87 Sentences With "be positioned at" | Random Sentence Generator

He seemed to be positioned at the portal, bathed in prehistoric memories.

The rat is to be positioned at a not-yet-disclosed location on Monday.

And a mobile trailer will be positioned at Lucy's feet to satisfy guests' toiletry needs.

By sending robots in to engage and destroy enemy tanks, human troops can be positioned at distances beyond enemy counter fire.

It's been quite a journey for the spacesuit-clad dummy who should still be positioned at the wheel of the spacefaring Roadster.

The boys would be led to safety by a team of expert divers who would be positioned at strategic points along the route.

The back of the keyboard, which is also a protective folio-style case, can be positioned at two angles via magnets in the back.

By then, U.S. Soccer hopes, Berhalter and his players will be positioned at last to try to return the country to soccer's biggest stage.

"The time line is to cater to situations where aircraft can be positioned at maintenance facilities & international flights can reach their destinations," the ministry said in a tweet.

Reuters was also the first to report that Kim would travel to Vietnam by train, allowing cameras to be positioned at strategic spots at the border station of Dong Dang.

The wire will be positioned at 235-feet (72-meters) high on one building and 259-feet (79-meters) high on the other, and dips 50 feet (15 meters), organizers said.

The team knew that when the AI system — known as Dactyl — was controlling a real robot hand, the base of the hand might not be positioned at the same angle each time.

For the first time, he said, workers at certain stations will be positioned at two levels - some in pits and some on platforms - to install parts on upper and lower sections of a vehicle in unison.

Trained guards should be positioned at all public buildings, places of worship, hospitals, campaign rallies, sporting events, restaurants, amusement parks and major hotels It would save time to employ unemployed vets with combat experience in the Middle East.

On Tuesday, representatives from the Homeland Security Department, FBI, National Security Agency and U.S. Cyber Command will be positioned at the Cybersecurity Infrastructure Security Agency facility to rapidly respond to any attacks on presidential primaries scheduled in 14 states.

"Therefore the European government bonds trading platform currently based in London will be relocated, as of September 2017, to Credit Agricole CIB in Paris where it will be positioned at the heart of our euro swaps, repo and inflation focused activities," she said.

Twin Peaks itself is a dying industrial town — a logging town, no less — that just happens to be positioned at the center of some massive supernatural battle between good and evil, where evil is represented as pointless destruction and good is represented as simple, gentle kindness.

Canopy Growth's investment in the Southern Tier "is a true win-win for Canopy Growth, who will be positioned at the forefront of Upstate New York's industrial hemp revolution, and for the Southern Tier's economy and farmers, which will receive a major shot in the arm in new good-paying jobs," Schumer said in the release.

In superconductivity, the Lockin effect refers to the preference of vortex phases to be positioned at certain points within cells of a crystal lattice of an organic superconductor.

The first EDRS payload, EDRS-A, comprising a laser communication terminal and a Ka band inter-satellite link, was placed on-board Eutelsat commercial telecommunication satellite, called Eutelsat 9B (COSPAR 2016-005A). The satellite was launched in January 2016 by a Proton-M rocket and will be positioned at 9°E.ILS to Launch Eutelsat 9B Satellite in 2015 A second EDRS payload was launched aboard a dedicated spacecraft. The EDRS-C (COSPAR 2019-049A), which is also carrying a laser communication terminal, was launched on 6 August 2019 and will be positioned at 31°E.

During 1997, even before the launch of their first satellites (Yamal 101 and Yamal 102), Gazkom was planning the second generation. At that time they planned a 24 satellites of the second generation. This extremely aggressive plan was scaled back by 2001 with a plan to launch four 200 series satellites. The first two, Yamal 201 and Yamal 202 would be launched by 2001 and the second pair, Yamal 203 and Yamal 204 by 2004. Yamal 201 and Yamal 203 would be identical and be positioned at the 90°E slot and Yamal 202 and Yamal 204 would also be twins and be positioned at the 49°E slot.

Lagrange is a 2018 concept study for a solar weather mission by the European Space Agency (ESA). This is a British-led concept that envisions two spacecraft to be positioned at Lagrangian points L1 and L5. Design call for 'solar sentinel' mission. Jonathan Amos, BBC News. 2 February 2018.

Routledge, Table LII, p. 331; pp. 334–5. To prevent downed V-1s falling in the city and dock area, the guns had to be positioned at least 10 miles outside the city, integrated into a system of warning stations and observation posts, supported by radar and searchlights.

Yamal 201 and Yamal 203 were identical and be positioned at the 90° E slot and Yamal 202 and Yamal 204 were also twinned and be positioned at the 49° E slot. Yamal 101 and Yamal 102 were launched together on 6 September 1999 at 16:36 UTC from Baikonur Site 81/23 by a Proton-K/Blok-DM-2M directly to GEO. But a failure in the electrical system at solar panel deployment meant that Yamal 101 was lost right after the successful launch. Thus, Gazkom registered Yamal 102 as Yamal 101. This has caused significant confusion but the records are clear that the satellite that failed was, in fact, the original Yamal 101.

This allows the lens to be positioned at a greater distance from the illuminated film and allows an acceptable sized image with the projector some distance from the screen. It also permits the lens to be mounted in a relatively coarsely threaded focusing mount so that the projectionist can quickly correct any focusing errors.

A ring-stand rod and clamp are inserted into two jaws of a clamp holder and adjustable thumbscrews fasten the clamp holder to the attachments and lock it in place. The attachments can be secured with the thumbscrews to be positioned at any height or angle, with a regular clamp holder positioning the apparatus at a 90° angle.

In a rifle cartridge case like the .308 Winchester, the TDCC M = 25.00 value denotes the transducer must be positioned at a distance of from the breech face..308 Wincheste C.I.P. TDCC datasheet In a relatively short pistol cartridge case like the 9×19mm Parabellum (9mm Luger in C.I.P. nomenclature), the TDCC M = 12.50 value denotes the transducer must be positioned at a distance of from the breech face.9×19mm Parabellum/9mm Luger C.I.P. TDCC datasheet Some have incorrectly concluded that C.I.P. measures pressure at the case mouth to account for the variations from SAAMI pressure. As transducer C.I.P. almost exclusively uses one type of Piezoelectric sensor (named "channel sensor") made by the Swiss company Kistler that requires drilling of the cartridge case before firing the proofing cartridge in a specially made test barrel.

Chain track drive sprocket (Leclerc battle tank, 2006) In the case of vehicles with caterpillar tracks the engine-driven toothed-wheel transmitting motion to the tracks is known as the drive sprocket and may be positioned at the front or back of the vehicle, or in some cases both. There may also be a third sprocket, elevated, driving the track.

SpaceX to Try Rocket Landing During Satellite Launch Friday: Watch Live Space.Com. 1 March 2016. Accessed 30 March 2016 The satellite used electric propulsion to reach geostationary orbit and will be positioned at 108.2° East to provide 81 Ku-band transponder equivalents for pay-TV, data and mobility across Northeast Asia and South Asia, and Indonesia.SES-9 Mission Space-X.

During 1997, even before the launch of their first satellites (Yamal 101 and Yamal 102), Gazkom was planning the second generation. At that time they planned a 24 satellites of the second generation. This extremely aggressive plan was scaled back by 2001 with a plan to launch four 200 series satellites. The first two, Yamal 201 and Yamal 202 would be launched by 2001 and the second pair, Yamal 203 and Yamal 204 by 2004. Yamal 201 and Yamal 203 would be identical and be positioned at the 90°E slot and Yamal 202 and Yamal 204 would also be twins and be positioned at the 49°E slot. Yamal 201 was launched along Yamal 202 November 24, 2003 at 16:2 UTC from Baikonur Site 81/23 by a Proton-K/Blok-DM-2M directly to GEO.

Dextre resembles a gigantic torso fitted with two extremely agile, arms. Total mass is about . The 3.5-metre-long body pivots at the "waist". The body has a Power Data grapple fixture at the 'head' end that can be grasped by the larger Space Station Arm, Canadarm2 so that Dextre can be positioned at the various Orbital Replacement Unit (ORU) worksites around the Space Station.

Water bottles in cages must be positioned at a height which the hamster can reach without stretching. Hamsters hoard their food, and will carry it from where they find it to a hiding place. They seem to not care whether their food is served in a dish or placed on their floor. Uneaten fresh vegetables should be removed after a day or so to prevent rotting.

Examples include acousto-optic modulators for cavity dumping and vacuum spatial filters for transverse mode control. For some low power lasers, the laser gain medium itself may be positioned at a beam waist. Other elements, such as filters, prisms and diffraction gratings often need large quasi-collimated beams. These designs allow compensation of the cavity beam's astigmatism, which is produced by Brewster-cut elements in the cavity.

Brooke Street Pier shortly after being towed into location in November 2014 Construction started in April 2014 at Incat, a ferry manufacturer based at Prince of Wales Bay. In November 2014 the partially completed structure, then weighing , was towed down the river to be positioned at its final location. It is anchored to the sea-bed by cables. The structure is long by wide and is four levels tall.

The offensive team must have seven players on the line of scrimmage at the start of a play. Those players may be positioned at any place along the line of scrimmage (which extends all of the way across the playing field). The defensive team may position as many as 11 players on the line of scrimmage. Usually, there are from 3 to 8 defensive players on the line of scrimmage.

Shepherd was describe as "heavy, strong, sawed-off (5′9″) running back who could be positioned at tailback or fullback alternately (and was a) productive pro passer." Shepherd was also known as being a great defensive player being "part of a vigorous defensive unit that shut out eight of its nine opponents, including all of the major foes: Villanova, Boston College, Catholic U, Georgetown and Bucknell.Purcell, Mark. "Unknown All-Starr.

Web The juncture can involve either the entire diameter of the head or any portion of the head and can be positioned at a multitude of rotational angles. In fact, craniopagus twins are rarely found in a symmetrical union. Apart from this, the vertebral axes may have a straight line. Despite this, the angle of the vertebrae is the ultimate dictator in how the individuals heads actually face.

After launch, the satellite separated from the carrier rocket into a geosynchronous transfer orbit. It will subsequently raise itself into geostationary orbit by means of its onboard propulsion system. It will be positioned at 111° West longitude, and is expected to operate for 15 years. A second satellite, TerreStar-2 (now EchoStar XXI), is currently under construction and will be used as a ground spare per the Federal Communications Commission guidelines.

Artist's conception of the MROI array The Magdalena Ridge Optical Interferometer (MROI) is an optical and near infrared interferometer under construction at MRO. When the MROI is completed, it will have ten telescopes located on three arms. Each arm will have nine stations where the telescopes can be positioned, and one telescope can be positioned at the center. The telescopes and their enclosures will be moved with a customized crane.

The presence of this breastwork allowed the ship to operate without fear of being flooded by waves breaking over the deck, and allowed the main armament to be positioned at a greater height than in the American monitors, gaining thereby greater command and range, while preserving the defensive advantage of low freeboard. Reed's concept was copied by other designers and breastwork monitors served in the French and Imperial Russian Navies, among others.

Routledge, Table LII, p. 331; pp. 334–5. To prevent V-1s falling in the city and dock area, the guns had to be positioned at least 10 miles outside the city, integrated into a system ('Antwerp X') of warning stations and observation posts, supported by radar and searchlights. 114th LAA Regiment provided some of the personnel and equipment for No 2 Local Warning (Radar) Troop formed by 80 AA Bde for this purpose.

When a traveller would come by at the Kellys' tavern, they would first ascertain if they were wealthy. If confirmed, either William or Bill, or sometimes Kit, would engage the client in conversation, while Kate prepared the meal. The victim's chair would always be positioned at the trap door, and when a signal was given, the door would spring open, with the victim either dying from the fall or being disposed off later on with the axe.

ARToolKit download statistics. In order to create strong augmented reality, it uses video tracking capabilities that calculate the real camera position and orientation relative to square physical markers or natural feature markers in real time. Once the real camera position is known a virtual camera can be positioned at the same point and 3D computer graphics models drawn exactly overlaid on the real marker. So ARToolKit solves two of the key problems in Augmented Reality; viewpoint tracking and virtual object interaction.

Ideally, the secondaries would be positioned at the vertices of an equilateral triangle with the master at the centre. The baseline length, that is, the master-secondary distance, was typically . Each station transmitted a continuous wave signal that, by comparing the phase difference of the signals from the master and one of the secondaries, resulted in a set of hyperbolic lines of position called a pattern. As there were three secondaries there were three patterns, termed Red, Green and Purple.

In December 1995, JSAT ordered its fourth satellite from Hughes, and second of the HS-601 platform, the JCSAT-4. It was an almost copy of the JCSAT-3, also based on the HS-601, but with more powerful transponders. It would have a mixed Ku band and C band payload, a power generation capability of 5,000 Watts and a 12 year of design life. It was expected to be delivered by early 1997 and be positioned at the 124°East longitude.

Different mission durations and their velocity requirements were explored with respect to the launch date, assuming direct impulsive transfer to the intercept trajectory. The Comet Interceptor spacecraft by ESA and JAXA, planned to launch in 2028, will be positioned at the Sun-Earth L2 point to wait for a suitable long-period comet to intercept and flyby for study. In case that no suitable comet is identified during its 3-year wait, the spacecraft could be tasked to intercept an interstellar object in short notice, if reachable.

A motorized miter saw A miter saw or mitre saw is a saw used to make accurate crosscuts and miters in a workpiece by positioning a mounted blade onto a board. A miter saw in its earliest form was composed of a back saw in a miter box, but in modern implementation consists of a powered circular saw that can be positioned at a variety of angles and lowered onto a board positioned against a backstop. Powered miter saws are also commonly referred to as chop saws.

The battery was set back by delays and funding problems, and was not completed until 1864. With the imminent withdrawal of British forces due in 1870, a major review of defences had been carried out in 1868. It was decided the current system was inadequate to cope with advances in naval ordnance, and two new forts would be positioned at One Tree Point and Bellerive Bluff. The Queen's Battery was to assume the apex position of a triangular coverage of the entrance to Sullivans Cove.

Co-located satellites cannot actually be positioned at the same point on the geostationary satellite arc. In fact, they are just close enough together to appear to be at the same position so far as the beamwidth of the receiving dish is concerned. SES maintains its co-located satellites within an imaginary 150 km cube in space, centred on the notional orbital position. All geostationary satellites are influenced by gravity of the Earth, the Moon and the Sun, and tend to drift from their initial orbital position.

Under C.I.P. proof test standards a drilled case is used and the piezo measuring device (transducer) will be positioned at a distance of 25 mm from the breech face when the length of the cartridge case permits that, including limits. When the length of the cartridge case is too short, pressure measurement will take place at a cartridge specific defined shorter distance from the breech face depending on the dimensions of the case. The difference in the location of the pressure measurement gives different results than the C.I.P. standard.

The device features two Pentile OLED displays, 1080×1200 resolution per eye, a 90 Hz refresh rate, and a 110° field of view. The separation of the lenses is adjustable by a slider on the bottom of the device, in order to accommodate a wide range of interpupillary distances. The fresnel lenses are not interchangeable; however, there are multiple facial interfaces so that the device can be positioned at different distances from the user's eyes. This also allows for users wearing glasses to use the Rift, as well as users with widely varying facial shapes.

These engines possess roughly twice the horsepower of the similarly sized AgustaWestland AW169 helicopter. Both of the engine and proprotor pairs are mounted on a load-bearing rotatable pylon at the wing's ends, allowing the proprotors to be positioned at various angles. In helicopter mode, the proprotors can be positioned between a 75- and 95-degree angle from the horizontal, with 87 degrees being the typical selection for hovering vertically. In airplane mode, the proprotors are rotated forward and locked in position at a zero-degree angle, spinning at 84% RPM.

Linebackers in the 3–4 base defense In a 3–4 defense, four linebackers (LBs) are positioned behind the defensive line. The linebacker unit is made up of two inside linebackers (ILBs) flanked by two outside linebackers (OLBs). The OLBs often line up closer to the line of scrimmage than the ILBs, but may also be positioned at the same depth or deeper in coverage than the ILBs (though this is somewhat rare). There are two types of ILB's, the Mike (for strong side) and the Will (for weak side).

The yumi is exceptionally tall, standing over two meters, and typically surpasses the height of the archer (ite, 射手). They are traditionally made by laminating bamboo, wood and leather, using techniques which have not changed for centuries, although some archers (particularly beginners) may use a synthetic yumi. The yumi is asymmetric; According to the All Nippon Kyudo Federation, the grip (nigiri) has to be positioned at about two thirds of the distance from the upper tip. Scale representation of a drawn yumi The upper and lower curves also differ.

Each battery area was to have an orbit beacon, around which up to four fighters would be positioned at varying heights. These would be allocated by fighter controllers, and the S/Ls would assist by illuminating targets and indicating raid approaches, while area boundaries would be marked by vertical S/Ls. 54th (DLI) was one of six S/L regiments specially trained for this work under 31 and 50 AA Bdes. In practice, most of this was never implemented, liaison with the US Army units around Cherbourg having proved problematical.

Kafka often made extensive use of a characteristic particular to the German language which permits long sentences that sometimes can span an entire page. Kafka's sentences then deliver an unexpected impact just before the full stop—this being the finalizing meaning and focus. This is due to the construction of subordinate clauses in German which require that the verb be positioned at the end of the sentence. Such constructions are difficult to duplicate in English, so it is up to the translator to provide the reader with the same (or at least equivalent) effect found in the original text.

At the lower levels, only one judge will normally be positioned at C (the centre of the short side of the arena) and the Test may have 16 movements. At higher levels, 3 judges may be used and at International competitions and World Championships there may be up to 5 judges, with the Championship Test having 25 movements. The judges' marks are averaged (added together and divided by the number of judges). Dressage movements may include circles, figures of eight, and crossing the diagonal and all paces – walk, working trot, collected trot, extended trot, canter, a halt, and a rein back.

Under this arrangement, Intelsat-15 became JCSAT-85 for the JSAT payload, since it was to be positioned at the 85°E longitude. The almost 19-year streak of successful JCSAT launches was ended when a Proton-M/Briz-M failed to orbit JCSAT-11 on September 5, 2007. A damaged pyro firing cable on the interstage truss prevented the second stage from controlling its direction, and the rocket and its payload crashed into the Kazakhstan steppes. Being lucky in misfortune, JCSAT-11 was simply an on-orbit backup and thus it had no operational impact on the fleet.

Amparo Iturbi gave piano lessons to selected students in the early 1960s from her home in Beverly Hills. Some students regarded her as somewhat "rigorous" due to the trademark Iturbi technique, which required that fingers be positioned at rest as harpsichord-like cocked hammers, waiting to strike down on the keys, touching fingertip only. Maintaining this position and executing a key strike without moving the adjacent fingers was mandatory and it was essential that the muscles and tendons of the forearm be "relaxed" at all times while playing. This near- counterintuitive technique was considered difficult or even painful by some pianists.

A rectangular site for a church was to be positioned at each end of the crescent which was to be backed by streets and terraces of houses. A central square was to have been overlooked by a central church with an apse and was surrounded by terraces of houses which were said to have been 'under construction'. There were to be two other open squares, one to the south overlooked by the Academy with the Market in the south west corner of the 'city'. Another courtyard to the north was to be overlooked by the Town Hall.

Field layouts with tip–tilt dual axis trackers are very flexible. The simple geometry means that keeping the axes of rotation parallel to one another is all that is required for appropriately positioning the trackers with respect to one another. Normally the trackers would have to be positioned at fairly low density in order to avoid one tracker casting a shadow on others when the Sun is low in the sky. Tip-tilt trackers can make up for this by tilting closer to horizontal to minimize up- Sun shading and therefore maximize the total power being collected.

A race clock (also called a display clock) is sports equipment with an alpha numeric display that typically shows the elapsed time for a race or sporting event. A race clock may be positioned at the finish line of a race or at various key intermediate locations (split points) so that athletes will know their pace. The display is typically either light emitting diodes or plastic elements that can be flipped to reveal or hide a surface painted with a bright color. The digits on a race clock vary in sizes from 6 inches to a foot in height.

Both the proprotors and engines are mounted on load- bearing rotatable pylon at the wingtips, allowing the proprotors to be positioned at various angles. In the case of the AW609's, while flown in helicopter mode, the proprotors can be positioned between a 75- and 95-degree angle from the horizontal, with 87 degrees being the typical selection for hovering vertically; and in airplane mode, the proprotors are rotated forward and locked in position at a zero-degree angle, spinning at 84% RPM. STOL rolling-takeoff and landing capability is achieved by having the nacelles tilted forward up to 45°."V-22 Osprey Guidebook, 2013/2014." Bell-Boeing, 2013.

Only in the afternoon of 10 June did Charles instruct Admiral George Monck, Duke of Albemarle to go to Chatham to take charge of matters, a full three days later ordering Admiral Prince Rupert to organise the defences at Woolwich. Albemarle went first to Gravesend where he noted to his dismay that there and at Tilbury only a few guns were present, too few to halt a possible Dutch advance upon the Thames. To prevent such a disaster, he ordered all available artillery from the capital to be positioned at Gravesend. On 11 June (Old Style) he went to Chatham, expecting the place to be well prepared for an attack.

After raising itself into its operational geostationary orbit, by means of an FG-36 apogee motor, the satellite will be positioned at a longitude of 86.5 degrees East. At launch, Fengyun 2-07 had a mass of , however by the time it reaches its operational orbit, this will have decreased to , partly through jettisoning the FG-36. The spacecraft is cylindrical, with a diameter of , and a length of fully deployed. It is spin-stabilised at a rate of 100 rpm, and carries a five-channel Stretched Visible and Infrared Spin Scan Radiometer, or S-VISSR, capable of producing visible light and infrared images of the Earth.

Variants 1–6 are anti-aircraft games, in which the player uses a stationary anti-aircraft gun that can be positioned at a 30, 60, or 90-degree angle to shoot down four different types of aircraft. The planes typically appear in groups of three to five, and once every plane in a formation has been destroyed, a new formation appears. There are two groups of anti-aircraft games: in variants 1–3, each target hit is worth 1 point, while in 4–6, the various types of aircraft have different point values. Additionally, zero-point blimps are added as obstacles in games 4–6.

In early applications in steam locomotives, either two displacement lubricators (one for each cylinder) would be positioned at the front of the boiler near the valves, often on either side of the smokebox or one lubricator would be placed behind the smokebox. The behind smokebox configuration has the advantage that a good connection can be made to the steam pipe and was used by the Great Western Railway. It has the disadvantage that the lubricator's accessibility is reduced and additional drain pipes are required to be connected to the waste to avoid it dripping onto the boiler.Lubrication of Locomotives, B.L. Ahrons 1922, The Locomotive Publishing Co. Ltd.

The Paksat-1R satellite is based on the DFH-4 platform, with a launch mass around 5,200 kg. The satellite will be positioned at 38.0 degrees East, replacing the Paksat-1 (23779 1996-006A), which was launched as Palapa-C on 31 January 1996, by an Atlas-IIAS (AC-126) from Cape Canaveral's LC-36B launch complex. Paksat-1R was manufactured by the China Great Wall Industry Corporation (CGWIC), after being ordered in 15 October 2008 – with a contract signed with the China Great Wall Industry Corporation (CGWIC). The PakSat-1R contract was the third communications satellite contract signed by China's space industry with international customers.

This is particularly important on high-speed routes. At one time it was practice to take sighting distance into account when positioning distant signals; the distant signal could therefore be positioned at less than braking distance to the corresponding stop signal. The driver of a train encountering a distant signal at 'caution' must expect the stop signal to be at 'danger' and must adjust the train's speed so as to bring the train to a stand before reaching it. The driver of a train encountering a distant signal in the 'clear' position knows that all applicable stop signals controlled by the same signal box are in the 'clear' position.

In late 1940, Air Chief Marshal Sir Robert Brooke-Popham ordered the 2nd Battalion, 15th Punjab Regiment and a heavy gun battery from the Hong Kong-Singapore Royal Artillery, to be positioned at Kuching, the capital of Sarawak. The battalion, which numbered about 1,050 men, was commanded by British Lieutenant Colonel C.M. Lane and was a part of "SARFOR" (Sarawak Force). Some 230 men of the battalion were killed or captured in the defence of the airfield before the fall of the city to the Japanese on 24 December 1941. Two days later, SARFOR was disbanded; on the 27th, the remainder of the Punjabi force crossed into Dutch Borneo, where Lane placed them under Dutch command.

A 4.5-m-tall and near-double-sized fibreglass replica of the spurs cockerel, originally created in 1909 to sit atop the west stand at White Hart Lane, was placed on the roof structure above the South Stand on 6 November 2018. It is a faithful replica of the original, including dents caused by Paul Gascoigne when he shot at it with an air rifle. A statue of Bill Nicholson will be placed on the south west approach to the stadium; the old gate to the West Stand from White Hart Lane will also be placed here, and the statue of Nicholson will be positioned at its centre, recreating a historic photographic image of Nicholson.

When playing the game using the first-person view, damage to the eyes affects the view in appropriate ways; for example, if a boxer's eye takes enough damage so that it becomes swollen shut, that side of the view will be replaced by blackness. The view will also flash back when the player takes a hard shot, or red when they are hit by a punch that makes their face bleed. Taking substantial numbers of punches to the head will even result in simulated double vision. Other camera views include a bird's-eye view and a free-roaming camera that can be positioned at an angle and distance of the player's choosing.

During his career he worked in different fields, designing and building electrical wiring, heating systems, pipeline transport, street clocks, and traffic lights. In the 1950s he also designed a luminous signage column to be positioned at tramway stops. His name, however, is mainly linked to public street and highway lighting for the changes he made. In the early 1960s Guido Chiarelli's plans for lighting Turin were groundbreaking and elevated municipal lighting to an appreciated form of design leading to city becoming known as the Italian "Ville Lumière".Aghemo, Bistagnino, Ronchetta, Illuminare la città In 1961 for the celebrations of the centenary of the Italian unification, he particularly designed and installed several, innovative lighting systems.

Glendale Shopping Center was planned in 1955 by Howard M. Landau, along with representatives of William H. Block Co. and L. S. Ayres, two Indianapolis-based department stores which would serve as the mall's anchor stores. Each department store was to be positioned at the opposite end of a mall concourse which would contain about 45 stores in total. The site chosen for the mall was along Keystone Avenue at 62nd Street. Representatives of the William H. Block Co. chain said that they felt that the location was suitably positioned for the city's growth at the time, and that having both department stores in the same center would offer a greater shopping variety for customers.

In the planning for Operation Overlord, 85 Group was keen to have searchlight (S/L) assistance for its night-fighters in the same way as ADGB had in the UK. Two Anti-Aircraft (AA) brigade headquarters experienced in commanding searchlights, 31st (North Midland) AA Bde and 50th S/L Bde, were to be withdrawn from Anti-Aircraft Command to join 21st Army Group's GHQ AA Troops for this purpose. A detailed plan was drawn up for a belt of S/L positions deployed from Caen to the Cherbourg peninsula. This required nine S/L batteries of 24 lights, spaced at 6000 yard intervals, six rows deep. Each battery area was to have an orbit beacon, around which up to four fighters would be positioned at varying heights.

The Platform would consist of parts left over from the ISS program. Parts under consideration were Node 4 to form the main connection point, parts from the Space Shuttle's Orbital Maneuvering System (OMS) and Orbiter External Airlock would be combined to form a utility module for maneuvering, orientation and Extra-vehicular activity (EVA), a smaller version of the Canadian Arm to help with logistic and station-keeping, TransHab and/or possible inclusion of a 'Zvezda 2' or a Bigelow Inflatable station for life support systems, crew accommodations, storage, and laboratory space. Most components would be lifted into orbit using currently available EELV or commercial launchers. A reusable lander would be positioned at the platform for Moon landings and refueled using NASA's new SLS heavy lift vehicle.

The launch of Anik G1 was announced by Telesat on April 16, 2013. Anik G1 is a multi-mission satellite with three different payloads that will provide direct-to-home (DTH) television service in Canada, as well as broadband, voice, data, and video services in South America where economic growth has driven high demand for satellite services. It is also the first commercial satellite with a substantial X-band payload for government communications over the Americas and the Pacific Ocean including Hawaii. The satellite will be positioned at 107.3° West longitude where it will be co-located with Telesat's Anik F1 satellite, doubling both the C-band and Ku-band transponders serving South America from the 107.3° West orbital location.

Before the development of the Boeing B-52 Stratofortress, aircraft such as the Convair B-36 Peacemaker, Boeing B-50 Superfortress and Boeing B-47 Stratojet were parked on alert aprons at right angles. Due to the size of the aircraft, this created a problem in launching aircraft efficiently in the event of an emergency scramble, requiring a different solution to be devised. To fix this, aircraft were repositioned on specifically designed alert aprons arranged in herringbone configurations, which then allowed the planes to pull out onto the runway as quickly as possible. This meant that the aircraft would be positioned at 45 degrees in relation to an alert apron center-line leading to a short taxiway and then onto the nearest runway(s).

JSAT had leased some transponders to NTT DoCoMo to be used as N-STAR d. Once in its 132° East orbital position, it was known as JCSAT 5A and N-STAR d. Then, on 11 October 2006, an Ariane 5 ECA launched JCSAT-10 along Syracuse-3B into a transfer orbit. Upon successful deployment at 128° East longitude, it was renamed JCSAT-3A. On 1 May 2007, Intelsat put the order for the STAR-2-based Intelsat 15 satellite to Orbital Sciences. In a business deal, five of its 22 Ku-band transponders were sold to JSAT. Under this arrangement, Intelsat-15 became JCSAT-85 for the JSAT payload, since it was to be positioned at the 85° E longitude.

In the planning for Operation Overlord, No. 85 Group RAF was to be responsible for Night-fighter cover of the beachhead and bases in Normandy after D-Day, and was keen to have searchlight assistance in the same way as Fighter Command had in the UK. 50 AA Brigade (now often referred to as 50 S/L Bde) joined 21st Army Group's GHQ AA Troops for this purpose, although it retained responsibilities under AA Command. A detailed plan was drawn up for a belt of S/L positions deployed from Caen to the Cherbourg peninsula. This required nine S/L batteries of 24 lights, spaced at 6000 yard intervals, six rows deep. Each battery area was to have an orbit beacon, around which up to four fighters would be positioned at varying heights.

Praying with a sutrah, here a camel's saddle A sutrah ( lit., "screen, cover") is an object used by a person performing salat as a barrier between himself and one passing in front of him.Bukhari, Book 2, Volume 15, Hadith 89, 90: The Two Festivals (Eids)Bukhari, Book 1, Volume 8, Hadith 373, 422: PrayersBukhari, Book 1, Volume 4, Hadith 187: AblutionsSahih Muslim, Book 4, Hadith 1011: The Book of Prayers The person praying should be positioned at less than or equal to three forearms' length away from the Sutrah. The Sutrah’s height must be no less than one forearm's length (i.e. the height of the rear end of a camel's saddle),Muslim, Book 4, Hadith 1008, 1009: The Book of Prayers whereas its width has no stipulated size.

State-of-the-art CNC technology is used by U-JIN Tech Corp both for automatic material transport and in cases where high accuracy is required. Due to the position measuring devices known from CNC milling machines, the length tolerance of the components can be maintained more accurately than with conventional hydraulic machines. It is even possible, to bring the spindle to a standstill in a given position so that the two eyes of a drive shaft can be positioned at an angle to each other. The two spindles of U-JIN's computer numerical controlled double-head friction welding machines are driven by servo motors that allow the angular position of their motor shaft to be controlled, as well as the speed of rotation and acceleration, since they are equipped with position sensors.

However, in July 1900 it was declared unsafe by the Multnomah County Board of Commissioners, and plans to replace it with a new swing-type draw span were accelerated. The new swing span was constructed in fall 1900, and it was made stronger than its predecessor by an additional tower built over the middle pier, connected to the outer ends of the span by iron or steel rods. On June 21, 1902, a fire that destroyed six blocks of east-side waterfront property also heavily damaged the bridge's eastern approach viaduct, closing the bridge to all traffic for several weeks. It reopened to pedestrians on July 18, to horse-drawn vehicles on August 5, and subsequently to streetcars. By 1907, planning was under way for the bridge to be replaced by a new structure that would be positioned at a higher elevation over the water and be constructed of steel instead of wood.

Huron Tract Purchase area, located in southern Ontario, highlighted in yellow In 1828 he emigrated to Oxford Township East, in Upper Canada, where he purchased 200 acres (809,000 m²) of land from the Canada Company. Because of the establishment of a personal friendship with local company official John Galt, Van Egmond came to the attention of other Canada Company executives and was subsequently employed by the company as the initial primary contractor for road construction in the Huron Tract. Van Egmond was also charged with establishing a series of inns to be positioned at twenty mile (32 km) intervals along the Huron Road, which were to act as nightly stopping and resupplying points for the arriving settlers. Although Van Egmond continued to complete his contractual obligations to the Canada Company, he continually resented that the Company insisted on paying all fees in the form of one-third cash and two-thirds company 'land credits', redeemable in exchange for parcels of land already owned by the company.

The disadvantage of this mount is that the pressure rises much faster than in a drilled cartridge case. This causes high frequency oscillations of the pressure sensor (approx 200 kHz for a Kistler 6215 transducer) and this requires electronic filtering with the drawback that filtering also affects the lower harmonics where a peak is found causing a slight error in the measurement. This slight error is not always well mastered and this causes a lot of discussion about the filter order, cutoff frequency and its type (Bessel or Butterworth).Technical Report ARCCD-TR-95005 5.56 MM M856 TRACER MINI ROUND ROUND ROBIN STUDY, ARDEC/CCAC, October 1995 by Lascelles A. Geddes For the 9mm NATO EPVAT specifies that for 9×19mm Parabellum (9mm Luger in C.I.P. nomenclature and 9mm NATO in NATO nomenclature), the transducer must be positioned at the mid case position () from the breech face instead of C.I.P.'s from the breech face.

While Bde HQ concentrated in this task, all its units were distributed under the operational command of other British and US AA brigades, apart from those training on the new radar and predictors.Routledge, Table LIII, p. 342. Captured V-1 displayed at Antwerp at the end of World War II. To defend against V-1s falling in the city and dock area, the British and US guns had to be positioned at least 10 miles outside the city (codenamed the Nylen Belt), integrated into a system of warning stations and observation posts, supported by radar and searchlights. No 1 Identification Troop and No 2 Local Warning (Radar) Troop were formed by 80 AA Bde for this purpose, manned by the Royal Signals and 114th LAA Rgt respectively. This 'Antwerp X' defence deployment took its full form in December 1944, in time for the peak in V-1 attacks that lasted into February 1945.Routledge, pp. 336–9. The responsibility for siting the six early warning stations and 30 gun position radar sets over a wide area fell to 80th AA Bde's Instructor Fire Control (Radar), Captain William Adams, and his assistant, Staff Sergeant B.T. Bayne.