Open the Control Center and do a long hold on the connection box displaying the icons for Bluetooth, Wi-Fi, Cellular and Airplane Mode.
|
|
Cemach, Harry P., 1951, The Elements of Punched Card Accounting, Pitman, p.27. Within certain limits the information punched in any column of a card can be reproduced in any desired position by the tabulator. This is achieved by means of a Connection Box. ... The connection box can be easily removed from the tabulator and replaced by another.
|
|
The smaller buildings and structures were first to be demolished. One worker was killed during the demolition work, in May 2001, crushed underneath an electrical connection box which fell from a wall. On 31 October 2001, the ash silo which stood at the ash dock was toppled using explosives to demolish the stilts the structure stood on.
|
|
Two weeks prior to the engine room fire, Carnival Triumph experienced propulsion issues that caused it to be five hours late returning to its Galveston home port on January 28, 2013, delayed the ship's departure for its next cruise from 2:30 p.m. until 8 p.m. that night, and resulted in the elimination of a scheduled stop in Cozumel because of the ship's diminished cruising speed. While in port, a Port State Control (PSC) vessel inspection by the Texas City, Texas, U.S. Coast Guard Marine Safety Unit was conducted, resulting in a finding that there was "a short in the high voltage connection box of one of the ships [sic] generators causing damage to cables within the connection box", a deficiency under 50AC SOLAS 2009 Ch 1 Reg 11.
|
|
IBM 402 Accounting Machine control panel The operation of Hollerith/BTM/IBM/Bull tabulators and many other types of unit record equipment was directed by a control panel. Operation of Powers-Samas/Remington Rand unit record equipment was directed by a connection box. Control panels had a rectangular array of holes called hubs which were organized into groups. Wires with metal ferrules at each end were placed in the hubs to make connections.
|
|
Three-phase totally-enclosed fan-cooled (TEFC) induction motor with end cover on the left, and without end cover to show cooling fan on the right. In TEFC motors, interior heat losses are dissipated indirectly through enclosure fins, mostly by forced air convection. Cutaway view through stator of TEFC induction motor, showing rotor with internal air circulation vanes. Many such motors have a symmetric armature, and the frame may be reversed to place the electrical connection box (not shown) on the opposite side.
|
|
This data processing was accomplished by processing punched cards through various unit record machines in a carefully choreographed progression. This progression, or flow, from machine to machine was often planned and documented with detailed flowcharts that used standardized symbols for documents and the various machine functions. All but the earliest machines had high-speed mechanical feeders to process cards at rates from around 100 to 2,000 per minute, sensing punched holes with mechanical, electrical, or, later, optical sensors. The operation of many machines was directed by the use of a removable plugboard, control panel, or connection box.
|
|