The metastases didn't appear to spread centrifugally; they appeared in discrete, anatomically distant sites.
|
|
Eventually, though, Fake spins out a centrifugally-fluttering cloud of technicolor synths, nudging the track's mood towards optimism.
|
|
Capable of dealing out hundreds of high-velocity, centrifugally expelled rounds per minute, the spinner quelled any lustful thoughts.
|
|
After beef blood has been centrifugally subdivided and left in metal test tubes awhile, its smell could level a city.
|
|
It's important to know, for example, that the exquisite, centrifugally spinning collages of the New York artist Anne Ryan (1889-1954) were inspired as much by life as by other art.
|
|
With Angela Merkel in Germany fighting for her political survival seeking to hold together a tenuous coalition, Italy with little government at all, Spain spinning apart centrifugally as Catalonia seeks to exit the country, and Britain on the verge of catapulting itself away from the Continent under Brexit, while Trump's America makes threatening noises on trade, defense and Iran, and Vladimir Putin threatens return of decidedly cold war, Macron needs to hold his year-old presidency together.
|
|
"Handbook of Cast Iron Pipe", Third Edition, Cast Iron Pipe Research Association, 1967. Standards for cast-iron pipe centrifugally cast in sand molds for water were established and published by the American Water Works Association."American Standard for Cast-Iron Pipe Centrifugally Cast in Sand-Lined Molds, for Water or Other Liquids", American Water Works Association, A21.8-1962 (AWWA C108-62), 1962.
|
|
After the brain is infected, the virus travels centrifugally to the peripheral and autonomic nervous systems, eventually migrating to the salivary glands, where it is ready to be transmitted to the next host.
|
|
The cylinder liners are made of centrifugally cast iron, two rubber rings seal the liners off from the crankcase. The engine has two cast iron cylinder blocks with two cylinders; every block has a head, which makes two cylinder heads.
|
|
The damaged white matter is known as "Normal- appearing white matter" (NAWM) and is where lesions appear. These lesions form in NAWM before blood–brain barrier breakdown. BBB can be broken centripetally (the most normal) or centrifugally. Several possible biochemical disrupters were proposed.
|
|
Cold-worked steel normally tends to possess increased hardness and decreased ductility, making it difficult to work. Process annealing tends to improve these characteristics. This is mainly carried out on cold-rolled steel like wire-drawn steel, centrifugally cast ductile iron pipe etc.
|
|
In this condition the posterior uveitis shows a geographic pattern. The inflammation begins in the juxtapapillary choroid and intermittently spreads centrifugally. The overlying retinal pigment epithelium and the outer retina are involved in the inflammatory process. A closely related condition is multifocal serpiginoid choroiditis.
|
|
6061 is not an alloy that is traditionally cast due to its low silicon content affecting the fluidity in casting. It can be suitably cast using a specialized centrifugal casting method. Centrifugally cast 6061 is ideal for larger rings and sleeve applications that exceed limitations of most wrought offerings.
|
|
Both engines have individual aluminium cylinder heads for each cylinder.. All other applications had cast iron crankcase / cylinder block. Centrifugally cast iron wet cylinder liners are used with aluminium pistons in both. These pistons have three compression rings and two oil-control rings. The top ring is carried in a cast iron insert.
|
|
Secondaries are replaced from August after the primaries are at the third quill. The secondary moult is not orderly, the 8th and 7th being dropped earlier than the rest. The tail feathers are moulted centrifugally. Seasonal colour changes in the testicular tissues are caused by variation in melanin synthesis, with the dark pigmentation being lost during the breeding season.
|
|
Chloroplasts form an analogous structure out of FtsZ. These structures are not made out of actomyosin, but serve a similar role in constricting and permitting cytokinesis. In plant cells, there is no actomyosin ring. Instead, a cell plate grows centrifugally outwards from the center of the plane of division until it fuses with the existing cell wall.
|
|
Lindberg achieves luminous orchestral effects, holding the sounds poised as if centrifugally. The Philharmonia, now well groomed in his style, made masterly work of its subtleties." Reviewing the United States premiere by the Los Angeles Philharmonic, Mark Swed of the Los Angeles Times wrote, "Magnus Lindberg's Parada begins with a slow parade of chords. They are somber but colorful.
|
|
Agaricus santacatalinensis is a species of agaric fungus. Described as new to science in 1998 by Edgardo Albertó, it is found in deciduous forests of Brazil, where it grows under privets (Ligustrum) and elm (Ulmus). The fruit bodies feature caps that are in diameter with felt-like surfaces. Somewhat unusually, the gills mature centrifugally (from the cap center outward to the edge).
|
|
In 1953, General Motors used this type of body in the Chevrolet Corvette. In 1954, the company invented a process to make centrifugally-spun fiberglass wool, which became the standard process for producing fiberglass insulation. In 1955, Owens-Corning introduced its Perma- Ply roofing material for built-up room insulation covering. The company created its first all fiber (AF) fiberglass wool in 1956.
|
|
The "Ode" has centrifugal tendencies, relying for its effects on elements of history and pottery and visual aesthetics. Cabin has centripetal tendencies, relying on syntax and lexical choice to delineate characters and establish mood. But the one veers inward, the other pushes outward. Criticism reflects these movements, centripetally focusing on the aesthetic function of literature, centrifugally on the social function of literature.
|
|
The predominant form of lining for water applications is cement mortar centrifugally applied during manufacturing. The cement mortar comprises a mixture of cement and sand to a ratio of between 1:2 and 1:3.5. For potable water, portland cement is used; for sewage it is common to use sulfate resisting or high alumina cement. Cement mortar linings have been found to dramatically reduce internal corrosion.
|
|
Centrifugally formed film growth is a process used to form thin layers of materials by using a centrifuge. The process has been used to create silicon for thin-film solar cells and far-infrared photodetectors. Temperature and centrifuge spin rate are used to control layer growth. Centrifugal LPE has the capability to create dopant concentration gradients while the solution is held at constant temperature.
|
|
In 1971, Jean Mantelet filed a patent for a "Salad Dryer," a hand-operated, centrifugally-driven device along with another called the "Household Drying Machine" which could also be used for salads. Mantelet was a prominent designer of domestic appliances and the founder of the French company Moulinex. He patented another salad dryer device in 1974. Mantelet was particularly proud of his salad dryer design.
|
|
Actinic granuloma is a cutaneous condition characterized histologically by a dermal infiltrate of macrophages. Actinic granuloma is an asymptomatic granulomatous reaction that affects sun-exposed skin, most commonly on the face, neck, and scalp. It is characterized by annular or polycyclic lesions that slowly expand centrifugally and have an erythematous elevated edge and a hypopigmented, atrophic center. Advise to reduce exposure to the sun and to use sunscreen.
|
|
No further examples of the P.1052 were built. In hindsight, the P.1052 may be seen as part of a transition from the centrifugally powered, straight-winged Sea Hawk to the axially powered, swept-wing Hunter. The P.1078 – a variant in which the P.1052 was to have been augmented by a small built-in rocket engine (i.e. the Armstrong Siddeley Snarler), became the subject of a design study.
|
|
Cotton candy is a spun sugar confection that resembles cotton. It usually contains small amounts of flavoring or food coloring. The candy is made by heating and liquefying sugar, spinning it centrifugally through minute holes-- by which the sugar rapidly cools and re-solidifies into fine strands. It is often sold at fairs, circuses, carnivals, and festivals--served in a plastic bag or on a stick or paper cone.
|
|
HOBAS NC Line HOBAS Pipeline in Las Vegas HOBAS is a manufacturer of centrifugally cast glassfiber reinforced (GRP) pipe systems made of unsaturated polyester resin with diameters ranging from 150 mm to 3600 mm. The company was founded in Basel, Switzerland in 1957. In 1977 the Wietersdorfer Groupwww.wietersdorfer.com Retrieved March 16, 2012 acquired the license for the pipe production in Austria and became owner of HOBAS to 50% in 1987.
|
|
The Pashkov House has two main facades, one facing the carriageway and being palatial and solemn, the other facing the yard and looking cozier and more like a country estate. The facade looking on to the Mokhovaya Street is characterized by linear expansion. The arrangement centrifugally unwraps around and above. Two one-storey tunnels run to the right and to the left of the central cube ending in two-storied Service wings.
|
|
Depending upon their location, ependymal cells may display 2 cell poles. A luminal pole projects to the ependymal lining of a ventricle and a “submesenchymal pole” projects toward the surface of the brain demonstrating glial processes and peripherally situated footplates. Frieda and Pollak conceptualize the architecture of ependymomas as a primitive neural tube turned inside out with the submesenchymal poles converging toward a central vessel, thus forming a pseudorosette rather than projecting centrifugally toward the pia.
|
|
"American Standard for Cast-Iron Pipe Centrifugally Cast in Metal Molds, for Water or Other Liquids", American Water Works Association, A21.6-1962 (AWWA C106-62), 1962. When casted with sand molds, two types of manufacturing processes were used. In the first method, a metal pattern was typically positioned in a metal flask and molding sand was rammed into the annular space between the flask and pattern. The pattern was then removed for casting of the pipe using molten grey iron.
|
|
Cyclorotor blades require support structure for their positioning parallel to the rotor axis of rotation. This structure, sometimes referred to as "spokes," adds to the parasite drag and weight of the rotor. Cyclorotor blades are also centrifugally loaded in bending (as opposed to the axial loading on propellers), which requires blades with an extremely high strength to weight ratio or intermediate blade support spokes. Early 20th century cyclorotors featured short blade spans, or additional support structure to circumvent this problem.
|
|
The best-known is the fluid flywheel, used for touring cars such as the Daimler (Armstrong Siddeley used a centrifugal clutch). Sports cars used a Newton centrifugal clutch. This was a multiple plate dry clutch, similar to racing manual clutches of the time, but with the pressure plate centrifugally actuated to engage at around 600rpm. Pure racing cars, such as the ERA, avoided a clutch altogether and relied on the progressive engagement of the gearbox's band brake on lowest gear when starting.
|
|
Excavation site of the pillar crypt in the Palace of Malia Around this Central Court the district or ensembles are arranged, whose communication was made possible through corridors and routes. Each of these quarters has been assigned a specific function, but each of these chamber ensembles should be considered on its own, before it is placed in the overall plan. Olivier Pelon differentiated 4 functional areas: representative, residential, cultic-religious and economic (Magazine) From the Central Court, the rooms were centrifugally arranged.
|
|
Spin coating or spin casting, uses a liquid precursor, or sol-gel precursor deposited onto a smooth, flat substrate which is subsequently spun at a high velocity to centrifugally spread the solution over the substrate. The speed at which the solution is spun and the viscosity of the sol determine the ultimate thickness of the deposited film. Repeated depositions can be carried out to increase the thickness of films as desired. Thermal treatment is often carried out in order to crystallize the amorphous spin coated film.
|
|
In May 1942 construction began for Lima Army Tank Plant to manufacture centrifugally cast gun tubes in the steel foundry. This manufacturing method was rendered obsolete, so the army converted it to a tank depot for modifying and processing combat vehicles for export and domestic shipping. In November 1942, a GM subsidiary, United Motors Services, took over operation of the plant to process vehicles under government contract. The plant prepared many vehicles for Europe, including the M5 light tank and the M26 Pershing tank.
|
|
Each stele is made up of diarch (centre of origin on the inside, later cells are added centrifugally) and exarch (centre of origin located laterally, later cells are added centripedally) xylem in centre. The steles are connected with the cortex by means of many tube-like structures called trabeculae, which are modified endodermal cells with casparian strips on their lateral walls. The stems contain no pith. Unusually for the lycopods, which generally have microphylls with a single unbranched vein, the microphylls of Selaginella species contain a branched vascular trace.
|
|
The outside mold was typically protected from damage by a controlled water bath or water spray system. When the pipe was cool enough to be handled and hold its shape, the mold was stopped and the pipe removed. Pipe formed in metal molds were typically annealed after casting to eliminate any stresses in the pipe, and were then cleaned, inspected, tested, gauged (for dimensions), coated internally and/or externally, and stored for use. Standards for cast-iron pipe centrifugally cast in metal molds for water were established and published by the American Water Works Association.
|
|
Unlike a drip oiler, there is also no need to close off the oiler or remove oil wicks when the machine is stopped. Ring oilers were used for speeds up to around 1,000 rpm. Above this, the oil tended to be thrown centrifugally from the ring, rather than carried by it (although it is still currently applied on steam turbines with speeds around 3200 rpm). The bearing must also remain horizontal and stable, so although suitable for crankshaft main bearings, they could not be used on connecting rod big end bearings.
|
|
Lima benefited from increased production during World War II and a growing population, but suffered a significant economic decline at the end of the decade when industry retooled for peacetime production. In May 1941, based in the steel foundry, construction began on Lima Army Tank Plant to manufacture centrifugally cast gun tubes. In November 1942, United Motors Services took over operation of the plant to process vehicles under government contract. The plant prepared many vehicles for Europe, including the M5 light tank and the T-26 Pershing tank.
|
|
GRP had previously been used for shipbuilding, automobile and aircraft industry. However, its resistance to both corrosion and chemicals also made the material highly suitable for other applications. The Swiss, renowned for their vision and pioneering spirit, recognized its benefits and soon employed centrifugally cast pipes for conveying water - the pipes laid at that time are still in use today. Step by step, the pipes were improved, the manufacturing process was automated, the product range extended and tailor-made fittings were added to the product range during the subsequent years.www.hobas.
|
|
Cameron's research primarily focuses on stellar magnetic fields and the discovery and characterisation of extra-solar planets and cool stars. In his early career, he focused on the rotational history and dynamo-generated magnetic activity of cool stars, ultimately producing micro-arcsecond resolution maps of starspot distributions and surface magnetic fields. With Dr R. D. Robinson he co-discovered the centrifugally supported "slingshot prominence" systems in the coronae of the young, rapidly rotating solar-type star AB Doradus and other similar objects. Cameron was awarded a personal chair in 2003.
|
|
The possible presence of contaminants makes these powders unsuitable for use in critical aircraft applications. In the plasma rotating electrode process (PREP), the feedstock, such as Ti Grade 5, is in the form of a rotating bar which is arced with gas plasma. The molten metal is centrifugally flung off the bar, cools down and is collected. The powders produced are spherical; between 100 and 300 μm is size, with good packing and flow characteristics, making the powder ideal for high quality, near net shapes produced by HIP, such as aviation parts and porous coatings on hip prostheses.
|
|
The second method did not entail a metal pattern, but entailed the forming of the mold centrifugally by lining the heated flask with a measured amount of thermosetting resin and sand. Either way, the casting machine was stopped after the pipe had solidified and the flask was removed. Cast iron pipe formed using this procedure was typically oven-cooled under controlled time and temperature conditions. As with metal molds, pipe was typically annealed to eliminate any stresses in the pipe, and were then cleaned, inspected, tested, gauged (for dimensions), coated internally and/or externally, and stored for use.
|
|
The foremost information that the VRI provides on vibration energy, is how lung sounds behave and function during inspiration and expiration, which also includes individual breathing intensity (or vibration energy) graphs for each lung along the time period of 12 seconds. The distribution pattern of normal lung vibration energy for healthy individuals evolves centrally (presumably reflecting early airflow distribution in central large airways) and develops centrifugally in a simultaneous fashion for left and right lungs. Following peak inspiration, there is centripetal regression of vibration energy toward the end of inspiration. The same pattern is repeated during expiration phase accordingly.
|
|
When a liquid sludge is produced, further treatment may be required to make it suitable for final disposal. Sludges are typically thickened and/or dewatered to reduce the volumes transported off-site for disposal. Processes for reducing water content include lagooning in drying beds to produce a cake that can be applied to land or incinerated; pressing, where sludge is mechanically filtered, often through cloth screens to produce a firm cake; and centrifugation where the sludge is thickened by centrifugally separating the solid and liquid. Sludges can be disposed of by liquid injection to land or by disposal in a landfill.
|
|
The Twister supersonic separator is a compact tubular device which is used for removing water and/or hydrocarbon dewpointing of natural gas. The principle of operation is similar to the near isentropic Brayton cycle of a turboexpander. The gas is accelerated to supersonic velocities within the tube using a De Laval nozzle and inlet guide vanes spin the gas around an inner-body which creates the "ballerina effect" and centrifugally separates the water and liquids in the tube. Hydrates do not form in the Twister tube due to the very short residence time of the gas in the tube (around 2 milliseconds).
|
|
Size compared to a human The spine is superficially inserted in the skin, where it grows and moves from a deep position in the dermis where trabecular dentine forms, to a superficial location where centrifugally growing lamellar dentine forms. The number of denticles per annual cycle vary with growth rate, and are independent dermal elements formed by the dermal papilla and secondarily attached by dentine to the spine proper. The density of denticulation also varies with the growth rate of the occipital spine. The ratio of length of denticulated region to total length of the spine changes throughout ontogeny.
|
|
It was received at the northern end of the factory, whereupon the cans were weighed, milk was checked for freshness, sample cups were taken from each supplier and daily cream dockets were issued. The cans were placed upon a conveyor which tipped the milk into troughs and milk was strained into vats. The cans went to the can washer where they were cold rinsed, caustic washed, hot washed and steamed dried before being returned to the supplier for removal. The milk was centrifugally tested and pasteurised in the with the salt hole and pump house on the site providing the water for the vacuum before being bottled and then transported by conveyor to the stores.
|
|
An integrated magneto provides 50 V AC power for the CDI system and 20-30 V AC rectified and regulated to 12 V DC for chassis accessories such as lighting, and to charge a battery. It includes an integrated swingarm, which houses a centrifugally controlled Continuously variable transmission (CVT) using a rubber belt sometimes called a VDP. At the rear of the swingarm, a centrifugal clutch connects the transmission to a simple integral gear-reduction unit. There is no clutch of any kind between the CVT and the crankshaft; it is engaged via a centrifugal clutch at the rear pulley in the same fashion as Vespa Grande, Bravo and variated Ciao model, as well as Honda Camino/Hobbit scooters/mopeds.
|
|
The first units were used successfully during the Battle of Peleliu in 1944. The 20 cm naval rocket was a modification of a standard naval projectile by screwing a rocket booster to the projectile. The rocket was ignited by a percussion cap which screwed into the base of the projectile and the rocket consisted of 7 sticks of double base solid-propellant whose exhaust gasses were forced through six venturis drilled in the base of the rocket at a 25° angle which rotated the projectile in a clockwise direction imparting spin-stabilization. Type 91 trinitroanisole explosive was poured into a lacquered shell body intended to stop the formation of picrate salts and the projectile was centrifugally armed by a nose fuze.
|
|
The dorsal spines of Orthacanthus platypternus from the Craddock Bone Bed in Texas, USA, preserve a highly vascularized wall mainly composed of centrifugally growing dentine (the outer layer of the wall of the spine) in a succession of inwardly growing dentine layers that line the pulp cavity. These dentine layers are likely deposited periodically in accordance with seasonal variations in water temperature and food availability. More specifically, the periodic nature of the dentine layer deposits could be due to variation in calcium phosphate deposition following the changes in water temperature. Spines of individuals with 1-2 dentine layers are likely juveniles and result in the smallest sizes, whereas individuals showing at least 3-4 dentine layers result in two separate size classes.
|
|
The straight blast is a martial arts technique popularized by Bruce Lee and associated with Wing Chun Kung Fu and Jeet Kune Do. It is one of Bruce Lee's most famous signature moves, and an international federation of gyms have been named after the technique. The technique operates on the principle of using a sustained offense as a means of forcing an opponent to move on the defensive. The move consists of putting both fists perpendicularly above one another and moving them in a circular motion (starting forward and downward) in a tight formation with fists kept facing forward bent at the wrist outward and clenched vertically, compounded with running toward an opponent. This is intended to throw off the opponent while effectively dealing a barrage of centrifugally forced punches toward the center of the opponent's mass.
|
|