"The water here is salty and moves upwards because of capillary action, causing the base of the wall to weaken," said Anil Kumar Tak, Bharatpur's superintendent of police.
|
|
The bank, 55.6 percent owned by state fund Investment Corp, should benefit in 2018 as loan pricing moves upwards as a result of higher interest rates and as the UAE economic growth rate accelerates.
|
|
Neutral trading strategies that are bullish on volatility profit when the underlying stock price experiences big moves upwards or downwards. They include the long straddle, long strangle, long condor (Iron Condor), long butterfly, and long Calendar.
|
|
Diaphragmatic paradox or paradoxical diaphragm phenomenon is an abnormal medical sign observed during respiration, in which the diaphragm moves opposite to the normal directions of its movements. The diaphragm normally moves downwards during inspiration and upwards during expiration. But in diaphragmatic paradox, it moves upwards during inspiration and downwards during expiration.
|
|
The ear develops in the lower neck region and moves upwards as the mandible develops. Unlike structures of the inner and middle ear, which develop from pharyngeal pouches, the ear canal originates from the dorsal portion of the first pharyngeal cleft. It is fully expanded by the end of the 18th week of development. The eardrum is made up of three layers (ectoderm, endoderm and connective tissue).
|
|
Johansson mikrokator A metallic strip is twisted and fixed between two ends as shown. Any longitudinal movement (in either direction) will cause the central portion of the strip to rotate. One end of the strip is fixed to an adjustable cantilever and the other end is fixed to the spring elbow. The spring elbow, in turn, is connected to a plunger, which moves upwards or downwards.
|
|
If the valve body is filled with water, the float moves upwards and closes the valve. If air collects in the valve body, the waterline lowers, as does the float, and the valve opens to release it. To give more sealing force on the valve, the float generally works the valve through a lever. A greater movement of the float gives a shorter, but more forceful, movement of the valve.
|
|
In 1941 he studied modern architecture under the architect Stanislas Jasinski. He developed plans for a museum where light comes gradually from above as one moves upwards in the building. The plans were not executed, but used the same ideas as those that gave birth to the Guggenheim Museum in New York City. During World War II, he returned to work as a photographer to avoid working as an architect for the Germans.
|
|
As the video progresses, Roberts interacts with buildings and objects, such as New York style newspaper dispensers and following this her entire body has effects placed upon it as she changes color and shades and the last frames of the video show more of the same effects and finally shows a frame of a New York street with Roberts walking out of the frame before the camera moves upwards to show a purple sky.
|
|
The rope is "taken-in", to clear up the slack as the climber moves upwards, so in the event of a fall, the climber falls the shortest distance possible. The length of a fall is normally no more than a meter, but can vary depending on the length of the route (the longer the rope, the more stretch the rope will undergo when weighted) and the weight of the climber compared to that of the belayer, among other things.
|
|
The last scenes are that of Feist dancing with her scarf, and the video ends. The second video starts off with scenes of her bare feet in a town (which is not Mushaboom but Prague, Czech Republic),Jason Pirodsky, 50 Music Videos Shot in Prague, Expats.cz, July 24, 2014 with people sitting around on top of cars and walking about in the street. The camera moves upwards through the window of an apartment, where Feist is shown sleeping.
|
|
The exhaust stroke is the final phase in a four stroke engine. In this phase, the piston moves upwards, squeezing out the gasses that were created during the combustion stroke. The gasses exit the cylinder through an exhaust valve at the top of the cylinder. At the end of this phase, the exhaust valve closes and the intake valve opens, which then closes to allow a fresh air/fuel mixture into the cylinder so the process can repeat itself.
|
|
The relay piston moves upwards and the throttle valve spindle ascend upwards opening the valve. The variation of the steam consumption rate ṁ (kg/h) with the turbine load during throttle governing is linear and is given by the “willan’s line”. The equation for the willan’s line is given by: ::ṁ=aL+C Where a is the steam rate in kg/kWh, 'L' is the load on turbine in KW and C is no load steam consumption.
|
|
As the piston initially moves upwards in what is traditionally the compression stroke, the charge is partially expelled back out through the still-open intake valve. Typically, this loss of charge air would result in a loss of power. However, in the Miller cycle, this is compensated for by the use of a supercharger. The supercharger typically will need to be of the positive-displacement (Roots or screw) type due to its ability to produce boost at relatively low engine speeds.
|
|
As more vapour is formed, the centre of the tube will have a higher velocity which forces the remaining liquid against the tube wall forming a thin film which moves upwards. This phenomenon of the rising film gives the evaporator its name. Applications: There is a wide range of applications for rising tube evaporators, including effluent treatment, production of polymers, food production, thermal desalination, pharmaceuticals, and solvent recovery. Aschner, F.S. & Schaal, M. & Hasson, D. (1971). “Large Long-Tube Evaporators for Seawater Distillation.
|
|
Many two-stroke engines use a crankcase-compression design, where a partial vacuum draws the fuel/air mixture into the engine as the piston moves upwards. Then as the piston travels downward, the inlet port is uncovered and the compressed fuel/air mixture is pushed from the crankcase into the combustion chamber. Crankcase-compression designs are often used in small petrol (gasoline) engines for motorcycles, generator sets and garden equipment. This design has also been used in some small diesel engines, however it is less common.
|
|
The black scabbardfish is bathypelagic by day, but moves upwards in the water column at night to feed at middle depths on crustaceans, cephalopods, and other fishes, mostly grenadiers, codlings (family Moridae) and naked heads (family Alepocephalidae). The black scabbardfish coexists spatially with Aphanopus intermedius, which is a species commonly known as the intermediate scabbardfish. The narrow, elongated body of the black scabbardfish, along with its pointed head and long dorsal fin, is adapted for fast swimming. This fish has a large terminal mouth with large fang-like teeth for efficient predation.
|
|
The current version of the D-Shape 3-D printer sits in a 6m by 6m aluminum frame. The frame consists of a square base that moves upwards along four vertical beams during the printing process via stepper motors, which are used to repeatedly move a specified length and then hold in place, on each beam. Spanning the entire horizontal 6m of the base is a printer head with 300 nozzles, each spaced 20mm apart. The printer head is connected to the base by an aluminum beam that runs perpendicular to the printer head.
|
|
By contrast, warm air becomes less dense and moves upwards (atmospheric convection). Subsidence generally creates a high-pressure area as more air moves into the same space: the polar highs are areas of almost constant subsidence, as are the horse latitudes, and the areas of subsidence are the sources of much of the world's prevailing winds. Subsidence also causes many smaller-scale weather phenomena, such as morning fog. An extreme form of subsidence is a downburst, which can result in damage similar to that produced by a tornado.
|
|
As the Soldat community has grown, so has the popularity of the sub-gamemode Realistic (often abbreviated "R" or "R-mode"). Realistic makes the game have more realistic characteristics to it; the weapons are more powerful and they have recoil (the cross-hair moves upwards with each successive shot), there's a realistic field of view and players sustain greater damage when they hit the ground at high speeds. This mode emphasizes the need for proper tactics more strongly than the standard game mode, sometimes regarded as requiring more skill.
|
|
The film begins with footsteps leading to a pond. The camera continually moves upwards to show the flight of butterflies, birds, and a progression of historical aircraft ending with a rocket ship travelling through space and landing on the Moon. The astronaut/cosmonaut leaves his spacecraft and sights other footsteps on the Moon leading him to an old phonograph, then a crashed rocket with a plaque reading Jules Verne's From the Earth to the Moon. Taken to a dinner table, the surprised space traveller meets the characters from Verne's book and Baron Munchausen.
|
|
The gravitational redshift of a light wave as it moves upwards against a gravitational field (produced by the yellow star below). The effect is greatly exaggerated in this diagram. In Einstein's general theory of relativity, the gravitational redshift is the phenomenon that clocks deeper in a gravitational well tick slower when observed from outside the well. More specifically the term refers to the shift of wavelength of a photon to longer wavelength (the red side in an optical spectrum) when observed from a point at a higher gravitational potential.
|
|
Above ground symptoms are usually not seen, although heavily infected plants are often weaker, smaller and can have curled or discolored leaves. Symptoms of Ditylenchus destructor on the bulbs of flowering plants such as irises and tulips are similar to those of potatoes, except infection usually occurs at the bulb’s base and moves upwards. The fleshy scales develop discolored yellow to black lesions, the roots become blackened, and leaves can develop yellow tips. Potato rot nematodes in groundnuts, such as peanuts, develop blackened hulls, shrunken kernels, and embryos with a brown discoloration.
|
|
A recreational wind tunnel enables human beings to experience the sensation of flight without planes or parachutes, through the force of wind being generated vertically. Air moves upwards at approximately 195 km/h (120 mph or 55 m/s), the terminal velocity of a falling human body belly-downwards. A vertical wind tunnel is frequently called 'indoor skydiving' due to the popularity of vertical wind tunnels among skydivers, who report that the sensation is extremely similar to skydiving. The human body 'floats' in midair in a vertical wind tunnel, replicating the physics of 'body flight' or 'bodyflight' experienced during freefall.
|
|
At one point, more than 1,000 Cuban soldiers were moved to a remote location to shoot one scene—this despite the then-ongoing Cuban Missile Crisis. In another scene, the camera follows a flag over a body, held high on a stretcher, along a crowded street. Then it stops and slowly moves upwards for at least four storeys until it is filming the flagged body from above a building. Without stopping, it then starts tracking sideways and enters through a window into a cigar factory, then goes straight towards a rear window where the cigar workers are watching the procession.
|
|
In 1907, Einstein was still eight years away from completing the general theory of relativity. Nonetheless, he was able to make a number of novel, testable predictions that were based on his starting point for developing his new theory: the equivalence principle.More specifically, Einstein's calculations, which are described in chapter 11b of , use the equivalence principle, the equivalence of gravity and inertial forces, and the results of special relativity for the propagation of light and for accelerated observers (the latter by considering, at each moment, the instantaneous inertial frame of reference associated with such an accelerated observer). The gravitational redshift of a light wave as it moves upwards against a gravitational field (caused by the yellow star below).
|
|
The dakuten or ten ten, which represents voicing, becomes a sideways motion; the handakuten or maru, used for the consonant p, moves upwards, small kana and silent w move inwards, and long vowels move downwards. That is, the voiced consonants are produced by moving the sign for the syllable with the corresponding unvoiced consonant to the side. (That is, to the right if signing with the right hand.) The manual kana ga, gi, gu, ge, go are derived this way from ka, ki, ku, ke, ko; likewise, those starting with z, d, b are derived from the s, t, h kana. The p kana are derived from the h kana by moving them upwards.
|
|
A common example of natural convection is the rise of smoke from a fire. It can be seen in a pot of boiling water in which the hot and less-dense water on the bottom layer moves upwards in plumes, and the cool and more dense water near the top of the pot likewise sinks. Natural convection will be more likely and more rapid with a greater variation in density between the two fluids, a larger acceleration due to gravity that drives the convection or a larger distance through the convecting medium. Natural convection will be less likely and less rapid with more rapid diffusion (thereby diffusing away the thermal gradient that is causing the convection) or a more viscous (sticky) fluid.
|
|
The gravitational redshift of a light wave as it moves upwards against a gravitational field (caused by the yellow star below). Einstein predicted the gravitational redshift of light from the equivalence principle in 1907, and it was predicted that this effect might be measured in the spectral lines of a white dwarf star, which has a very high gravitational field. Initial attempts to measure the gravitational redshift of the spectrum of Sirius-B, were done by Walter Sydney Adams in 1925, but the result was criticized as being unusable due to the contamination from light from the (much brighter) primary star, Sirius.Hetherington, N. S., "Sirius B and the gravitational redshift - an historical review", Quarterly Journal Royal Astronomical Society, vol. 21, Sept.
|
|
The reverse relation occurs when the buoy moves upwards, then the line force becomes larger the bigger difference there is between the motion of the buoy and the generator translator. If the wave height (the difference between wave crest and wave trough) is larger than the stroke length, the translator will reach a standstill at the lower end stop. At the upper end stop the wave flushes over the buoy and at the lower the line slackens. In both of these cases no power is produced (voltage induced) until the translator starts to move again. This happens when the wave is lower than the buoy’s top position in the upper state, and in the lower state when the wave has risen so much that the buoy once again starts to pull the translator upwards.
|
|
Oceanic crust is formed at a mid-ocean ridge, while the lithosphere is subducted back into the asthenosphere at oceanic trenches Age of oceanic crust (red is youngest, and blue is oldest) Oceanic crust, which forms the bedrock of abyssal plains, is continuously being created at mid- ocean ridges (a type of divergent boundary) by a process known as decompression melting. Plume-related decompression melting of solid mantle is responsible for creating ocean islands like the Hawaiian islands, as well as the ocean crust at mid-ocean ridges. This phenomenon is also the most common explanation for flood basalts and oceanic plateaus (two types of large igneous provinces). Decompression melting occurs when the upper mantle is partially melted into magma as it moves upwards under mid-ocean ridges.
|
|
The DTB crystallizer (see images) has an internal circulator, typically an axial flow mixer – yellow – pushing upwards in a draft tube while outside the crystallizer there is a settling area in an annulus; in it the exhaust solution moves upwards at a very low velocity, so that large crystals settle – and return to the main circulation – while only the fines, below a given grain size are extracted and eventually destroyed by increasing or decreasing temperature, thus creating additional supersaturation. A quasi-perfect control of all parameters is achieved as DTF crystallizers offer superior control over crystal size and characteristics. This crystallizer, and the derivative models (Krystal, CSC, etc.) could be the ultimate solution if not for a major limitation in the evaporative capacity, due to the limited diameter of the vapour head and the relatively low external circulation not allowing large amounts of energy to be supplied to the system.
|
|
Vietnamese cash coins produced from the Đinh until the late Trần dynasty tend to be heavily based on the Chinese Kaiyuan Tongbao cash coins, an example would be the Lý dynasty era Thiên Tư Nguyên Bảo (天資元寶) cash coins cast under Emperor Lý Cao Tông which uses two distinct styles of Chinese calligraphy, one of them is a native Lý dynasty style and the other is based on the Kaiyuan Tongbao, often the Chinese character "Nguyên" (元) on older Vietnamese coins is copied directly from Chinese Kaiyuan Tongbao coins, particularly how the left hook of the character moves upwards, although variants of the characters in "pure Vietnamese styles" were cast simultaneously. Like many Kaiyuan Tongbao coins many of these early Vietnamese cash coins would add reverse crescents or mint marks which were often wholly borrowed from the calligraphic style of the Kaiyuan Tongbao. Every early Vietnamese cash coin that has a reverse inscription is based on the Kaiyuan Tongbao. The Asian Numismatic Museum (Sudokuone.
|
|
Top half of a failed connecting rod Connecting rod that initially failed through fatigue, then further damaged from impact with the crankshaft During each rotation of the crankshaft, a connecting rod is often subject to large and repetitive forces: shear forces due to the angle between the piston and the crankpin, compression forces as the piston moves downwards, and tensile forces as the piston moves upwards. These forces are proportional to the engine speed (RPM) squared. Failure of a connecting rod, often called "throwing a rod", is one of the most common causes of catastrophic engine failure in cars, frequently driving the broken rod through the side of the crankcase and thereby rendering the engine irreparable. Common causes of connecting rod failure are tensile failure from high engine speeds, the impact force when the piston hits a valve (due to a valvetrain problem), rod bearing failure (usually due to a lubrication problem, or incorrect installation of the connecting rod.
|
|
Instructions for building a jiggle syphon To begin with, gravity holds the sphere at the bottom, open, end of the chamber, although hydrostatic pressure will force the liquid up and around the sphere upon immersion. When the pipe is vigorously shaken up and down, the sphere moves upwards, lifting some liquid in the pipe; then when it falls down again, the increased hydrostatic pressure within the pipe (which now has a higher head of fluid in it than the surrounding container) pushes the sphere down and prevents the liquid flowing back. Repeated "jigglings" lift the fluid up the pipe until it reaches the highest point in the pipe, whereupon gravity causes it to start to flow down the other side, and the syphon action will "suck" the liquid through the system. This causes the pressure in the pipe to drop below the hydrostatic pressure in the container, so the sphere is lifted upwards, allowing the liquid to flow.
|
|