With the buttstock down, the Army also aims for it to be 35 inches long or less.
|
|
The current rifle prototype has a much smaller battery pack mounted in the collapsible buttstock, he said.
|
|
The GAU 5A's pistol grip is designed to fold back against the collapsible buttstock to save space when stowed.
|
|
Second, the photo indicates that the buttstock is directly attached to the receiver and lacks the metal extension that was only a feature of the Type 2 rifle.
|
|
It has a different buttstock and barrel twist than previous CSASS models, comes in just under 10 pounds and uses a Sig Sauer Tango 6 variable 1x6 power scope.Spc.
|
|
Shooting a small, high-velocity round, and with a buffer spring in the stock designed to absorb shock, the recoil is so light that you can place the buttstock on your forehead and shoot without getting a headache.
|
|
One person decked out in tactical gear carried an underbarrel M203 grenade-style launcher attached to a modified assault weapon, which appeared to include a collapsible buttstock for greater firearm control, a laser mount for accuracy, and a holographic sight.
|
|
But this year, the governor went along with Democrats in the state legislature, who have long sought to restrict assault rifles, defined by California law as any centerfire, semiautomatic rifle that is fed by a detachable magazine, and also has any one of several other physical features, including a pistol grip, a collapsible buttstock, or a flash suppressor.
|
|
The lower receiver incorporates the magazine well, the pistol grip, the buttstock, the buffer and the buffer spring. The lower receiver also contains the trigger, disconnector, hammer and fire selector (collectively known as the fire control group). Full- sized rifles use a fixed buttstock, while carbines generally use an adjustable telescoping buttstock. The early commercial SP-1 AR-15s used a pair of .
|
|
The barrel cover model is also designed to be lightweight but rigid. For the buttstock, D7 adopts telescopic buttstock type of polymer material that can be adjusted. Polymer material is also used in the magazine, which contains 30 bullets.
|
|
To compensate, the buttstock was designed in a way that it bent to the right, leading to the Chinese nickname for the weapon "bent buttstock" (). Reloading the weapon during an assault charge proved impossible due to the clip feeding system.
|
|
The M200 Intervention has a collapsible and retractable buttstock that is adjustable for length of pull for ease storage and transportation. The buttstock also contains an integral rear monopod, which is hinged, and can be folded up when not in use.
|
|
M1A1 Carbine. Paratrooper model with folding buttstock and late issue adjustable sight and bayonet lug.
|
|
The Chiappa M6 is marketed to "outdoorsmen, ranchers, pilots or anyone who needs a portable, rugged and reliable rifle/shotgun combination." It has a skeletonized metal buttstock that surrounds a polypropylene foam insert. The buttstock also holds two shotgun shells, five .22 rimfire cartridges and a cleaning kit.
|
|
The CETME R was a derivative of the CETME B without buttstock, intended to be used aboard armored vehicles.
|
|
CAR-15 Submachine Gun In late 1959, Colt introduced a Tanker Model of the AR-15. It was the first AR-15 made with a retractable buttstock, with its overall length being only with the buttstock retracted. The retractable buttstock resembled a shortened version of the fixed buttstock, but a two-position latch recessed in the back allowed it to be extended and locked into position, increasing the length of pull by . The barrel is too short to mount a bayonet, so the SMG had no bayonet lug. In 1965, Colt introduces the new Model 607 CAR-15 Submachine Gun (SMG), which is an improved version of the Colt Armalite AR-15 Tanker Model with some modifications from the M16.
|
|
Model 500s were also previously sold as law enforcement combos in 12 gauge with both and barrels, birch buttstock, pistol grip and sling.
|
|
There is also a variant with quad-rail handguards and telescopic CAA CBS-style buttstock and sometimes with extended quad-rail and cut carry handle.
|
|
Additional proof marks and property markings are found on the receiver and barrel. There is a factory cartouche on the right side of the buttstock.
|
|
All post ban rifle stocks on the NHM-91 are of a one-piece thumbhole design with integral pistol grip, and are thicker and longer than the standard AKM/AK-47 buttstock. Made by E.C. Bishop or BoydBoyd's Gun Stocks and constructed from birch wood or hackberry, the NHM-91 buttstock lacks a separate pistol grip, though the rifle may be retrofitted with a separate buttstock by simply cutting off the lower portion of the stock and grip with a band saw, then fitting a new pistol grip. Like its RPK counterpart, the NHM-91 does not come equipped from the factory with a bayonet lug.
|
|
Modern firearms may be equipped with a telescoping stock or removable spacers to adjust the length of pull. Gunsmiths may adjust the length of pull of custom-built firearms or older firearms by cutting off a portion of the buttstock or adding a recoil pad to the buttstock. Some sources suggest a shooter's optimum length of pull will allow the butt of the firearm to exactly reach the inside of the elbow when the hand of that arm grips the unloaded firearm with a finger on the trigger. Other sources suggest a more appropriate determination may be made using a non-firing "try-gun" resembling a firearm with an adjustable buttstock.
|
|
Russian marine on exercise with the AKS-74 variant with plum colored polymer furniture. The AK-74 was equipped with a new buttstock, handguard (which retained the AKM-type finger swells) and gas cylinder. The stock has a shoulder pad different from that on the AKM, which is rubber and serrated for improved seating against the shooter. In addition, there are lightening cuts on each side of the buttstock.
|
|
The barrel cover (hand guard) is a rail integration system (RIS) with several open cavities, making the heat dissipation process on the barrel faster when in full automatic firing mode. The barrel cover model is also designed to be lightweight but rigid. For the buttstock, D5 adopts telescopic buttstock type of polymer material that can be adjusted. Polymer material is also used in the magazine, which contains 30 rounds.
|
|
Each variation based entirely on the nosecap size and the spacing of the nosecap screws. They have a unique storage compartment in the buttstock for a cleaning rod.
|
|
The buttstock is collapsible on the M4 Model (designated 11707) and on the M1014.While the M1014 was first manufactured before the Federal Assault Weapons Ban expired, it fell outside the ban due to being produced under military contract, and the relevant Technical Manual explicitly describes the buttstock as being telescoping; the M11707 was first manufactured following the expiration of the Assault Weapons Ban and its provisions. Collapsing the buttstock shortens the weapon by almost 8 inches, allowing easier storage and transportation; furthermore, it permits better maneuverability around tight corners and over obstacles. The M4 is also available with both pistol grip and semi-pistol grip fixed stocks, with these also being available for the M1014.
|
|
KNP Combat police officers armed with Daewoo K2s. Note the folded buttstock. Six different prototypes were made during the XB development. Of the 6 designs, the XB6 was selected.
|
|
The AK-47 was originally equipped with a buttstock, handguard and an upper heat guard made from solid wood. With the introduction of the Type 3 receiver the buttstock, lower handguard and upper heatguard were manufactured from birch plywood laminates. Such engineered woods are stronger and resist warping better than the conventional one-piece patterns, do not require lengthy maturing, and are cheaper. The wooden furniture was finished with the Russian amber shellac finishing process.
|
|
The "in-line" design of the barrel- receiver group also directs recoil rearwards in a straight line, minimizing muzzle flip. A sturdy adjustable bipod is fitted to the front of the fore-end. The rifle features a fully adjustable buttstock and cheek riser. A folding/adjustable monopod located behind the magazine on the inside of the buttstock can be used to support the rifle in firing position during extended periods of deployment.
|
|
The Benelli Nova is a pump action shotgun, popular for hunting and self- defense. Its most innovative and distinguishing feature is a one-piece receiver and buttstock, made of steel-reinforced polymer.
|
|
30 Carbine. All succeeding prototypes (Modèle 1949, Modèle II, and the definitive Modèle 1950) were chambered in .30 Carbine. All versions of the design included a combined bipod/handguard and a folding buttstock.
|
|
But in fact, the bolt itself was connected to the fore-end and the action and barrel to the buttstock. The parts of the two-piece, wood stock met just under the receiver.
|
|
SPRs have been seen with M16A1 or M16A2 fixed buttstocks, telescoping M4 buttstocks, and the Crane Enhanced telescoping buttstock. The rifles are compatible with any type of stock system developed for the M16.
|
|
A metal sling mount was fitted to the left side of the wooden buttstock. Ammunition was manufactured in Australia or obtained from adjacent American troops. It was later replaced by the Owen Machine Carbine.
|
|
The materials used for making this weapon include stamped, sheet metal and molded plastic. The specifications for the buttstock do not exist. The Agram 2000 measures at about 13.8 inches without the silencer on.
|
|
38 ACP with a wooden buttstock. Optional accessories include a conical flash hider and a special barrel featuring an integrated sound suppressor that the operator may swap to rather than the standard barrel pattern.
|
|
According to ST Kinetics Senior Engineer Felix Tsai, the STK 40 GL can be configured to be used with a buttstock or attached underneath assault rifles like the SAR-21, the M16 and HK series.
|
|
Like the DSR-1, this rifle retains its bullpup configuration, allowing a longer barrel while retaining a shorter overall length (OAL), which is an important consideration for large caliber rounds such as .50 BMG, and focuses the weapon's balance towards the buttstock, compensating for the muzzle's heavy attachments standard on the DSR-50. The DSR-50 also retains some of the DSR-1's features, such as a top mounted bipod, "butt spike" monopod, free-floating barrel, fully adjustable cheekrest and buttstock, and forward magazine holder.
|
|
Weapon is fitted with side-folding metallic buttstock and a polymer furniture (pistol grip and short forend). Iron sights consist of the L-shaped flip-up rear (marked for 50 and 100 meters) and protected front sight.
|
|
The lower receiver along with pistol grip and trigger guard is made from polymer, the upper receiver is made from steel. The simple buttstock is made from steel wire and folds to the left side of gun.
|
|
The standard buttstock found on the ACE is a six-position telescopic stock that can be fitted with an optional cheek-piece to improve the sighting of the weapon when using an optical sight. An optional right folding version of the standard buttstock is also available. The forearm consists of MIL-STD-1913 Picatinny rails on the bottom and both sides for mounting accessories such as aiming optics. The side forearm rails have central grooves to provide routing channels for electric wiring used by pressure switch activated accessories.
|
|
The base of the ergonomic injection-moulded polyurethane forestock is made of aluminium and encompasses the bedding block with the bedding block serving as a point of attachment for a bipod. The polyurethane buttstock with its pistol grip and integrated aluminium skeleton to add strength, is designed for right- and left-handed shooters. The rear of the buttstock possesses a series of spacer and angle plates to regulate the length of pull and curvature adjustments that can be tailored for the individual shooter. The buttplate is adjustable for both height and pitch.
|
|
The sights are folded for more convenient carry and storage, with a ladder-type rear sight. The buttstock is fitted with a rubber recoil pad, and when it is not in use, it is telescoped into the frame.
|
|
Incidentally, the buttstock is the one part of the M96 that is interchangeable with the Stoner 63. The M96 has adjustable military-type sights (rear aperture and front protected post) and does not have a standard scope mount or Picatinny rail.
|
|
The wire buttstock rod can be reshaped to allow use of 75-round RPK drum magazines even with the stock folded, and the weapon's internal mechanism can be tuned with aftermarket recoil dampers for smoother behaviour in full-auto mode.
|
|
This system reduces the number of parts, and simplifies manufacturing as well as assembly/disassembly. This design made its way into the IMI Galil. A port in the shoulder pad allows storing items (e.g. the cleaning kit) in the tubular buttstock.
|
|
A latch in the buttstock secures to the front sight housing, and the gun can be locked with a key in the folded position for added safety. The gun cannot be fired when folded. SUB-2000 in its folded configuration.
|
|
The rifle is hammer-fired with a single-stage trigger in most models. Some models include a two-stage trigger from the factory. The SIGM400 has a telescoping skeletonized buttstock. The ACE-style stock moves forward and rearward in six positions.
|
|
375 CheyTac cartridge, a detachable muzzle brake, a fully adjustable folding buttstock that has an adjustable cheek weld, a recoil pad and an optional monopod, an adjustable pistol grip, an adjustable match trigger and flush cups for weapon sling mounting.
|
|
To maintain its AOW status, it must not have a buttstock (making it a SBS) or a rifled slug barrel (making it a Destructive Device (DD) if the bore is over 0.5"). Firearms of this type are typically over 100 years old. These weapons produced with a barrel length under 18" are not considered sawed-off shotguns because they were not produced with a shoulder buttstock. Weapons with these specifications fall under the category of smooth bore handguns produced in heavy rifle calibers and 12/20 gauge shotgun calibers, contrary to illegal sawn-off shotguns and are not considered destructive devices.
|
|
As of 2007, the weapon is available in a wide array of variants; available barrel lengths are 12.5” and 16 inches, with three different stocks available: standard hunting rifle stock, sporting stock with fixed buttstock and pistol grip, and tactical stock with pistol grip and 5-position telescoping buttstock. The 12.5 inch barrel is threaded and features a removable muzzle brake. The Rx4 has a MIL-STD-1913 “Picatinny” top rail, with side and bottom and fore-end rails optional. The gas port is located just forward of the chamber where the gases are hotter and cleaner.
|
|
Supplied with the RPK are: spare magazines, a cleaning rod, cleaning kit (stored in a hollowed compartment in the buttstock), a sling, oil bottle, and magazine pouches (a single-pocket pouch for a drum magazine or a 4-pocket pouch for box magazines).
|
|
The wooden stock is mounted in a pivoting hull, which contains a catch that secures the buttstock in the extended position. The rear sling loop was moved from the left side of the stock body to the right side of the stock frame.
|
|
The PM-84/PM-84P also features ambidextrous charging handles on both sides (influenced by the vz.61 Škorpion). A two-bar retractable buttstock tucks right into the side of the weapon. The magazine release is in the heel of the pistol grip.
|
|
45 Colt in a variety of finishes. The Henry US Survival AR-7 is an updated version of the U.S. Air Force AR-7, a take-down .22 that is ideal for all outdoorsmen. All of the rifles components fit into the buttstock.
|
|
The scope rail is mil-standard with boss to engage cross-slot on the receiver. Stock comes in 3 sections, extruded forend, machine grip frame with vertical grip, forged and machined removable buttstock. The buttplate is vertically adjustable, specifically built for heavy calibers.
|
|
A rubber pad affixed to the buttstock absorbs some recoil. The front sight is a fixed blade. The rear sight on the M79 is a folding ladder–style leaf sight. When folded, the leaf sight acts as a fixed sight at close range.
|
|
Spanish Civil War Mosins can be readily identified by the wire sling hangers inserted in the slots in the forearm and buttstock meant to take the Russian "dog collars" for Russian-style slings, so the rifles could accept Western European–style rifle slings.
|
|
There were a total of 125 TC's. Initially 25 were made in response to requests for an SR9T with the PSG1 buttstock. H&K; did not have these in their catalog. The next year, HK added the SR9TC to their catalog and imported 100 guns.
|
|
A folding steel buttstock can be attached at the heel of the grip.McNab, Chris (2004). The Great Book of Guns, p. 145. The 93R is considered difficult to control when being repeatedly fired in burst mode because of the 1,100-round-per-minute firing rate.
|
|
The barrel assembly weighs . To reduce the overall length of the weapon for transport, the butt stock can be folded to the left side of the receiver. With the buttstock folded the MG4 remains fully operable. A field cleaning kit is housed within the stock.
|
|
Although most falling-blocks were single-shot actions, some early repeaters used this design, notably the Norwegian Krag–Petersson and the U. S. Spencer rifle. The former loaded from a Henry-style underbarrel magazine; the latter fed from a tubular magazine in the buttstock.
|
|
Early petronel dates back to the end of the 14th century, with rudely fashioned buttstock. Generally the touch hole is on the right side, and fired by separate match.Demmin (1894). pp. 68. Sometimes they had small hinged plate cover to protect the priming from damp.
|
|
Introduced in 1995 and produced until 2002, the Ruger Red Label Woodside used select Circassian walnut for its forearm and buttstock, which extended into the action on two side panels. Ruger also offered an all-weather version of the Red Label with stainless steel barrels and a black, synthetic forearm and buttstock. Hand Engraving at extra cost was offered by several master engravers including John J. Adams, John Adams II, Bryson Gwinnell, Carmine Lombardy, Alvin White, Andrew Bourdin, and Jon Ashford of Ruger. In 1999 Ruger's 50th Anniversary special CNC cut engraved with 24 kt Gold Birds 28 gauge Grouse, 20 gauge Pheasant, 12 gauge Duck.
|
|
Only the Model 653 M16A1 carbine, with retractable buttstock and forward assist would be purchased in significant numbers by the U.S. military. The Malaysian Armed Forces and the Armed Forces of the Philippines, purchased Model 653s in small numbers for special operations forces or security forces.
|
|
Mk 11 Mod 1/2 – Thefirearmblog.com, September 29, 2009 The new SR-25 Enhanced Match (E.M.) Carbine is very similar to the KAC M110 Semi-Automatic Sniper System, though the M110 utilizes the newer URX Rail system, a length-adjustable fixed buttstock, and an integrated flash suppressor.
|
|
Diemaco changed the trapdoor in the buttstock to make it easier to access and a spacer of is available to adjust stock length to user preference. The most easily noticeable external difference between American M16A2s and Diemaco C7s is the retention of the A1 style rear sights.
|
|
The 535 is also available in a tactical model with ghost ring sights and a collapsible pistol grip buttstock. Although Model 500 barrels can be used with Model 535 receivers, magazine tubes from the Model 500 must also be used because of the magazine tube length difference.
|
|
On March 28, 2012, Ruger introduced the 10/22 Takedown model. This model disassembles into barrel and action/buttstock components easily. It is shipped in a backpack style case that has room for the rifle, ammunition, and accessories. The MSRP is higher than the basic carbine models.
|
|
The FARA-83 was mostly inspired by the Israeli Galil. Features include a folding buttstock and tritium sights for aiming in low light conditions; the rifle uses a proprietary 30-round Beretta AR70 magazine (early issue), and has a trigger group that enables semi-automatic and fully automatic fire.
|
|
Philippine arms company FERFRANS has created their version of the Mk 14 Mod 0 called the FERFRANS SOPMOD M14/M1A Enhanced Battle Rifle, which uses a Sage International M14/M1A EBR Tactical Stock System aluminum chassis, an M4 buttstock, and a GRSC M4-62 General Purpose Combat Recticle.
|
|
The upgraded GPMG will be equipped with a new folding and telescopic buttstock with a cheekpiece and additional grip/pod, the integrated Picatinny rail with iron sight and 3-rail forehand attached to the gas tube, new grip, new cocking handle new safety switch selector, a new 440-mm barrel (as an option) plus some additional internal changes. The Polish Army is interested in this machine gun fed from the 100-round soft ammo bag instead of a steel box. Because of external similarity to the Russian PKM GPMG chambered to the 7.62×54mmR some elements like a buttstock, a grip or a forehand with rails will able to be used with the Kalashnikov design.
|
|
300 WinMag, .338LM. ;R93 Duo Mod. Hamed: Double barreled side by side rifle made to order for Hamed bin Zayed Al Nahyan. ;R93 Handgun Hunting System: Handgun Hunter Magazine - The Blaser R93 Handgun Hunting System An ultra short R93 with a 36 cm barrel and only a pistol grip (no buttstock).
|
|
A variant of the MG4 configured for use as a vehicle or coaxial machine gun. It lacks a buttstock, rear sight, cartridge case deflector, handguard, and bipod mount. It can be fitted with a remote firing device and safety/fire selector lever. It can also be fitted for dismounted use.
|
|
The Little Badger Survival Rifle has a barrel length of 16.5 inches and measures 31 inches. It is a single shot break-action rifle and when folded, measures around 17.5 inches. The Little Badger features a wire buttstock and has a 12 round ammunition holder. Unloaded, it weighs approximately 2.9 pounds.
|
|
The new Model 505 Youth shotgun, introduced in 2005, is similar to the Bantam but scaled down further. The 505 has a LOP buttstock (compared to a standard model's , or a Bantam's ), a barrel, and a four-shot magazine tube. The 505 is available in 20 gauge and .410 bore.
|
|
The Beretta ARX160 A2, also referred to as the ARX160 SF (Special Forces) is similar to the ARX160 but features a shorter buttstock, an extended Picatinny rail on the bottom of its handguard and uses a 12-inch barrel. It was developed for the Italian special forces and was later adopted by them.
|
|
The action is glass bedded into the stock with aluminum pillars, while the barrel is allowed to "float" (it is attached only to the action), ensuring it is stress free during operation. The stock has adjustable length-of-pull (through a buttstock spacer system) and a Marine manufactured adjustable saddle-type cheekpiece.
|
|
The SIG MCX RATTLER is a short- barreled rifle variant intended to serve as a personal defense weapon, featuring a barrel, and comes with a Picatinny rail tail interface for attaching either a compact buttstock or a folding PCB (pistol contour brace). It is available in 5.56×45mm NATO and .300 AAC Blackout.
|
|
The Robar RC-50 is a bolt-action anti-materiel precision rifle chambered in .50 BMG (12.7 × 99 mm NATO) manufactured by the United States Robar Companies, Inc in Phoenix, Arizona. The RC-50 is found in two variants—the original RC-50 (RC-50 Standard) and the side-folding buttstock RC-50F.
|
|
Alternatively, cartridges can be singly loaded directly into the chamber. The TRG M10 has a side-folding and fully adjustable buttstock, featuring an aluminium middle chassis frame, side-folding buttstock, and a fore-end with the M-LOK rail interface system that allows for direct accessory attachment onto "negative space" (hollow slot) mounting points, ambidextrous controls, a manual safety that is located inside the trigger guard which is in front of the trigger, and uniquely designed tactical indicators which helps identify different modular components for different calibres, where every calibre-depending component is specially marked so users can recognise the calibre of each part visually or by touch. For example, for the .308 Winchester barrel and bolt are marked with single annual grove, whereas for the .
|
|
A three-point sling is used to help carry the MSMC via shoulders. The first prototypes have a large trigger guard, but later versions had this removed and instead, had traditional trigger guards instead when they showcased in exhibitions in 2013. In 2014, the MSMC's buttstock length changed from 558 mm to 500 mm.
|
|
On the afternoon of April 26, they caught up with the band at Eagle's Nest Crossing just before the Pecos River. They surprised the band and recovered the horses. The band soon recovered and set out after the scouts. There was a pitched battle in which Sergeant Ward had his carbine's buttstock shattered by bullets.
|
|
Most single barrel and double barrel shotguns readily break down into separate buttstock, barrel and forestock and are often transported cased as takedown guns. Among repeating shotguns, the Winchester Model 97 and Model 12 shotguns were factory made as takedown guns. Savage also makes a series of takedown over/under rifle/shotgun combination guns.
|
|
To prevent accidental engagement and firing, there is an ambidextrous safety selector at the top of pistol grip. RGP-40 is equipped with a Picatinny rail on top of the magazine and three rails surrounding the barrel. It is also equipped with a telescopic buttstock that can be rotated vertically for better weapon handling.
|
|
In 2012 the TAC-50 A1 variant was introduced. The TAC-50 A1 has a new take-down fiberglass stock with a forend that is longer than the TAC-50 stock. This moves the balance point for the bipod forward. The stock includes an integral cheekpiece and a monopod on the buttstock with an option for vertical adjustment.
|
|
22 LR, subsequent handgun developments by Thompson/Center led to a wider range of interchangeable barrels for use with many more cartridges. Opening and closing the break-open action is accomplished by squeezing the outside bottom of the trigger guard toward the grip/buttstock, at which time the action opens, and an extractor manually extracts the cartridge.
|
|
Like the bunker version, the tank version had a pistol grip and no buttstock, and it could be quickly removed from the tank and fitted with a standard barrel shroud for infantry use if needed. The tank version remained in the Finnish Army's inventory through the 1980s, despite the tank it was designed for being retired in 1959.
|
|
The AW50F is a folding stock variant which fires the multi-purpose Raufoss Mk 211 cartridge and other rounds. Most of the rifles are made in the United Kingdom; the barrels are sourced from three different manufacturers: Lothar Walther, Border and Maddco. The weapon's stock folds for portability. It has a fully adjustable bipod and buttstock heel rest.
|
|
The buttstock comb was extended further forward on the wrist to strengthen the wrist's weak spot. The wrist itself was also thickened. Prior to 1877, the breechblock had a high arch machined out of it, making it lighter. The Model 1877 no longer had the arch machined out of it, though the reason for this modification is not clear.
|
|
In the late 1940s, Elmer and Loraine left the ranch and moved into the town of Salmon. The ranch is still owned by the Keith family. During World War II, Keith served as an inspector at the Ogden, Utah, Arsenal. The rifles that he inspected were cartouche stamped with the initials "OGEK" in a rectangular box, on the buttstock.
|
|
The Mk 1L also features a sliding buttstock. Loading 40 mm grenades into USMC M32 launcher. In 2006 the Milkor 37/38mm Multiple Anti-Riot (MAR) replaced the 40mm less-lethal Yima. The MAR is largely identical to other MGL models, but is adapted to fire standard 37/38mm less-lethal riot control rounds available today.
|
|
A completed lower receiver is visually distinguished by the trigger guard ahead of the detachable pistol grip, and behind the magazine well capable of holding detachable magazines. The lower receiver holds the trigger assembly including the hammer, and is the attachment point for the buttstock. The lower receiver is attached to the upper receiver by two removable pins.
|
|
The Chiappa M6 Survival Gun is an over and under combination gun that comes in four versions; with a 12 gauge or 20 gauge shotgun barrel over a .22 Long Rifle or .22 Magnum barrel. It has a similar appearance to the original M6 Aircrew Survival Weapon, with a unique skeletonized metal buttstock surrounding a polypropylene foam insert.
|
|
The HS .50 M1 is an evolution of the HS .50. The biggest differences are: it is magazine fed from a five-round magazine feeding horizontally left from the receiver, has a longer top Picatinny rail and more Picatinny rails on the side, an adjustable cheekpiece, a newly designed fixable bipod, and a monopod at the buttstock.
|
|
The Ak 5B is the designated marksman version of the Ak 5. Modifications include fittings for a 4×25.5 SUSAT L9A1 tritium sight, a cheek pad on the buttstock, and removal of the iron sights. This weapon was typically carried by squad leaders. This version weighs 4.8 kg (without magazine) and 5.4 kg (with full magazine).
|
|
The decision to use the original Model 1894 action, a design originally designed to accommodate pistol-length cartridges such as the .38-40 and .44-40, proved a complete success. In keeping with its predecessor, the New Model 1894 was given a straight grip buttstock instead of the pistol- grip style version fitted to the Model 336.
|
|
H&K; Fabarm FP6 Entry - features a 14" barrel and is subject to regulation under the National Firearms Act in the U.S. The entry shotgun or breaching shotgun is a role that can be filled by a standard riot shotgun, or one further modified for these purposes. They may have an extremely short barrel (14" or less) and often only a pistol grip rather than a buttstock, or a folding or collapsing buttstock if it is provided with one. In addition, the barrel often has a muzzle brake, used to disperse hot gases that might otherwise be deflected toward the shooter. This type of shotgun is designed to fire special breaching rounds which are designed to disable or destroy door latches while limiting overpenetration of the projectiles used beyond the door.
|
|
The bewitched gun : the introduction of the firearm in the Far East by the Portuguese, by Rainer Daehnhardt 1994. This resulted in Indo-Portuguese tradition of matchlocks. Indian craftsmen modified the design by introducing a very short, almost pistol-like buttstock held against the cheek, not the shoulder, when aiming. They also reduced the caliber and made the gun lighter and more balanced.
|
|
The TAC-50 A1-R2 variant was introduced in 2012 alongside the TAC-50 A1 variant. The A1-R2 variant is basically a TAC-50 A1 rifle system with a hydraulic recoil mitigation system (a proprietary hydraulic piston in the buttstock) added to reduce the considerable amount of free recoil the .50 BMG chambering generates, and hence increase user comfort.
|
|
Another Hungarian AKM variant was used as Hungary's standard service rifle before being replaced by the AK-63. It is a standard-length AKM variant, with a standard buttstock and full-length barrel. The front sight is in the standard location. However, the front and rear pistol grips and sheet metal handguard are similar to those of the AMD-65.
|
|
The JGL Preetz Automat Model 65 was manufactured in West Germany. The receiver is made of zamac, a zinc-aluminum alloy. Like the AR-7, the barrel is retained by a hand tightened nut and is removable. Unlike the AR-7, it has a flat sided receiver and it was not intended to disassemble to pack into its own buttstock.
|
|
It features a milled receiver, a chrome lined hammer-forged barrel, a slanted 45 degree gas block, a threaded barrel, a muzzle nut, a cleaning rod and a bayonet lug. The furniture is made from blond wood and the buttstock is of Warsaw pact length. The rifle is supplied with one 30-round magazine, a sling, an oil bottle and cleaning kit.
|
|
The 1928 Thompson would be the last small arm adopted by the U.S. Army that used a year designation in the official nomenclature. With the start of World War II, major contracts from several countries saved the manufacturer from bankruptcy. A notable variant of the Model 1928 with an aluminum receiver and tenite grip, buttstock, and forend, was made by Savage.
|
|
A few prototypes were fitted with bayonet adapters, but none are known to have been issued. A few Stevens Model 69R shotguns also saw service during the Vietnam War. The Model 77E gave satisfactory service, but proved less durable than the Ithaca Model 37. Breakage at the point of attachment of the buttstock to the receiver was the most common complaint.
|
|
After adoption by the French military, the FAMAS F1 replaced both the aging MAS 49/56 rifle and MAT-49 submachine gun. Approximately 400,000 FAMAS F1 assault rifles were produced by MAS. While a capable rifle, the F1 had numerous problems to overcome. For instance, many plastic pieces on the rifle easily broke, including critical parts like the cheek riser on the buttstock.
|
|
The SIG MCX is a family of firearms designed and manufactured by SIG Sauer, produced in both selective fire and semi-automatic only models, and features a short-stroke gas piston system, which is inherited from the earlier SIG MPX submachine gun. The MCX is available in rifle, carbine, short-barreled rifle, and pistol (generally considered as a compact carbine without buttstock) configurations.
|
|
The non-reciprocating charging handle can be changed to operate from either side of the rifle. All other primary controls are ambidextrous. It has an interchangeable barrel system and a folding adjustable buttstock with a three position cheek riser and a paddle-style magazine release. The monolithic upper receiver features an integrated full length Picatinny rail, and is made of aluminium alloy.
|
|
American firearm manufacturer DS Arms makes a semi-auto variant for civil market and a full-auto variant for export, both in the original design and also in a modernized version called RPD Carbine. The RPD Carbine has a fluted 17.5-inch barrel, modern front sight, alloy handguard with rails, M249-type pistol grip and M4 recoil spring tube and buttstock.
|
|
Infantry versions of the Darne machine gun were normally fitted with a pistol grip and rifle-type trigger below receiver, and a wooden buttstock. Alternate variants featured skeletonized pistol grip made of metal and a top-folding shoulder stock, also made of metal. A folding bipod or a compact lightweight tripod was used to mount the Darne machine guns in ground roles.
|
|
Whitman then packed into his footlocker a Remington 700 6-mm bolt-action hunting rifle, a .35-caliber pump rifle, the M1 carbine, a 9-mm Luger pistol, a Galesi-Brescia .25-caliber pistol, a Smith & Wesson M19 .357 Magnum revolver, the shotgun, of which he had sawn off the barrel and buttstock, as well as more than 700 rounds of ammunition.
|
|
The standard stock found on the Galil is a rough-copy of the FN-FAL Paratrooper stock, with modifications for simpler production and ease of use. Unlike the FAL folding stock, the Galil uses no locking button and is operated entirely by a pin and spring pivoting mechanism; to fold the stock, the "L" bracket on the stock portion is pressed down to where the spring is fully compressed and the entire stock is allowed to pivot on the buttstock hinge. The same operation is done for unfolding to the stock to the open-position. The bracket and knuckle assemblies feature camming surfaces that allow the emergency unfolding of the stock by simply pulling the buttstock rearwards, however this should generally be avoided as it will wear down the mechanism rapidly over time, and lead to the stock wobbling in both positions.
|
|
He tried to force his way through the barbed wire on the perimeter of the camp, but he got stuck for half an hour. Upon being discovered, Weaver was severely beaten, with one guard breaking the buttstock of his rifle over him. Soon afterwards, he was moved to Camp 49 in Fontanellato. At Camp 49, Weaver attempted to escape a third time, crawling through a sewer.
|
|
Starting in the 1513, the tradition of German-Bohemian gun making were merged with Turkish gun making traditions.The bewitched gun : the introduction of the firearm in the Far East by the Portuguese, by Rainer Daehnhardt 1994. This resulted in Indo-Portuguese tradition of matchlocks. Indian craftsmen modified the design by introducing a very short, almost pistol-like buttstock held against the cheek, not the shoulder, when aiming.
|
|
The wood stock has a two piece design with a separate forend and buttstock, eliminating the need for bedding the action. The two piece design resembles that of the SIG Sauer 202 stock, but the two designs are not compatible. Different models of the 205 were available with wooden stocks of walnut, beechwood or laminated beechwood. An aluminium chassis stock was also available on some models.
|
|
Vietnamese people also had a smaller piece of bamboo to put over the barrel, to prevent the gun from accumulating dust when it was placed on a weapon rack. The Vietnamese used such arquebus to harass a Spanish armada off shore in the late 16th century with some success.Charney (2004). p. 53. This gun is similar in form to an istinggar, but has longer buttstock.
|
|
Short barreled Afghan jezail from the early to mid 1800s Although petronels had fallen out of use in Europe by 1700, similar guns were made in the Middle East until the late 19th century. Afghan horsemen used a gun that was mid-way between an oversized pistol or a miniature carbine, with a curved buttstock designed to keep the weapon close to the rider's chest.
|
|
The SU-16D model is a short-barreled version which makes the weapon NFA-regulated as short barreled rifles, subject to ownership restrictions and transfer taxes. Owing to the short barrel, the D does not include the folding bipod, but otherwise contains the same features as the C model, including the folding buttstock. The D models also include a second bottom-mounted Picatinny rail.
|
|
German soldiers with the G36 at the Tag der Bundeswehr 2019 event. The G36 is a selective-fire 5.56 mm assault rifle, firing from a closed rotary bolt. The G36 has a conventional layout and a modular component design. Common to all variants of the G36 family are: the receiver and buttstock assembly, bolt carrier group with bolt and the return mechanism and guide rod.
|
|
The Marine Corps is pursuing caseless ammunition, which is less developed and will take several more years to refine.Caseless ammo could cut 25 lbs. from gear – Militarytimes, May 21, 2012 A compact version is also being developed with a 4-inch shorter barrel and folding, telescoping buttstock. The 5.56 mm LSAT machine gun has been renamed the Cased Telescoped Light Machine Gun (CT LMG).
|
|
However, the bolt handle can be manually worked to hold the bolt back. FNC magazines will function in AR-15/M16-type rifles but the follower will not hold the bolt open on the last round unless they have been replaced by an M16-type follower. The plastic-coated, lightweight alloy skeleton stock folds to the right side of the receiver. A fixed synthetic (polyamide) buttstock is also available.
|
|
The M26-MASS (Modular Accessory Shotgun System) is a shotgun configured as an underbarrel ancillary weapon attachment mounted onto the handguard of a service rifle, usually the M16/M4 family of United States military, essentially making the host weapon a combination gun. It can also be operated as a stand-alone shotgun by attachment to a pistol grip/collapsible buttstock module. Rollout commenced in 2013, replacing the M500 shotguns in service.
|
|
The Marine Corps relies on fire discipline among its machine gunners to not set it to the largest port unless required. The M240B is being tested with a new adjustable buttstock that may replace the current stock of the M240B. The lighter M240L has started to replace the M240B in US Army service. The Marine Corps is observing the progress of the M240L, but feels it is too expensive for adoption.
|
|
Her first gun, given to her by her father, was an AR-7, a small .22 LR rifle that can be disassembled and the components stored inside the buttstock; she uses this from time to time. Other guns Rally owns and cherishes are a 1960 Colt .25 pocket model, a Beretta 84F, a Walther P38, a Parabellum P'08 (Luger), a Colt Lawman Mk.3 and a Browning Hi-Power.
|
|
Mendes was then executed by Lamarca with several blows to the head with the buttstock of a rifle.GASPARI, Elio - A Ditadura Escancarada, p. 196 e 197. In the same year, Lamarca commanded the kidnap of the Swiss Ambassador Giovanni Enrico Bucher, with the purpose of switching him for political prisoners in Rio de Janeiro; in this kidnapping, the Federal Police Agent Hélio Carvalho de Araújo was shot to death by Lamarca.
|
|
The recoil reducer is an option and must be purchased separately from a Benelli dealer or any of the more common shotgun web sites, or incorporated in the original sale/order (the recoil reducer is standard on all Benelli Supernova.) The recoil reducer consists of two elements; the apparatus that connects to the stock via the buttstock compartment, and the mercury element that is inserted into the recoil apparatus.
|
|
The new "experimental" assault rifle is said to weigh 3,350 grams and has a barrel length of 415 millimeters and a 178mm twist rate. The rifle is based on the AK-12 platform, featuring the same design and ergonomics. It features a lightweight telescopic-type buttstock, a new sight and a slotted flash suppressor which allows for the quick installation of a silencer. The weapon takes 5.56mm NATO cartridges.
|
|
A new 265-grain bullet greatly improved the utility of the Model 444 as a hunting rifle, and other bullet weights have since been introduced. In 1971, Model 444's barrel length was reduced to 22 inches, and the rifle's buttstock was changed to a full pistol-grip design. Later production rifles received a change in barrel twist to 1 in 20 inches to stabilize longer and heavier bullets.
|
|
The park service sent the gun to the Firearms Museum at the Buffalo Bill Center of the West in Cody, Wyoming for analysis and conservation. A team of researchers took the firearm to a local hospital to be X-rayed under the patient name "Rifle". While the chamber and ammunition tube were not loaded, the X-rays revealed a live .44-Winchester centerfire caliber cartridge in a compartment inside the buttstock.
|
|
A steel receiver is also available that is provided either with (SuperComp model) or without (Sportsman model) an adjustable monopod on the buttstock. It is a single-shot, meaning it has no magazine, internal or external. The barrel can also be furnished in either chrome-moly or stainless steel. The Ferret50 barreled upper receiver design is known for its high margin of safety, ease of maintenance, and simple head spacing procedure.
|
|
Like the SPW, the barrel changing handle, magazine insertion well, and vehicle mounting lugs have been removed to save weight. However, the Mk 46 retains the standard M249 plastic buttstock instead of the collapsible buttstock used on the SPW. The Picatinny rail forearm differs slightly from the SPW. The Mk 46 has the option of using the lighter SPW barrel or a thicker, fluted barrel of the same length. ;Mk 48 :This is a 7.62×51mm NATO version of the Mk 46, used by USSOCOM, when a heavier cartridge is required. It is officially classified as an LWMG (Light Weight Machine Gun) and was developed as a replacement for the Mk 43 Mod 0/1. The M60 based machine guns are a great deal more portable than the heavier M240 based designs used elsewhere in the US military in the infantry medium machine gun role. However, the M60 based designs have a long history of insufficient reliability.
|
|
The bullet leaves the muzzle at subsonic velocity, so it does not generate a sonic shock wave in flight. As a result of reducing the barrel's length and venting propellant gases into the suppressor, the bullet's muzzle velocity was lowered anywhere from 16% to 26% (depending on the ammunition used) while maintaining the weapon's automation and reliability. The weapon was designed to be used with standard supersonic ammunition with the suppressor on at all times. The MP5SD is produced exclusively by H&K; in several versions: the MP5SD1 and MP5SD4 (both have a receiver end cap instead of a buttstock), MP5SD2 and MP5SD5 (equipped with a fixed synthetic buttstock) and the MP5SD3 and MP5SD6 (fitted with a collapsible metal stock). The MP5SD1, MP5SD2 and MP5SD3 use a standard 'SEF' trigger group (from the MP5A2 and MP5A3), while the MP5SD4, MP5SD5, and MP5SD6 use the 'Navy' trigger group—a trigger module with a mechanically limited 3-round burst mode and ambidextrous selector controls (from the MP5A4 and MP5A5).
|
|
The trigger group is held in the receiver by two pins which makes removal for cleaning and maintenance very easy. Some models have a flip-up frontsight (which serves as a low-profile sight when closed) while others have a small blade sight. Other models were issued with ghost-ring sights. The forend and buttstock are synthetic black polymer with the latter having a synthetic rubber recoil pad mounted on the end.
|
|
In August 1916, Libby was commissioned and transferred to 11 Squadron. Upon arrival there, the first pilots he met were Albert Ball, John Quested, and Ernest Foot.Libby 2000. p. 161 In his memoirs, written many years after the event, Libby claims to have conceived a buttstock for the Lewis machine guns used by observers, that was then fabricated overnight by the gunnery sergeant of his unit and widely adopted as a standard fitting.
|
|
Compared to the birch plywood laminates that are used on AKM's buttstock, lower handguard and upper heatguard. No wood is used in the manufacture of large numbers of AMD-65s. The front handguard area is made of perforated sheet metal and typically has a gray plastic vertical foregrip attached to assist in controlling fully automatic fire from this short weapon. In addition, the vertical foregrip has been canted forward to lessen interference with magazine changes.
|
|
As a result, it is much more compact than the AS Val. The SR-3 is a select-fire, gas-operated action with a long stroke piston. It uses the same rotating bolt group from the AS Val, and fires from a closed bolt. It has a more compact, top-folding buttstock and a simplified flip-up rear sight which can be set for 100 metres or 200 metres distance compared to the AS Val.
|
|
The Model 1940 Light Rifle was assembled from a Tenite buttstock and milled steel parts with blued finish. The short barrel was fluted with twelve longitudinal indentations. A forward grip extending downward from the receiver served as a downward ejection port for spent cartridges and housed a detachable magazine with capacity for 20 cartridges. Although the ejection port design avoided flinging spent cartridges about, it proved difficult to clear when jammed cartridges caused malfunctions.
|
|
They are also testing on how to introduce a battle rifle into small infantry units. Possibly 2 to 3 designated marksman rifles and battle rifles are planned for use at squad level. The Italian Army is planning to introduce two configurations of the ARX200; a battle rifle with a foldable telescoping buttstock, capable of fully automatic and semi-automatic fire. It has a cyclic rate of fire of around 600–650 rounds per minute.
|
|
The rear of the buttstock can be lengthened with thick spacer plates so the length of pull and can be tailored for the individual shooter. The buttplate is also adjustable for height and can be raised or lowered up to . A metal sling attachment rail is integrated in the underside of the front of the stock. The sling is attached with a clamping lever that can be slid along the rail to its desired position.
|
|
The folding stock is heavier than the non-folding green, desert tan or dark earth stock variants and is hinged behind the pistol grip; it folds to the left side and locks into position. When folded, the rifle becomes shorter. The steel parts of the folding stock are manganese phosphatised and the polyurethane parts are coloured olive drab or desert tan. The rear of the buttstock is adjustable for length of pull and height.
|
|
The SIG MP310 is a submachine gun manufactured in Switzerland, developed from SIG's earlier wood stock MP46 design. Its magazine was able to fold forward 90 degrees under the gun barrel, and it was fitted with a collapsible wire buttstock. First introduced as the MP48 model in the late 1940s, the wood pistol grip and forestock were replaced in the 1950s with a polymer stock on the MP310. Production ended in 1972.
|
|
The top of the action goes straight back on a level with the barrel before cutting down sharply towards the buttstock. This distinctive feature makes it easy to identify A-5s from a distance. A-5s were produced in a variety of gauges, with 12 and 20 predominating; 16 gauge (not produced between 1976 and 1987) models were also available. The shotgun saw military service worldwide from World War I through the Vietnam War.
|
|
The MIL-STD-1913 Picatinny sight rail on top allows use of both conventional and night-vision sights, while retaining use of the original sights. U.S. Marine Corps fires an M1014 shotgun as part of training in December 2006. The modular basis of the shotgun means many of its features can be reconfigured as needed. It allows a user to quickly exchange the various assembly groups (barrel, buttstock, forearm, etc.) without the use of tools.
|
|
Its predominantly polymer construction reduces both its weight and the number of parts susceptible to corrosion. The UMP is available in four trigger group configurations, featuring different combinations of semi- automatic, 2-round burst, fully automatic, and safe settings. It features a side-folding buttstock to reduce its length during transport. When the user fires the gun's last round, the bolt locks open, and can be released via a catch on the left side.
|
|
The . bipod-mounted version was marketed as a light machine gun for use by assault troops. It was the only version with a buttstock. The . tripod-mounted version was considered a medium machine gun. The vehicle mounted version was a pintle- mounted machine gun for use by soldiers in land vehicles. The fixed mount version was fired by a solenoid allowing for remote operation so it could be mounted in a helicopter or other aircraft.
|
|
The redesigned bolt was paired with a new recoil spring which consisted of five wound strands around a central coil. This reduced recoil. The revised buttstock on the G41 is held in place by two pins. Unlike the earlier HK33, the G41’s pistol grip assembly is not retained by a pin at the front of the assembly behind the magazine well housing and can be removed by the user during a field strip.
|
|
The weapon is equipped with side-folding buttstock, which is adjustable for length of pull, and can be completely removed if maximum compactness is required. Additional equipment also includes a new, specially designed 40 mm underbarrel grenade launcher and a bayonet. The fire control unit includes ambidextrous safety/fire selector switch, which permits semi-automatic, 2-round bursts and full automatic fire. The charging handle can also be installed on either side of the weapon, depending on user preferences.
|
|
Boot pistol of the mid Victorian era. French muff pistol of 1805. During the 18th century, wealthy travellers concealed small single shot boxlock flintlock pistols in the pocket of an overcoat or waistcoat as protection from highwaymen.Handgun safety For the wealthiest clients, English and French gunsmiths produced a garniture comprising a fowling piece or hunting rifle, two large dueling pistols or horse pistols, and two small boxlock pistols with identical engraving on the barrel, lockplate and buttstock.
|
|
77 To release Lee–Enfield rifles for infantry use, the Royal Navy purchased approximately 5,000 .30-30 caliber Model 94 rifles in 1914 for shipboard guard duty and mine-clearing. France purchased 15,100 Model 1894 carbines equipped with sling swivels on the left side of the buttstock and barrel band, and with metric gradations on the No. 44A rear sight. These French carbines were issued to motorcycle couriers, artillery troops, trench railway personnel, and some balloon units.
|
|
In terms of basic design, the Evans repeating rifle is similar to the Spencer Repeating Rifle. However, the Evans has a rotary helical magazine in the buttstock, and cartridges are fed into the breech by cycling the cocking lever/trigger guard. Also, the magazine of the Evans has a much higher capacity than that of the Spencer, up to 28 rounds. The Evans holds four rows of cartridges which are loaded through a trapdoor in the buttplate.
|
|
The DSR-50 is based on DSR-Precision's earlier DSR-1, and includes modifications necessary to fire the more powerful .50 BMG, including a hydraulic recoil buffer in the buttstock and an innovative muzzle attachment. This muzzle device, described as a 'blast compensator', is a combination sound suppressor and muzzle brake, and is notable in its attempt at moderating the .50 BMG's muzzle blast and recoil, unlike contemporary large-caliber rifles, which are typically equipped with muzzle brakes only.
|
|
The cheek-rest is also fully adjustable. These adjustment options allow shooters of various sizes and shapes to tailor the APR folding stock to their personal preferences, which is an uncommon feature for folding stocks. An additional folding height-adjustable monopod is attached to the rear of the buttstock and allows the shooter to rest the rifle during extended periods of observation. A weapon's stock is made of a polymer material and is attached to the lower receiver.
|
|
In the early 1970s the HK21's design was simplified and the feed mechanism was modified. The machine gun's weight was increased, a carrying handle and a hooked buttstock with improved buffer mechanism were also added. The barrels were internally revised to polygonal rifling. Since then, the HK21 was offered in two main variants: the HK21A1 general-purpose machine gun (with a different belt feed mechanism) and the HK11A1 automatic rifle (optimized for magazine feed only).
|
|
The KK 62's receiver is machined from steel, and a tubular metal buttstock houses the recoil spring. To facilitate shooting with heavy mittens, there is no trigger guard. A substantial vertical bar in front of the trigger is used for pulling the trigger/handgrip assembly and bolt back when loading. The KK 62 is fed from the right-hand side, from 100-round belts that are carried in pouches that clamp onto the receiver wall.
|
|
The furniture (pistol grip and forearm) is made from a polymer material and is mounted to the frame. The buttstock is made from metal and has an adjustable shoulder pad for comfortable aiming and minimizing the effects of recoil on the operator. It is also adjustable for the length of pull and height, and can be folded to the left side of the receiver to reduce the overall dimensions of the rifle and make it more portable.
|
|
Benelli Tactical is a division of Beretta's Law Enforcement (LE) division. Benelli Tactical manages the sales of all Benelli tactical shotguns to law enforcement, government, and military entities. The M4 shotgun is sold in three configurations: M4 Entry with a 14 in barrel; M4 with an 18.5 in barrel; and M1014, which is an M4 with the "M1014" nomenclature on it for military usage only. M4 shotguns sold through Benelli tactical are available with the collapsible buttstock.
|
|
It was fed from a disintegrating metal belt using Stoner's proprietary S-63 BRW links. The S-63 BRW was a scaled-down 5.56mm NATO version of the M-60's M13 metal links for the 7.62mm NATO cartridge. Belted ammo was contained in a 150-round Stoner green or black plastic drum that mounted on the left-hand side of the weapon. Colt submitted a buttstock-less short- barreled CMG-2 to the Navy SEALs.
|
|
Major changes include the use of an adjustable buttstock, modified rail interface system, removal of the original hinged heat guard in favor of M249-style ones attached to the barrel, and modified bipod mount. ;Mk 48 Mod 2 prototype At the National Defense Industry Association’s annual Special Operations Forces Industry Conference (SOFIC), which began on May 20 2019, FN has unveiled a prototype of its new Mk 48 Mod 2 machine gun chambered for 6.5mm Creedmoor.
|
|
It has an integrated hydraulic recoil damping system in the buttstock and an integral muzzle brake. The forward-venting muzzle brake, also described as a linear compensator reduces the perceived muzzle blast. The DSR-50 Sniper Rifle is chambered for the BMG (12.7×99mm NATO) cartridge that is significantly larger than the Lapua Magnum cartridge, which is the biggest available chambering for the DSR-1 rifle. Sniper rifles chambered in BMG are often employed as anti- materiel rifles.
|
|
The QBZ-95-1 has a longer, heavier barrel and redesigned muzzle brake, a diamond-shaped cross- section on the handguard to disperse heat, a stronger buttstock and a redesigned trigger guard. The carrying handle was lowered to better position optics on the quick-releasable modified dovetail rail, and a pair of short rails at the sight's base allows for tactical accessories to be mounted. Some Chinese special forces are seen equipped with customized QBZ-95-1 rifle variants.
|
|
First introduced to IDF special forces in 1954, the weapon was placed into general issue two years later. The first Uzis were equipped with a short, fixed wooden buttstock, and this is the version that initially saw combat during the 1956 Suez Campaign. Later models would be equipped with a folding metal stock. The Uzi was used as a personal defense weapon by rear-echelon troops, officers, artillery troops and tankers, as well as a frontline weapon by elite light infantry assault forces.
|
|
Like the CW Sling, the Ching sling uses three sling sockets. Unlike the CW Sling, the Ching sling consists of a main strap, which is attached to the forearm and buttstock sockets like a normal carry sling, and a short strap. A clockwise half twist in the sling at the fore-end socket allows the strap to lie flat against the arm when shooting. A stop button screws onto the main strap about two-thirds back from the front loop.
|
|
Proponents of the Ching Sling maintain that the sling allows faster and quieter acquisition of shooting support. The sling requires no shifting of sling loops when converting from carrying mode to shooting mode and can be used on any rifle with existing sling loops in the normal locations with the addition of a middle sling loop and is flexible enough to be used with the rear loop located anywhere between the pistol grip cap and the end of the buttstock.
|
|
Variations include the "Chicago Typewriter" 1927A-1 which resembles the Model 1921AC of the gangster era; the 1927A-1 "Commando" which resembles the early World War II Model 1928A1 Thompson with the Cutts Compensator; the TM1 which resembles the later World War II M1 Thompson with the side-mounted bolt handle; and a "Thompson pistol" that essentially is an M1928 without provision for mounting a buttstock. Kahr Auto-Ordnance also manufactures replicas of the U.S. World War II M1 carbine and M1911 pistol.
|
|
The AR-15's upper receiver incorporates the fore stock, the charging handle, the gas operating system, the barrel, the bolt and bolt carrier assembly. The lower receiver incorporates the magazine well, the pistol grip and the buttstock. The lower receiver also contains the trigger, disconnector, hammer and fire selector (collectively known as the fire control group). The AR-15's "duckbill" flash suppressor had three tines or prongs and was designed to preserve the shooter's night vision by disrupting the flash.
|
|
Many rifles and shotguns are manufactured with a standard length of pull assumed to fit most shooters. This is often approximately for rifles and about longer for shotguns. Shooters with short arms may find the buttstock dragging along the underside of their arm as they attempt to raise the firearm into firing position. Shooters with broad shoulders or a long neck may experience face injuries from collision with the telescopic sight or thumb of the trigger hand as the firearm recoils.
|
|
This forward sling attachment point can be (re)positioned along the length of the rail for right- or left-handed use and is fixed with a screw. The factory carrying/shooting sling itself features quick mountable and detachable metal swivels. The swivels are mounted by pushing them into an attachment socket and detached by pushing integrated buttons in the swivels and pulling them out of the attachment sockets. A folding skeleton type buttstock designed for right- and left-handed shooters is also available.
|
|
This carbine is very similar to the standard m/1894 except in the manner of sling attachment. This carbine uses a sling attachment identical to the skolskjutningskarbin as the sling swivels are on the bottom of the stock instead of the side. The lower sling swivel is placed much further up the buttstock nearer the triggerguard than the m/1896 rifle. Weapons Officers Carbines: These standard m/1894 carbines were hand-built by weapons officers as part of their training.
|
|
Video...Rifle 5.56mm, XM16E1. Operation and Cycle of Functioning. M16A1 rifle M16A1 cutaway rifle (top) M16A2 (below) The M16 is a lightweight, 5.56 mm, air-cooled, gas-operated, magazine-fed assault rifle, with a rotating bolt. The M16's receivers are made of 7075 aluminum alloy, its barrel, bolt, and bolt carrier of steel, and its handguards, pistol grip, and buttstock of plastics. The M16 internal piston action was derived from the original ArmaLite AR-10 and ArmaLite AR-15 actions.
|
|
Some parts of the XB6 resembled FN FNC such as the suppressor and sights. Further development of the XB6 evolved into the XB7 and finally the XB7C, also known as the XK2. Externally similar in appearance to the AR18, the K2 uses polymer for the forearm, pistol-grip and side-foldable buttstock. The fire control system and bolt carrier group are derived from the American M16 rifle, but few of the parts, including the bolt and carrier, are interchangeable with the M16.
|
|
Loading was through an opening in the magazine itself located between the fore-end and the receiver. The bolt unlocked via a button pressed through the ejection port though firing the gun automatically unlocked the bolt. The Model 14 was a takedown rifle that featured a single knurled screw on the left side of the receiver that was withdrawn allowing the trigger group and buttstock to be removed from the bottom of the gun. Original prototypes were chambered for the .
|
|
Different styles of gunstock grips The grip portion of the buttstock is held by the shooter's trigger hand during firing, and is the part of the butt that connects with the fore-end. The back part of the grip is called the tang. Many grips have roughened textures or even finger grooves engraved into the sides to increase the firmness of the shooter's hold. Some grips have a thumb rest (or thumb groove) carved near the tang to give a more ergonomic hold for the trigger finger.
|
|
As of 2007, the weapon is available in a wide array of variants; available barrel lengths are 12.5”, 16" and 20" inches, with two different stocks available: standard hunting rifle stock, sporting stock with fixed buttstock and pistol grip. The 12.5 inch barrel is threaded and features a removable muzzle brake. The MR1 has a MIL-STD-1913 “Picatinny” top rail, with side and bottom and fore-end rails optional. The gas port is located just forward of the chamber where the gases are hotter and cleaner.
|
|
Illustration from a WW2 US Army field manual: "Smash following vertical butt stroke." A buttstroke or butt-stroking is the act of striking someone with the buttstock of a rifle, shotgun, or similar long gun. It is a common case of the use of a firearm as a blunt weapon. Buttstroke is among the major offensive techniques with the rifle and bayonet in close-at-hand combat and is the recommended method of close combat if the rifleman has no bayonet or sidearm available.
|
|
Rail systems usually are based on the handguard of a weapon and/or the Upper receiver. On modern pistols they are on the underside of the barrel. Rails on rifles usually start off at top dead center or 12 o'clock with the next placement at bottom 180° degrees or at 6 o'clock. on the forward section, away from the buttstock. With both sides 3 o'clock & 9 'o clock or 90° degrees each side of top center 0°/360° degrees becoming the 3rd & 4th most common.
|
|
Factory engraving was done by hand at FN Herstal, and is done by laser engraving with hand finishing at Miroku. It has occasionally been sold with a factory fitted hard case, or with scope mounting grooves on the receiver. Initial production models had a small loading port located on the top of the stock in contrast to later models which had the loading port located on the right side of the buttstock. Over half a million SA-22 rifles have been sold since 1914.
|
|
The weapon is coated with a rust-resistant coating which doubles as a dry lubricant. Owing to a wide variety of muzzle devices (including silencers, heat shields, and even rifle grenades), the weapon can be used to fire non-lethal and explosive projectiles by the means of blank cartridge, as well as normal ammunition. The BXP also features an underfolding buttstock, made from stamped steel. The standard sights are of open type, but the BXP can be equipped with laser aiming modules and collimating sights.
|
|
Finally, the cheek-piece is adjustable for both height and pitch as well.Sako TRG-42 with an optional newer model folding stock in a desert tan finish, an MSSR integrated extended rail system, and a 510 mm (20.08 in) barrel. The stock features two steel sling swivel attachment sockets positioned at the right and left rear sides of the buttstock. Forward sling attachment is achieved by inserting and fixing a metal sling mount into a metal rail which runs under the forestock or forend.
|
|
As the next shell aligned with the bore, the barrel returned under spring pressure back into the front end of the cylinder. Spent shells were retained in the cylinder, as in a traditional revolver. The Jackhammer has a charging handle in the forward grip to charge the weapon and a cocking lever in the buttstock to recock the firing mechanism in case of light strikes to the primer. For reloading, the cylinder was removed from the bottom of its housing and shells were manually extracted.
|
|
Benelli Tactical and Beretta LE have maintained the belief that the collapsible buttstock, while no longer illegal in the United States, is still only to be made available to law enforcement and government agencies. Benelli Tactical/Beretta LE will not sell these stocks to private individuals. Benelli Tactical does sell the stock piece for retrofitting the pistol grip stock for $150. The stock must be direct-shipped from Italy, however it and other aftermarket stocks are commercially available and not restricted by the United States.
|
|
The Tantal features a metal wire side-folding stock (folds to the right side), ended with a profiled shoulder pad. The rifle can also use a fixed wooden or synthetic buttstock designed for AKM or AK-74 rifles. Both the upper and lower handguard and pistol grip are fabricated from bakelite, although a limited number of Tantal-specific black polymer handguards and pistol grips have also been produced. Most handguards designed for use with the wz. 1996 Beryl assault rifle may also be installed on the Tantal.
|
|
Many firearms made in the late 19th century through the 1950s used internal magazines to load the cartridge into the chamber of the weapon. The most notable and revolutionary weapons of this period appeared during the U.S. Civil War and they were the Spencer and Henry repeating rifles. Both used fixed tubular magazines, the former having the magazine in the buttstock and the latter under the barrel which allowed a larger capacity. Later weapons used fixed box magazines that could not be removed from the weapon without disassembling the weapon itself.
|
|
The stock is made from fiberglass by McMillan Stocks, and is designed to be used from a bipod only. The buttstock is adjustable for length of pull with rubber spacers, and can be removed for compact storage. The rifle has no open sights; it can be used with a variety of telescopic or night sights. In Canadian service, the standard telescopic sight was the McMillan endorsed Leupold Mark 4-16x40mm LR/T M1 Riflescope optical sight that has now been replaced by the Schmidt & Bender 5-25x56 PMII telescopic sight.
|
|
The TADEN used the action and gas system of the Bren but would fire from 250-round non-disintegrating metal-link belts rather than box magazines. The light machinegun model used a buttstock and trigger group like the Bren and the medium machine gun model used spade grips and a butterfly trigger like the Vickers machine gun. The TADEN would replace the Bren gun as the light machine gun and the Vickers machine gun as the medium machine gun. The EM-2 would replace the Lee–Enfield rifle and 9 mm submachine guns.
|
|
Shotguns and shotgun receivers that have never had a buttstock of any type installed are not shotguns, as they cannot be shoulder mounted. Therefore, cutting one of these below the 18" barrel and/or 26" overall length cannot produce a SBS as the firearm was never a shotgun. The Bureau of Alcohol, Tobacco, Firearms & Explosives recognizes these firearms as being a smooth bore handgun which is an Any Other Weapon (AOW). Unlike an SBS, an AOW only carries a $5.00 tax and can be moved interstate without Federal approval.
|
|
A USAF Combat Control Team member with a GAU-5 carbine and oversized flash suppressor. A USAF security policeman aims his Colt Commando during a live-fire demonstration, part of Operation Desert Shield. Note: large flash hider The Colt Commando was not initially part of the CAR-15 Military Weapons System, but was added in 1966 in response to the US military's desire for a shorter M16 and without the Model 607 SMG's inadequacies. Colt engineer Rob Roy designed a simpler two- position telescoping tubular aluminum buttstock to replace the complicated extending triangular version.
|
|
The M240D is an upgrade of the M240E1, primarily in the addition of an optical rail on the receiver cover. It has two possible configurations: aircraft and egress (ground). In the aircraft configuration, the M240D has a front and rear sight and a trigger group which accommodates the spade grip device, while the ground configuration involves the installation of an egress package or "infantry modification kit", which is designed to provide downed aircrew personnel with increased firepower. The egress package contains a buttstock assembly, a buffer assembly, a bipod assembly, and a conventional trigger assembly.
|
|
Diemaco changed the trapdoor in the buttstock to make for easier access, and a spacer is available to adjust stock length. The most noticeable external difference between American M16A2s and Diemaco C7s is the retention of the A1 style rear sights. Not so apparent is Diemaco's use of hammer-forged barrels, introduced as the Canadians originally wished to use a heavy barrel profile instead of the M16A2 profile. Also, Diemaco has developed a different mounting system from Colt for the M203 grenade launcher for the C7 rifle family.
|
|
The robbery was solely made possible because of inside knowledge and help. The police recovered the last of the stolen weapons on 22 November 2011. In 2010 the Danish Defence Materiel Service ordered an improved version of the M/96 and M/95 from Colt Canada under the Danish designation M/10, which Colt Canada designated the C8 IUR.New Canadian-Made Rifles for the Danish Army – C8 IUR M/10 It features a floating barrel, fully ambidextrous controls, flip up iron sights, a collapsible buttstock with more positions, and the Integrated Upper Receiver (IUR).
|
|
Steyr ACR layout schematic The Steyr ACR has some superficial resemblance to the Steyr AUG, although it is rounder and the barrel is covered for almost its entire length, as opposed to the AUG where much of the barrel was exposed. Like the AUG the ACR is a bullpup design with the 24-round magazine located quite close to the buttstock of the gun. The stock was "split" from the magazine forward to a location just below the sights to open for cleaning. An optical sight was included as a standard feature.
|
|
It featured a metallic buttstock, a plastic handguard and pistol grip but lacked the trigger guard (it was hoped that it would make firing this weapon easier in cold Finnish winter when soldiers wore warm mittens). The very first prototypes, closely modeled after Polish licence made AKs, had tinted birchwood stocks. After testing by the military, the RK 60 was slightly modified (trigger guard was reinstated) and adopted as the 7.62 RK 62. In August 2015, the Finnish Defence Forces announced that they will gradually modernize existing RK 62 rifles.
|
|
The OA-93 is an AR-15 derivative pistol manufactured by Olympic Arms. Lacking a buttstock or buffer tube, the OA-93 disperses recoil through a specially designed flat top upper receiver similar to the Armalite AR-18. The passage of the 1994 Crime Bill however required Olympic Arms to perform modifications to the basic design to continue selling them. The first revision to the OA-93 was the OA-96 in which a 30-round ammunition well is pinned and welded in place so that it cannot be detached.
|
|
338 Lapua Magnum rifle cases.SAKO TRG 22/42 UPGRADE In 2018 Sako introduced the TRG-22 A1 and TRG-42 A1 models. The TRG A1 models have a Sako TRG M10 Sniper Weapon System alike stock, featuring an aluminium middle chassis frame, side-folding buttstock, and a fore-end with the M-LOK rail interface system that allows for direct accessory attachment onto "negative space" (hollow slot) mounting points. The TRG A1 models do not offer the user configurable multi calibre modular system of the Sako TRG M10 Sniper Weapon System.
|
|
The polymer stock has an adjustable buttstock and pistol grip. Ammunition is fed from a detachable box magazine, with a standard capacity of 20 rounds of 7.62 mm ammunition, although 5 and 10 round magazines are available if required by local legislation. There are no iron sights installed by default; each FNAR rifle is fitted with a Picatinny rail on the top of the receiver, and three more short rails are installed at the front of the rifle stock. The FNAR uses a two-stage non-adjustable trigger specified at between 3.25 and 5.5 pounds.
|
|
The Martini–Henry rifle was adopted in 1871, featuring a tilting-block single-shot breech-loading action, actuated by a lever beneath the wrist of the buttstock. The Martini–Henry evolved as the standard service rifle for almost 20 years, with variants including carbines. Unlike the Snider it replaced, the Martini–Henry was designed from the ground up as a breech-loading metallic cartridge firearm. This robust weapon uses a tilting-block, with a self-cocking, lever operated, single-shot action designed by a Swiss, Friedrich von Martini, as modified from the Peabody design.
|
|
The standard squad automatic weapon in Afghanistan is the M249 with PIP kit, which serves alongside its heavier counterpart, the M240 machine gun. Most M249s were given a collapsible buttstock immediately prior to the invasion to reduce its length and make the weapons more practical for parachuting and close-quarters combat. Special Operations troops typically favor the shorter Para version of the weapon, which weighs much less. A report entitled Lessons Learned in Afghanistan was released by Lieutenant Colonel Charlie Dean and SFC Sam Newland of the U.S. Army Natick Soldier Center in 2002.
|
|
The pistol could be used for hunting, to defend against predators and for visible and audible distress signals. The detachable buttstock was also a machete that came with a canvas sheath. The upper two shotgun barrels used 12.5×70 mm ammunition (40 gauge), and the lower rifled barrel used 5.45×39mm ammunition developed for the AK-74 assault rifle. The TP-82 had a large lever on the left side of the receiver that opens the action, and a small grip- safety under the trigger-guard that resembled a secondary trigger.
|
|
Diagram of the Spencer rifle showing the magazine in the butt The design for a magazine-fed, lever-operated rifle chambered for the .56-56 Spencer rimfire cartridge was completed by Christopher Spencer in 1860. Called the Spencer Repeating Rifle, it was fired by cocking a lever to extract a used case and feed a new cartridge from a tube in the buttstock. Like most firearms of the time, the hammer had to be manually cocked after each round in a separate action before the weapon could be fired.
|
|
The weapon used copper rimfire cartridges, based on the 1854 Smith & Wesson patent, stored in a seven-round tube magazine. A spring in the tube enabled the rounds to be fired one after another. When empty, the spring had to be released and removed before dropping in fresh cartridges, then replaced before resuming firing. Rounds could be loaded individually or from a device called the Blakeslee Cartridge Box, which contained up to thirteen (also six and ten) tubes with seven cartridges each, which could be emptied into the magazine tube in the buttstock.
|
|
While an obvious copy of the MG42 (which then had only been produced for two years), it was dubious why a quick-change barrel was necessary on a submachine gun. The bolt has the rat-tail, similar to a Solothurn MP-34, where the spring is contained within the buttstock. This is an interesting example of "making a gun out of sheetmetal" rather than "making a sheet metal gun". Photos of the Hyde gun appear in the first edition of The World’s Assault Rifles by Daniel Musgrave and Thomas B. Nelson, published in 1967.
|
|
The rifled barrel is fitted with a flash suppressor, which is also used to attach rifle grenades and a bayonet. The iron sights consist of a hooded foresight that can be corrected in elevation and an adjustable (windage only), rotating rear drum that contains four apertures with settings for firing at: 100, 300, 400 and 500 m. The receiver top surface can be used to mount adapters enabling the use of optics. The SG 540 series come equipped with either a fixed buttstock or a side-folding metal skeleton stock.
|
|
Following design from machine pistols like the Uzi, the MSMC has a pistol grip which allows the user to fire it even with one hand. This allows the insertion of 30-round MSMC magazines on the pistol grip. It has a retractable buttstock and ambidextrous cocking levers on both sides of the MSMC, alongside the fire selectors to suit individuals who prefer to fire the weapon from either the left or right shoulder located above the trigger. The MSMC has a rate of fire of around 800 rpm with a mass of less than 3 kilograms.
|
|
The RM2 of 1955 was a greatly simplified version with reduced production costs that differed significantly from its predecessors. It had a fixed smooth barrel with a slash-cut slotted muzzle brake, simplified gas cylinder, different front and rear sights, less-raked handguard / foregrip, separate handguard and buttstock assemblies, side-mounted sling swivel on the left side just above and behind the pistol grip, and a straight sided magazine. It was more of a heavy- barreled automatic rifle than a LMG, and was not as effective as the M1933 or M1945. It was not adopted for general service.
|
|
Although the United States had already tested the CAR-15 Model 607 submachine gun in Vietnam, it had a number of shortcomings, including overwhelming muzzle blast and an overly complicated, unreliable collapsible stock. To address these problems, Colt came up with the XM177, which featured a number of improvements. The triangular collapsible stock was replaced with a much simpler two-position telescoping tubular aluminum buttstock, while the fragile improvised handguards of the Model 607 were replaced by reinforced round handguards. Each half of the round handguard is identical, simplifying logistics by not requiring a top/bottom or left/right pair.
|
|
Nighthawk offers customizable shotgun services including a massive range of add-on products and peripherals which are external and internal. The gun is built from a stock Remington 870. The finish is Perma Kote and a range of sights are available, whether added to the frame such as the Fiber Optic front sight to the Picatinny rail Aimpoint Comp M4, a sight more regularly is seen on the M4 Carbine and M16A4 assault rifles. The shotgun is available with M4-inspired five-position crane stock or a more conventional Hogue buttstock with an in-frame pistol grip.
|
|
The FAL's short- stroke gas piston, which is actuated by gas bled from the barrel via a vent located in the foresight housing, and which impinges upon the separate bolt carrier, is retained. Feeding is from STANAG 4179 M16-compatible magazines. The versions differ in that the MD-2 uses the side-folding buttstock from the FN FAL 'para' variant, while the MD-3 uses the fixed polymer stock of the standard FAL. The MD-2 series contains many FAL-derived parts, some of which remain interchangeable with the original FAL, and others which are modified to suit the new design.
|
|
The Model 608 CAR-15 Survival Rifle was meant for use by downed aircrew. Because of the CAR-15's modular design, the Survival Rifle could be broken down into two subassemblies and stowed with four 20-round magazines in a pilot's seat pack. Resembling a Colt Commando, it also has a barrel and is in overall length when assembled. The Survival Rifle used a fixed tubular plastic-coated aluminum buttstock and a round handguard that were not used on the other CAR-15 versions, and did not have either a forward assist or a bayonet lug.
|
|
In the early 1970s, Colt began development of an M16 carbine with a long pencil barrel. The barrel length was compatible with the existing carbine-length gas system and allowed for the mounting of a standard M16 bayonet. Despite having a longer barrel, it's no longer than the Colt Commando, as the longer barrel did not require the long 4.5 inch moderator of the XM177 series, only the much shorter M16 birdcage- type flash hider. Colt labeled the M16 carbines the Model 651, 652, 653, or 654, depending on whether or not it had a fixed or retractable buttstock, or a forward assist.
|
|
The STL-1A is made by Z111 Factory as early as 2015 by changing parts of used AKMs with new plastic handguards, folding buttstock, ergonomic pistol grip and updated muzzle brake resembling the AK-74 with an attachment lug for use with a M203 grenade launcher known as the STL-1A. A future upgrade, known as the STL-1B, will include Picatinny rails since the 1A uses a side-type attachment. Vietnam also makes AKM-1, a AKM version which has replaced wood stock and hand guards with Polyamide made, implemented Soviet style optics mounting rail.
|
|
The buttstock, lower handguard and upper heatguard were first manufactured from laminated wood, this later changed to a synthetic, plum or dark brown colored fiberglass. The AK-74 gas tube has a spring washer attached to its rear end designed to retain the gas tube more securely. The lower handguard is fitted with a leaf spring that reduces play in the rifle's lateral axis by keeping the wood tensioned between the receiver and the handguard retainer. The receiver remains nearly identical to that of the AKM; it is a U-shaped thick sheet steel pressing supported extensively by pins and rivets.
|
|
A handguard usually encloses the barrel and a gas-operated reloading device using burnt powder gas vented from a hole (or port) in the barrel near the forward end of the handguard. The handguard is attached to the upper receiver and may also be attached to the barrel. The initial design included a tube to vent burnt powder gas back into the bolt carrier assembly where it expands in a variable volume chamber forcing the bolt open to eject the spent cartridge case. A buffer spring in the buttstock then pushes the bolt closed picking up a new cartridge from the magazine.
|
|
SxS shotguns are often more expensive, and may take more practice to aim effectively than a O/U. The off-center nature of the recoil in a SxS gun may make shooting the body-side barrel slightly more painful by comparison to an O/U, single-shot, or pump/lever action shotgun. Gas-operated, and to a lesser extent recoil-operated, designs will recoil less than either. More SxS than O/U guns have traditional "cast-off" stocks, where the end of the buttstock veers slightly to the right, allowing a right-handed user to point the gun more easily.
|
|
A new assault rifle known as the VHS-2 was shown to the public for the first time in April 2013, during the Adriatic Sea Defense & Aerospace (ASDA) exhibition in Split, Croatia. The new weapon is an improved version of the VHS rifle which retains its bullpup design, caliber and barrel length, as well as the internal mechanism, but introduces a new, more conventional fire selector, a redesigned carrying handle, an adjustable-length buttstock, and an ambidextrous cartridge casings ejection system that can be configured for either right or left side ejection in less than a minute.
|
|
A Henry rifle, the first successful lever action repeating rifle A rifle is a long-barrelled firearm designed for accurate shooting, with a barrel that has a helical pattern of grooves ("rifling") cut into the bore wall. In keeping with their focus on accuracy, rifles are typically designed to be held with both hands and braced firmly against the shooter's shoulder via a buttstock for stability during shooting. Rifles are used extensively in warfare, law enforcement, hunting and shooting sports. The term was originally rifled gun, with the verb "rifle" referring to the early modern machining process of creating groovings with cutting tools.
|
|
Introduced in 1965, the Model 444 Marlin uses the Model 336 lever action mechanism, including the signature open ejection port machined into the side of the receiver, but is chambered for the .444 Marlin cartridge. At its introduction, the Model 444 was the most powerful lever action rifle on the market. With a muzzle energy of more than 3000 ft-lb, the Model 444 was intended for the largest North American game animals. The Model 444 holds 4 cartridges in the magazine and one in the chamber, and was originally fitted with a 24-inch barrel and a straight grip buttstock.
|
|
The thickness of the M72's barrel exists to facilitate heat distribution via mass and cooling via surface area. Since the option to fire full-auto has been omitted (and it is not typical of eastern bloc long range precision rifles to use heavy barrels for accuracy) the Tabuk, like the SVD and the PSL, has a relatively light barrel. The Tabuk differs from the M72 in some other ways. It has provision for mounting optics, though this is not an unusual accessory on Eastern Bloc weapons, and it has a skeletonized buttstock with a cheek piece.
|
|
In mid-1930s Polish small arms designer Wawrzyniec Lewandowski was charged with developing a flexible gun based on the Browning wz.1928. The desired changes included raising the cyclical rate of fire to 1100 rds/min, replacing the buttstock with a spade grip at the rear of receiver, moving the main spring under barrel and, most importantly, changing the feed system. The gun's original 20 round box magazine was impractical with the gun's high rate of fire. The solution was found in developing a new feeding mechanism, which was added as a pack to the standard receiver.
|
|
The first Siamese Mauser used the Gewehr 98 bolt with the cock-on-open action, but removed the recoil lug with the narrower lines of the Mauser model of 1896. Some features and characteristics of the Japanese Type 35 rifle (under development in the same arsenal at that time) were also incorporated, such as the sliding dust cover and long wrist tangs. Some Siamese Type 46 rifles also have a split buttstock common on Arisaka rifles. Although the design was licensed from Mauser, none of the components of the Siamese rifles are interchangeable with other Mauser rifles. The Type 46 was chambered for the Type 45 8 x 50mm rimmed cartridge.
|
|
Alternatively, a left-handed shooter may release the bolt by pulling the rubber-coated charging handle to rear a short distance. The SG 550 has a side-folding skeletonized buttstock (folds to the right side of the receiver) and a lightweight aluminium bipod that folds into grooves in the lower handguard. The hinged stock is firmly locked in the folded position by a socket in the butt which clips into a plastic stud on the handguard; a firm pull will release the stock which is then swung into the closed position and locked by a button catch. A collapsible side-folding stock is also available.
|
|
It uses a modified AKM recoil spring assembly that consists of a rear spring guide rod from the AK and a new forward flat guide rod and coil spring. It features a thick laminated wood foregrip and a fixed laminated wood "club-foot" buttstock similar to the stock used on the RPD, which is designed to allow the user to fire from the prone position more comfortably. It uses a standard AKM pistol grip and can also use standard AKM detachable box magazines, but it is most commonly used with a 40-round box magazine or a 75-round drum magazine. Interchangeability of parts between the RPK and AKM are moderate.
|
|
The trigger assembly can be removed from the receiver as a single unit, and features adjustment screws for weight (2 to 4 lbs.) and overtravel, as well as a reversible AR-15/M-16 style thumb safety. The skeletonized buttstock is also integral to the lower receiver, and features a thick Sorbothane buttpad with spacers for pull adjustment, a polymer cheekpiece with of variable comb height, and an adjustable monopod. The rifle also comes from the factory with a Harris brand S-BR bipod attached to the fore-end. The Model 98B was featured both on the cover, and in an article, of the April 2009 issue of American Rifleman magazine.
|
|
The steel buttstock folds up and above the receiver when not in use. The charging handle is welded to the right side of bolt carrier on earlier production guns with current production guns having a charging hand that folds up, making the gun more low profile by decreasing the chances of the charging handle snagging onto articles of clothing and equipment. Earlier production models of the 9A-91 featured the safety / fire selector lever at the left side of the receiver, above the trigger guard. Current production models feature the safety / fire selector lever at the right side and a sight mounting rail on the left side of the receiver.
|
|
A tang sight with adjustable elevation, designed to fold down to minimize damage during transport A tang sight is the rear sight of a pair of iron sights used to aim or align a rifle so the bullet fired will hit the target. The sight is attached to the tang: a steel plate extending toward the butt from a rifle receiver for attachment of the receiver to a wooden buttstock. A tang sight often offers the maximum sight radius, or distance between the front and rear sights attached to the rigid receiver and barrel assembly of a rifle. Large sight radius decreases bullet placement errors caused by sight misalignment.
|
|
58 was produced in three main variants: the standard vz. 58 P (Pěchotní or "infantry") model with a fixed buttstock made of a synthetic material (wood impregnated plastic, older versions used a wooden stock), the vz. 58 V (Výsadkový—"airborne"), featuring a side-folding metal shoulder stock, folded to the right side, and the vz. 58 Pi (Pěchotní s infračerveným zaměřovačem—"infantry with infrared sight"), which is similar to the vz. 58 P but includes a receiver-mounted dovetail rail bracket (installed on the left side of the receiver) used to attach an NSP2 night sight; it also has a detachable folding bipod and an enlarged conical flash suppressor.
|
|
The less expensive and more-easily manufactured "stick" magazines were used exclusively in the M1, with a new 30-round version joining the familiar 20-round type. The Cutts compensator, barrel cooling fins, and Blish lock were omitted while the buttstock was permanently affixed. Late production M1 stocks were fitted with reinforcing bolts and washers to prevent splitting of the stock where it attached to the receiver. The British had used improvised bolts or wood screws to reinforce M1928 stocks. The M1 reinforcing bolt and washer were carried over to the M1A1 and retrofitted to many of the M1928A1s in U.S. and British service.
|
|
Initially all steel without handgrips, the wire buttstock was welded to the frame and was typically triangular, however the design changed as conditions inside Germany worsened and on final guns wooden stocks and other variations are found. The Gerät Potsdam, another version of the Sten Mk II produced by Mauser in 1944, was an exact copy of the original Sten, right down to its manufacturing stamps in an effort to conceal its origin for clandestine operations. About 28,000 were claimed to have been produced, but postwar interrogations of highly ranked Mauser personnel failed to provide proof that any more than 10,000 units had been made.
|
|
The Minimi prototype was originally designed in 7.62×51mm NATO, and later redesigned for the 5.56 mm cartridge. When the USSOCOM issued the requirements for the Mk 48 Mod 0, the original plans for the Minimi were retrieved and used to develop this new model. As a result of favorable reviews of the Mk 48 Mod 0 and increasing demand for a more powerful variant of the Minimi, FN Herstal introduced the Minimi 7.62, available in several different configurations. Apart from the different caliber, the Minimi 7.62 incorporates a non-adjustable, self-regulating gas system and a hydraulic recoil buffer in the buttstock assembly.
|
|
While the weapons delivered on their promise of extremely high rates of fire and excellent penetration, the rounds themselves were extremely expensive to produce, and the darts could be easily deflected in flight even by heavy rain. Finally, the rounds gave off extremely loud reports and had a huge muzzle flash, making the guns easily visible in low light. A second round of testing followed, with the Springfield model adopting the Winchester grenade launcher with a disposable magazine and a new side-by-side layout for the flechette magazines. AAI's design was equipped with their semi-automatic launcher, which was now complete, and a new plastic buttstock/sighting system.
|
|
The M1918 feeds using double-column 20-round box magazines, although 40-round magazines were also used in an anti-aircraft role; these were withdrawn from use in 1927. The M1918 has a cylindrical flash suppressor fitted to the muzzle end. The original BAR was equipped with a fixed wooden buttstock and closed-type adjustable iron sights, consisting of a forward post and a rear leaf sight with 100 to 1,500 yard (91-1,372 m) range graduations. As a heavy automatic rifle designed for support fire, the M1918 was not fitted with a bayonet mount and no bayonet was ever issued, though one experimental bayonet fitting was made by Winchester.
|
|
The Ak 4 (Swedish: Automatkarbin 4) is a Swedish-made version of the Heckler & Koch G3A3 battle rifle, with a buttstock that is longer, the bolt carrier has a serrated thumb groove to aid in silent bolt closure and fitted with a heavy buffer for higher number of rounds fired before failure. The Ak 4 iron sights feature extended sight adjustments in increments. The rifles were manufactured from 1965 to 1970 by both Carl Gustafs Stads Gevärsfabrik and Husqvarna Vapenfabrik and from 1970 until the end of production in 1985 – exclusively by Gevärsfabrik in Eskilstuna. All Ak 4s are adapted to mount the M203 grenade launcher.
|
|
However, women had their own World Championships, and in 2000, a female skeet event was introduced to the Olympic program. In Olympic skeet, there is a random delay of between 0 and 3 seconds after the shooter has called for the target. Also, the shooter must hold his gun so that the buttstock is at mid-torso level until the target appears. Another difference with American skeet is that the sequence to complete the 25 targets in a round of Olympic skeet requires shooters to shoot at doubles, not only in stations 1, 2, 6, and 7, as in American skeet, but also on 3, 4, and 5.
|
|
The AK-9 is based on the so-called "hundred series" of Kalashnikov assault rifles, such as the AK-104, but with certain improvements. It is a selective fire compact assault rifle chambered in 9×39mm subsonic cartridge. The AK-9 features the same tried and proven gas operated, rotary bolt action and same "Kalashnikov-style" controls including reciprocating bolt handle, safety/fire selector lever and overall layout with side-folding polymer buttstock. The Polymer furniture is improved with the addition of accessories such as a Picatinny rail on the bottom of the forend and the left side of the receiver is fitted with a Warsaw Pact rail.
|
|
In traditional one-piece rifle stocks, the butt also varies in styles between the "European" type, which has a drop at the heel to favor quick shooting using iron sights; and "American" type, which the heel remains horizontal from the grip to favor more precision-oriented shooting using optical sights. There are also in-between designs (such as the Weatherby Mark V) with a "halfway" heel drop where the front half of the buttstock stays leveled. Collapsable or folding stocks are often seen on military-grade carbines, SMG/PDWs and their civilian-derived versions. A collapsible (or telescoping) stock makes the weapon more compact for storage, carrying and concealment, and is usually deployed just before shooting for better control.
|
|
These include a certain number of US-made parts in the finished rifle. This count is required in order to comply with U.S.C. 922 (r); a statute which regulates imported rifles with certain features that the BATFE defines as not being suitable for sporting purposes. Some individuals choose to build AMD-65s without a buttstock, thus legally classifying the resulting new firearm as a "pistol" and eliminating the need for a muzzle extension (as well as the parts for 922r compliance). However, this route requires the removal of the forward grip, unless the gun is registered under the NFA as an "AOW" (any other weapon) or has an overall length greater than .
|
|
Following the poor sales of the SAR 80, and with their involvement with the Sterling SAR-87, CIS came up with an improved design – the new SR 88. Many of the parts and mechanisms are similar to its predecessor. Later production models were further improved with higher quality materials including a new handguard and buttstock, this version was designated the SR 88A. The SR 88A was built in two versions, the standard model and the latest carbine model which is a heavy-duty mil-spec version with a shorter barrel and a retractable butt-stock popularly called today as the "baby ultimax" because of its overall shorter length and function and frame similarities with the Ultimax 100.
|
|
Many of the first repeating rifles, particularly lever-action rifles, used magazines that stored cartridges nose- to-end inside of a spring-loaded tube typically running parallel under the barrel, or in the buttstock. Tubular magazines are also commonly used in pump- action shotguns and .22 caliber bolt-action rimfire rifles such as the Marlin Model XT. Tubular magazines and centerfire cartridges with pointed (spitzer) bullets present a safety issue: a pointed bullet may (through the forces of recoil or simply rough handling) strike the next round's primer and ignite that round, or even cause a chain ignition of other rounds, within the magazine. The Winchester '73 used blunt-nosed centerfire cartridges as the .
|
|
Mauser 98 Short-barreled rifle (SBR) is a legal designation in the United States, referring to a shoulder-fired, rifled firearm, made from a rifle, with a barrel length of less than or overall length of less than , or a handgun fitted with a buttstock and a barrel of less than 16 inches length. In the United States, an SBR is an item regulated by the Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) as a Title II weapon. In the absence of local laws prohibiting ownership, American civilians may own an SBR provided it is registered with the ATF, and a $200 tax is paid prior to taking possession of or creating the firearm.
|
|
It was accepted, and in March 1941, H&R; started manufacturing the Model 50 full stocked submachine gun. Months later, production began on the Model 55 (identical to the Model 50 other than having a folding wire buttstock, no compensator, and a barrel half an inch shorter); and the Model 60 full stocked semiautomatic rifle that also resembled a Model 50, but had a 7.75 inch longer barrel without cooling fins or compensator. H&R; promoted the submachine guns for police and military use, and the Model 60 for security guards. After the Japanese attack on Pearl Harbor in December 1941 the US was suddenly in desperate need of thousands of modern automatic weapons.
|
|
All of these firearms featured a solid-top receiver made of forged steel and incorporated side ejection of fired cartridges. Compared to the Winchester 94, then the predominant lever- action hunting rifle, the Model 36 was somewhat heavier with a simpler internal mechanism and a full pistol grip-type buttstock in contrast to the Winchester 94's straight grip stock. In 1948, the Model 36 was replaced by the Model 336, which incorporated the patents of Thomas R. Robinson, Jr., a Marlin employee. Sold under both the Marlin and Glenfield brands, the Model 336 has been in continuous production from 1948 to the present day, and is currently produced by Remington Firearms under the Marlin brand.
|
|
The quality of the gun is high, with the main functional components being made from firearms quality steel and the plastic parts (trigger, main receiver housings, buttstock, lower magazine cover) being made from firearms quality fiber reinforced polymers. The gun is manufactured by a company that also manufactures and designs military firearms (best known for their WWII production of the Tokarev TT-33 and M1895 Nagant revolver), and many of the parts are thus "over engineered" with military-style durability. The price of the Drozd is much higher than typical "department store" airguns, partly due to the use of the higher quality components and increased durability. The barrel is rifled steel and extremely thick and rugged for an airgun.
|
|
However, with the base in place, the rifle receiver will no longer fit the recess in the stock for storage. (The base is not needed on the Henry version and will not fit the Henry receiver.) Apart from the highly modified AR-7 Israeli survival rifles, most AR-7 models lack provision for a carry sling. AR-7 owners have adapted slings designed for use on guns without modification, such as universal shotgun slings designed to cup the shotgun buttstock at the rear and clamp to the barrel or magazine tube at the front. Given the light weight of the AR-7, 2.5 pounds, a proper length of parachute cord with a slip knot at either end can be used as a sling or lanyard.
|
|
It had a metal buttstock assembly that clamped to the backplate of the gun, and a front barrel bearing that incorporated both a muzzle booster and a bipod similar to that used on the BAR. A lighter barrel than that of the M1919A4 was fitted, and a carrying handle was attached to the barrel jacket to make it easier to carry. Previous M1919 designs could change the barrel, but it required essentially field stripping the gun to pull the barrel out from the rear - the pistol grip back plate, bolt group and the trigger group all had to be removed before the barrel could be replaced, and this put the gun out of action for minutes, and risked losing and damaging parts in the field.
|
|
A civilian semi-auto variant of the Chinese Type 56 assault rifle, the NHM-91 was built to imitate the appearance of the Russian RPK light machine gun. First imported and marketed in the United States in 1991 by ChinaSports Inc., NHM-91's were modified to meet the requirements of a 1989 Executive Order by President George H. W. Bush prohibiting importation of certain 'assault rifle' configurations of military- style semi-automatic rifles such as the Norinco AKM/AK-47. These modifications included a one-piece U.S.-made thumbhole stock to replace the separate Chinese-made buttstock and pistol grip of the original AKM/RPK rifle and the inclusion of a rivet on the receiver preventing use of standard AK-47, RPK, or AKM magazines.
|
|
As of 2012, the MR556A1 upper receiver group fits standard AR-15 lower receivers without modification, and functions reliably with standard STANAG magazines. HK-USA sells a variant under the MR556A1 Competition Model nomenclature; it comes with a 14.5" free-float Modular Rail System (MRS), 16.5" barrel, OSS compensator and Magpul CTR buttstock. The firearm's precision is specified as 1 MOA by Heckler & Koch. In Europe, the MR223A3 variant is sold with the same cosmetic and ergonomical improvements of the HK416A5. The French importer of Heckler & Koch in France, RUAG Defence, have announced that they are going to sell two civilian versions of the HK416F, named the MR223 F-S (14.5″ Standard version) and MR223 F-C (11″ Short version).
|
|
The weapon's rate-reducer mechanism, a delicately balanced spring-and-weight system described by one ordnance sergeant as a "Rube Goldberg device", came in for much criticism, often causing malfunctions when not regularly cleaned. The bipod and buttstock rest (monopod), which contributed so much to the M1918A2's accuracy when firing prone on the rifle range, proved far less valuable under actual field combat conditions. The stock rest was dropped from production in 1942, while the M1918A2's bipod and flash hider were often discarded by individual soldiers and Marines to save weight and improve portability, particularly in the Pacific Theater of war. With these modifications, the BAR effectively reverted to its original role as a portable, shoulder-fired automatic rifle.
|
|
Squad Designated Marksman Rifle on display at the Government Arsenal booth at the 23rd AFAD gun show. The Squad Designated Marksman Rifle (SDMR) is a mid-length carbine similar in configuration to the SEAL Recon Rifle that was developed upon request by the Army's Scout Rangers. It features a railed upper receiver, a mid-length gas system, a Daniel Defense 16-inch cold-hammer forged barrel, a Daniel Defense free-floating railed handguard, a 4x32 Trijicon Advanced Combat Optic, a Magpul STR buttstock, a Hogue grip containing a cleaning kit and a cerakote finish. An initial batch of forty (40) units of this carbine were turned over to selected AFP Special Operations Forces (SOF) and the Scout Rangers for testing and evaluation.
|
|
Swedish Prickskyttegevär 90 with accessories The AW is usually equipped with an integrated bipod and it also has a monopod mounted on the buttstock. Accuracy International accessories for the Arctic Warfare system include a selection of PM II series telescopic sights made by Schmidt & Bender with laser filters for the military scopes, aluminium one-piece telescopic sight mounting sets, MIL-STD-1913 rails (Picatinny rails), lens hoods, various optical and kill flash filters and lens covers for telescopic sights, auxiliary iron sights for emergency use, cleaning kits, muzzle brakes/flash- hiders and suppressors, butt plates and spacers to regulate the length of pull and butt angle to the requirements of the individual shooter, buttspikes, bipod (adapters), handstops, mirage bands, soft and heavy-duty transit cases and various maintenance tools.
|
|
In late 2018, the S&T; Motiv "Next-Generation LMG" was standardized as the K15, a heavily upgraded version of the K3 planned for fielding to the ROK Army by 2020. It has an adjustable buttstock and redesigned pistol grip/trigger group component for improved ergonomics, and internal parts are reconfigured and manufactured with closer tolerances for better reliability. Unlike the K3, it uses a push button to hold and release the barrel with three upper positioning lugs to ensure the barrel sits on a correct position when reattached. The feed cover and handguard have rails integrally attached, rather than needing an adapter to have them installed like the K3; this helps it to utilize a day/night fire control system that uses a thermal sight, laser rangefinder and ballistic computer.
|
|
Other nations, including Kuwait and Venezuela have shown interest in acquiring the rifle. On 12 May 2009, the Croatian Minister of Defence Branko Vukelić confirmed the positive end of a torture test over the rifle and on 15 May officially signed a contract with HS Produkt for the acquisition of 20,000 rifle kits (both versions) for a medium price of 14,503 Croatian kunas each (as of December 8, 2018, approximately 2233.70 USD or 1961.52 EUR). A new and improved version of the VHS rifle, known as the VHS-2, was introduced in April 2013. It introduced a new, more conventional fire selector, a redesigned carrying handle, an adjustable-length buttstock, and an ambidextrous cartridge casings ejection system that can be configured for either right or left side ejection in less than a minute.
|
|
The OVP was little more than the barrel and action of the VP attached to a wooden buttstock and provided with a trigger and some small refinements. Although formally classed as a delayed blowback, the delay is minimal and certainly had little practical effect as seen by the high rate of fire. The mechanism is the usual one of bolt and return spring, but the bolt is controlled by a track in the receiver body that causes the bolt to rotate 45 degrees as it closes. The striker carries a lug bearing on the receiver track that also bears on a cam face on the bolt, so that the firing pin, driven by the return spring, cannot go forward to fire the cartridge until the bolt has rotated.
|
|
These include an improved bipod, 100– and 200–round fabric "soft pack" magazines (to replace the original plastic ammunition boxes), and Picatinny rails for the feed tray cover and forearm so that optics and other accessories may be added. M145 Machine Gun Optic, October 2005, Koshk Kowl, Afghanistan ;M249 Paratrooper :The M249 Paratrooper, often called "Para", is a compact version of the gun with a shorter barrel and sliding aluminum buttstock based on that of the Minimi Para, so-called because of its intended use by airborne troops. It is much shorter and considerably lighter than the regular M249 at long and in weight. A Ranger with 2nd Battalion, 75th Ranger Regiment armed with a Mk 46 machine gun provides overwatch security on an objective during a mission in Iraq, November 2006.
|
|
M4 Carbine Colt was the original producer of the M16 rifle, rights to which it purchased from designer ArmaLite, and today offers a complete "Family of Weapons" based around the derivative M4 Carbine, which includes a heavy barreled rifle (HBAR), a carbine with sliding stock (M4 & ACC-M), a personal defense weapon with folding-collapsible buttstock (SCW), a piston carbine (APC), a Commando M4 with a 10.5 in. (26.7 cm) barrel, an infantry automatic rifle (IARTM), a submachine gun chambered for 9mm ammunition, and the 40mm M203 grenade launcher. In July 2012 the U.S. Marine Corps awarded Colt a five-year, Indefinite Delivery/Indefinite Quantity contract for up to 12,000 M-45 MEUSOC Close Quarter Battle Pistols (CQBP) based on the current embodiment of the M1911 pistol design.
|
|
This is because the receiver and butt diverge in alignment from the axis of the barrel by several degrees, making the weapon compact as its bolt recoils inside a tube running through the buttstock, while also enabling a lighter bolt to be used by providing mechanical disadvantage to the pressure from the expanding propellant gases. To allow a natural aiming stance, the butt had to drop while the receiver had to remain in alignment. This required that the bolt approach the breech at an angle and the face of the bolt was cut obliquely to allow it to close evenly on the cartridge. The MAS-38 also features an unusual safety catch: the bolt was locked (in either the forward or rear position) by pushing the trigger forward.
|
|
The buttstock is made from metal and has an adjustable shoulder pad for comfortable aiming and minimizing the effects of recoil on the operator. It is also adjustable for the length of pull and height, and in case of the folding stock variant can be folded to the left side of the receiver to reduce the overall dimensions of the rifle and make it more portable. An adjustable rear folding ground spike under the stock helps to keep the rifle in a stable position for extended periods of time and is most effective when coupled with the folding bipod support under the rifle barrel. A pistol grip is used for comfortable wielding of the weapon, especially during prolonged periods of time during which the operator must be immediately ready to open fire.
|
|
As the rifled musket replaced the smoothbore firearms for infantry in the mid 19th century, carbine versions were also developed; this was often developed separately from the infantry rifles and, in many cases, did not even use the same ammunition, which made for supply difficulties. A notable weapon developed towards the end of the American Civil War by the Union was the Spencer carbine, one of the first breechloading, repeating weapons. It had a spring-powered, removable tube magazine in the buttstock which held seven rounds and could be reloaded by inserting spare tubes. It was intended to give the cavalry a replacement weapon which could be fired from horseback without the need for awkward reloading after each shot – although it saw service mostly with dismounted troopers, as was typical of cavalry weapons during that war.
|
|
The Stechkin automatic pistol or APS (Avtomaticheskiy Pistolet Stechkina = Автоматический Пистолет Стечкина) is a Soviet selective fire machine pistol chambered in 9×18mm Makarov and 9x19mm Parabellum introduced into service in 1951 for use with artillery and mortar crews, tank crews and aircraft personnel, where a cumbersome assault rifle was deemed unnecessary. Seeing service in a number of wars such as the Vietnam war, War in Donbass, and Syrian Civil War. The APS was praised for its innovative concept and good controllability for its size. However, the high cost of the weapon, complex and time-consuming machining, combined with a limited effective range, large size and weight for a pistol, and fragile buttstock have been mentioned as a reason to phase it out of active service in favour of an Assault rifle such as the AKS-74U.
|
|
The APS was praised for its innovative concept and good controllability for its size. However, the high cost of the weapon, complex and time-consuming machining, combined with a limited effective range, large size and weight for a pistol, fragile buttstock, frequent stoppages and subpar ergonomics, led to the APS being gradually phased out of active service. However, the weapon found a new niche among special forces such as the Spetsnaz or FSB, who needed a more effective sidearm than the Makarov PM. The Stechkin APS was eventually replaced by the AKS-74U compact assault rifle in 1981, offering more firepower due to its much more powerful 5.45×39mm M74 rifle ammunition, acceptable accuracy at moderate distances, and greater magazine capacity. A contemporary derivative of the Stechkin, the OTS-33 Pernach, is also chambered for the 9×18mm Makarov cartridge.
|
|
An M240B in use by a U.S. Army soldier The M240B (formerly called as the M240E4) is the standard infantry medium machine gun of the U.S. Marine Corps. The US Navy and Coast Guard likewise utilize the weapon system, and is also still used by some units in the US Army. It comes configured for ground combat with a buttstock and bipod, though it can also be mounted on tripod, ground vehicles, aircraft, aboard ships and small boats. It is almost always referred to as the "M240 Bravo" or just "240" verbally. The M60E4 (Mk 43 as designated by the U.S. Navy) was pitted against the M240E4 (former designation of the M240B) in the US Army trials during the 1990s for a new infantry medium machine gun, in a competition to replace the decades-old M60s.
|
|
The Beretta ARX100 is a semi-automatic only variant of the ARX160 that is intended for the civilian market. It is chambered in 5.56×45mm NATO/.223 Remington cartridge. It features a Picatinny rail on the top of the receiver for mounting various optics, on both sides of the hand guard for mounting various accessories and on the bottom of the handguard for mounting various grips, a quick change barrel, a barrel length of 16-inch, a folding back-up iron sights, ambidextrous fire/safety selector, magazine release, bolt release and charging handle, a case ejector that can eject the empty brass either to the right side or left side by pressing on the case ejection selector with a tip of a 5.56×45mm NATO/.223 Remington cartridge, and a telescopic folding buttstock that is also adjustable for length of pull.
|
|
If the buttstock of a loaded gun was given a hard knock while the bolt was fully forward, the gun could accidentally fire because of the bolt overcoming the action spring resistance and moving rearward enough to pick up a round, chamber it and fire. Soldiers liked to leave the bolt of their firearm in this closed or forward position, so dirt and debris would not enter the barrel and chamber. This 'Bolt-closure' practice acted as a dust cover for the weapon's chamber, preventing a malfunction from occurring because of the presence of foreign debris, but making accidental discharge more likely. post World War I MP 18 with universal safety The German police asked for an external safety on their MP 18s, and a universal bolt-locking safety was added on all the submachine guns used by the police.
|
|
GP-25 grenade launcher attached to AK-74 assault rifle M16A1 with a practice round Since grenade launchers require relatively low internal pressure and only a short barrel, a lightweight launcher can be mounted under the barrel of a traditional rifle; this type of device is referred to as an under-barrel grenade launcher (UBGL).Acronym finder - UBGL, TheFreeDictionary 40 mm ARSENAL Underbarrel Grenade Launcher UBGL-1 , ARSENAL Ltd, Kazanlak, Bulgaria This reduces the weight the soldier must carry by eliminating the grenade launcher's buttstock and makes the grenade launcher available for use at a moment's notice. Underbarrel 40mm grenade launchers generally have their own trigger group; to fire, one simply changes grips, disengages the safety, and pulls the trigger. In Western systems, the barrel slides forward or pivots to the side to allow reloading; most fire a 40×46mm grenade cartridge.
|
|
National Park Service photo of the Forgotten Winchester rifle leaning against the tree where it was discovered in 2014 The Forgotten Winchester is a Winchester Model 1873 rifle that archaeologists discovered in 2014 leaning against a juniper tree in Great Basin National Park in Nevada. The gun was manufactured in 1882, but nothing is known of its abandonment. The bottom of its stock was buried in 4-5 inches of accumulated soil and vegetation, and a round of ammunition stored in its buttstock dated between 1887 and 1911, indicating that it had been resting there for many years. A post about the weathered gun on the park's Facebook page captured the public's imagination and went viral because of the mystery of who left the gun propped against the tree and why they never returned for it.
|
|
The Winchester Hotchkiss was a bolt-action repeating rifle patented by Benjamin B. Hotchkiss in 1876 and produced by the Winchester Repeating Arms Company and Springfield Armory from 1878. The Hotchkiss, like most early bolt- actions, had a single rear locking lug integral with the bolt handle, but was unique in feeding multiple rounds from a tubular buttstock magazine similar to the Spencer rifle. The .45-70 Hotchkiss was acquired in limited numbers by the US Navy as the M1879, and (in a slightly modified version) by the US Army and several state militias as the M1883, making it the first center-fire bolt- action repeater to be adopted by any major military (the distinction of first bolt-action repeating rifle to be issued in great numbers as a standard military arm was the Swiss Vetterli 1869, which utilized very large rim-fire metallic cartridges).
|
|
This, along with the M37 and the Browning M2 machine gun, was the most common secondary armament during World War II for the Allies. The coaxial M37 variant had the ability to feed from either the left or the right of the weapon, and featured an extended charging handle similar to those on the M1919A4E1 and A5. A trial variant fitted with special sighting equipment was designated M37F. Another version of the M1919A4, the M1919A6, was an attempt to make the weapon into a true light machine gun by attaching a bipod, buttstock, carrying handle, and lighter barrel (4 lb (1.8 kg) instead of 7 lb (3.2 kg)). The M1919A6 was in fact heavier than the M1919A4 without its tripod, at 32 lb (15 kg), though its bipod made for faster deployment and enabled the machine gun team to dispense with one man (the tripod bearer).
|
|
The RPK-16 is chambered in 5.45×39mm cartridge and uses a Picatinny rail mounted detachable bipod instead of the fixed bipod of the RPK-74. It features the traditional Kalashnikov gas-operated long- stroke piston system, a detachable suppressor, a Picatinny rail on the top of its receiver for mounting various optics/scopes and on the bottom of the handguard for bipod mounting, an ergonomic pistol grip and a folding buttstock and two main barrel lengths; a long barrel (when it is applied or configured for the light machine gun role) and a short barrel (when it is applied or configured for the assault rifle role). Its design enables it to have an interchangeable barrels, that can easily be removed. It has a combat weight of , a full length of , a cyclic rate of fire of 700 rounds per minute (RPM), an accuracy range of and uses a standard 96-round drum magazine.
|
|
The M16 rifle, officially designated Rifle, Caliber 5.56 mm, M16, is a family of military rifles adapted from the ArmaLite AR-15 rifle for the United States military. The original M16 rifle was a 5.56mm automatic rifle with a 20-round magazine. In 1964, the M16 entered US military service and the following year was deployed for jungle warfare operations during the Vietnam War. In 1969, the M16A1 replaced the M14 rifle to become the US military's standard service rifle.Urdang, p. 801. The M16A1 improvements include a bolt-assist, chrome- plated bore and a 30-round magazine. In 1983, the US Marine Corps adopted the M16A2 rifle and the US Army adopted it in 1986. The M16A2 fires the improved 5.56×45mm NATO (M855/SS109) cartridge and has a newer adjustable rear sight, case deflector, heavy barrel, improved handguard, pistol grip and buttstock, as well as a semi-auto and three-round burst fire selector.
|
|
Army Plans to Field H&K; G28 as New Squad Marksman Rifle . Military.com/Kitup. 6 March 2018. The M110A1-based rifle will replace the M14 EBR, in use by the Army since 2009, but because it was based on an operational needs statement it had to be turned in by units at the end of a combat deployment. Unlike the sniper configuration, the SDMR model will be equipped with a different buttstock and barrel twist than the CSASS model. The marksman version is fitted with a simpler SIG TANGO6 1-6×24 telescopic sight to make quick adjustments between , and it fires M80A1 Enhanced Performance Rounds or XM1158 Advanced Armor Piercing Rounds rather than sniper rounds; it will be fielded with a suppressor to make the marksman less identifiable with louder 7.62×51mm NATO rounds. The SDMR TANGO6 1-6×24 telescopic sight features a red horseshoedot for fast aiming and an illuminated Extended Range Bullet Drop Compensation (BDC) illuminated front focal plane reticle.
|
|
The Model 336Y also featured a short buttstock to enable use by younger shooters. The Glenfield For many years, Marlin produced a less-expensive Glenfield line of Model 336 rifles for retail at mass merchandise and department stores including: J.C. Penney, Sears Roebuck & Company, Western Auto, K-Mart and Wal-Mart. Marlin sold these rifles as the Glenfield Models 30, 30A, 30AS or 30AW. Other Model 336 production rifles were stamped with names chosen by the retailer, such as the J.C. Higgins (Sears) Model 45 and Model 50, the Montgomery Ward Western Field Model 740-A EMN, the J.C. Penney Foremost Model 3040, the K-Mart Model 30TK and the Model 3000 for Big 5 Sporting Goods. Mechanically identical to the Model 336, these mass market rifles were typically fitted with lower-cost hardwood (birch) stocks and forearms, and some metal finishing operations were eliminated in the interest of lowering unit cost.
|
|
In April 2011, the U.S. Army issued a request to the private sector to reconfigure or replace the current Knight Armament M110 sniper rifle as the current version of the M110 was not functioning well in the field requiring significant maintenance and replacement of parts. The U.S. Army responded to the referenced article clarifying that the rifle was functioning perfectly and they are just looking for a smaller, lighter version of M110 for the spotter in a sniper team, providing the sniper is equipped with the new XM2010. "The spotter will have an urban sniper support weapon which will be the M110. … Now you've increased the lethality of the team…"—Program Manager LTC Chris Lehner.Army Speaks to M110 Performance/Upgrade The specifications the U.S. Army has issued are as follows: # Operation: Semi-automatic # Caliber: Compatible with 7.62×51mm NATO cartridges # Accuracy: Capable of 1.3 minute of angle dispersion or better with match ammunition # Size: Overall length shall be reduced using a shorter barrel and/or collapsible buttstock.
|
|
Stripped AR-10 Close-up of stripped AR-10 barrel and DI gas system The AR-10 is a lightweight, air-cooled, magazine-fed, gas-operated rifle that uses a piston within the bolt carrier with a rotary bolt locking mechanism. The rifle has a conventional layout; it features an in-line stock, an aluminum alloy receiver and a fiberglass reinforced pistol grip, handguard, and buttstock. While mostly an original design, the AR-10 built upon previously proven concepts. From the FAL it took the hinged receiver system allowing the rifle to be opened for cleaning much like a break-action shotgun. The ejection port cover is similar to that found on the German World War II-era StG44. The bolt locking mechanism is similar to the M1941 Johnson rifle (itself an adaptation of the Browning-designed Remington Model 8 bolt). From the German MG 13 light machine gun, FG 42 and M1941 Johnson machine gun came the idea of the straight-line stock layout. A "straight-line" recoil configuration increases controllability during burst or automatic fire by reducing muzzle climb.
|
|
The receiver of the M70 is 1.5 mm thick, compared to the 1 mm thick receiver of the AKM, making it more rigid. The receiver has a bulge at the front to accommodate an enlarged trunnion similar to a RPK receiver, with the front trunnion rivet configuration likewise resembling a RPK and not an AKM. Much like the other AKs, the M70 experienced changes to other parts between the milled and stamped variants, such as moving the gas relief ports from the tube to the gas block, adding lightening cuts on the bolt and bolt carrier, moving the rear sling swivel from the back of the receiver to the buttstock and omission of the metal ferrules from the lower handguards and pistol grips. It however, like the Type 56, retained many milled features, such as the thicker barrel, front sight shape, bolt and bolt carrier "in the white", smooth dust cover, lack of a pistol grip reinforcement plate on underfolders, forward sling loop on the gas block and blued finish.
|
|
The line between ranged and melee weapons is not entirely definite; for instance, spears, axes, knives and daggers can be used for both throwing and striking, depending on purpose and situation, and a ranged weapon can also be used as a melee weapon in close encounters, such as a rifle being used for melee with its buttstock and a fixed bayonet, a handgun used used as an improvised hammer and even an arrow being used for stabbing (as an improvised shiv) in desperate situations. Early ranged weapons often included specifically designed hand-thrown weapons such as javelins, slings and darts, as well as more complex elastic weapons such as slingshots and bows; and siege engines like stone throwers, catapults, ballistas and trebuchets. These ranged weapons were extremely effective in combat, especially when used en masse, as they gave the wielder opportunity to launch multiple rounds of attack before an enemy armed with melee weapons or shorter- ranged missile weapons could even get close enough to pose a threat. After the invention of gunpowder and the development of firearms, gun-type pneumatic ranged weapons became the dominant weapon of choice in armed conflicts, even in close combat.
|
|
In 1991 the Izhmash factory in the city of Izhevsk began full- scale production of a modernised variant of the AK-74—the AK-74M ("М"—) assault rifle that offers more versatility compared with its predecessor. Apart from several minor improvements, such as a lightened bolt and carrier assembly to reduce the impulse of the gas piston and bolt carrier during firing, the rifle features a new glass-filled polyamide stock that retains the shape of the original AK-74 fixed laminated wood stock, but side-folds to the left like the skeletonised AKS-74 buttstock. As a result, pistol grip reinforcement plates that were once exclusively used on the folding stock variants are standard on all AK-74Ms. Additionally the AK-74M features an improved muzzle device with extended collar and threads to reduce play and a machine cut beneath to allow easier cleaning rod removal, a reinforced smooth dust cover and a redesigned guide rod return spring retainer that allows firing the GP-25, GP-30 and GP-34 underslung grenade launchers without having to use the previously necessary additional receiver cover fastener.
|
|
The M60's operating system of an operating rod turning a rotating bolt was inspired by the FG 42, which was based on the much earlier Lewis Gun. The M60 was even constructed with a secondary assisting firing pin spring that is used in the FG 42 in semi-automatic mode even though it is actually unnecessary in the M60, which operates only in full automatic mode. The M60's gas operation is unique, and drew on technical advances of the period, particularly the White "gas expansion and cutoff" principle also exploited by the M14 rifle. The M60's gas system was simpler than other gas systems and easier to clean. The M60 was designed for mass production, like the MG42 it was based on. While the M1919 required much machining for its large, recoil-operated internal mechanisms, the M60's stamped sheet receiver had a gas-operated, carrier- cammed bolt mechanism; the same type of mechanism was used on the Lewis machine gun. The straight-line layout allowed the operating rod and buffer to run directly back into the buttstock and reduce the overall length of the weapon. Mobile Inshore Underwater Warfare Site (MIUW) at Guantánamo Bay, Cuba in 2003.
|
|
In the case of the G3, the Dutch firm Nederlandse Wapen en Munitiefabriek (NWM) held production and sales rights to the CETME design outside of Spain. To acquire production rights, the West German government offered NWM contracts to supply the German Air Force (Luftwaffe) with 20mm ammunition. Production of the G3 was then assigned to Rheinmetall and H&K.; The latter company already had ties to CETME, and had worked to further optimize the CETME rifle for use with the full-power 7.62×51mm NATO cartridge (as opposed to the downgraded CETME variant). In 1969, Rheinmetall gave up production rights to the G3 in exchange for H&K;'s promise not to bid on MG 3 machine gun production. Later in 1977, the West German government ceded ownership of G3 production and sales rights exclusively to Heckler & Koch. Initial production G3 rifles differed substantially from more recent models; early rifles featured closed-type mechanical flip-up sights (with two apertures), a lightweight folding bipod, a stamped sheet steel handguard, a wooden buttstock (in fixed stock models) or a telescopic metal stock. Before delivery to the Bundeswehr, each G3 went through functional checks, zeroing the sight line and a shooting test at the factory.
|
|
The ArmaLite brand was purchased in 1996 by Eagle Arms, a U.S. small arms manufacturer, who adopted the ArmaLite brand for their company. An updated model of the AR-180 was introduced in 2001 as the AR-180B, with a molded polymer lower receiver replacing the stamped steel original. The new lower receiver is combined with the buttstock, which is fixed on the AR-180B, instead of the side-folding butt on the original AR-18 and AR-180. Other AR-180B changes include the use of standard AR-15 trigger group and rear sight parts, a straight cocking handle replacing the earlier cranked style and the deletion of the original AR-18/180 spring-loaded dust cover for the cocking handle slot. The AR-15 magazine release is also used, in contrast to the original AR-18 which had a different magazine release and corresponding slot in the body of the magazine, meaning AR-15 magazines needed a new slot cut to fit properly in the AR-18. As a result, the AR-180B uses standard AR-15/M16 magazines. An AR-180B version with a Picatinny rail was planned for production. In 2007 the AR-180B was discontinued due to poor sales. There are aftermarket parts to improve the AR-180B.
|
|