The agency pitched a robotic barista that used laser printing to sketch faces onto coffee foam.
|
|
Laserfood, a company based in Spain, is using laser printing to place a "natural brand" on produce.
|
|
Cubiio is a nifty little device that makes at-home laser printing quick, easy, and relatively painless.
|
|
Image: APWorksThe frame itself was made using a "selective 3D laser printing system" that melted minuscule aluminum alloy particles together.
|
|
A clutch of small businesses had been making signs using cheap laser printing and illegally flinging billboards up across the city.
|
|
Toward the back of the store, we found a customization studio where shoppers could personalize Puma products with paints, dyes, patchwork, embroidery, laser printing, and other mediums.
|
|
The organization says it can print out such a colossal amount of content thanks to a partnership with Stamper Technology, which has patented this specialized laser printing technology.
|
|
We found a customization studio near the back of the store, where shoppers had the chance to personalize Puma products with paints, dyes, patchwork, embroidery, laser printing, and other mediums.
|
|
Rather, it was started in 2002 by then 40-year-old physicist Michel Laberge, who quit a lucrative job at a laser printing company to follow an unconventional passion: nuclear fusion development.
|
|
"Steve connected those dots between calligraphy, laser printing and computers that could to be cheap enough and easy enough to use for non-technical people, and so that was the vision — that was the zooming out," says Sculley.
|
|
For her senior thesis, Ms. Meyer experimented with laser-printing news stories on upcycled denim, and immediately after school — she graduated with a B.F.A. in art and design — she founded her own line, Denimcratic, a jeans label with a political bent.
|
|
That same day, Bergdorf Goodman will have a shopping event at its new Atelier Notify denim customization lab where you can add, say, butterfly embroidery ($80) — or all manner of laser printing, patches, pins and studs — to a jean jacket ($345).
|
|
After finding his friends were interested in having a product like this too, he put down $27k of his personal funds into the venture and turned his wife's scrap-booking room into an HQ of sorts, copying the software he'd written to microSD cards and laser-printing labels.
|
|
Domino Printing Sciences PLC is a British-based developer of commercial inkjet printing, thermal transfer printing, print and apply machines, digital printing presses and laser printing products.
|
|
Then she went to work at her family's Japan Camera outlet for seven years. In 1988, along with a business partner, she opened her own company, Lasercolor Design & Printing, which specialized in laser printing. With a growing clientele in the film and television industry who needed props, the business was renamed Lasercolor Business Graphics and Props. As laser printing became more common, the company was renamed again to Tora Design, focusing more on the design aspect.
|
|
Teslin TS is a thermally stabilized grade which is more resistant to shrinkage when exposed to elevated temperatures. This is best used for applications where fixed graphics are printed before digital or laser printing of variable data.
|
|
Eiconjet was a laser printing solution using a design and hardware similar to Eiconscript. Rather than PostScript, it executed the Hewlett-Packard PCL5 (Printer Command Language). The Eiconjet software was also developed in-house as a Clean Room design.
|
|
Tracing paper may be uncoated or coated. Natural tracing paper for laser printing is usually uncoated. The HS code for tracing paper is 4806.30. Tracing paper can be recycled and also can be made from up to 30% recycled fibre.
|
|
The laser printing of single nanoparticles is a method of applying optical forces that direct single nanoparticles to targeted substrate regions. Van der Waals interactions cause attachment of the single nanoparticles to the substrate areas. This has been accomplished with gold and silicon nanoparticles.
|
|
The IBM 3800 Model 2 laser printing subsystem, developed by IBM Rochester, in the second batch announcement of IBM Kanji System in 1979, was the successor machine. Later, it would support not only Korean and Traditional Chinese, but also Simplified Chinese that is used in mainland China.
|
|
Technologies pioneered by its materials scientists such as liquid-crystal display (LCD), optical disc innovations, and laser printing were actively and successfully introduced by Xerox to the business and consumer markets. Work at PARC since the early 1980s includes advances in ubiquitous computing, aspect-oriented programming, and IPv6.
|
|
The Gander Public Library provides free wifi and public access computers with free internet. Books from other libraries can be transferred upon request and there is a selection of audiobooks and E-Books available. In addition the Library offers photocopying, scanning and colour and laser printing equipment.Gander Public Library Webpage.
|
|
Laser printing traces its history to efforts by Gary Starkweather at Xerox in 1969, which resulted in a commercial system called the Xerox 9700. IBM followed this with the IBM 3800 system in 1976. Both machines were large, room-filling devices handling the combined output of many users.Benji Edwards: Apple's Five Most Important Printers. macworld.
|
|
Whilst in Bundeena Bill was contracted by the University of Sydney to print testamurs for graduating students and acquired a hand-operated letterpress printing machine to print them. This printing method was preferred because the typed letters were embossed into the paper. Bill continued to print the testamurs until the technology was superseded by laser printing in the 1990s.
|
|
They have also been removed from most digital fonts, as these will normally be viewed on screen or printed through inkjet printing, laser printing, offset lithography, electrophotographic printing or other processes that do not show the ink spread of letterpress. Ink traps have remained common on designs intended to be printed on low-quality, absorbent paper, especially newsprint and telephone directories.
|
|
In 1986, Majoor joined the research department of Océ and investigated fonts for use on computer monitors. He also researched fonts for laser printing for Bitstream. In 1988, Majoor became a graphic designer for the Muziekcentrum Vredenburg, where he designed concert programmes. Frustration with limited availability of professional fonts on the institution's Macintosh computers led him to develop his own font, Scala.
|
|
Mauro Rovelli is an Italian entrepreneur, businessman, inventor and blogger. He was the chairman of Sacchettificio Monzese, an Italian company leader in the Italian paper envelope market. He also was the president of the national directive board of Assobuste and member of the national directive board of Assocarta. Mauro Rovelli, together with his nephews Milko Rovelli and Marco Rovelli, patented in 2010 a paper envelope with windows suitable for laser printing machines (called EnvEcoLaser).
|
|
Then in 1977, Xerox started a development project which worked to incorporate the Alto innovations into a commercial product; their concept was an integrated document preparation system, centered around the (then expensive) laser printing technology and oriented towards large corporations and their trading partners. When the resulting Xerox Star system was announced in 1981, the cost was about $75,000 ($ in today's dollars) for a basic system, and $16,000 ($ today) for each added workstation.
|
|
Also, when the Star disclosures were being prepared, the Xerox patent attorneys were busy with several other new technologies such as laser printing. Finally, patents on software, particularly those relating to user interfaces, were then an untested legal area. Xerox did go to trial to protect the Star user interface. In 1989, after Apple sued Microsoft for copyright infringement of its Macintosh user interface in Windows, Xerox filed a similar lawsuit against Apple.
|
|
Brian Kernighan later developed ditroff (typesetter independent troff) program which supported the C/A/T and other publishing systems. C/A/T was the workhorse of UNIX printing through the 1980s for shops that could not afford hot lead typography equipment or expensive and proprietary document typesetting systems. High resolution laser printing, now common in desktop publishing, was not yet available. Graphic Systems did not have the marketing capability to dominate the phototypesetting business.
|
|
9-pin and 24-pin are common; this specifies the number of pins in a specific vertically aligned space. With 24-pin printers, the horizontal movement can slightly overlap dots, producing visually superior output (near letter quality or NLQ), usually at the cost of speed. Dot matrix printing is typically distinguished from non-impact methods, such as inkjet, thermal, or laser printing, though they too may use a bitmap to represent the printed work.
|
|
The Xerox Alto workstation was developed at Xerox PARC. In 1970, under company president C. Peter McColough, Xerox opened the Xerox Palo Alto Research Center, known as Xerox PARC. The facility developed many modern computing technologies such as the graphical user interface (GUI), laser printing, WYSIWYG text editors and Ethernet. From these inventions, Xerox PARC created the Xerox Alto in 1973, a small minicomputer similar to a modern workstation or personal computer.
|
|
Gary Keith Starkweather (January 9, 1938 – December 26, 2019) was an American engineer and inventor most notable for the invention of the laser printer and color management. Starkweather received a B.S. in physics from Michigan State University in 1960 and an M.S. in optics from the University of Rochester in 1966. In 1969, Starkweather invented the laser printer at the Xerox Webster Research Center. He collaborated on the first fully functional laser printing system at Xerox PARC in 1971.
|
|
Some alternative procedures describe unspecific covalent binding and adhesive immobilization. However, lithographic methods can be used to overcome the problem of excessive number of coupling cycles. Combinatorial synthesis of peptide arrays onto a microchip by laser printing has been described, where a modified colour laser printer is used in combination with conventional solid- phase peptide synthesis chemistry. Amino acids are immobilized within toner particles, and the peptides are printed onto the chip surface in consecutive, combinatorial layers.
|
|
In the late 1980s and early 1990s, thermal transfer, laser printing, electrophotography, and, to a lesser extent, ink jet printing began to take away industrial and warehouse barcode applications due to better durability. Direct thermal made a strong comeback with point of sale receipts (gasoline pumps, cash registers, rental car receipts, etc.). During 1998, Nintendo used thermal paper technology for their Game Boy Printer. In 2006, NCR Corporation's Systemedia division introduced two-sided thermal printing technology, called "2ST".
|
|
He telephones Colonel Cedric Daniels, who is at a staging area set up in the gym of a disused school. Daniels answers the call leaving ASA Rhonda Pearlman alone to field questions from Deputy Commissioner William Rawls and Commissioner Ervin Burrell. She reports that forensics teams are attending each crime scene and they are recovering 9 mm bullet casings, vacuuming for hair and fiber and laser printing for footprints. Daniels returns and is asked to confirm that the bodies are linked to one organization.
|
|
With the arrival of WYSIWIG computers and software and laser printing, he co-founded the New York Macintosh User Group's DTP Special Interest Group. In 1984 he started Kramer Communications, one of New York City's first start-to-finish desktop publishing (DTP) companies; he sold the company in 1997. Kramer became involved in fax broadcasting and then with business development, usability and online marketing and promotion for a series of early online startups. In 1997, as he relocated to the San Francisco Bay Area, Kramer founded eConstructors.
|
|
Laser printing differs from traditional xerography as implemented in analog photocopiers in that in the latter, the image is formed by reflecting light off an existing document onto the exposed drum. Invented at Xerox PARC in the 1970s, laser printers were introduced for the office and then home markets in subsequent years by IBM, Canon, Xerox, Apple, Hewlett-Packard and many others. Over the decades, quality and speed have increased as the price has fallen, and the once cutting-edge printing devices are now ubiquitous.
|
|
This is spontaneous emission. Stimulated emission can be produced when the process is continued and further generate light with the same phase, coherence and wavelength. The choice of the semiconductor material determines the wavelength of the emitted beam, which in today's laser diodes range from infra-red to the UV spectrum. Laser diodes are the most common type of lasers produced, with a wide range of uses that include fiber optic communications, barcode readers, laser pointers, CD/DVD/Blu-ray disc reading/recording, laser printing, laser scanning and light beam illumination.
|
|
The tear perforations may be short slits, which leave noticeable serrations when torn apart, acceptable for many business documents such as invoices or basic data (such as computer code). Where better appearance is necessary the perforations can be much finer, leaving an almost perfectly smooth edge (microperforations, microperf for short). Continuous form paper of all types remains in production, although largely supplanted with the introduction of fast laser printers with single-sheet feed. Continuous stationery printed on a suitable printer is typically cheaper than laser printing although the output is of lower quality.
|
|
Mass replicating images, which attracted him to silk screening, was a precursor to laser printing. Warhol would first mark the surface according to where the colours are to be laid, as silk screening involves the layering of inks, one at a time, using a different frame. He would then place a silk mesh screen on the original and saturate the screen with coloured ink and emulsion using a squeegee. The saturated screen would then be placed on the surface of the print and this process would be repeated for each block of colour.
|
|
Before the invention of the printing press (1440), the Mesopotamians, Chinese and Egyptians used stamps and presses to emboss images into clay and print on cloth (BC). With the invention of paper in the second century AD, reproduction of literature became more efficient. The thirteenth century brought letterpress and relief printing to the scene, a method used to produce religious scripts. Since then, offset printing (1875), the mimeograph (1886), the duplicator/"ditto machine" (1920s), Xerography (1938), inkjet printing (1951), laser printing (1965), and digital printing (1991) have made the process increasingly more accessible to the general public.
|
|
HP LaserJet 4200 series printer, installed atop high-capacity paper feeder Laser printing is an electrostatic digital printing process. It produces high- quality text and graphics (and moderate-quality photographs) by repeatedly passing a laser beam back and forth over a negatively charged cylinder called a "drum" to define a differentially charged image. The drum then selectively collects electrically charged powdered ink (toner), and transfers the image to paper, which is then heated in order to permanently fuse the text, imagery, or both, to the paper. As with digital photocopiers, laser printers employ a xerographic printing process.
|
|
The document to be printed is encoded in a page description language such as PostScript, Printer Command Language (PCL), or Open XML Paper Specification (OpenXPS). The raster image processor (RIP) converts the page description into a bitmap which is stored in the printer's raster memory. Each horizontal strip of dots across the page is known as a raster line or scan line. Laser printing differs from other printing technologies in that each page is always rendered in a single continuous process without any pausing in the middle, while other technologies like inkjet can pause every few lines.
|
|
In comparison to technologies like thermal wax, dye sublimation, and laser printing, inkjets have the advantage of practically no warm up time, and often lower cost per page. However, low-cost laser printers can have lower per-page costs, at least for black-and-white printing, and possibly for color. For some inkjet printers, monochrome ink sets are available either from the printer manufacturer or from third-party suppliers. These allow the inkjet printer to compete with the silver-based photographic papers traditionally used in black- and-white photography, and provide the same range of tones: neutral, "warm" or "cold".
|
|
In 2007, he was inducted as a Fellow of the Computer History Museum for "leading development of the Xerox PARC Alto, and for innovations in networked personal computer systems and laser printing technologies." In 2010, he was named by the Association for Computing Machinery as the recipient of the 2009 Turing Award in recognition of his pioneering design and realization of the Alto, the first modern personal computer, and in addition for his contributions to the Ethernet and the tablet computer. Thacker held an honorary doctorate from the Swiss Federal Institute of Technology and was a Technical Fellow at Microsoft.
|
|
Supernotes are said to be made with the highest quality of ink printed on a cotton/linen blend, and are designed to recreate the various security features of United States currency, such as the red and blue security fibers, the security thread, and the watermark. Moreover, they are printed using an intaglio printing process or with engraved plates, the same process used by the U. S. Government for legitimate notes. In most counterfeiting, offset printing or color inkjet and laser printing are most common means of making counterfeit money. Experts who have studied supernotes extensively and examined them alongside genuine bills point out that there are many different varieties of supernotes.
|
|
He was also responsible for launching several new Canon products, notably the Canon AE-1 35mm SLR camera that allowed amateur photographers to take high quality photos. These cameras helped Canon get to the top of the camera market and helped the company build the reputation that it possesses today. In 1984 Mitarai struck a deal with Hewlett-Packard (HP) to produce photocopiers using HP software and Canon laser printing. In 1989 Mitarai returned to Japan and found that several of the company's divisions were in the red, however he was unable to do anything about it until 1995 when he was made CEO.
|
|
A Knight machine preserved in the MIT Museum Lisp machines are general-purpose computers designed to efficiently run Lisp as their main software and programming language, usually via hardware support. They are an example of a high-level language computer architecture, and in a sense, they were the first commercial single-user workstations. Despite being modest in number (perhaps 7,000 units total as of 1988Newquist, HP. The Brain Makers, Sams Publishing, 1994. .), Lisp machines commercially pioneered many now-commonplace technologies, including effective garbage collection, laser printing, windowing systems, computer mice, high-resolution bit-mapped raster graphics, computer graphic rendering, and networking innovations such as Chaosnet.
|
|
The LaserJet 4, especially the 4/4M/4+/4M+ models, have become known for their durability, mainly due to their reliable construction, as well as the printers built-in PCL (and optional PostScript) printer language support which is still used in computers to this day. Hewlett Packard dominated the laser printing sector during this time in part due to their reliability, relatively affordable pricing, and the spread of LaserJet 4 models from personal use up to heavy business use.Printer Works - BX Engine (Accessed June 14, 2006) The LaserJet 4 series was discontinued in the 1990s, and Hewlett Packard recommended the HP LaserJet 5 series as a replacement for the 4 series.
|
|
IEBIMAGE manipulates several types of definitions (AKA images) for the IBM 3800 laser printing subsystem and the IBM 4248 printer. Common uses are for forms control buffers (FCBs), character arrangement tables, character definitions and images of forms to be printed on the output along with the text, for company logos to be printed on the page, or just to print 'graybar' pages (alternating gray & white horizontal backgrounds, to match the previous greenbar paper). With this utility, many different forms or logos could be stored as images, and printed when needed, all using the same standard blank paper, thus eliminating the need to stock many preprinted forms, and the need for operators to stop the printer and change paper.
|
|
On May 2, 1968, McColough and his partner Joseph C. Wilson sent out a memo announcing the company intended to start an affirmative action program, making Xerox one of the first companies to do so. McColough and Xerox have been both praised and criticized for it. McColough started the PARC (Palo Alto Research Center), meant to operate something like AT&T;'s Bell Labs. PARC researchers developed pioneering commercial products in the field of personal computers—such as the Alto personal computer, GUI (graphical user interface), the WYSIWYG (What You See Is What You Get) editor, the first commercial mouse, Ethernet network architecture, OOP (object-oriented programming), PDL (Page Description Language), Internet protocols, and laser printing.
|
|
Daisy wheel printers from Diablo and Qume were the dominant high-end output technology for computer and office automation applications by 1980, though high speed non-impact techniques were already entering the market (e.g. IBM 6640 inkjet, Xerox 2700 and IBM 6670 laser). From 1981 onwards the IBM PC's introduction of "Code page 437" with 254 printable glyphs (including 40 shapes specifically for drawing forms), and development of Xerox Star-influenced environments such as the Macintosh, GEM and Windows made bit-mapped approaches more desirable, driving cost reductions for laser printing and higher resolution for impact dot matrix printing. Xerox later adapted Diablo's daisy wheel technology into a typewriter that sold for less than $50.
|
|
Cachet-making is considered an art form, and cachets may be produced by using any number of methods, including drawing or painting directly onto the envelope, serigraphy, block printing, lithography, engraving, laser printing, attachment of photographs or other paper memorabilia, etc. Frequently flight cachets (which have also been used in space and on the moon) are rubber- stamped. The largest and best-known cachet-making companies, which typically produce thousands or tens of thousands of printed cachets for U.S. stamp issues, are ArtCraft (1939-2015),"Demise of ArtCraft first-day covers reflected various market challenges". by Lloyd De Vries, Linns Stamp News (retrieved 30 January 2019) Artmaster, Fleetwood, House of Farnam, and Colorano.
|
|
At the time, many users had already invested considerable money in Adobe's still proprietary Type 1 fonts. As part of Apple's tactic of opening the font format versus Adobe's desire to keep it closed to all but Adobe licensees, Apple licensed TrueType to Microsoft. When TrueType and the license to Microsoft was announced, John Warnock of Adobe gave an impassioned speech in which he claimed Apple and Microsoft were selling snake oil, and then announced that the Type 1 format was open for anyone to use. Meanwhile, in exchange for TrueType, Apple got a license for TrueImage, a PostScript-compatible page-description language owned by Microsoft that Apple could use in laser printing.
|
|
In 1988 Jensen traveled to China with journalist Bonnie Churchill. The paintings that resulted from his visit were collected into an exhibition entitled "The Waking Dragon Beckons" which were displayed at the Walter Library at Alliant International University in San Diego, the University of Redlands Armacost Library, and the USC Pacific Asia Museum. Jensen was an early adopter of digital technology with his painting Man in Yellow Straw Hat, scanning a sketch into his computer then laser printing it with a device that converted black laser output to colors. In 1994 Jensen and Churchill produced a book entitled The Young Athlete that feature Jensen's illustrations of life lessons that celebrities such as Clint Eastwood, Elizabeth Taylor, and Bob Hope learned from playing sports as children.
|
|
CAD provides their virtual equivalents. Producing drawings usually involves creating an original that is then reproduced, generating multiple copies to be distributed to the shop floor, vendors, company archives, and so on. The classic reproduction methods involved blue and white appearances (whether white-on-blue or blue-on-white), which is why engineering drawings were long called, and even today are still often called, "blueprints" or "bluelines", even though those terms are anachronistic from a literal perspective, since most copies of engineering drawings today are made by more modern methods (often inkjet or laser printing) that yield black or multicolour lines on white paper. The more generic term "print" is now in common usage in the U.S. to mean any paper copy of an engineering drawing.
|
|
As the company expanded its product range it also entered into an increasing number of collaborations, including hats with Gabriella Ligenza, shoes with Emma Hope and rugs with Christopher Farr.The Times: It’s a rug revolution Although famed for its velvet scarves – which innovated the use of velvet as daywear – Georgina von Etzdorf was also widely admired for its skill in printing and experimenting with texture and technique on what are considered more difficult fabrics such as textured chiffon and organza, mohair, fine cashmeres, satin, rayon fur, chenille and wool boucle as well as using complex techniques such as devore, laser printing, and leather and plastic printing. Georgina von Etzdorf products have been worn and sought after by rock stars and royalty.
|
|
Files were originally printed as Adobe PostScript; however in modern workflows, PDF files have become the popular file type for submitting data to a RIP. The RIP generates the final raster image that will be printed directly (as in desktop inkjet or laser printing), set to photographic film or paper (using an imagesetter), or transferred direct-to-plate. Depending on the hardware and software components and configurations, RIPs can experience problems rasterizing the image data contained in PostScript or PDF files. If there is a failure in rasterizing the image, it can be costly, as output systems (printers, plate-setters, etc.) consume expensive supplies, can require extensive amounts of time to process complex image data, and require skilled labor to operate.
|
|
Coincident with sublimation printing, which was first used in high volume by IBM on their keyboards, was the introduction by IBM of single-curved-dish keycaps to facilitate quality printing of key legends by having a consistently curved surface instead of a dish. But one problem with sublimation or laser printing was that the processes took too long and only dark legends could be printed on light-colored keys. On another note, IBM was unique in using separate shells, or "keycaps", on keytop bases. This might have made their manufacturing of different keyboard layouts more flexible, but the reason for doing this was that the plastic material that needed to be used for sublimation printing was different from standard ABS keytop plastic material.
|
|
Inkjet printing and laser printing did produce sufficient quality type, and so computers with these types of printers quickly replaced phototypesetting machines. With modern desktop publishing software such as flagship software Adobe InDesign and cloud-based Lucidpress, the layout process can occur entirely on-screen. (Similar layout options that would be available to a professional print shop making a paste-up are supported by desktop publishing software; in contrast, "word processing" software usually has a much more limited set of layout and typography choices available, trading off flexibility for ease of use for more common applications.) A finished document can be directly printed as the camera-ready version, with no physical assembly required (given a big enough printer). Greyscale images must be either half toned digitally if being sent to an offset press, or sent separately for the print shop to insert into marked areas.
|
|
The IYL 2015 was also celebrated in many other ways combining art, science, and innovative approaches to raising awareness with the general public. The IYL 2015 logo was projected widely, including on The Globe of Science and Innovation at CERN, and was also the subject of large-scale light painting by the Light Painting World Alliance in Oviedo, Spain and on the North Sea in Germany. On a different scale altogether, a micron-scale logo was fabricated using advanced plasmonic colour laser printing technology at the Technical University of Denmark. Other innovative ways in which the IYL 2015 logo appeared was as a hologram prepared for laser pointers, inside cakes, drawn with machine vision-robotic control, and included in a special design for a reindeer- themed Christmas decoration that was placed on the Christmas Tree outside the UK Prime Minister's residence at 10 Downing Street.
|
|
Yamamoto has introduced one piece of legislation, the Advanced Education Statutes Amendment Act, 2011,Bill 18 which sought to implement several measures, including expanding the Personal Education Number system which tracks students in the BC educational system to also include private educational institutions, specifying that board members of colleges and universities are to act in the best interests of the institution, and updating the Architectural Institute of BC's dispute resolution process. The bill was introduced on November 3, 2011, but was not adopted before the winter break. Prior to her election to the legislature, Yamamoto owned and operated a business that started as a specialty shop for laser printing but evolved to focus on design and had created props for the television and film industry. She spent time on the governing boards of Capilano College, the North Shore Credit Union, the Vancouver Coastal Health Authority, and the Gordon and Marion Smith Foundation.
|
|