I turn my own grips from high grade Portuguese cork, and use the best nickel silver ferrules and reel seat hardware available from the USA.
|
|
Defeated, rejected, upended, forlorn, left for deadwith mangled rosettes, runners, ferrules, ribs obscenely spread,the classic, the pocket, the bubble, golf, and automaticall died in the usual fray, both bathetic and tragic.
|
|
Brush handles may be made of wood or plastic while ferrules are metal (usually nickel-plated steel).
|
|
Quill ferrules are also found: these give a different "feel" to the brush, and are staple of French-style aquarel wash brushes.
|
|
Top: wire terminating in an insulated ferrule Center: Several ferrules with colored insulation, and two uninsulated ferrules Insulated, and uninsulated ferrules An electric wire ferrule (sometimes electric end terminal) is a metal tube crimped over stranded wire to secure the strands within a screw terminal. Electrical insulation may be included to protect any exposed portion of the wire not completely inside the screw terminal post. Stranded wire is preferred for most electrical applications because it is more reliable than solid wire. It is more flexible and durable because repeated bending will not cause it to break.
|
|
Threaded Studs, Ferrules, Sockets, and Sleeves are a few examples. US Military Standard MS51844 Wire Rope Swaging Sleeve Standard Swaging ropes with fibre cores is not recommended.
|
|
A wire rope terminated with a thimble and a ferrule Picco pipe with nickel silver ferrule Non-circular ferrules holding bristles of a brush to its handle A ferrule (a corruption of Latin ' "small bracelet", under the influence of ' "iron") is any of a number of types of objects, generally used for fastening, joining, sealing, or reinforcement. They are often narrow circular rings made from metal, or less commonly, plastic. Ferrules are also often referred to as eyelets or grommets within the manufacturing industry. Most ferrules consist of a circular clamp used to hold together and attach fibers, wires, or posts, generally by crimping, swaging, or otherwise deforming the ferrule to permanently tighten it onto the parts that it holds.
|
|
Shillelaghs may be hollowed at the heavy "hitting" end and filled with molten lead to increase the weight beyond the typical two pounds; this sort of shillelagh is known as a 'loaded stick'. The loaded types needed to have its knob fitted with iron ferrules to maintain structural integrity. But the sticks also have iron ferrules fitted onto their narrow end as well. Shillelagh may also have a heavy knob for a handle which can be used for striking.
|
|
The end of the shaft has a cuff known as the ferrule, which is used to hold the cue tip in place and to bear the brunt of impact with the cue ball so that the less resilient shaft wood does not split. Ferrules are no longer made of ivory, but, rather, are now made of carbon fiber, or a plastic such as melamine resin, or phenolic resin, which are extremely durable, high- impact materials that are resistant to cracking, chipping, and breaking. Brass ferrules are sometimes used, especially for snooker cues.
|
|
These include ferrules and ferrule machines, wiring systems and laser scanning. The company has specialised in supplying high speed laser scanning systems to customers since the early 1990s following the completion of a doctorate in this subject by Christoph Fröhlich.
|
|
These were used to fix the flag to a four-section staff, each section four feet long and fitted with ferrules for joining.Myer (1866), pp. 175–176 The disks were 12 to 18 inches (30 to 46 cm) in diameter and were made of metal or wood frames with canvas surfaces.
|
|
The Talurit company was established in 1948, a trade mark in many countries is TALURIT and ULTRAGRIP. The parent company is based in Gothenburg, Sweden with subsidiaries near Singen in Germany and in Barnsley, United Kingdom. The ferrules are sold throughout the world and the company has representations in most industrialized countries.
|
|
Some of them were made to be used as a walking cane until needed for sport. Since the 1980s, with the advent of flexible, yet stiff graphite ferrules, travel rod technology has greatly advanced, and multi-piece travel rods that can be transported in a suitcase or backpack constitute a large share of the market.
|
|
The long metal ferrule is most often made of silver, though copper, brass and swaasa is also used. Barongs used in World War II may also have aluminium ferrules. The ferrule tends to be around 8 cm (3 inches) in length. Often the ferrule will have lacquered braided natural fiber rings to aid in grip.
|
|
The metal ball-bearing mechanism was patented by him. It consisted of brass ferrules and balls. It was a practical strong metal attachment to the back two legs of wooden chairs to allow the sitter to tilt back without gouging the floor. A version of O'Donnell's tilt device is still being used on chairs in the twenty-first century.
|
|
It started sales of jewel bearings for watches and clocks and began to manufacture cap jewel, hole jewel, impulse jewel and pallet stone. In 1980, it started manufacturing ferrules for the optical communication industry utilizing injection molding engineering and polishing techniques. Adamant merged with its parent company, Namiki Precision Jewel Co., Ltd., to establish Adamant Namiki Precision Jewel Co., Ltd.
|
|
Artists' brush handles are commonly wooden but can also be made of molded plastic. Many mass-produced handles are made of unfinished raw wood; better quality handles are of seasoned hardwood. The wood is sealed and lacquered to give the handle a high-gloss, waterproof finish that reduces soiling and swelling. Metal ferrules may be of aluminum, nickel, copper, or nickel-plated steel.
|
|
Crimping is joining two or more pieces of metal or other ductile material by deforming one or both of them to hold the other. The bend or deformity is called the crimp.Crimp tool for 0.14 mm to 10.00 mm insulated and non- insulated ferrules F connectors crimped on to coaxial cable. The bottom middle cable is missing its crimping collar.
|
|
Fifes are made primarily of wood, such as blackwood, grenadilla, rosewood, mopane, pink ivory, cocobolo, boxwood, maple and persimmon. Some fifes are entirely made of metal or plastic. Military and marching fifes have metal reinforcing bands, called ferrules, around the ends to protect them from damage. A fife used in less strenuous conditions may have a lathe-turned, knob-like decoration at the ends for protection.
|
|
Officers wore silver epaulettes, braiding and ferrules, the latter in their czerkeskas.Preben Kannik, page 236, "Military Uniforms of the World in Colour", SBN=71370482 9 This Caucasian national dress was also worn by the Kuban Cossack Host but in different facing colors. Tall black fur hats were worn on all occasions with light blue cloth tops and (for officers) silver lace. A whip was used instead of spurs.
|
|
Animal remains of cattle, buffalo, sheep and goat are also found. Period II saw the introduction of iron and five different forms of burials were discovered. Lances, ferrules, daggers and arrowheads were found, apart from beads of gold and terracotta objects. The pottery of Period II consisted of the megalithic red-and-black ware, all-black ware and red-slipped ware, some of which had graffiti on them.
|
|
In the Bronze Age, there are ferrules made of soil or stone, large and small crocodiles, stone needles, and needle houses. It can be inferred that weaving and sewing were already done at the time when such spinning tools and sewing tools were unearthed. Following the Bronze Age, iron farming came into being in the Iron Age, and agriculture was remarkably developed. Textile cultivation technology developed and textile production increased.
|
|
Approximate manufacturing span 1958-1960 The Cembalet has a rectangular case side-profile with no taper towards the front. It has a gold lid lift bar fitted to the front of the lid. It has tapered cylindrical wooden legs with gold ferrules at the foot that mount to angled blocks on the underside of the case. It has a wooden fascia panel below the keys with a central lid lock.
|
|
Approximate manufacturing span 1960-1963 The Cembalet I has a rectangular case side- profile with no taper towards the front. It has a gold lid lift bar fitted to the front of the lid. It has tapered cylindrical wooden legs with gold ferrules at the foot that mount to angled blocks on the underside of the case. It has a wooden fascia panel below the keys with a central lid lock.
|
|
In smaller units some manufacturers use ferrules to seal the tube ends instead of rolling. To take care of length wise expansion of tubes some designs have expansion joint between the shell and the tube sheet allowing the latter to move longitudinally. In smaller units some sag is given to the tubes to take care of tube expansion with both end water boxes fixed rigidly to the shell.
|
|
Short cycle stud welding is a faster form of drawn arc stud welding which can use capacitor discharge weld studs instead of drawn arc studs. This method can tolerate welding studs to thinner sheet metals than the drawn arc process, though it does not achieve welds that are as strong or penetrative. It also does not require the use of ceramic ferrules. Sometimes operators using this process use shrouding gas to reduce spatter.
|
|
IBM 402 Accounting Machine control panel The operation of Hollerith/BTM/IBM/Bull tabulators and many other types of unit record equipment was directed by a control panel. Operation of Powers-Samas/Remington Rand unit record equipment was directed by a connection box. Control panels had a rectangular array of holes called hubs which were organized into groups. Wires with metal ferrules at each end were placed in the hubs to make connections.
|
|
These premium rods offer a stiffness, sensitivity, and feel unmatched by any other synthetic material. Graphite composites are especially well-suited to the construction of multi-piece rods since the joints, known as ferrules, in better-quality graphite rods do not significantly affect overall flex or rod action. Today's modern carbon graphite composite fly rods are available in a wide range of sizes and types, from ultralight trout rods to bass fishing rods and two-handed "spey" rods.
|
|
A 1919 Kaval. Bone ferrules decorated on the lathe with turned grooves and bird's eye decorations are applied with a preshaped cutting tool. While typically made of wood (cornel cherry, apricot, plum, boxwood, mountain ash, etc.), kavals are also made from water buffalo horn, Arundo donax Linnaeus 1753 (Persian reed), metal and plastic. A kaval made without joints is usually mounted on a wooden holder, which protects it from warping and helps keep the interior walls oiled.
|
|
The smelter includes an induction furnace for the manufacture of ingots and metal ferrules. The metals are melted in the furnace at 1600 °C. Impurities are removed manually, then the molten metal is poured into a ladle and is then cast into ingots or centrifuged in a tube. The ingots, conical cylinders of about 1.5 t are considered as final waste and are sent to the Center of storage l'Aube in Soulaines-Dhuys for a long-term storage.
|
|
Now unable to carry traditional machetes or broadswords, people turned to the gunong to fill the gap without arousing the fears of the American colonial authorities. Around this time, the gunong became larger and was crafted with a pistol-grip handle rather than the old straight hilts. More extravagant fittings with chased bands on scabbards, belt clips, guards, and bulbous ferrules also became common. After World War II, thinner-bladed gunong were made from newer materials like nickel and aluminium.
|
|
Adamant Namiki offers optical components with a focus on ferrules, sleeves, and connectors. A ferrule is a component to link optical fibers together and high-precision (less than 1 micrometer) processing technology is required to ensure the secure connection of several micrometer optical fiber cores. Adamant Namiki also combines its high-precision processing and assembly technologies to provide optical device components such as receptacles and pigtails, optical switches using MEMS(Microelectromechanical systems) technology, and optical devices such as variable attenuators.
|
|
LPG will damage an incompatible hose, including most acetylene hoses. The threaded connectors on the hoses are handed to avoid accidental mis-connection: the thread on the oxygen hose is right-handed (as normal), while the fuel gas hose has a left- handed thread. The left-handed threads also have an identifying groove cut into their nuts. Gas-tight connections between the flexible hoses and rigid fittings are made by using crimped hose clips or ferrules, often referred to as 'O' clips, over barbed spigots.
|
|
The trim ring, usually black (It may have additional trim colors), that is found directly on top of the hosel on many woods and irons. The ferrule is mostly decorative, creating a continuous line between the shaft and the wider hosel, but in some cases it can form part of the securing mechanism between hosel and shaft. Ferrules of differing weights can fine-tune the center of mass of the overall club head, but for these minute adjustments, screw-in weighted inserts at specific points on the club head are usually used instead.
|
|
In the temple area there were mainly coins, fibulae, militaria such as lance ferrules, shield bosses, some cheek flaps from a Weisenau-type helmet. and objects made of lead, which were probably brought here as offerings. Fragments of partly gilded objects, furniture and door fittings, large bronzes, a bronze lamp, fragments of a limestone statue and an inscription by Titus Silius Lucusta, dedicated to Apollo, showed that the temple inventory must have been very elaborately furnished. There were also isolated pits around the temples that still contained fragments of amphorae.
|
|
Boron and Graphite rods came around in the 1960s and 1970s when the United States and United Kingdom invested considerable research into developing the new technologies. Hewitt and Howald were the first to come up with a way to lay the fibers into the shape of a fishing rod by wrapping them around a piece of balsa wood. However, by 1977, boron fibre technology had been muscled out by the cheaper material graphite and was no longer competitive in the market. Rods for travelers were made with nickel-silver metal joints, or ferrules, that could be inserted into one another forming the rod.
|
|
A walker (also known as a Zimmer frame) is the most stable walking aid and consists of a freestanding metal framework with three or more points of contact which the user places in front of them and then grips during movement. The points of contact may be either fixed rubber ferrules as with crutches and canes, or wheels, or a combination of both. Wheeled walkers are also known as rollators. Many of these walkers also come with an inbuilt seat so that the user may rest during use and with metal pouches to carry personal belongings.
|
|
Floyd Rose introduced one of the first improvements on the vibrato system in many years when, in the late 1970s, he experimented with "locking" nuts and bridges that prevent the guitar from losing tuning, even under heavy vibrato bar use. Tune-o-matic with "strings through the body" construction (without stopbar) The fourth type of system employs string-through body anchoring. The strings pass over the bridge saddles, then through holes through the top of the guitar body to the back. The strings are typically anchored in place at the back of the guitar by metal ferrules.
|
|
Manufacturers also provide a variety of specialty cues tailored to specific shots. Pool break cues have tips made from very hard leather (sometimes layered) or phenolic resin to ensure that the full force of the stroke is transferred to the cue ball during the , and to avoid excessive wear-and-tear on the tips and ferrules of players' main shooting cues. Phenolic-tipped break cues often have a merged phenolic ferrule-tip, instead of two separate pieces. Jump cues are shorter, lighter (12 ounces and less) cues that make performing a legal easier, and also often have a very hard tip.
|
|
The Lead Guitars were manufactured between 1979 and 1982 by the Fender Musical Equipment Co. under the direction of Gregg Wilson and Freddie Tavares. Gregg Wilson was succeeded by John Page, who eventually headed the Fender Custom Shop. The Lead Series have elements of the Stratocaster and Telecaster in their design with a body that is slightly smaller and with a slightly different shape than the Stratocaster, a Stratocaster-like neck (and headstock), and hardtail bridge with Telecaster- like string ferrules on the back of the body.The Fender Lead Series The Unique Guitar Blog - May 27th, 2018.
|
|
From relatively early on, Brigg chose to go down the route of individualized umbrella production, buying in the frame components from Fox Umbrella Frames Ltd, but using its own shafts, handles, ferrules, sliders and rib tips, not to mention covers. The firm was quick to complement its umbrella range with high- quality walking sticks. For day wear walking sticks were lightweight and in wood, bamboo or cane with handles ranging from the discreet to the frivolous, with animal heads being popular. The style and workmanship of some handles suggest that the Czilinsky family of ivory and wood carvers may well have taken commissions from Brigg as it did from Swaine & Adeney.
|
|
34 The antireflective properties are due in part to the fact that the nose oil fills small cracks and scratches and forms a smooth, polished surface, and in part to the low index of refraction of the oil, which can reduce surface reflection from transmissive optics that have a high index of refraction. The same effect is sometimes used by numismatic hobbyists to alter the apparent grade of slightly worn coins.pcgs.com Nose grease is often recommended as a lubricant for fly fishing rod ferrules. Nose grease has mild antifoaming properties and can be used to break down a high head on freshly poured beer or soft drinks.
|
|
The of the cue is of smaller circumference, usually tapering to an terminus called a (usually made of fiberglass or brass in better cues), where a rounded leather is affixed, flush with the ferrule, to make final contact with balls. The tip, in conjunction with chalk, can be used to impart spin to the cue ball when it is not hit in its center. Cheap cues are generally made of pine, low-grade maple (and formerly often of ramin, which is now endangered), or other low-quality wood, with inferior plastic ferrules. A quality cue can be expensive and may be made of exotic woods and other expensive materials which are artfully inlaid in decorative patterns.
|
|
In small sizes, the compression fitting is composed of an outer compression nut and an inner compression ring or ferrule (sometimes referred to as an "olive") that is typically made of brass or copper. Ferrules vary in shape and material but are most commonly in the shape of a ring with beveled edges. To work properly, the ferrule must be oriented correctly—usually the ferrule is fitted such that the longest sloping face of the ferrule faces away from the nut. When the nut is tightened, the ferrule is compressed between the nut and the receiving fitting; the ends of the ferrule are clamped around the pipe, and the middle of the ferrule bows away from the pipe, making the ferrule effectively thicker.
|
|
Bases may be bayonet-type with one or two contacts, plastic or glass wedge, or dual wire loops or ferrules used on tubular "festoon" lamps. Screw-base lamps are never used in automobile applications due to their loosening under vibration. Signal lamps with internal or external coloured lenses use colourless bulbs; conversely, lamps with colourless lenses may use red or amber bulbs to provide light of the required colours for the various functions. Typically, bulbs of 21 to 27 watts producing 280 to 570 lumens (22 to 45 mean spherical candlepower) are used for stop, turn, reversing and rear fog lamps, while bulbs of 4 to 10 W, producing 40 to 130 lm (3 to 10 mscp) are used for tail lamps, parking lamps, side marker lamps and side turn signal repeaters.
|
|
The receiver of the M70 is 1.5 mm thick, compared to the 1 mm thick receiver of the AKM, making it more rigid. The receiver has a bulge at the front to accommodate an enlarged trunnion similar to a RPK receiver, with the front trunnion rivet configuration likewise resembling a RPK and not an AKM. Much like the other AKs, the M70 experienced changes to other parts between the milled and stamped variants, such as moving the gas relief ports from the tube to the gas block, adding lightening cuts on the bolt and bolt carrier, moving the rear sling swivel from the back of the receiver to the buttstock and omission of the metal ferrules from the lower handguards and pistol grips. It however, like the Type 56, retained many milled features, such as the thicker barrel, front sight shape, bolt and bolt carrier "in the white", smooth dust cover, lack of a pistol grip reinforcement plate on underfolders, forward sling loop on the gas block and blued finish.
|
|
However, some incidental loss of water from the system was unavoidable, and the French naval engineer Louis-Émile Bertin regarded a 5% loss of water per cycle as the maximum that could be sustained in a water tube boiler installation. Therefore, additional feedwater was required, and it was supplied by apparatus such as an evaporator, as was fitted in , built by Palmers and launched in 1899. Each boiler had its own feedwater pump, and a feedwater regulator also of Reed's design. A cross section and plan of the connection between water tubes and a water chamber in a Reed boiler. The spheroidal ferrules "3" are screwed onto the tubes, which are then inserted into holes in the water chamber wall that are of slightly larger diameter than the tubes; the tubes are then secured by nuts "N" on the inside of the chamber. Another type of boiler similar to and later than the du Temple boiler was the Yarrow boiler, which usually dispensed with external down-comer tubes after its designer, Alfred Yarrow, demonstrated in 1896 that they were not essential to the circulation of water inside a boiler of this type.
|
|