How to use peripheral unit in a sentence? Find typical usage patterns (collocations)/phrases/context for "peripheral unit" and check conjugation/comparative form for "peripheral unit". Mastering all the usages of "peripheral unit" from sentence examples published by news publications.
By analogy it was jokingly suggestedFisk p.18 that the CPU, which in those days was an equipment rack of similar size to a large peripheral unit, contained a similar receptacle for lost data.
|
|
The processor acts as the CPU for the switch. The processor includes a central control, call stores, and program stores. In addition it had access to additional units through the auxiliary unit bus (AUB) and peripheral unit bus (PUB). A master control console (MCC) provides office technicians access to the switch through the processor peripheral interface (PPI).
|
|
The distance on this was 2 miles from a host office and fed direct via fiber. As with any SM, the size is dictated by the number of time slots needed for each peripheral unit. ORM's are linked with DS3, RSM's are linked with T1 lines. The VCDX was also used as a large private branch exchange (PBX).
|
|
Chora is located in the southwestern part of Greece, in the peripheral unit of Messinia in Greece. It is 273 kilometers away from Athens, 205 kilometers away from Patras and 55 kilometers away from Kalamata. It has an altitude of 294 meters and it is built on the foothills of Aigaleo Mountain and 12 kilometers away from the Ionian Sea. Chora is 10 kilometers away from Gargalianoi and 21 kilometers away from Pylos.
|
|
The peripheral units include units that interface to the central control over the peripheral unit bus. This includes the common channel interface signaling (CCIS) terminal, signal processors, time-slot interchanges (TSI) and time multiplexed switches (TMS).Bell System Technical Journal, v56: i7 September 1977, No. 4 ESS: Peripheral Systems It also includes equipment not directly on the PUB including terminating equipment used to connect the switch to the transport network and the TSIs and TMSs, which actually perform the "time-space-time" switching function. Timing is provided by a high speed, high accuracy network clock.
|
|
Each magnetic latching relay had one transfer contact dedicated to sending a pulse back to the SD, on each operate and release. The pulser in the SD detected this pulse to determine that the action had occurred, or else alerted the maintenance software to print a FSCAN report. In later 1AESS versions SD were solid state with several SD points per circuit pack generally on the same shelf or adjacent shelf to the trunk pack. A few peripherals that needed quicker response time, such as Dial Pulse Transmitters, were controlled via Central Pulse Distributors, which otherwise were mainly used for enabling (alerting) a peripheral circuit controller to accept orders from the Peripheral Unit Address Bus.
|
|
No results under this filter, show 6 sentences.