

Saipan departed on her seventh deployment to the Mediterranean in July 1998. Saipan spent substantial operating time in the Adriatic Sea due to turmoil in Albania. On 28 July 1998 Saipan went to the rescue of the motor yacht MY Huntress which was burning approximately southwest of Corfu and east of Nisos Island (sic).

The surface sampler performed seven bearing tests, four trench tests, and 13 impact tests. The total operating time was 18 hours, 22 minutes on 10 separate occasions. Measurements of motor currents and forces applied to the surface were not obtained due to the state of the spacecraft telemetry following landing on the lunar surface. However, estimations were possible.

A finishing operation, shaping, cold works the points on the tooth sides to flats. It might be considered as a side swage. This slightly reduces the tooth width but increases the operating time between "fittings". Swaging is a major advance over filing as the operation is faster, more precise and greatly extends the working life of a saw.

The traditional lower body lift targeted the upper thighs as well as the buttocks and abdomen. For the large volume weight loss patient, this operation is ideal to remove the redundant skin that frequently "hangs" around the lower torso. These operations typically require 5–8 hours operating time when done together. The procedure requires time off from work.

Before the plant was closed, Exelon operated it as a peaking power plant with a capacity factor of up to 10%. As the mid-Maryland region is a summer peaking load, the majority of the plant's operating time was during hot summer days. The Gould Street Generating Station was dispatched by the PJM Interconnection regional transmission organization.

Computers may give a signal to users that an internal standby battery needs replacement. Portable computers using rechargeable batteries generally give the user some indication of the remaining operating time left on the battery. A Smart Battery System uses a controller integrated with an interchangeable battery pack to provide a more accurate indication of the state of battery charge.

Over the next several years, Drs. Weinstein and O'Malley conducted research to demonstrate the efficacy and safety of the TORS technique. They proved the efficacy of the TORS procedures for cancer cure, without the potentially disastrous complications of the established otolaryngological techniques of open surgical resection and conventional endoscopic surgery. TORS afforded cancer cure with less operating time, blood loss, and complication frequency.

On 1 January 1940, the station was initially opened as a pure operational station at the Berlin Outer Freight Ring. Until 1948, no passenger traffic took place here, only when a halt was opened on 26 July. This was initially in operation until 21 March 1951. The second operating time began on 22 May 1955 and ended on 1 June 1958.

This shuttle service between Hütteldorf-Hacking and Unter Purkersdorf existed until May 27, 1972. In 1944, for example, this relation was listed under the stand-alone Kursbuchtabelle 459e, with a rigid 30-minute cycle over the entire operating time. At times, it even drove every 15 minutes. Meanwhile, the Hütteldorf Neulengbach section of the 1952 electrified Westbahn is served by the S50.

By the year 2000, out of 17–20,000 surgeries carried out in India every year, 16-17% were conducted by Shah. He achieved a world record by performing 3,000 knee surgeries in a single centre in the year 2008. In 2012 Shah developed the "zero" technique for TKR, which he claims further reduces the operating time to 7–10 minutes.

Wireless speakers use rechargeable batteries to power them. The operating time of the speaker before it has to be recharged is usually 6 hours. Models with more powerful batteries can last up to 10 hours or more. Almost all wireless speakers operate on rechargeable batteries that are not replaceable, so that the lifespan of these speakers is that of their batteries.

The Fides guide is made of two distinct parts. The first is a reliability prediction calculation method concerning main electronic component families and complete subassemblies like hard disks or LCD displays. The second part is a process control and audit guide which is a tool to assess the reliability quality and technical know-how in the operating time of the studied product, operational specification and maintenance.

The last A-check on the aircraft was performed on 7 November 1981. The last maintenance test of the aircraft took place four days before the accident, on 27 November. The aircraft was powered by two Pratt & Whitney JT8D-217 turbofan engines (numbers P708403D and P708404D), each developing 20,850 pounds of thrust and having a total operating time of 683 hours, recorded since check A-47.

A small minority of lumbar surgical patients will develop a post operative infection. In most cases, this is a bad complication and does not bode well for eventual improvement or future employability. Reports from the surgical literature indicate an infection rate anywhere from 0% to almost 12%. The incidence of infection tends to increase as the complexity of the procedure and operating time increase.

The first UK launderette (alternative spelling: "laundrette") was opened on 9 May 1949 in Queensway (London). UK launderettes are mainly fully automated and coin-operated, and are either manned or unmanned. Some may be manned during fewer hours than the operating time each week. They are generally found only in urban and suburban areas, and have been common features of urban life since the 1960s.

12 smaller Type II U-boats were called up, despite that the Norwegian coast limited their operating time. The operation subsequently disrupted training exercises in the Baltic Sea as six outdated Type IIA training submarines were brought into the North Sea. At this point, commanders and crews were simply ordered into the North Sea. A sealed envelope aboard each of the U-boats held their official orders.

A general or regional anesthetic is most commonly used, as this offers the least interruption by patient movement for microsurgery. Local anesthesia, with or without sedation, can also be used. The procedure is generally done on a “come and go” basis. The actual operating time can range from 1–4 hours, depending on the anatomical complexity, skill of the surgeon and the kind of procedure performed.

All were removed by local police. In 2013, Jokkmokk Iron Mines applied for a permit for Kallak to start a 103 hectare open-cast mine with a production of 10 million tons of iron ore per year and a 14-year operating time. The impacted area, e.g. by roads, the building process and the residuals of the mining is estimated to be up to 1500 ha.

The reactor used very little fuel because its power was so low and it operated only a few hours a day. Some of the fuel rods have been in the reactor for its entire 53 year operating time. The spent fuel does not need cooling because its decay heat power is so low. In addition to the spent fuel, 24 unused fuel rods are stored in the building.

Test button RCDs can be tested with built-in test button to confirm functionality on a regular basis. RCDs may not operate correctly if wired improperly, so they are generally tested by the installer to verify correct operation. Use of a multifunction tester in the EU or a solenoid voltmeter in the USA. This introduces a controlled fault current from live to earth and measures the RCD operating time.

The increased airflow over the engine radiator helped to dump the engine's excess heat into the exhaust stream. However the VRDK was limited to only ten minutes' operating time per sortie, which meant that it was useless weight during the rest of the flight.Gordon and Komissarov, pp. 36–37 Diagram of the I-250's engine installation The I-250 was a low-wing, all-metal aircraft with a monocoque fuselage.

The different surgical techniques are the open and laparoscopic method. The laparoscopic method requires longer operating time but a shorter recovery period with no surgical scar. If it is unnecessary to remove the entire spleen a partial splenectomy may occur; this method preserves some of the immune function while reducing the probability of hypersplenism. Surgeons who chose Laparoscopic splenectomy must administer an appropriate immunization at least two weeks before the surgery.

The "New Regeneration System" NRS process is a process to reduce calcium from beet-root thin-juice. It is used in beet-sugar factories to improve the capacity and operating time of evaporators and to produce soft molasses that can be further de-sugarised with chromatography. The original technology was invented by AKZO for a different application. It was first used in French sugar factories, starting in the 1970s.

In general, preemption means "prior seizure of". When the high priority task at that instance seizes the currently running task, it is known as preemptive scheduling. The term "preemptive multitasking" is sometimes mistakenly used when the intended meaning is more specific, referring instead to the class of scheduling policies known as time-shared scheduling, or time- sharing. Preemptive multitasking allows the computer system to more reliably guarantee each process a regular "slice" of operating time.

An instantaneous over-current relay is an overcurrent relay which has no intentional time delay for operation. The contacts of the relay are closed instantly when the current inside the relay rises beyond the operational value. The time interval between the instant pick-up value and the closing contacts of the relay is very low. It has low operating time and starts operating instantly when the value of current is more than the relay setting.

For example, Mean Time to Failure (MTTF) is measured in terms of three factors: # operating time, # number of on off cycles, # and calendar time. If the restrictions are on operation time or if the focus is on first point for improvement, then one can apply compressed time accelerations to reduce the testing time. If the focus is on calendar time (i.e. if there are predefined deadlines), then intensified stress testing is used.

The use of the Internet to upload logs (allowing quick confirmation of questionable contacts) and for QSLs (formal confirmation) has made the process somewhat easier. Holiday operations from locations where there are few resident operators are often more leisurely affairs. Nonetheless the operator will seek to make as many contacts as possible in the operating time available, with the result that contacts are often extremely brief, limited just to an exchange of signal reports.

Retrieved 2016-06-10. An instrument module in the form of 2 connected truncated cones, weighing , in diameter and in length, carries in most of the auxiliary instrumentation in the hermetized part. Outwardly, ball valves with compressed nitrogen are attached to the gas nozzles of the stabilizer system. At the rear, the TDU-1 braking engine is located at a stroke of 15.83 kN and a maximum operating time of 45 seconds.

For examples: the capacity of an oil refinery may be given in terms of barrels of crude oil refined per day; alternatively chemical plant capacity may be given in tons of product produced per day. In actual daily operation, a plant (or unit) will operate at a percentage of its full capacity. Engineers typically assume 90% operating time for plants which work primarily with fluids, and 80% uptime for plants which primarily work with solids.

ASIMO stands tall and weighs . Research conducted by Honda found that the ideal height for a mobility assistant robot was between 120 cm and the height of an average adult, which is conducive to operating door knobs and light switches. ASIMO is powered by a rechargeable 51.8 V lithium-ion battery with an operating time of one hour. Switching from a nickel metal hydride in 2004 increased the amount of time ASIMO can operate before recharging.

Yutu-2 rover was manufactured in Dongguan, Guangdong province; it is solar-powered, RHU-heated, and it is propelled by six wheels. The rover's nominal operating time is three months, but after the experience with Yutu rover in 2013, the rover design was improved and Chinese engineers are hopeful it will operate for "a few years."China's Chang'e 4 spacecraft to try historic landing on far side of Moon 'between January 1 and 3' . South China Morning Post.

Significant reduction in the flue gas emissions of Fennica and Nordica . Arctia Shipping, 24 October 2011. Retrieved 13 December 2011 While designed according to the power plant principle in which the main generators produce power for all shipboard consumers either directly or through a motor-generator, Nordica has one auxiliary diesel generator that can be used to produce electricity when the ship is at port. The four-cylinder Wärtsilä Vasa 4R22 4-stroke medium-speed diesel engine has an output of at 1,000 rpm. In addition she has a twelve- cylinder Caterpillar 3412 DISA emergency diesel generator with an output of at 1,500 rpm. While underway, the fuel consumption of the main engines is 42 tons of heavy fuel oil or diesel per day at or 30 tons per day at , giving the vessel an operating time of 45 to 67 days depending on the speed. During dynamic positioning operations the fuel consumption is 15 tons per day and the operating time depends on the distance and speed of transit to location.Vessel specification: Nordica.

The MATILDA robot is relatively low-profile and lightweight. It's capable of speeds up to 2 mph (3.22 km/h) and has a payload capacity of 125 pounds (56.7 kg). It can also pull as much as 225 pounds (102.06 kg) or up to 500 pounds (226.8 kg) using an optional four-wheel tactical trailer with remote release. MATILDA is an all weather robot with a 6- to 10-hour extended battery operating time and can climb a 50-degree stair incline.

The line was extended again on 8 February 1913. The railway crossed the Maliko Gorge via a steel bridge to reach Ha'ikū and Kuiaha. The bridge was with a height of 230 ft (70 m) above the valley floor the highest railway bridge in Hawaii, and had a length of 682 ft (208 m). The railway was from 1959, the last public railway in the state of Hawai'i and after a total of almost 87 years, the organisation with the longest operating time.

In the spring of 2000, it had round trips between Amakusa Islands and Kumamoto twice a day. Starting from December 1, 2005, the operating time was extended from (8:00 am ～ 7:00 pm) to (7:40 am ～ 8:30 pm). It now has three round trips between Amakusa Airfield and Fukuoka Airport and one round trip between Amakusa Airfield and Kumamoto Airport (also one round trip between Kumamoto Airport and Kobe Airport) per day while using the same aircraft (aircraft registration number JA81AM).

Transient conditions occur in a pipeline for example at start-up, if the pressure at inlet or outlet changes (even if the change is small), and when a batch changes, or when multiple products are in the pipeline. Gas pipelines are almost always in transient conditions, because gases are very compressible. Even in liquid pipelines, transient effects cannot be disregarded most of the time. LDS should allow for detection of leaks for both conditions to provide leak detection during the entire operating time of the pipeline.

A point in a Ragone plot represents a particular energy device or technology. The amount of time (in hours) during which a device can be operated at its rated power is given as the ratio between the specific energy (X-axis) and the specific power (Y-axis). This is true regardless of the overall scale of the device, since a larger device would have proportional increases in both power and energy. Consequently, the iso curves (constant operating time) in a Ragone plot are straight lines.

The rapid development of other shipbuilding companies pledged Philadelphia to improve production processes. It was the first shipyard in the world which used floating dry docks in the building process to improve an operating time of the ships. After the advent of ironclad warships made the site obsolete, new facilities were built in 1871 on League Island at the confluence of the Delaware and Schuylkill rivers. From early in the nineteenth century many Philadelphia workers agitated for a reduction in the arduous twelve hour workday.

The turbine is scheduled to produce power for five years, though Marine Current Turbines were reported to have asked for an extension beyond their 2013 contract. By March 2010, the turbine had passed an operating time of over 1,000 hours - a first for any marine energy device. Impact to the environment was closely scrutinised. The device, built in Belfast's famous Harland and Wolff shipyard, is rigged with a sonar device which stops the motion of the rotor blades when it detects marine lifeform near it.

In 1998 KBKhA has studied and determined the possibility of using the RD-0124 (the RD-0124A) for the second stage of space rocket complex "Angara", created by Khrunichev Design and Research center and aimed for orbiting multiple purpose space vehicles. The main differences from the requirements to base engine are the change of engine operating time of the main and final thrust stage. On December 1, 2007, 150 fire tests were performed, with overall development time over 30,000 seconds, which confirmed the compliance of main parameters with Technical Task requirements.

S-Bahn train in Altglienicke station Shortly after the opening of the line, it was operated with two S-Bahn train groups, that is two trains per direction at 20-minute intervals. In 1962, the Bernau – central Schönefeld airport train group (running during the whole operating day) and the Friedrichstrasse – Schönefeld train group (not running during the evening) served the line. A few years later, the latter train group operated during the entire operating time to/from the Berlin Stadtbahn. Since then, it has been the main train group on the line.

The echo of the sweet songs by the "kuadias" कुआडिया( two men operating the well) at 4 AM were used to be very refreshing and enlightening. In the evening, operating time of the well was very lively and entertaining. Both of the elders and the youth would gather in the "Guaad" गुआड़(courtyard in the common land); overtly gossiping and discussing village news. But their main attraction would be the "Paniharins" पनिहारीं (the newly wed brides in a flock along with their young sisters-in-law going to fetch water from the well).

The most straightforward way to quantify fairly uniform fouling is by stating the average deposit surface loading, i.e., kg of deposit per m2 of surface area. The fouling rate will then be expressed in kg/m2s, and it is obtained by dividing the deposit surface loading by the effective operating time. The normalized fouling rate (also in kg/m2s) will additionally account for the concentration of the foulant in the process fluid (kg/kg) during preceding operations, and is useful for comparison of fouling rates between different systems.

Lindbergh sat in a cramped cockpit which was 94 cm wide, 81 cm long and 130 cm high (36 in × 32 in × 51 in). The cockpit was so small, Lindbergh could not stretch his legs. The Spirit of St. Louis was powered by a , air-cooled, nine-cylinder Wright J-5C Whirlwind radial engine. The engine was rated for a maximum operating time of 9,000 hours (more than one year if operated continuously), and had a special mechanism that could keep it clean for the entire New York-to-Paris flight.

System architecture allows for UAVs of different classes to be incorporated into one system INDELA-SKY, including UAVs of other manufacturers. Several GCS can be united in a single information network, what allows for automatic data exchange and coordination of operators' activity. Ground control station is equipped with life-support system, consisting of air conditioner, heating unit, uninterruptable power supply, petrol generator, and ventilation unit with the possibility to purify intake air from coarse dust, chemical and radioactive substances. Operating time in autonomous mode is 24 hours, in noiseless mode from accumulators – 5 hours.

An osteotomy is a surgical intervention that consists of cutting through bone and repositioning the resulting fragments in the correct anatomical place. To insure optimal repositioning of the bony structures by osteotomy, the intervention can be planned in advance and simulated. The surgical simulation is a key factor in reducing the actual operating time. Often, during this kind of operation, the surgical access to the bone segments is very limited by the presence of the soft tissues: muscles, fat tissue and skin - thus, the correct anatomical repositioning is very difficult to assess, or even impossible.

Due to the longer operating time per year, a greater number of colliding ion species and collision energies can be studied at RHIC. In addition and unlike the LHC, RHIC is also able to accelerate spin polarized protons, which would leave RHIC as the world's highest energy accelerator for studying spin- polarized proton structure. A major upgrade is the Electron-Ion Collider (EIC), the addition of a 18 GeV high intensity electron beam facility, allowing electron-ion collisions. At least one new detector will have to be built to study the collisions.

A re-injection well (LA-7) exists as well. Several events (in particular corrosion, but also hydrothermal blockages, leakages, lack of operation knowledge of the plant personnel) led to several drops in the power generation capabilities several times between 1998 and 2018, followed by extensive repairs and rehabilitation works addressing in particular corrosion damages. The pilot power plant was out of operation for most of its existence. For most of the operating time, only the conventional combined cycle unit was operational (with only the two wells LA-3 & LA-6 operating).

In 1995, Day founded Cambie Surgery Centre, a for-profit Vancouver clinic. Day is the facility's medical director, and one of its 40-plus shareholders. The Cambie Surgery Centre has 50 full- and part-time nurses and 125 doctors performing operations and other procedures for up to 5,000 patients a year which may be the busiest private hospital in Canada. Day has said he decided to set up the Cambie Surgical Centre, which is non-union, after government funding decreased in the mid-90s cut his operating time at UBC from 17 hours a week to about six.

In the test by UL (safety organization), a Garmin Golf GPS using Batteroo Boost was shown to have a lifespan of 10 hours and 12 minutes, in contrast to the 1 hour and 43 minutes of operating time without a Batteroo Boost. However, later the test was independently duplicated by TechnologyCatalyst to demonstrate that Garmin runs OK for over 17 hours on ordinary AA batteries, and the report by UL was based on the sloppy test design. PC World's Jon Phillips demoed the Batteroo Boost operating on batteries in an Apple Inc. keyboard that he claimed were dead.

Conditional short-circuit current is the value of the alternating current component of a prospective current, which a switch without integral short- circuit protection, but protected by a suitable short circuit protective device (SCPD) in series, can withstand for the operating time of the current under specified test conditions. It may be understood to be the RMS value of the maximum permissible current over a specified time interval (t0,t1) and operating conditions. The IECIEC 62314-1, The International Standard on Solid- State Relays, Ed 1, Section 3.1.11 definition is critiqued to be open to interpretation.

Drawbar force gauges are able to detect broken or weakening components of the drawbar clamping system, can give indications that the unit needs lubrication, detect gripper mis- adjustment, or demonstrate that the incorrect retention knob is being used for the machine. A retention knob is a device screwed into the narrow end of a tool holder, enabling the drawbar to pull the tool holder into the spindle. With a highly accurate electronic gauge, deficiencies can be noted and corrected. Many hours of expensive machine operating time can be put to use while avoiding fretting, chatter, "stuck" tool holders in a spindle, etc.

Those Danube Swabians who remained in the region had their citizenships and all civil rights revoked by the AVNOJ decrees of 1943 and 1944 issued by the Yugoslav communists and were sent to local communist prison camps. One of these camps was located in Knićanin and internees in this camp mostly originated from central and southern Banat. The average number of people inside prison camp was 17,200, while the largest number was 20,500 and altogether there were about 33,000 prisoners. The camp operated from 10 October 1945 until middle of March 1948 (total operating time was 29 months or 880 days).

The airplane, a McDonnell Douglas DC-10-10 (registration ), was delivered in 1971 and owned by United Airlines since then. Before departure on the flight from Denver on July 19, 1989, the airplane had been operated for a total of 43,401 hours and 16,997 cycles (a takeoff and subsequent landing is considered an aircraft cycle). The airplane was powered by CF6-6D high bypass- ratio turbofan engines produced by General Electric Aircraft Engines (GEAE). The aircraft's No. 2 (tail-mounted) engine had accumulated 42,436 hours and 16,899 cycles of operating time immediately prior to the accident flight.

Joel-Cohen incision has lower rates of fever, hospital stay, post-operative pain and blood loss compared to Pfannenstiel incision. The operating time and use of analgesia are also less. Additionally, the time needed to get out of bed, walk without support and time for re-appearance of audible intestinal sounds were shorter in Joel-Cohen group than the Pfannenstiel group in a study conducted with 153 women. In the two studies (with 411 participants) that compared the Joel-Cohen incision with the Pfannenstiel incision, the Joel-Cohen incision was associated with a 65% reduction in postoperative febrile morbidity.

The Vulcain is a gas-generator cycle rocket engine fed with cryogenic liquid oxygen and liquid hydrogen. It features regenerative cooling through a tube wall design, and the Vulcain 2 introduced a particular film cooling for the lower part of the nozzle, where exhaust gas from the turbine is re-injected in the engine. It powers the first stage of the Ariane 5 launcher, the EPC (Étage Principal Cryotechnique, main cryogenic stage) and provide 8% of the total lift-off thrust (the rest being provided by the two solid rocket boosters). The engine operating time is 600 s in both configurations.

Consequently, these units were built when labor costs were significantly less than in the 1990s, and they avoided major investments in pollution control equipment. In the 1990s, these units were often among the least expensive of any operated by their respective owners, in terms of cost per megawatt-hour of energy produced. Compared to other plants on a utility company system, these units provided incentives for their owners to maximize operating time, minimize downtime for repairs or retrofit, and minimize further capital investments in them. Because capital in such plants is typically amortized over 20–30 years, investments in most of them were fully recovered by 1995.

On November 20, 1967, TWA Flight 128 was operated using a Convair 880 narrow-body jet airliner (registration number N821TW). The Convair was manufactured in December 1960 and placed in service by TWA in January 1961. It had accumulated a total of 18,850 hours of operating time prior to the accident flight. While various maintenance writeups had occurred and been cleared in accordance with existing maintenance procedures, in no case were both the captain's and first officer's altimeters reported malfunctioning at the same time. The flight's captain, 45-year-old Charles L. Cochran, had accumulated 12,895 hours of flight time, including 1,390 hours in the Convair 880.

Early intervention has other advantages including reduced number of visits to the emergency department, fewer conversions to an open surgery, less operating time required, and reduced time in hospital post operatively. The Swedish agency SBU estimated in 2017 that increasing acute phase surgeries could free multiple in-hospital days per patient and would additionally spare pain and suffering in wait of receiving an operation. The report found that those with acute inflammation of the gallbladder can be surgically treated in the acute phase, within a few days of symptom debut, without increasing the risk for complications (compared to when the surgery is done later in an asymptomatic stage).

Advertisement placed January 6, 1902 for steamer service to points on the Willamette and Yamhill rivers, including McMinnville, which would have required use of the Yamhill lock. On September 24, 1900, the steamer Bonita (later renamed Metlako), became the first steamboat to transit the lock. From the formal opening to navigation on September 24, 1900 to the end of the fiscal year, on June 30, 1901, the lock was in operation for 202 days and closed, because of high water, for 78 days. There were 225 lockages. Total operating time was 67 hours and 32 minutes. Total registered tons transiting the locks was 38,967.

CAS starts with the premise of a much better visualization of the operative field, thus allowing a more accurate preoperative diagnostic and a well-defined surgical planning, by using surgical planning in a preoperative virtual environment. This way, the surgeon can easily assess most of the surgical difficulties and risks and have a clear idea about how to optimize the surgical approach and decrease surgical morbidity. During the operation, the computer guidance improves the geometrical accuracy of the surgical gestures and also reduce the redundancy of the surgeon’s acts. This significantly improves ergonomy in the operating theatre, decreases the risk of surgical errors and reduces the operating time.

Bramah's concept of "loaded pistons" was introduced in 1850, when the first hydraulic accumulator was installed as part of a scheme for cranes for the Manchester, Sheffield and Lincolnshire Railway. A scheme for cranes at Paddington the following year specified an accumulator with a piston and a stroke of , which enabled pressures of to be achieved. Compared to the of the Newcastle scheme, this increased pressure significantly reduced the volumes of water used. Cranes were not the only application, and hydraulic operation of the dock gates at Swansea reduced the operating time from 15 to two minutes, and the number of men required to operate them from twelve to four.

In the freight segment, IR ferries various commodities and fuels in industrial, consumer, and agricultural segments across the length and breadth of India. IR has historically subsidised the passenger segment with income from the freight business. As a result, freight services are unable to compete with other modes of transport on both cost and speed of delivery, leading to continuous erosion of market share. To counter this downward trend, IR has started new initiatives in freight segments including upgrading of existing goods sheds, attracting private capital to build multi-commodity multi-modal logistics terminals, changing container sizes, operating time-tabled freight trains, and tweaking with the freight pricing/product mix.

In recent years there has been an increasing uptake in the use of barbed sutures, particularly in minimally invasive and laparoscopic procedures where they may reduce operating time and improve surgical efficiency. However, little is known about the adverse events associated with these new materials and concerns have arisen regarding their safety in certain procedures. Although barbed sutures provide an attractive means to allow easier and faster laparoscopic suturing, they should be used carefully in inframesocolic surgery and the suture end cut and buried to avoid inadvertent attachment to the small bowel or its mesentery. which may lead to small bowel obstruction presenting in the early postoperative period.

It was the job of a ship's page to turn the hourglasses and thus provide the times for the ship's log. Noon was the reference time for navigation, which did not depend on the glass, as the sun would be at its zenith. A number of sandglasses could be fixed in a common frame, each with a different operating time, e.g. as in a four-way Italian sandglass likely from the 17th century, in the collections of the Science Museum, in South Kensington, London, which could measure intervals of quarter, half, three- quarters, and one hour (and which were also used in churches, for priests and ministers to measure lengths of sermons).

The auxiliary engine is coupled with five generators to operate at different speeds: Two Metadyn machines in tandem with a flywheel (which is used to store energy during the acceleration and deceleration of the turret) for the power of the elevation and traverse drives, two 380-Hz three-phase generators with a capacity of 20 kVA for the ventilation, fire control and radar systems, and a 300-A 28-volt direct current generator for the electrical system. The fuel capacity is 985 liters, which ensures a combined operating time of approximately 48 hours. The chassis and the track were taken directly from the Leopard 1. It has torsion bar spring mounted roadwheels with seven roadwheel pairs per side.

This, along with the long-life light emitting diode which does not burn out like an incandescent bulb, give the flashlight a long lifetime, making it a useful emergency light. A disadvantage of many current models is that the supercapacitor cannot store much energy in comparison to a lithium-ion cell, limiting the operating time per charge. In most designs, vigorously shaking the light for about 30 seconds may provide up to 5 minutes of light, though the advertised time omits the reduced output of the LED after 2 or 3 minutes. Shaking the unit for 10 to 15 seconds every 2 or 3 minutes as necessary permits the device to be used continuously.

The cruise stage included two gallium arsenide solar arrays to power the radio system and maintain power to the batteries in the lander, which kept certain electronics warm. After descending to the surface, the lander was to deploy two 3.6-meter-wide gallium arsenide solar arrays, located on either side of the spacecraft. Another two auxiliary solar arrays were located on the side to provide additional power for a total of an expected 200 watts and approximately eight to nine hours of operating time per day. While the Sun would not have set below the horizon during the primary mission, too little light would have reached the solar arrays to remain warm enough for certain electronics to continue functioning.

The Car Carrier freight train In the freight segment, IR ferries various commodities and fuels in industrial, consumer, and agricultural segments across the length and breadth of India. IR has historically subsidised the passenger segment with income from the freight business. As a result, freight services are unable to compete with other modes of transport on both cost and speed of delivery, leading to continuous erosion of market share. To counter this downward trend, IR has started new initiatives in freight segments including upgrading of existing goods sheds, attracting private capital to build multi- commodity multi-modal logistics terminals, changing container sizes, operating time-tabled freight trains, and tweaking with the freight pricing/product mix.

In the 1970s a group of American surgeons wrote urging that the procedure was too dangerous and should be abandoned. Since then outcomes in larger centers have improved considerably, and mortality from the operation is often less than 4%. In 2006 a report was published of a series of 1,000 consecutive pancreatico- duodenectomies performed by a single surgeon from Johns Hopkins Hospital between 1969 and 2003. The rate of these operations had increased steadily over this period, with only three of them before 1980, and the median operating time reduced from 8.8 hours in the 1970s to 5.5 hours in the 2000s, and mortality within 30 days or in hospital was only 1%.

4th Tank Regiment Ariete tanks in Latvia 2019 During the first years of adoption, the Ariete MBT showed some deficiencies regarding the powerplant. While the original V12 1,250 hp FIAT-Iveco MTCA (Modular Turbo- Charged Aftercooler) was a coupling of two of the V6 engines used by several Italian Army vehicles such as the Centauro tank destroyer and the Dardo IFV, it produced less power than the most advanced contemporary western designs. The Ariete's engine had to run at a high RPM to perform well, thus reducing the operating time between failures. Moreover, to retain a good power-to- weight ratio, the total weight of the tank had to be kept below 60 tonnes.

As a result, time-consuming tasks may render some quantum algorithms inoperable, as maintaining the state of qubits for a long enough duration will eventually corrupt the superpositions. These issues are more difficult for optical approaches as the timescales are orders of magnitude shorter and an often-cited approach to overcoming them is optical pulse shaping. Error rates are typically proportional to the ratio of operating time to decoherence time, hence any operation must be completed much more quickly than the decoherence time. As described in the Quantum threshold theorem, if the error rate is small enough, it is thought to be possible to use quantum error correction to suppress errors and decoherence.

The Car Carrier freight train In the freight segment, IR ferries various commodities and fuels in industrial, consumer, and agricultural segments across the length and breadth of India. IR has historically subsidised the passenger segment with income from the freight business. As a result, freight services are unable to compete with other modes of transport on both cost and speed of delivery, leading to continuous erosion of market share. To counter this downward trend, IR has started new initiatives in freight segments including upgrading of existing goods sheds, attracting private capital to build multi-commodity multi-modal logistics terminals, changing container sizes, operating time- tabled freight trains, and tweaking with the freight pricing/product mix.

Preemptive multitasking allows the computer system to more reliably guarantee to each process a regular "slice" of operating time. It also allows the system to deal rapidly with important external events like incoming data, which might require the immediate attention of one or another process. Operating systems were developed to take advantage of these hardware capabilities and run multiple processes preemptively. Preemptive multitasking was implemented in the PDP-6 Monitor and MULTICS in 1964, in OS/360 MFT in 1967, and in Unix in 1969, and was available in some operating systems for computers as small as DEC's PDP-8; it is a core feature of all Unix-like operating systems, such as Linux, Solaris and BSD with its derivatives, as well as modern versions of Windows.

One of the San Francisco-based ACVs was showcased by the Coast Guard at the U.S. International Transportation Exposition at Dulles International Airport in 1972, where it was inspected by tens of thousands of international visitors. Over the first two years of evaluation, the Coast Guard ACVs accrued over 1,500 hours of operating time. As part of the evaluation, the ACV at Point Barrow was transferred to Traverse City, Michigan for refurbishment and then stationed at St. Ignace Coast Guard Station on Lake Huron. It sank on 23 November 1971 after only 26 hours of operation in Lake Huron, after the cabin was breached by a rock and the engine inexplicably failed, leading the craft to take on water and sink.

This diesel engine is rated at 350 kW and is Stage IIIB compliant; it produced lower emissions, as well as a considerable reduction in noise, in comparison to conventional diesel traction. According to Laug, Director of Production at DB Regio Franken in Nürnberg, the emissions are reduced by 70 per cent, while fuel consumption has also been cut by 50 per cent less to the traditional shunting locomotives, saving only 400 tons of CO₂ per year. Reportedly, DB operates their fleet on pure battery running for between 50 and 75 percent of their overall operating time. Since November 2016, a small fleet of five Alstom H3 hybrid locomotives have been deployed at railway stations of Nuremberg Central Station and Würzburg Hauptbahnhof.

As of November 7, 2010, the Large Hadron Collider (LHC) has collided heavy ions of lead at higher energies than RHIC. The LHC operating time for ions (lead-lead and lead-proton collisions) is limited to about one month per year. In 2010, RHIC physicists published results of temperature measurements from earlier experiments which concluded that temperatures in excess of 345 MeV (4 terakelvins or 7 trillion degrees Fahrenheit) had been achieved in gold ion collisions, and that these collision temperatures resulted in the breakdown of "normal matter" and the creation of a liquid-like quark–gluon plasma. In January 2020, the US Department of Energy Office of Science selected the eRHIC design for the future Electron–ion collider (EIC), building on the existing RHIC facility at BNL.

For aircraft susceptible to such an occurrence, pilots must take care to achieve a firm position on the ground before applying reverse thrust. If applied before the nose-wheel is in contact with the ground, there is a chance of asymmetric deployment causing an uncontrollable yaw towards the side of higher thrust, as steering the aircraft with the nose wheel is the only way to maintain control of the direction of travel in this situation. Reverse thrust mode is used only for a fraction of aircraft operating time but affects it greatly in terms of design, weight, maintenance, performance, and cost. Penalties are significant but necessary since it provides stopping force for added safety margins, directional control during landing rolls, and aids in rejected take-offs and ground operations on contaminated runways where normal braking effectiveness is diminished.

Acting as a technology demonstrator, it serves to help to drive innovation in vertical flight for the company. In 2016, it was noted that the active blade control system developed for Project Zero, which removes the need for a swash plate and a separate vibration-damping system, was to undergo flight testing on an AgustaWestland AW139; separately, the flight control laws used by Project Zero shall be used for a future tiltrotor project by AgustaWestland. Various alternative propulsion arrangements for Project Zero have been envisioned by the Advanced Concepts Group, including hybrid diesel propulsion, the incorporation of fuel cells, and other unspecified technologies. In its original configuration, ten minutes flight time is the current operational limit; speaking in 2016, Wang stated that he is hopeful that battery technology will advance within a decade to support a 100-minute operating time.

In addition to this, Google Trends signaled an increasing number of Internet searches indicating how Japanese purchasers found various problems with Vaio laptops. A worsening of the situation occurred when, officially due to a software bug, it came to light that many Bravia televisions were predisposed with an operating time of about 1200 hours before they stopped functioning; Stranger still was the fact that, used for a period of about 3 hours a day, such televisions would stop working exactly after warranty expired. The Tokyo company denied any direct responsibility and announced to release software patches as a solution, desperately trying to limit the rumors about the problem before they spread to Europe, where the company's presence was very strong, and admitting: "Our products are not designed to work badly". However, the Sony timer legend had already spread widely across the World Wide Web, becoming part of the Internet culture itself.

The components of any turbine engine — the gas compressor, the combustion chamber, and the turbine rotor — are fabricated from etched silicon, much like integrated circuits. The technology holds the promise of ten times the operating time of a battery of the same weight as the micropower unit, and similar efficiency to large utility gas turbines. Researchers at Massachusetts Institute of Technology have thus far succeeded in fabricating the parts for such a micro turbine out of six etched and stacked silicon wafers, and are working toward combining them into a functioning engine about the size of a U.S. quarter coin. "Engine on a chip promises to best the battery," ScienceDaily, viewed 9/20/2006 Researchers at Georgia Tech have built a micro generator 10 mm wide, which spins a magnet above an array of coils fabricated on a silicon chip. The device spins at 100,000 revolutions per minute, and produces 1.1 watts of electrical power, sufficient to operate a cell phone.

All used joystick controls in a V shaped arrangement that were centered under tachometer. Specifications from the sales brochure for the Kristi KT3 stated that it was 11' long, 7'4" wide and had a height of 5'9" with an empty weight of 2095 pounds. The KT3 was configured for 5 passengers and imparted 0.46 PSI of pressure onto the snow. It had a maximum cargo/passenger capacity of 1,500 pounds and a towing capacity of 2000 pounds. With a fuel capacity of 20 gallons of gasoline, it claims 15 to 18 hours of operating time and a top speed of 20 mph. The KT3 sales brochure claimed the ability to climb a 100% grade with full load when not on the snow. It claimed the ability to climb a 70% grade in snow conditions with a full load and in soft snow it claims the ability to traverse a side slope with a 60% grade. The Kristi action adjustable track suspension will hold the cabin level on slopes with up to a 25% grade.

The Boeing 727-22C aircraft, registration was almost new and had been delivered to United Airlines only four months earlier. It had less than 1100 hours of operating time. The aircraft had had a nonfunctional #3 generator for the past several days leading up to the accident. Per standard procedure, the crew placed masking tape over the switches and warning lights for the generator. Approximately two minutes after takeoff, the crew reported a fire warning on engine #1 and shut it off. The crew radioed to departure control that they only had one functioning generator and needed to come back to the airport, but it turned out to be their last communication, with subsequent attempts to contact Flight 266 proving unsuccessful. Shortly after engine #1 shut down, the #2 generator also ceased operating for reasons unknown. The NTSB was unable to determine why the #2 generator had failed after it had become the plane's sole power source, nor why the "standby electrical system either was not activated or failed to function." Several witnesses saw Flight 266 take off and reported seeing sparks emanating from either engine #1 or the rear of the fuselage, while others claimed an engine was on fire.