How to use desoldered in a sentence? Find typical usage patterns (collocations)/phrases/context for "desoldered" and check conjugation/comparative form for "desoldered". Mastering all the usages of "desoldered" from sentence examples published by news publications.
Hooker finds the proper switch which has indeed become desoldered.
|
|
Then, he desoldered the wires from the original speaker in the headset, and connected his old Apple earbud speaker to the headset's printed circuit board.
|
|
All five of the lower PCBs were rebuilt with modern components; hundreds of chips and capacitors were desoldered, and newly manufactured ones were put in place.
|
|
After writing his code to that chip, Elkins desoldered it from the Digispark board and soldered it to the motherboard of a Cisco ASA 5505 firewall.
|
|
This is where the NAND chip is typically desoldered, dumped into a file (likely by a chip reader/programmer, which is like a cd burner for chips), and then copied so that if the device begins to wipe or delay after five or ten tries, they can just re-write the original image back to the chip.
|
|
Here you can see that moisture in the circuit board turned to steam when it was subjected to intense heat. This produces the so-called "popcorn effect." Desoldering the chips is done carefully and slowly, so that the heat does not destroy the chip or data. Before the chip is desoldered the PCB is baked in an oven to eliminate remaining water.
|
|
If the USB drive has no protection switch, a blocker can be used to mount the drive in a read-only mode or, in an exceptional case, the memory chip can be desoldered. The SIM and memory cards need a card reader to make the copy. The SIM card is soundly analyzed, such that it is possible to recover (deleted) data like contacts or text messages. The Android operating system includes the dd command.
|
|
The JTAG port is not always soldered with connectors, such that it is sometimes necessary to open the device and re-solder the access port. The protocol for reading the memory must be known and finally the correct voltage must be determined to prevent damage to the circuit. The boundary scan produces a complete forensic image of the volatile and non-volatile memory. The risk of data change is minimized and the memory chip doesn't have to be desoldered.
|
|
Generally the emulation only includes raw hardware logic, such as for the CPU and RAM, and specialized DSPs such as tone generators or video sprites. The MESS emulator does not include any programming code stored in ROM chips from the emulated computer, since this may be copyrighted software. Obtaining the ROM data by oneself directly from the hardware being emulated can be extremely difficult, technical, and expensive, since it may require desoldering of integrated circuit chips from the circuit board of the device they own. The desoldered IC is placed into a chip reader device connected to a USB or serial port of another computer, with pin sockets on the reader specifically designed to match the chip package shape in question, to perform a memory dump of the ROM to a data file.
|
|
No results under this filter, show 9 sentences.