The outer body flash of it, the hot thrush of quickened heart.
|
|
WATTERS: You went on the subway once, and it was like an outer body experience.
|
|
"It was just one of the most outer-body experiences I've ever had," Ekstrom tells PEOPLE.
|
|
The surrealism and eroticism go hand in hand as outer body experiences, a constant expression through my work.
|
|
The X-Pro13 doesn't change the outer body too much, although there are a few tweaks we'll get into later that do make a meaningful difference to the shooting experience.
|
|
When I spoke to Davidson, she described "changing the gender of the space": the entrance portico consisting of roughly leg-shaped columns; the room glowing red, filled with giant inflatable structures and big DNA strands as curvy as one's outer body, all placed in a circle.
|
|
The video is cribbed from sources like the sci-fi film "Contact" (1997), documentary footage from Ms. Baga's family's native Philippines, interviews with people on outer-body experiences, and the Wikipedia entry for World Contact Day calling on humans to bond together to communicate with aliens.
|
|
The outer body wall consists of connective tissue, muscle fibres, and a simple epithelium directly underlying the tunic. The colorful Polycarpa aurata sits in a bed of white bryozoans (Triphyllozoon inornatum).
|
|
Regardless of manufacturer the basic principle of operation is the same. The cable has its outer layers wrapped around a metal cone, with the rope's core running through a hole in the middle of the cone. The assembly sits inside a conical outer body. When the cable is in tension, the action is such that the cone and wire are drawn further into the conical bore of the outer body resulting in a large reaction load.
|
|
Godzilla reactivates and energises the electrodes with his atomic heat ray, dehydrating Hedorah's outer body. Hedorah sheds this outer body and takes flight to escape, but Godzilla propels himself through the air with his atomic heat ray to give chase. Godzilla drags Hedorah back to the electrodes and continues to dehydrate him until Hedorah is on the brink of defeat. Godzilla tears open Hedorah's dried-out body and exposes it to the electrodes again, dehydrating the pieces until nothing remains but dust.
|
|
Empuls, Sonsee, Steven King & iCON The Mic King) # Birds (feat. Jay-Notes & Redd Mudd & Scratch Johnson AKA DJ Drastic Ohio on the cuts) # Democracy (feat. Canibus) # Outer Body Experience # Psalm Of Satan (feat. Ill Bill & Sabac Red) # The Rose (feat.
|
|
Coelom is the mesodermally lined cavity between the gut and the outer body wall. During the development of the embryo, coelom formation begins in the gastrulation stage. The developing digestive tube of an embryo forms as a blind pouch called the archenteron. In Protostomes, the coelom forms by a process known as schizocoely.
|
|
In order to enter each pose. Typically, these 7 steps are cued and practiced in this specific order: #'Neutralize' Relax the outer body's musculature. This is also known as softening the outer body. Since this takes place as the first part of a pose, it creates less gripping and resistance for the following steps.
|
|
These genera are known as soft ticks because their outer body surfaces lack hard plates. The family Ixodidae contains 14 genera,Guglielmone, AA, Robbins, RG, Apanaskevich, DA, Petney, TN, Estrada- Pena, A, Horak, IG, Shao, RF and Barker, SC(2010). The Argasidae, Ixodidae and Nuttalliellidae (Acari: Ixodida) of the world: A list of valid species names.Zootaxa (2528) 1-28.
|
|
I feel like I was hit by an electric current." He admitted that it was a "pretty easy choice" choosing which scene to submit for consideration; Ehrich chose a scene where Fenmore tells Jamie that Summer is the one cyberbullying him. He stated that he chose that episode "because that day, I felt this outer body experience.
|
|
Tegument is a term in helminthology for the outer body covering of members of the phylum Platyhelminthes. The name is derived from a Latin word tegumentum or tegere, meaning "to cover". It is characteristic of flatworms including the broad groups of tapeworms and flukes. Once considered to be a non-living component, it is now known to be a dynamic cellular structure.
|
|
Duroplast was used by the German Democratic Republic state-owned automobile manufacturer VEB Sachsenring Automobilwerke Zwickau from 1955 until just after German Reunification in 1991. It was the material used to produce the outer body of the Trabant. There were four main versions of the Trabant; the 1964–1990 Trabant 601 was the longest running. The successor company is called HQM Sachsenring GmbH.
|
|
On the male plug, the outer body is metallic and cylindrical in shape, and comprises one of the two contacts. The second, inside contact is a hollow metallic cylinder constructed to accept insertion of the pin in the corresponding male connector. The inner and outer barrels are separated by an insulating layer, which is flared at the tip to prevent a short circuit when the plug is inserted or removed.
|
|
Transfer of bacteria occurs when the fly takes off and lands on an open wound or food material. Physical contact flakes the pathogen off the fly's body and causes contamination. The spread of a pathogen by means of a fly's outer body, such as its feet, to the host, is referred to as mechanical transmission. It is possible to determine the identify pathogen carried by identifying the species of fly.
|
|
The back, once gilded, is now plain, and only the heads have decorations on both sides. The outer body of the two-headed snake is covered in a mosaic of turquoise, accented by red spiny oyster. Turquoise stones were broken in small, flat tesserae and adhered to the wooden body with pine resin. By using 2,000 small pieces, the flat pieces of stone give the impression of a faceted, curvilinear surface.
|
|
The outer body ranges from dark brown to black, while the legs are black with a red tinge. At in size, it is one of the largest of the genus Aphodius. It has ten ridges on each of its wing-covers (called elytra).Collins Complete Guide to British Insects by Michael Chinery, 2005, page 116 It has a shovel-shaped head which it used to move the earth when it burrows.
|
|
The Kine Exakta is made of two major aluminium alloy castings, the outer body shell and the internal frame for the mirror box, the shutter mechanism and the film transport. The latter is inserted into the shell from the top and secured by screws. A fixed finder hood and a separate detachable back cover complete the general layout. The Exakta bayonet lens mount was developed for this camera.
|
|
The 2+2 was equipped with a engine, dual exhaust, heavy duty front springs as well as its own outer body trim appointments. It officially became its own series in 1966, on the same platform, but reverted again to an option on the Catalina in 1967Bonsall, pg. 127. and was discontinued in the United States the same year due to poor sales. It continued as a series in Canada until 1970.
|
|
Pininfarina's bodywork was manufactured by coachbuilder Carrozzeria Scaglietti. Its used outer body panels fitted to a separate space-frame chassis of tubular box or oval-shaped steel sections. While most body panels are steel, the front lid and rear engine cover of the Mondial 8 and QV models are aluminium. Full-width aluminium louvre panels across the front lid and engine cover provide airflow through the front- mounted radiators and engine bay.
|
|
Lauren O'Neill of Vice wrote that the song has "a super chilled-out, laid back vibe in the vein that Miguel always does best". Mikey Fresh of Vibe thinks that the song, which he described as "trippy", "takes listeners on a smoked-out voyage complete with kush clouds and outer-body experiences". Carl Lamarre of Billboard called it a "celebratory song". Jordan Sargent of Spin described the song as "light and airy".
|
|
The welded design also lends itself to customization. Special features are easily added to the cylinder body, including special ports, custom mounts, valve manifolds, and so on. The smooth outer body of welded cylinders also enables the design of multi-stage telescopic cylinders. Welded body hydraulic cylinders dominate the mobile hydraulic equipment market such as construction equipment (excavators, bulldozers, and road graders) and material handling equipment (forklift trucks, telehandlers, and lift-gates).
|
|
This lens uses a front extension focusing system, powered by a ring USM motor. Auto-focus speed of the lens is moderate; it is not as fast as most ring USM lenses. The front of the lens does not rotate, but does extend when focusing. The lens is designed so that the outer body barrel is longer than the inner lens barrel, when the inner lens barrel is at its longest extension.
|
|
Blocked Sina Weibo search for Xi Dada beetle. Censors in China have clamped down on any online references to the new beetle species. Wang had not only named the beetle for paramount leader Xi, but also added the word “wolf” in Chinese: 习氏狼条脊甲 (literally, “Xi Surnamed Wolf Spine Carapace”). The word wolf was added to indicate that it was a beetle, differentiating it from the cockroach which has relatively soft outer body.
|
|
Instead of using wax coating on the outer body to keep moisture out (moisture renders capacitors useless), Sprague applied a plastic resin material to encapsulate the device and provide better and longer-lasting resistance to moisture. In the late 1960s capacitors developed quickly as better materials, such as mylar, were used in their production. Capacitors became more reliable, smaller, and able to withstand higher voltages. Sprague Electric's "Orange Drop" capacitors were well received by manufacturers and designers.
|
|
The term badge engineering is an intentionally ironic misnomer, in that little or no actual engineering takes place. The term originated with the practice of replacing an automobile's emblems to create an ostensibly new model sold by a different maker. Changes may be confined to swapping badges and emblems, or may encompass minor styling differences, as with cosmetic changes to headlights, taillights, front and rear fascias and outer body skins. More extreme examples involve differing engines and drivetrains.
|
|
The central gopuram tower of the vimana and the other gopura towers that dominated the town were covered with plates of gilded brass, gold and copper on their roofs. Its outer body featured intricately carved domes, with elaborate arches and gates opening to various verandas and shrines of the complex, giving Tenavaram the appearance of a golden city to sailors who visited the port to trade and relied on its light reflecting gopura roofs for navigational purposes.
|
|
Chrysler claimed to be the first to apply these features to a full-size car. Likewise, the Dodge Stratus and Chrysler Cirrus have a hood that is wider than it is long because engineers established a goal of packing the engine and everything else that is located ahead of the passenger compartment into a much smaller space and then the designers developed the car's outer body to offer more interior roominess than competing models in their size class.
|
|
The smallest stage is often called the plunger or piston rod. The cylinders are usually mounted in machinery by pivot mounts welded to the end or outer body of the barrel as well as on the end of the plunger. pneumatic telescoping cylinder, 8-stages, single-acting, retracted and extended Telescopic cylinders are commonly restricted to a maximum of 6 stages. 6 stages are commonly thought to be the practical design limit as stability problems become more difficult with larger numbers of stages.
|
|
Other organizations founded by Clymer include the Church of Illumination, the College of the Holy Grail, and the Sons of Isis and Osiris."Clymer, Reuben Swinburne" in The Watkins Dictionary of Magic by Nevill Drury, p.150; also The Dictionary of the Esoteric by Nevill Drury, Motilal Banarsidass, p.52 The Church of Illumination serves as an outer body for the FRC, spreading its teachings under the name of "Divine Law" in hopes of bringing about a new era through symbolic alchemy.
|
|
Marking a high point in terms of sales, the last-of-the-series VL Commodore sold in record numbers, finally managing to outsell the Ford Falcon in the private sector.Davis, Kennedy, Kennedy (Part Two), p. 94 The 1986 VL represented a substantial makeover of the VK and would be the last of the mid- size Commodores for 30 years. Designers distanced the Commodore further away from its Opel origins, by smoothing the lines of the outer body and incorporating a subtle tail spoiler.
|
|
Tinctures were made to treat internal bleeding by soaking mummified bodies in alcohol or vinegar. Powdered skull was used to treat ailments of the head, and was even sometimes mixed with chocolate to treat apoplexy. In the 1800s, Englishmen treated epilepsy by mixing skull with molasses. In addition, human fat was used to treat problems of the outer body either by rubbing it directly on the skin or soaking the bandage in fat first then applying it on the wound.
|
|
The entire carbon-fiber monocoque chassis ("tub") of the car weighs . Front and rear aluminum subframes combine with the tub, roof reinforcements and engine mounting to comprise the 4C chassis giving the vehicle a total chassis weight of and a total vehicle curb weight of just . The 4C has a single carbon fiber body, similar to the body of many supercars. The outer body is made of a composite material (SMC for Sheet Moulding Compound) which is 20% lighter than steel.
|
|
This is relatively large compared to other bivalves and contains the visceral mass and the gonads. J. Lützen, B. Berland & G.A.Bristow, Morphology of an endosymbiotic bivalve, Entovalva nhatrangensis (Bristow, Berland, Schander & Vo, 2010) (Galeommatoidea); Molluscan Research 31(2): 114–124 ; ISSN 1323-5818 Entovalva nhatrangensis can be distinguished from the other three previously described species in the genus Entovalva by the different shape of its body and foot, and by the fact that its outer body epithelium is distinctively folded.
|
|
The well-developed longitudinal muscles of the body wall of serpulids lack a special blood supply. The body surface in the larger serpulids, like Serpula, has a rich blood supply, and the water in contact with this surface is constantly renewed. It seems probable that the outer body surface of serpulids serves as a respiratory membrane, supplying oxygen to the underlying muscles by diffusion. Chlorocruorin The biochemistry of the blood of Serpula is especially unusual in that the blood contains not only hemoglobin, but also chlorocruorin.
|
|
Four pairs of appendages are sensory and breathing organs (branchiae) at least in length. They are arranged along the upper and side ridges of the head, arising from the pair of feather-like nuchal organs which analyze chemical signals in the sea. The fifth pair of appendages are grooved and coiled feeding palps arising from below the mouth, which is located in the front-bottom corner of the head. Their internal anatomy is relatively visible from the outside since their outer body is semi- transparent.
|
|
Adult female flies tend to lay eggs in decaying material such as food or dead organisms and fresh fecal material. The fecal material houses a vast number of pathogenic bacteria, viruses, protozoan and other disease-causing agents. Most of the bacteria and viruses are not introduced from the fecal material to the fly when in the egg or larvae form; rather, the transfer occurs in the transition of a young fly to adulthood. Fecal particles attach to the fly's outer body as it emerges from the larvae.
|
|
A common method of working is to start with a prototype model and produce smooth mathematical Class A surfaces to describe the product's outer body. From this the production of tools and inspection of finished parts can be carried out. Class A surfacing complements the prototype modelling stage by reducing time and increasing control over design iterations. Class A surfaces can be defined as any surface, that has styling intent, that is either seen, touched, or both and mathematically meets the definition for Bézier.
|
|
300px The M84 features a magnesium-based pyrotechnic charge inside a thin aluminum case, contained within a perforated cast steel body. Unlike the high explosives (HE) used in traditional ordnance, the pyrotechnic charge produces a subsonic deflagration, not a supersonic detonation, minimizing the blast effects. On initiation the auditory and visual elements of the deflagration being permitted to escape via the perforations in the cast outer body. This design minimizes the risk of collateral damage due to flame, blast and unconsumed fragments of the inner case.
|
|
The submersible features two robotic arms and can be fitted with mission-specific sampling and experimental gear. The plug hatch of the vessel is in diameter and somewhat thicker than the thick titanium sphere pressure hull; it is held in place by the pressure of the water above it. In an emergency, if Alvin were stuck underwater with occupants inside, the outer body, or cladding, of the submersible could be released and discarded using controls inside the hull. The titanium sphere would then rise to the surface uncontrolled.
|
|
At this moment Shiva appeared, determined that since Shatarupā was Brahma's daughter (being created by him), it was wrong and merged into devi Mookambika and formed the Ardhanarishvara, translated as "half-man and half-woman god." Shiva told Brahma that males and females are both the same as their souls are exactly the same, and the soul doesn’t have a gender only material. The outer body is different only because of different body parts. Shatarupa married Svayambhuva Manu and had five children — two sons, Priyavrata and Uttānapāda, and three daughters, Ākūti, Devahūti and Prasuti.
|
|
Most startle patterns are brightly colored areas on the outer body of already camouflaged animals. (Another example of the use of startle patterns is the gray tree frog, with its bright-yellow leggings. When it leaps, a flash of bright yellow appears on its hind legs, usually startling the predator away from its prey.) Distraction patterns are believed to be a form of mimicry, meant to misdirect predators by markings on the moths' wings. The pattern on the hindwings of the Polyphemus moth resembles that on the head of the great horned owl (Bubo virginianus).
|
|
Oligochaeta () is a subclass of animals in the phylum Annelida, which is made up of many types of aquatic and terrestrial worms, including all of the various earthworms. Specifically, oligochaetes comprise the terrestrial megadrile earthworms (some of which are semiaquatic or fully aquatic), and freshwater or semiterrestrial microdrile forms, including the tubificids, pot worms and ice worms (Enchytraeidae), blackworms (Lumbriculidae) and several interstitial marine worms. With around 10,000 known species, the Oligochaeta make up about half of the phylum Annelida. These worms usually have few setae (chaetae) or "bristles" on their outer body surfaces, and lack parapodia, unlike polychaeta.
|
|
The DMC DeLorean (often referred to simply as the "DeLorean") is a sports car and the only automobile manufactured by John DeLorean's DeLorean Motor Company (DMC) for the American market from 1981 to 1983. The car was designed by Giorgetto Giugiaro and stood out for its gull-wing doors and brushed stainless-steel outer body panels. It became widely known for its disappointing lack of power and performance, which did not match the expectations created by its looks and price tag. It is memorable for its appearances as the time machine in the Back to the Future media franchise after 1985.
|
|
European squid (Loligo vulgaris). The mantle is all that is visible behind the head: the outer body wall and the fins are all part of the mantle. The brightly coloured mantle of a giant clam protects it from bright sunlight. The cuttlefish uses its mantle cavity for jet propulsion The mantle (also known by the Latin word pallium meaning mantle, robe or cloak, adjective pallial) is a significant part of the anatomy of molluscs: it is the dorsal body wall which covers the visceral mass and usually protrudes in the form of flaps well beyond the visceral mass itself.
|
|
Some of these jacks contain a normally closed contact, which can be used to disconnect internal batteries whenever the power supply is connected, avoiding the risk of battery leakage or explosion posed by incorrect recharging of the batteries. Cylindrical plugs usually have an insulated tip constructed to accept insertion of a pin. The outer body of the plug is one contact, most often but not always the negative side of the supply. Inverted polarity plugs can, and do, damage circuitry when plugged in, even if the voltage is correct; not all equipment is equipped with protection.
|
|
Unlike the GTA and GTA Junior, in which all the outer body panels were made of aluminium alloy instead of the standard car's steel, the GTAm retained the standard steel body modified with some aluminium and/or plastic parts. Because of an increased minimum weight in 1971 (up from 920 to 940 kg), the GTAm's had less need for lightweight body parts. For a clearer understanding of how the GTAm was built you need to check the competition rules in the period the GTAm raced, i.e. the FIA rules for 1970/71/72 plus homologation FIA 1576 Group 2 document.
|
|
More important, the "big secret" of stealth, faceting, was starting to leak out. In 1986, there were reports that the F-19 was not smooth, but rather had "a multi-faceted outer-body surface" and a "cut-diamond exterior". This was described as being thousands of flat surfaces, none more than eight square inches in size, which did not share the same "reflectivity angle." The F-117A actually used large panels, but the basic principle was the same. F-117A Nighthawk 79-7084 shown in a hangar at Nellis AFB, Nevada, while attached to the 57th Fighter Weapons Wing (Detachment 1).
|
|
Some multicellular organisms such as flatworms (Platyhelminthes) are relatively large but very thin, allowing their outer body surface to act as a gas exchange surface without the need for a specialised gas exchange organ. Flatworms therefore lack gills or lungs, and also lack a circulatory system. Other multicellular organisms such as sponges (Porifera) have an inherently high surface area, because they are very porous and/or branched. Sponges do not require a circulatory system or specialised gas exchange organs, because their feeding strategy involves one-way pumping of water through their porous bodies using flagellated collar cells.
|
|
Although related to the Audi B5 S4, many of the outer body panels were altered, with wider front and rear wheel arches, to allow for the wider axle track on the RS 4. With unique front and rear bumpers and side sills, and the rear spoiler from the S4 Avant, the aerodynamic modifications achieved a drag coefficient of Cd 0.34. Although the B5 S4 came in a saloon car body style, the B5 RS 4 was only available in the Avant version. Luggage space, measured according to the industry standard VDA method was with the rear seats in the upright position, and with the seats folded flat.
|
|
Notably, Ongata Rongai is famous for its customized public service vehicles operating on 125/126 route (otherwise known as 'nganya' or 'pimped matatus'). Such vehicles usually have animated graphics on the outer body while the inside is fitted with free wi-fi, numerous speakers and LCD screens for loud music surrounding. The 'Catalyst','Brain Freeze','Batman','Phantom 808' 'Vintage','Sparxx','Mack Truck' and 'Intoxicated' are rides that have come to be known as Nairobi's finest public service vehicles. Rongai is also the home of many known artists and celebrities, the likes of Royce, Sharama, Chiwawa, Baby t, X-tatic, DJ Mo, Ndavi and many more.
|
|
Vanwesekbeeck suggests that this "...makes women take distance from their bodies, doubt their bodies' capacities, and results in a lack of experience in using the body effectively" (p. 890). Experience of objectification can vary greatly from woman to woman, but has been suggested to considerably effect how a woman experiences her own sexuality. Vanwesekbeeck When women's bodies are more frequently subject to the male gaze, particularly in regard to sexualization, this can lead women to continually police their body image. This creates what Masters and Johnson called spectatoring, whereby women are continuously conscious of their outer body experience, and in doing so, are completely unaware of their inner body experience.
|
|
Redesigned HTC Hero for Sprint, available in Canada from Manitoba Telecom Services as the HTC Android 6250 (Hero) The Sprint, Cellular South, Cellcom, Bluegrass Cellular, Manitoba Telecom Services, NTelos, and Cox Wireless version of the HTC Hero is different from those that are sold in Asia, Canada and Europe. The outer body is significantly altered, with the controversial "chin" that is present on the Asian, Canadian (some providers) and European models being removed in favor of a smooth, beveled surface where all but two of the once raised buttons now lie flat. Also due to performance issues some of the clock animations were removed. Some carriers may market it as the HTC Android 6250.
|
|
The roadster was built as the Corvette, the Corvair fastback variant never went in production, and two-door Nomad station wagon was eventually built as the Chevrolet Nomad.Concept Cars of the 1950s, History TV During the last half of 1953, 300 Corvettes were to a large degree, hand-built on a makeshift assembly line that was installed in an old truck plant in Flint, Michigan while a factory was being prepped for a full-scale 1954 production run. The outer body was made out of then- revolutionary glass fiber reinforced plastic material. Although steel shortages or quotas are sometimes mentioned as a factor in the decision to use fiberglass, no evidence exists to support this.
|
|
The Int-Ball's motion control system is capable of executing a rotation on any axis, and is also capable of overall movement in any general direction. The internal structural elements and outer body of the Int-Ball system were produced using 3D printing. The simulated "eyes" modeled on the exterior of the ball represent the direction of the "gaze" of the Int-Ball, which is in fact a single camera lens situated in the approximate center of the two "eyes". The Int-Ball system was designed with the hope of reducing or eliminating the amount of time spent by astronauts aboard the ISS in photo-video documentation activities, which have been estimated to consume approximately 10% of the astronauts' work time.
|
|
Clippers and Studebakers would also share many inner and outer body panels. (A private presentation of this 1957 new-car program was made to Wall Street's investment bankers at the Waldorf-Astoria Hotel in New York in January 1956.) These models were in many ways far advanced from what would be produced by any automaker other at the time, save Chrysler, which would soon feel public wrath for its own poor quality issues after rushing its all−new 1957 lines into production. Nance was dismissed and moved to Ford as the head of the new Mercury-Edsel-Lincoln division. Although Nance tried everything, the company failed to secure funding for new retooling, forcing Packard to share Studebaker platforms and body designs.
|
|
55022 Royal Scots Grey August 2009 In July 2004 Martin Walker purchased 55022 Royal Scots Grey. In December 2004 preparation were made to move 55022 from Hornsey TMD to Barrow Hill Engine Shed where the major work was to be undertaken by the Deltic Preservation Society. The move was done in January 2005 with help from the Class 40 Preservation Society, by providing its Class 40 40145 East Lancashire Railway for rail transportation. In July 2005 the first section of the outer body skin was welded into place. Work was completed in July 2006 and both Napier Deltic engines were started successfully. The next major leap for Royal Scots Grey was in August 2006 when TPWS and OTMR are all certified and mainline tests were successfully completed.
|
|
The GTA automobiles were also manufactured in either street (Stradale) or pure race (Corsa) trim. The GTA had aluminium outer body panels instead of steel, (the inner steel panels were also of thinner gauge, the inner and outer panels were bonded and pop-riveted together), magnesium alloy wheels, clear plastic side windows, an aluminium rear upper control arm, different door handles and quarter window mechanisms, and lightweight interior trim. The engine had a new double ignition cylinder head (called twin plug, later in the eighties the system was called twin spark) cylinder head with a Marelli distributor from a Ferrari Dino, 2-barrel 45 mm Weber carburetors instead of 40 mm and magnesium camshaft cover, sump, timing cover and bell housing. The transmission gear ratios were closer than standard and the gears were machined for lightness and quicker shifting.
|
|
The case gained public notoriety when Frank Hsieh, who was a lawyer and legal consultant to Sung at the time, and his wife Yu Fang-chih (游芳枝), were reported to be long time followers of Sung. Yu went so far as to profess personally witnessing Sung's spirit leave his body at will. In 2005, Sung told TVBS cable news that in 2004 at a gathering in a follower's home, he had taken Hsieh on an outer body tour of Paris with a stopover at the Eiffel Tower where they could touch the cast iron. Hsieh temporarily disappeared from the political scene after it was alleged he had taken inappropriate political donations from Sung and faced fierce criticism from the public over his membership in Sung's cult Sung admitted to police in charge of the investigation that he lied about having supernatural powers and police demolished the Miracle Association Memorial Hall, his Transmogrification Society's main shrine, on the grounds that it was built illegally.
|
|
1972 Continental Mark IV, showing pre-facelift grille and headlight doors open Following the successful redesign of the Lincoln Continental for the 1970 model year, Ford Motor Company chose an evolutionary design path for the successor of the Continental Mark III. With designers again using sharp-edged fenders, hidden headlamps, and a tall radiator-style grille, the Continental Mark IV retained the traditional "long-hood, short deck" coupe proportions of the Mark III along with its "Continental spare tire" decklid. The spare tire was actually stored on a ledge in the trunk on top of the gas tank, immediately behind the rear seat. In a cost-cutting move, however, Ford Motor Company forced the Mark IV to increase parts commonality with the Ford Thunderbird; while the roofline, doors, and inner body panels were shared, the Mark IV and Thunderbird still were given different outer body panels below the roofline and different interiors.
|
|
This DeLorean is later badly damaged (after returning to 1986, Marty crashes the Clone DeLorean into a billboard and after Marty gets out, the Clone DeLorean falls through the billboard and crashes onto the ground) and then restored by an alternate version of Doc Brown who has never developed time travel technology, having access to limited notes about the flux capacitor. As such, the time circuits of the alternate Clone DeLorean become even more glitchy following their return to 1931, accumulating errors as severe as the interval of time traveled, with increasing damage with every attempt: as such, Citizen Brown, the alternate version of Doc, has to install a diagnostic console made of materials available in 1931 (appearing as a plywood box with a lightbulb and three similar bulbs placed on the coils on the outer body).Back to the Future: The Game, Chapter 4 – Double Visions Apparently, part of the problem is chromium parts becoming unstable during time travel, according to Citizen Brown. This DeLorean is later stolen by Edna Strickland, one of the game's main villains.
|
|
1987 Shelby GLH-S The 1987 Charger GLH-S was based on the 1987 Shelby Charger. Shelby Automobiles purchased the last 1000 of these & they were shipped to the Whittier factory for modification. Shelby modified the Charger using the same pieces as the 1986 GLH-S with some changes. These included a non EGR turbo, Shelby valve cover, wider Shelby windshield decal (no CS logos), different & more extensive tape graphics package, no reference to Dodge on the outer body, black/white speedo overlay, a 4-digit serial numbering system on the dash plaque, wider Mobil 1 plaque installed on the radiator support, & Centurian II wheels. Notes: The 1987 Charger GLH-S uses 1986 electronics & fault codes. The dash plaque on 1987 GLH-S Chargers read "Shelby Automobiles Inc", "Carroll Shelby" autograph and "Charger GLH-S ####". Some early (low s/n) Charger GLH-S's came with a shortened 1986 GLH-S windshield decal (CS logos removed). All 1986 & 1987 GLH-S's were first run using conventional oil for engine break-in, then filled with Mobil 1 oil.
|
|