The Garshelis effect is the effect wherein a circumferentially magnetized rod of ferromagnetic, magnetostrictive material generates a net axial magnetic field in response to an applied torque.
|
|
The tympanum is small but distinct. The fingers and toes are depressed. Finger tips have no discs but have asymmetrically pointed tips. The toes have circumferentially grooved, asymmetrically pointed discs.
|
|
The large, rectangular auditory is located on the upper floor and is circumferentially equipped with a matroneum. The wall is segmented with alternating arches and pilasters. Lunette caps with plaster busts of famous medics are located above them. The coffered ceiling is made of stucco.
|
|
Welded circumferentially to the exterior surface is aluminum structural T-section members that are deep and wide. The doors of the test chamber are in size and have double door seals to prevent leakage. The chamber floor was designed for a load of 300 tons.
|
|
It is an outpatient or office-based procedure. The equipment consists of a vapor generator and a transurethral delivery device. The latter is similar to a cystoscope with an optical system with a 90° extending retractable 10.25 mm long injection needle (diameter 1.3 mm). From this needle water vapor is circumferentially delivered via 12 holes at the needle’s tip.
|
|
Grooves run circumferentially around the tire, and are needed to channel away water. Lugs are that portion of the tread design that contacts the road surface. Grooves, sipes and slots allow tires to evacuate water. The design of treads and the interaction of specific tire types with the roadway surface affects roadway noise, a source of noise pollution emanating from moving vehicles.
|
|
The scleral spur is an annular structure composed of collagen in the human eye, a protrusion of the sclera into the anterior chamber. It is the origin of the longitudinal and circular fibres (which swerve acutely from the spur to run circumferentially as a sphincter near the periphery of the lens) of the ciliary muscle and is attached anteriorly to the trabecular meshwork.
|
|
The corrugations run chordwise, rib-like, in the wings and tail and circumferentially in the fuselage. The tail structures have a foam plastic core. It is powered by a flat 4-cylinder, 200 hp (150 kW) Lycoming IO-360 engine and has a tricycle undercarriage with inward retracting main legs and an aft retracting nosewheel. The first flight was on 29 March 1968.
|
|
A wearable neuromodulation device that delivers electrical stimulation to nerves in the wrist is now available by prescription. Worn around the wrist, it acts as a non-invasive treatment for those living with Essential Tremor. The stimulator has electrodes that are placed circumferentially around a patient's wrist. Positioning the electrodes on generally opposing sides of the target nerve can result in improved stimulation of the nerve.
|
|
Sperm mitochondria differ in morphology and subcellular localization from those of somatic cells. They are elongated, flattened, and arranged circumferentially to form a helical coiled sheath in the midpiece of the sperm flagellum. The protein encoded by this gene localizes to the capsule associated with the mitochondrial outer membranes and is thought to function in the organization and stabilization of the helical structure of the sperm's mitochondrial sheath.
|
|
This breakthrough technology gave a substantially increased product life (MTBF > 500,000 hours); with its shock resistance (>300G), it should qualify for "tactical" (mid-accuracy) applications. The resonator is operated in its second-order resonant mode. The Q-factor is usually about 20,000; that pre-determines its noise and angular random walks. Standing waves are elliptically-shaped oscillations with four antinodes and four nodes located circumferentially along the rim.
|
|
The tire bead is the part of the tire that contacts the rim on the wheel. The bead is typically reinforced with steel wire and compounded of high strength, low flexibility rubber. The bead seats tightly against the two rims on the wheel to ensure that a tubeless tire holds air without leakage. The bead fit is tight to ensure the tire does not shift circumferentially as the wheel rotates.
|
|
It has been theorized that pearly penile papules stimulate the female vagina during sexual intercourse. In addition, pearly penile papules secrete oil that moistens the glans of the penis. The papules appear as one or several rows of small, pearly or flesh-colored, smooth, dome- topped bumps situated circumferentially around the corona or sulcus of the glans. They may range in size from less than 1 mm to 3 mm.
|
|
Spectral domain optical coherence tomography can be used to view collector channel diameter change, collapse or patency. Like human eyes, pig eyes have more outflow along the nasal drainage system than the temporal angle. Trabecular meshwork removal from the nasal can enhance outflow beyond physiological levels. It can also cause fluorescein to flow circumferentially, through small connections between Schlemm's canal-like segments, typical of a pig's angular aqueous plexus [3-5].
|
|
Popular Cycling, August 1970 TT100s were first made in England, and then later reintroduced from Japan,. The tyres featured a unique "Trigonic", or triangular, profile which provided ample outstanding grip for the day,Walneck's Classic Cycle Trader, January 1999, Dominion Enterprises, and an identical tread pattern to front and rear instead of the usual circumferentially ribbed front tyre of the day. Considered a "super tyre",Motorcycle mechanics. George Lear, Lynn S. Mosher.
|
|
Because the final diameter of the workpiece is always less than the starting diameter, the workpiece must thicken, elongate radially, or buckle circumferentially. A more involved process, known as reducing or necking, allows a spun workpiece to include reentrant geometries. If surface finish and form are not critical, then the workpiece is "spun on air"; no mandrel is used. If the finish or form are critical then an eccentrically mounted mandrel is used.
|
|
The sniper's badge was made of greenish-gray cloth, embroidered and oval shaped. It depicts a black eagle's head turned to its left with white plumage, ochre yellow-colored eyes and closed beak. The eagle's body is covered by three oak leaves and a left mounted acorn. The edges of the ribbon are sewn and the three stages are distinguished by a circumferentially sewn cord in silver (2nd class) or gold (1st class).
|
|
Their mantle contains a layer of muscle sandwiched between elastic fibers. The muscle fibers run around the bell circumferentially while the elastic fibers run through the muscle and along the sides of the bell to prevent lengthening. After making a single contraction, the bell vibrates passively at the resonant frequency to refill the bell. However, in contrast with scallops, the inertial work is similar to the hydrodynamic work due to how medusas expel water - through a large opening at low velocity.
|
|
The costamere is a structural-functional component of striated muscle cells which connects the sarcomere of the muscle to the cell membrane (i.e. the sarcolemma).20: 2327-2331 Costameres are sub-sarcolemmal protein assemblies circumferentially aligned in register with the Z-disk of peripheral myofibrils. They physically couple force-generating sarcomeres with the sarcolemma in striated muscle cells and are thus considered one of several "Achilles' heels" of skeletal muscle, a critical component of striated muscle morphology which, when compromised, is thought to directly contribute to the development of several distinct myopathies.
|
|
Overall, non-metallic posts show a lower incidence of root fracture due to their ability to resist high stress without permanent deformation and breaking. Non-metallic posts should not be used if there is insufficient sound tooth tissue (ferrule). The sound tooth tissue should be at least 1.5 mm circumferentially further apical to the core. Non- metallic posts are also more aesthetic than metal posts as metal posts will shine through all-ceraminc restorations and non-metallic posts' optical properties are closer to tooth tissue (except for carbon fibre posts due to the darker material).
|
|
This new travel center will consist of a hotel and several shopping estates. This center will connect all public transportation from commuter trains to long-distance buses. Turku's most significant highways for traffic are Highway 1 leading to Helsinki; Highway 10 leading to Hämeenlinna; Highway 9 leading to Tampere, Jyväskylä, Kuopio and Joensuu; Highway 8 leading to Pori, Vaasa and Oulu; and the Turku Ring Road, which protrudes circumferentially from Turku. Turku Airport is located to the north of the city centre, partly in the neighbouring municipality of Rusko.
|
|
For the corpus luteum, a dominant ovulating follicle that typically appears as a cyst with circumferentially thickened walls and crenulated inner margins, follow up is not needed if the cyst is less than 3 cm in diameter. In postmenopausal patients, any simple cyst greater than 1 cm but less than 7 cm needs yearly follow-up, while those greater than 7 cm need MRI or surgical evaluation, similar to reproductive age females. An Axial CT demonstrating a large hemorrhagic ovarian cyst. The cyst is delineated by the yellow bars with blood seen anteriorly.
|
|
The angle between the plane of contact between tool and fastener and the circumferentially directed force is much closer to 90° in a Torx type of head (lower) than in a conventional hex head (upper). By design, Torx head screws resist cam-out better than Phillips head or slot head screws. Whereas the tendency of Phillips drivers to cam out under excessive torque has been listed as a feature preventing damage to the screw-head or driver, Torx heads were designed to prevent cam-out. The development of better torque-limiting automatic screwdrivers for use in factories allowed this change.
|
|
Salamey further investigated the relationship of magnetic flux to circumferential area about the magnetic field where most of the magnetic forces were found to create mechanical forces used to direct the motion of the piston. Salamey further describes, in his second patent, the incorporation of a magnetic field gap. The gap is defined as a region of non-magnetic conduction circumferentially located at either end of the piston bore. The magnetic gap allows for increased propagation of magnetic flux through the magnetic piston body causing an increased force pulling the piston towards the magnetic end- pole (Salamey, 1999).
|
|
The most important[according to whom?] indirect methods are currently inverse filtering of either microphone or oral airflow recordings and electroglottography (EGG).[citation needed] In inverse filtering, the speech sound (the radiated acoustic pressure waveform, as obtained from a microphone) or the oral airflow waveform from a circumferentially vented (CV) mask is recorded outside the mouth and then filtered by a mathematical method to remove the effects of the vocal tract. This method estimates the glottal input of voice production by recording output and using a computational model to invert the effects of the vocal tract.
|
|
In the centrifugal pumps, the rotors are shaped to accelerate the blood circumferentially and thereby cause it to move toward the outer rim of the pump, whereas in the axial flow pumps the rotors are more or less cylindrical with blades that are helical, causing the blood to be accelerated in the direction of the rotor's axis. An important issue with continuous flow pumps is the method used to suspend the rotor. Early versions used solid bearings; however, newer pumps, some of which are approved for use in the EU, use either magnetic levitation ("maglev")Smart, Frank. "Magnetic levitation heart pump implanted in first U.S. patient".
|
|
Kliper's design was another attempt to solve the geometric problems of spacecraft. Soyuz has an Orbital Module, a hollow sphere, to be used for eating and hygiene, and an airlock located above the Reentry module (the capsule), with the docking mechanism at the top. In the event of an emergency, it would be lifted away from the rocket along with the reentry module, and the fairing over the spacecraft was designed to successfully split apart either circumferentially just below the reentry module in such an emergency or longitudinally if the flight should be successful. Kliper was designed with the Orbital Module below its reentry module, and the docking mechanism below that.
|
|
A mosquito net is a type of meshed curtain that is circumferentially draped over a bed or a sleeping area, to offer the sleeper barrier protection against bites and stings from mosquitos, flies, and other pest insects, and thus against the diseases they may carry. Examples of such preventable insect-borne diseases include malaria, dengue fever, yellow fever, zika virus and various forms of encephalitis, including the West Nile virus. To be effective the mesh of a mosquito net must be fine enough to exclude such insects without obscuring visibility or ventilation to unacceptable levels. It is possible to increase the effectiveness of a mosquito net greatly by pretreating it with an appropriate insecticide or insect repellent.
|
|
Chennai Beach railway station for some Chennai urban trains. George Town remains the geographical and geometrical focal point of Chennai where all the radial roads and railroads of the city converge. The arterial roads, namely, North and South Beach Roads, Anna Salai, Poonamallee High Road, Grand Northern Trunk Road, and Ennore High Road radiate from the neighbourhood, and both the primary terminal railway stations of the city, namely, Chennai Central and Chennai Beach borders the western and eastern sides of the neighbourhood. In addition to the two terminal stations, many suburban railway stations are located circumferentially around the neighbourhood, namely, Chennai Central Suburban, Chennai Fort, Chennai Park and Park Town, all located in the south and southwest fringes, Basin Bridge Junction at the western fringe, and Royapuram railway station at the northern fringe.
|
|
Some of the earliest versions of practical motors in the 1970s, by Sashida, for example, used standing-wave vibration in combination with fins placed at an angle to the contact surface to form a motor, albeit one that rotated in a single direction. Later designs by Sashida and researchers at Matsushita, ALPS, and Canon made use of traveling-wave vibration to obtain bi-directional motion, and found that this arrangement offered better efficiency and less contact interface wear. An exceptionally high-torque 'hybrid transducer' ultrasonic motor uses circumferentially-poled and axially-poled piezoelectric elements together to combine axial and torsional vibration along the contact interface, representing a driving technique that lies somewhere between the standing and traveling-wave driving methods. A key observation in the study of ultrasonic motors is that the peak vibration that may be induced in structures occurs at a relatively constant vibration velocity regardless of frequency.
|
|
Most of the men standing along the bow stairway either fell aft into the fire, or tried to leap from the ship when it was still too high in the air. Three of the four men standing on the mooring shelf inside the very tip of the bow were actually taken from the wreck alive, though one (Erich Spehl, a rigger) died shortly afterwards in the Air Station's infirmary, and the other two (helmsman Alfred Bernhard and apprentice elevatorman Ludwig Felber) were reported by newspapers to have initially survived the fire, and then to subsequently have died at area hospitals during the night or early the following morning. Hydrogen fires are less destructive to immediate surroundings than gasoline explosions because of the buoyancy of H2, which causes heat of combustion to be released upwards more than circumferentially as the leaked mass ascends in the atmosphere; hydrogen fires are more survivable than fires of gasoline or wood.Werthmüller, Andreas.
|
|
The engineering of a bearing's Babbitt lining is usually completed during the design of the machine. In selecting the proper type of Babbitt for a particular job there are a number of factors to take into consideration, the most important of which are as follows: # Surface speed of the shaft # Load that the bearing is required to carry There is no doubt that if a bearing is to be highly loaded in relation to its size, a high tin alloy is desirable; whereas for much slower speed work and less heavily loaded bearings, a lead-Based Babbitt may be employed, and is far more economical. 1\. Surface speed of the shaft: (The number of feet traveled per minute by the shaft circumferentially.) Formula: (Pi x D x RPM) / 12 = S Example: Determine the surface of a 2 inch diameter shaft going 1,400 revolutions per minute (RPM) (Pi x D x RPM) / 12 = (3.1416 x 2 x 1,400) / 12 = 733.04 Ft/min Where: Pi = 3.1416, D = Diameter of shaft, S = Surface speed of the shaft 2\. Load bearing is required to carry: (the weight which is being exerted through the combined weights of the shaft and any other direct weights on the shaft and measured in pounds per square inch.) Formula: W / (I.
|
|