Sentences Generator
And
Your saved sentences

No sentences have been saved yet

78 Sentences With "conically"

How to use conically in a sentence? Find typical usage patterns (collocations)/phrases/context for "conically" and check conjugation/comparative form for "conically". Mastering all the usages of "conically" from sentence examples published by news publications.

Bjergsø stopped by a large conically shaped stainless steel tank where he peered through the porthole.
Later, I consider the European hornbeam tree before me, whose bare branches jut out conically, and an Asian dogwood tree, whose bark reddens in the winter.
Two general types of ground glass joints are fairly commonly used: joints which are slightly conically tapered and ball and socket joints (sometimes called spherical joints).
Lightning F.3 in flight, 1983 The F.3A introduced two improvements: a new, non-jettisonable, ventral fuel tank,Pilot's Notes, Lightning F.Mk.6. Warton Aerodrome, UK: English Electric Technical Services, September 1966. and a new, kinked, conically cambered wing leading edge, incorporating a slightly larger leading edge fuel tank, raising the total usable internal fuel by . The conically cambered wing improved manoeuvrability, especially at higher altitudes, and the ventral tank nearly doubled available fuel.
It is similar to Protea effusa, primarily differing in having conically-shaped receptacles within the inflorescence, and also to P. pendula, from which it differs by having wider leaves with indistinct venation.
The spire is conically rounded. The aperture is nearly circular. A ledge runs along the inner side of the lip, not far from the opening. There is no real umbilicus, but an umbilical split.
Generic characters of the genus Pyrgulopsis are: the shell is minute, conically turreted, somewhat elongated, imperforate and unicarinate. The apex is acute. The aperture is ovate. The edge of the aperture, called the peritreme, is continuous.
At the third to the fifth floor levels (i.e. the restaurant and hotel floors) the outer shell takes on the shape of a conical rotating surface. It consists of 64 conically placed panels. The panel surface is made of anodized aluminium sheets.
Fruit is medium-sized elongated conically shaped with very smooth skin and a high sugar content. ;Piña: Fruit of conical shape with very marked protuberances, medium size, with thin skin, dark green-opaque. White and juicy pulp, excellent aroma reminiscent of a pineapple. Late maturity.
The size of the shell varies between 33 mm and 55 mm. The imperforate, orange-rose shell is conically turbinated. The whorls are convexly sloping, then encircled with two rows of scales, papillary grained throughout. The base of the shell is rather flat, tinged with chrome orange.
The rough sinistral (eastern range) or smooth dextral (western range) shell is conically-elongate, solid, slightly rounded, and margined above. The shell has six whorls. The aperture is elongately-ovate and the lip is subreflected. The columella is short, obliquely twisted and has an expanded callus.
These are all exquisitely fretted by the longitudinal scratches. The colour of the shell is greyish, polished, with a very beautiful silvery sheen on the whole surface. The spire is conically cylindrical. The body whorl is small and the apex broad in proportion to the size of the shell.
Les Eclaireurs Lighthouse (the French name "Les Éclaireurs" means "the Scouts") is a slightly conically shaped lighthouse standing on the northeasternmost island of the five or more Les Eclaireurs islands, which it takes its name from, east of Ushuaia in the Beagle Channel, Tierra del Fuego, southern Argentina.
The dextral or sinistral shell is conically-elongate, solid, plano-convex and margined above with the suture well impressed. The shell has six whorls. The aperture is subovate and the white lip is expanded, unreflected, somewhat contracted in its center and thickened within. The short columella is flat and lightly toothed.
Portholes on submarines are generally made of acrylic plastic. In the case of deep diving submarines, the portholes can be several inches thick. The edge of the acrylic is usually conically tapered such that the external pressure forces the acrylic window against the seat. Usually such windows are flat rather than spherically dished.
A bend stiffener is a type of cable protection system. They are conically shaped polyurethane mouldings designed to add local stiffness to a riser, flowline, cable or umbilical. They limit the bending stresses and curvature to acceptable levels. They are used in the oil and gas industry as part of offshore deep sea drilling operations.
The castle, which has been modernised within, has a crenellated parapet, which may be a later addition. It has one open round turret at one corner and two conically capped turrets at two others. The castle, which has four storeys and an attic, is built of red rubble. It is a category B listed building.
Hindwing: rich chrome yellow; costa and termen broadly black; interspaces 1 to 7 with outwardly pointed, broadly triangular, yellowish-white diffuse spots on the black terminal margin, the black on the inner side of these spots produced conically inwards; the black in interspace 7 centred with an elongate, outwardly somewhat diffuse, oval vermilion streak.
Underground tours were conducted until the nearby pit at Wolstanton closed. Incidentally during this period and following the findings of the official inquiry into the Aberfan disaster, the conically shaped spoil heap at Chatterley Whitfield was reduced in height by almost a half and took from 1976 until 1982 for the landscaping to be completed.
The spire is high, conical, subscalar. The apex is conically turbinate and consists of 4¼ small, convex, chestnut-coloured whorls, of which the last has a deeply sinuated lip-edge. They are scored with fine raised threads, which on the upper part of the whorls are curved and below are reticulated. There are 5½ whorls besides the embryonic apex.
The shell grows to a length of 7.6 mm. (Original description) The shell is high, narrow, conically cylindrical, with a blunt, flatly rounded apex, a short conical base, and scarcely any snout. It is hardly angulated, ribbed, contracted in the sinus area, but barely so at the suture. Its colour is grey, with a silvery sheen.
The bridge was built in curved shape in the middle to resist the assault of wind and water. The main teak posts were hammered into the lake bed seven feet deep. The other ends of the posts were shaped conically to make sure that rain water would fall down easily. The joints of the bridge are intertwined.
A notable dwelling is the 1919 Rice House, known as "The Huts." It consists of one large (20 feet in diameter) circular conically-roofed section and three smaller (15 feet in diameter) circular units clustered to the north, east, and southeast. and Accompanying photo and Accompanying map It was listed on the National Register of Historic Places in 1991.
Sputnik 3 was an automatic scientific laboratory spacecraft. It was conically shaped and was 3.57 m (11.7 ft) long and 1.73 m (5.68 ft) wide at its base. It weighed 1,327 kg (1.46 tons) and carried twelve scientific instrumentation. After 692 days in orbit, Sputnik 3 reentered the atmosphere and burned up on 6 April 1960.
79 The mounds were described in the nineteenth century as being conically shaped and approximately 10 feet tall.Wetmore, p. 352 By 1888, the site had been cultivated and the mounds were steadily reduced by plowing. The first mound, located on the south wall of the embankment, had been partially damaged by construction company bulldozers shortly before the excavation began.
By rotating the ball, flow can be directed between different ports. Ball valves use spherical rotors with a cylindrical hole drilled as a fluid passage. Plug valves use cylindrical or conically tapered rotors called plugs. Other round shapes for rotors are possible as well in rotor valves, as long as the rotor can be turned inside the valve body.
After frying it turns blackish. The fried plantain chips are then stuffed carefully into a special conically shaped woven basket about high. This special dodo can have a preservative quality that lasts up to two months without refrigeration. Matooke, or matoke, is a cooking banana dish of the Baganda, now widely prepared in Uganda, Tanzania, Rwanda and eastern Congo.
The common ostrich heart is a closed system, contractile chamber. It is composed of myogenic muscular tissue associated with heart contraction features. There is a double circulatory plan in place possessing both a pulmonary circuit and systemic circuit. The common ostrich's heart has similar features to other avian species like having a conically shaped heart, and being enclosed by a pericardium layer.
Sexes are similar in color and size. Adults are generally lighter in color than juveniles, who have more of a gray hue. This species has a conically shaped face, which is covered in a thin layer of hair. The area below and in front of the eyes is bare, and the frontal portion of the face is sunken around the eyes.
In 1795 he had two 30-pound (14 kilogram) mortars cast, with conically drilled bases and a greater charge, for a firing range up to 3000 metres (3300 yards). The old 60 lb (27 kg) mortars had a range of only 1800 m (2000 yd). In September 1802 Vega was reported missing. After a few days' search his body was found.
Super duplex plug valve. Plug valves are valves with cylindrical or conically tapered "plugs" which can be rotated inside the valve body to control flow through the valve. The plugs in plug valves have one or more hollow passageways going sideways through the plug, so that fluid can flow through the plug when the valve is open. Plug valves are simple and often economical.
Both the Sperm whale and Killer whale have conically shaped teeth with a small amount of enamel at the tips and the rest of the tooth covered by cementum. The cross-sections of the teeth are rounded or oval. A characteristic feature is that the dentin forms in layers that alternate directions giving it a banded appearance. Their teeth are second in hardness to hippopotamus ivory.
The general design was distantly reminiscent of the Stahlhelm, but with some considerable alterations. The general structure and depth were similar, but the brim was shortened, opened wider and more gradually turned. The ventilation apertures were retained, but set in smaller rounded fittings. The angles of the side and upper surfaces were conically increased with the aim of causing hits of over 90° angle to ricochet.
The colour of the shell is white, only the tip is smooth. The spire is conical, scalar, in consequence of the drooping projecting shoulder at the top of each whorl. The protoconch consists of 3½ embryonic whorls, which are conically globose, smooth, keeled, closely, roundedly ribbed, with a deepish suture, and rise to a minute point (crushed). The whorls number 8½ in all, a little bunchy and disorderly.
The original castle consists of an angular, Neo-Gothic three-story building, with two circular turrets, roofed conically in grey slate, mullioned windows, and colonnaded galleries. A new extension, dating from 1967, consists of two low detached blocks and a seven-story block, and a detached restaurant. The modern office buildings are of reinforced concrete frame construction, extensively glazed with steel sun blinds, connected by glazed steel walkways.
Arenal in November 2006 Arenal Volcano () is an active andesitic stratovolcano in north-western Costa Rica around northwest of San José, in the province of Alajuela, canton of San Carlos, and district of La Fortuna. The Arenal volcano measures at least high. It is conically shaped with a crater in diameter. Geologically, Arenal is considered a young volcano and it is estimated to be less than 7,500 years old.
The length of the shell varies between 4 mm and 5.5 mm. (Original description) The shell is regularly and conically fusiform, of rather dark brown colour with bright lilac granules. It contains seven rounded whorls, reticulated with very thick somewhat distant ridges, forming at the points of intersection, three rows of large, pearl-like, slightly oblong granules. On the body whorl these three rows of granules are repeated.
The fan-vaulted south range of the cloister at alt=View along a stone cloister passage showing the conically shaped sections of the vault, and the carved stone panelling of the walls. Secondly, there was a group of monastic cathedrals in which the bishop was titular abbot. These cathedrals are Canterbury, Carlisle, Durham, Ely, Norwich, Rochester, Winchester and Worcester. These monasteries were Benedictine except in the case of Carlisle, which was Augustinian.
The story is that in 1513 when the left- handed Sir Andrew Kerr came back from the Battle of Flodden, he had his men learn to use their left hands when swordfighting. In Scotland, left-handedness has been dubbed "Corrie-fisted" or "Kerr-handed". Ferniehirst also has a romantic array of conically-capped corner turrets. These – known as studies – are not primarily defensive: they open from the rooms of the upper floor.
Hungarian Journal of English and American Studies (HJEAS), Fall, 2011, Vol. 17, No. 2 (Fall, 2011), pp. 453-456 Fitzgerald also uses the book as a prop in his story "The Offshore Pirate"; the character Ardita is reading Revolt, herself looking, says Griffin, "conically angelic...reading a book about angels ". Fitzgerald draws attention to Revolt five times in the story; he argues that France's work is the more romantic of the two.
Montacute is a village and civil parish in Somerset, England, west of Yeovil. The village has a population of 831 (2011 census). The name Montacute is thought by some to derive from the Latin "Mons Acutus", referring to the conically acute St Michael's Hill dominating the village to the west. An alternative view is that it is named after Drogo de Montagu, whose family originated from Montaigu-les-Bois, in the arrondissement of Coutances.
Potential and ln(R) of the ball-pen probe for different positions of the collector. A ball-pen probe consists of a conically shaped collector (non-magnetic stainless steel, tungsten, copper, molybdenum), which is shielded by an insulating tube (boron nitride, Alumina). The collector is fully shielded and the whole probe head is placed perpendicular to magnetic field lines. When the collector slides within the shield, the ratio R varies, and can be set to 1.
When the plug is conically tapered, the stem/handle is typically attached to the larger diameter end of the plug. Plug valves usually do not have bonnets but often have the end of the plug with the handle exposed or mostly exposed to the outside. In such cases, there is usually not much of a stem. The stem and handle often come in one piece, often a simple, approximately L-shaped handle attached to the end of the plug.
For either standard taper joints or ball-and-socket joints, inner and outer joints with the same numbers are made to fit together. When the joint sizes are different, ground glass adapters may be available (or made) to place in between to connect them. Special clips or pinch clamps may be placed around the joints to hold them in place. Round-bottom flasks often have one or more conically tapered ground glass joint openings, or necks.
The use of a special very small size of conically tapered fitting for glass, plastic, or metal parts called a Luer fitting or adapter has become more widespread. Originally, Luer fittings were used to connect the hub of a needle to a syringe. Where the use of ground glass presents a problem, as in the production or distillation of diazomethane (which may explode on contact with rougher surfaces), equipment with smooth glass joints may be used.
The shell grows to a length of 21 mm. (Original description) The strong shell is white and dark-brown tipped. It has a biconical shape, with a short stout scalar spire, angulated whorls, a roundly contracted marginated suture, and a small body whorl conically narrowed into a small unequal-sided snout. Sculpture. Longitudinal sculpture—on the earlier whorls there are very small, narrow, oblique ribs originating in a mid-whorl row of tubercles, but on the body whorl the riblets almost disappear.
Morongo is one of only six AAA four-diamond casino resorts in California, with Barona Casino, Viejas Casino, Pechanga Resort and Casino, Thunder Valley Casino Resort and the Chumash Casino Resort being the others. Morongo's main casino floor is with over 2,000 slots and table games. Upon entering the casino, guests see a contemporary, retro-1960s interior. Light coves between overhead vaults, back- lit fabric draped between frames, and conically shaped light fixtures create a complex, ornate ceiling above the casino floor.
A conically shaped rotary valve. The Thayer Axial-Flow Valve is a replacement for the traditional rotary valve found on trombones with F attachments. Invented by Orla Ed Thayer (with assistance from Zig Kanstul) in 1976, it was the biggest advance in the design of the trombone since the rotary valve was added (creating the F attachment) in the mid-19th century. The valve was the subject of a protracted legal battle between Orla Ed Thayer and James Nydigger, an early business partner.
Advertising appealed to both patriotism and the concept that bras and girdles were somehow "protection". Dress codes appearedfor example, Lockheed informed their workers that bras must be worn because of "good taste, anatomical support, and morale". Military terminology crept into product marketing, as represented by the highly structured, conically pointed Torpedo or Bullet bra, designed for "maximum projection". The bullet bra was worn by the Sweater Girl, a busty and wholesome "girl next door" whose tight-fitting outergarments accentuated her artificially enhanced curves.
The inverse gain technique was so effective against early tracking radars that these radars began using a system known as CORSO, conical-on- receive-signal-only. CORSO typically used two antennas, a transmitter with a fixed antenna, and a conically scanning receiver. The lock-on technique works the same as in a normal conical scan radar, but the transmitted signal is constant and denies the transponder information about the scanning rate of the radar. For this reason, this concept is also known as "silent lobing".
Harrison's "sea watch" No.1 (H4), with winding crank The clockwork in Harrison's H4 watch Harrison's first "sea watch" (now known as H4) is housed in silver pair cases some in diameter. The clock's movement is highly complex for that period, resembling a larger version of the then-current conventional movement. A coiled steel spring inside a brass mainspring barrel provides 30 hours of power. This is covered by the fusee barrel which pulls a chain wrapped around the conically shaped pulley known as the fusee.
Romani from Sacromonte in Granada—wearing a catite. The sombrero de catite or simply catite is a traditional Andalusian hat, which received its name from a conically shaped sweet.Definition of sombrero de catite, Diccionario de la lengua española de la Real Academia Española (DRAE)Definition of catite, DRAE It is a hat with a high conical crown and a wide brim whose upturned edge forms a rectangular profile. A kerchief, tied at the back and covering the head, is usually worn under the catite.
Slightly conically tapered metal (often brass) plug valves are often used as simple shut-off valves in household natural gas lines. It is also possible for a plug valve to have more than two ports. In a 3-way plug valve, flow from one port could be directed to either the second or third port. A 3-way plug valve could also be designed to shift flow between ports 1 and 2, 2 and 3, or 1 and 3, and possibly even connect all three ports together.
Chak-pur are the traditional tools used in Tibetan sandpainting to produce mandalas. They are conically shaped metal funnels and often have ridges down the sides. Normally about in length, they taper to a fine point and are made with varying diameter holes at the end in order to disperse the sand in a controlled way. A Tibetan monk will usually tap glide a piece of wood over the ridges in order to slowly allow the sand to emerge through the hole through the vibrations created.
A diagram of the anatomy of the maxillae in centipedes In centipedes, both pairs of maxillae are developed. The first maxillae are situated ventrally to the mandibles and obscure them from view. This pair consists of a basal plate formed from the fused coxae of each leg plus ventral sternite from this segment and is hence called a coxosternite and two pairs of conically jointed appendages called telopodites and coxal projections. The second maxillae, which partly cover the first maxillae, consist of only a telopodite and a coxosternite.
The mouth is more densely pubescent and hairy. The corolla tube is 4.4 to 6 times as long as the calyx, which is 1.13 to 1.22 times as long as the corolla lobes. Therefore, the corolla tube is 15 mm (inch) to 23 mm (inch) long. Its basal part is almost cylindrical, but often conically widened at the base. It is 0.39 to 0.44 times the length of the entire tube at 7 mm (0.276-inch) to 9 mm (0.354-inch) long by 2 mm (0.079-inch) to 4.8 mm (0.189-inch) wide.
The particular wavelength of the surface waves is determined by the wavelength of the microwave radiation emitted from the scatterometer's radar. QuikSCAT consists of an active microwave radar that infers surface winds from the roughness of the sea surface based on measurements of radar backscatter cross section, denoted as σ0. σ0 varies with surface wind speed and direction relative to the antenna azimuth, incidence angle, polarization, and radar frequency. QuikSCAT uses a dual-beam, conically scanning antenna that samples the full range of azimuth angles during each antenna revolution.
The smokebox extended well forward of the blast pipe and chimney, to provide space for a spark arrestor, and baffle plates that were the forerunners of the self- cleaning smokebox. The driving position was on the right-hand side, with the valve gear controlled by a ‘Johnson Bar’ lever and ratchet system. The regulator was a typical American pull-out lever with notched sector plate and graduation. The regulator itself was of the balanced, conically-seated type which, in later years, became the standard for locomotives from the 2-8-2 X-class and onward.
The R.511 entered service in 1957, replacing the R.510. The R.511 used a Thompson-CSF semi-active radar homing head which was tuned to home on to reflections of the launch aircraft's radar; its antenna scanned conically 8° off the boresight of the missile at a rate of 225 revolutions per second. For longer range firing, guidance commands were transmitted directly to the missile via an antenna on the trailing edge of the missile's wing. Limitations of the launch aircraft's radar restricted operation to above .
Crude versions of conically tapered ground glass joints have been made for quite a while, particularly for stoppers for glass bottles and retorts. These days, ground glass joints can be precisely ground to a reproducible taper or shape. They are made to join two glassware pieces together. One of the glassware items to be joined would have an inner (or male) joint with the ground glass surface facing outward and the other would have an outer (or female) joint of a correspondingly fitting taper with the ground glass surface facing inward.
A ball check valve is a check valve in which the closing member, the movable part to block the flow, is a ball. In some ball check valves, the ball is spring-loaded to help keep it shut. For those designs without a spring, reverse flow is required to move the ball toward the seat and create a seal. The interior surface of the main seats of ball check valves are more or less conically- tapered to guide the ball into the seat and form a positive seal when stopping reverse flow.
It is as if light emitted by a moving object is concentrated conically, towards its direction of motion; an effect called relativistic beaming. Also, light received by a moving object (e.g. the view from a very fast spacecraft) also appears concentrated towards its direction of motion. One consequence of this is that a forward observer should normally be expected to intercept a greater proportion of the object's light than a rearward one; this concentration of light in the object's forward direction is referred to as the "searchlight effect" (or headlight effect).
If the hollow is properly shaped (usually conically), the enormous pressure generated by the detonation of the explosive drives the liner in the hollow cavity inward to collapse upon its central axis. The resulting collision forms and projects a high-velocity jet of metal particles forward along the axis. Most of the jet material originates from the innermost part of the liner, a layer of about 10% to 20% of the thickness. The rest of the liner forms a slower-moving slug of material, which, because of its appearance, is sometimes called a "carrot".
The colour is almost papyraceous white. The spire is subscalar, narrow, and would be high but for the abruptness with which it is crowned by the apex, consisting of four yellow conically globose whorls, of which the last is large and dome-shaped, and the first minute, prominent, but at the very tip slightly bent down. The first two are smooth ; the last two are sparsely crossed by minute cusplike threads or riblets. The shell contains7 to 8 iwhorls in all, rather high, with a drooping shoulder in the sinus area, which is defined by the angulation below.
During the installation cycle of a lockbolt, the collar is deformed around the pin with locking grooves using special tooling. The tool engages onto the pintail, which is an extra portion of pin material protruding past the collar that the tool grabs and pulls. This force on the pintail pushes the joint together, and the conically-shaped cavity of the tooling is forced down the collar, which reduces its diameter and progressively swages the collar material into the grooves of the harder pin. As the force required for swaging increases during the process, the installation is finalised when the pintail breaks off.
Kamper designed the French Renaissance Châteauesque station as two structures connected by an arcade. The main building, used as office space, is a -story structure measuring seventy-two feet long by forty-five feet wide. The smaller building, initially used as a carriage house and later as a garage, is also a -story structure, and measures forty-six feet long by thirty feet wide. Both buildings are constructed of limestone on the first floor and brick on the second, and feature high pitched roofs, conically roofed towers, and elaborate stone dentils which give the impression, especially on the towers, of castle battlements.
The flow-directing possibilities in multi-port plug valves are similar to the possibilities in corresponding multi-port ball valves or corresponding multi-port valves with a rotor. An additional possibility in plug valves is to have one port on one side of the plug valve and two ports on the other side, with two diagonal and parallel fluid pathways inside the plug. In this case the plug can be rotated 180° to connect the port on the one side to either of the two ports on the other side. Stopcocks used in laboratory glassware are typically forms of conically tapered plug valves.
For example, needle valves have elongated conically-tapered discs and matching seats for fine flow control. For some valves, there may be a mechanism to indicate by how much the valve is open, but in many cases other indications of flow rate are used, such as separate flow meters. In plants with remote-controlled process operation, such as oil refineries and petrochemical plants, some 2-way valves can be designated as normally closed (NC) or normally open (NO) during regular operation. Examples of normally-closed valves are sampling valves, which are only opened while a sample is taken.
An Stuc 3D map An Stùc, meaning "The Peak" in Gaelic, is a conically shaped Scottish mountain in the Ben Lawers range to the north of Loch Tay. It has been listed as a Munro since 1997, having previously been considered a subsidiary top of the Ben Lawers range. It lies on the main ridge of the Ben Lawers range, and its southern and eastern slopes form part of the Ben Lawers National Nature Reserve, which is owned and managed by the National Trust for Scotland. The normal routes of ascent are via the ridges from Ben Lawers or Meall Garbh, in combination with other summits in the range.
The square, massive Norman tower has three-arched belfry windows on each face, surmounted by corner turrets, and a conically-shaped tower of octagonal proportions, topped again by a short steeple. The tower was a main viewing point for the Anglo-French Survey (1784–1790) which linked the Paris Observatory with the Royal Greenwich Observatory using trigonometry. Cross- channel sightings were made of signal lights at Dover Castle and Fairlight, East Sussex. The church was assigned as a historic monument by decree of 10 September 1913, only to have its stained glass smashed during a Zeppelin bombardment on 15 January 1915, falling through the roof.
Conventionally, these joints at the flask necks are outer joints. Other adapters, such as distillation heads and vacuum adapters, are made with joints that fit in with this convention. If a flask or other container has an extra outer ground-glass joint on it, which needs to be closed off for an experiment, there are often conically tapered inner ground- glass stoppers for that purpose. In some cases, small hook-like glass protrusions may be fused onto the rest of the glass item near a joint to allow an end loop of a small spring to be attached, so the spring helps keep joints temporarily together.
Bend stiffeners are conically shaped polymer mouldings designed to add local stiffness to the product contained within, limiting bending stresses and curvature to acceptable levels. Bend stiffeners are generally suitable for water depths of 35 metres or less, and their suitability is highly dependent on currents and seabed conditions at site. Extreme care must be taken when selecting a stiffener, especially relating to the lifespan of the system as these themselves can become fatigued/fragile. As the stiffness of these products are dependent upon the nature of the plastic used, careful testing and QA of plastics should be carefully considered as flaws introduced during material manufacture, processing, machining and molding.
The FPS-16 radar at Vandenberg AFB, California has been used for tracking NASA space vehicles since the 1960s.The C-band monopulse tracking radar (AN/FPS-16) used in the Project Mercury was inherently more accurate than its S-band conically-scanned counterpart, the Very Long Range Tracking (VERLORT) radar system. The AN/FPS-16 radar system was introduced at the Atlantic Missile Test Range with installations including Cape Canaveral, Grand Bahama, San Salvador, Ascension and East Grand Bahama Island between 1958 and 1961. The FPS-16 located on the Australian Weapons Research Establisnment Range at Woomera, in South Australia was also linked to the NASA network for Mercury and later missions.
A keck clamp in use A reflux set- up with conically tapered ground glass joints connecting the coil condenser with an adapter to allow inert gas (nitrogen or argon) to leave the vessel (top) and two-necked flask. Another ground glass joint connects the second neck to another adapter for introduction of an inert gas. The handling of the high grade stainless steel joint clips for conical ground glass joints Plastic joint clips for holding cone and socket joints together. Three sizes: red (29), green (24), yellow (14) To prevent a joint from separating during a reaction process, various types of plastic or metal clips or springs can be used to secure the two sides together.
The Faule Mette (German for Lazy Mette, alluding to the gun's rare deployment, difficult mobility, and limited loading and fire rate) or Faule Metze was a medieval large-calibre cannon of the city of Brunswick, Germany. Cast by the gunfounder Henning Bussenschutte on the central market square Kohlmarkt in 1411, it was fitted with a conically tapered muzzle (calibre of 67–80 cm) which allowed the use of projectiles of varying size. Thus, it could fire stone balls weighing between with a gunpowder load ranging from . On 1 November 1717, the Faule Mette reportedly shot a stone ball The cast-bronze cannon was melted down in 1787 and recast to several lighter field guns, having fired only twelve times in its history.
Libognathus is known from a single holotype specimen including the left dentary bone and coronoid process of the lower jaw, as well as six teeth implanted in the jaw. Libognathus can be identified as a procolophonid by its wide molar-like teeth, each of which has a ridge running along its width and several projections or cusps around it. It is considered a member of the procolophonid subfamily Leptopleuroninae based on the presence of more conically-shaped teeth at the front of the jaw. Libognathus is distinguished from other procolophonids by the steep angle of the lower margin of the dentary (indicating a deeper lower jaw than in related procolophonids such as Hypsognathus and Leptopleuron) and a small hole or foramen on the jaw's outer surface below the fifth tooth.
The outlet of the CGA 850 valve is on a flat surface on the valve body, inside a concentric face-sealing O-ring groove, with a conical indentation on the opposite surface of the valve body, co-axial with the O-ring groove. The yoke clamp fits around the valve body and the sealing face of the regulator inlet seats over the O-ring groove. A conically tipped screw locates in the indentation and when tightened, presses against the valve body and pulls the sealing face of the regulator inlet against the O-ring. This screw must be tightened sufficiently to maintain metal-to-metal contact between the regulator inlet and the valve body when the valve is opened at full cylinder pressure, and under normal working loads including minor impacts and using the regulator as a handle to lift the set, to prevent failure of the seal by O-ring extrusion and consequent loss of breathing gas.
The current church was designed by George H. Guernsey (1839-1900), a self-taught architect who had served for a term as mayor of Montpelier, Vermont in 1897, and had designed a number of prominent buildings in Vermont and New Hampshire, including a number of catholic churches, such as; St. Augustine Church (Montpelier, VT), Immaculate Heart of Mary Church (Rutland, VT), Notre Dame de Victories Catholic Church (St. Johnsbury, VT), and the Sacred Heart Saint Francis de Sales Roman Catholic Church (Bennington, VT); as well as churches for other denominations, including; the Methodist Episcopal Church (Barton, VT) and the United Baptist Church of Lakeport (Laconia, NH). Of his architectural style, it has been stated that Guernsey employed dramatic corner towers and asymmetrical massings in his designs, often combining "square- spired" and "conically topped round towers". A historical report by the Vermont Division for Historic Preservation considers the architectural style of the church to be Victorian Gothic and emphasizes its variety of gothic arches and wall buttresses that were constructed in "a highly eclectic style".

No results under this filter, show 78 sentences.

Copyright © 2024 RandomSentenceGen.com All rights reserved.