Sentences Generator
And
Your saved sentences

No sentences have been saved yet

60 Sentences With "electrical connector"

How to use electrical connector in a sentence? Find typical usage patterns (collocations)/phrases/context for "electrical connector" and check conjugation/comparative form for "electrical connector". Mastering all the usages of "electrical connector" from sentence examples published by news publications.

From raw material to electrical connector pin in the airbag of a finished car, it will travel between Britain and the European continent as many as five times during the production process — without encountering any customs barriers.
In a market update on Tuesday, TAQA said there were occasional element and electrical connector failures and it was working with the equipment manufacturer to understand the cause, carry out repairs and/or improve the reliability of the heater elements.
The new Droid devices, which also carry the Moto Z name (and will be sold under that moniker outside the U.S.) pack a lot of the components found on high-end smartphones, but have as their unique feature the ability to connect to a range of devices using a gold-plated electrical connector.
ISO 11446:2004 specifies a 13-pole electrical connector between towing and towed vehicles with 12 volt electrical system.
A total of eight ZX Microdrive units could be connected to the Interface 1 by daisy chaining one drive to the next via an electrical connector block.
While working at Hazeltine Corporation, Dr. Salati was awarded United States patent #2,540,012 which was the basis for what is now commonly known as the BNC connector. The patent for Electrical Connector was filed May 19, 1945, and issued January 30, 1951. Electrical Connector, United States patent #2,540,012 BNC is an acronym for Bayonet Neill–Concelman. The BNC connector is still in common use for coaxial cables that carry high frequency currents between pieces of electronics and communications equipment.
An example of a weak link would be an electrical connector that contains electrical wires made from a low melting point alloy. During a fire, those wires would melt breaking any electrical connection.
A male DE-9 connector (plug) 13W3 connector (plug) The D-subminiature or D-sub is a common type of electrical connector. They are named for their characteristic D-shaped metal shield. When they were introduced, D-subs were among the smallest connectors used on computer systems.
Today the standard electrical connector for interconnection in the US, and much of the world, is the registered jack family of standards, especially RJ11. This was introduced by the Bell System in the 1970s, following a 1976 FCC order. Since then, it has gained popularity worldwide, and is a de facto international standard.
Profibus electrical connector PROFIBUS (Process Field Bus) is a standard for fieldbus communication in automation technology and was first promoted in 1989 by BMBF (German department of education and research) and then used by Siemens. It should not be confused with the PROFINET standard for Industrial Ethernet. PROFIBUS is openly published as part of IEC 61158.
Many OEM machinery manufacturers have switched to using mercury swivel commutators for reliable and accurate temperature control. It is also desirable to pass the power and the temperature signal through the same rotating electrical connector in order to minimize the number of connector parts that must be built into the machine. Multiple channel mercury swivel commutators are used for this purpose.
RiT Technologies was founded in 1989 by Ofer Bengal, who recruited brothers Yehuda and Zohar Zisapel as chief investors in the company. RiT's first product was an electrical connector, which competed with AMP Incorporated for market share. Their next product was PatchView, a network computer cable infrastructure management system. In 1997 RiT began marketing PairView, a system for monitoring and managing copper-wire telephone networks.
A low-force helix (LFH-60) is a 60-pin electrical connector (four rows of 15 pins) with signals for two digital and analog connectors. Each of the pins, visible in the photograph, is twisted approximately 45 degrees between the tip and the white plastic frame which holds all the pins. Hence "helix" in the name. The DMS-59 is a derivative of the LFH60.
For wide bodied jets, the seats can be 10 across, labeled ABC-DEFG-HJK. The letter I is skipped to avoid mistaking it as row number 1. In Vehicle Identification Number used by motor vehicle manufacturers, the letters I, O and Q are omitted for their similarity to 1 or 0. Tiny embossed letters are used to label pins on an V.35/M34 electrical connector.
Search by connector application; JST. JST connectors are used in many types of products, and commonly used by electronics hobbyists and consumer products for rechargeable battery packs, battery balancers, battery eliminator circuits, 3D printers, and radio controlled servos."JST" connector confusion - the real story; rcgroups blog. The term "JST" is incorrectly used as a vernacular term meaning any small white electrical connector mounted on PCBs.
Priroda was launched on April 23, 1996, on a Proton rocket. After reaching orbit, an electrical connector failure caused the amount of power available on Priroda to be cut in half. Due to the electrical problem, Priroda would only have one attempt at docking before power would be lost. This caused some concern for ground controllers because most other modules failed to dock on their first attempt.
In vehicle steering systems a clock spring or clockspring is a spiral-wound special rotary electrical connector which allows a vehicle's steering wheel to turn while still making an electrical connection between the steering wheel airbag and/or the vehicle's horn and other devices and the vehicle's electrical systems. The clockspring is located between the steering wheel and the steering column. Another term for this automotive part is a spiral cable.
Neutrik powerCON type B connectors. powerCON Male type A, electricity source, cable connector powerCON Female type A, electricity inlet, chassis mount powerCON is an electrical connector manufactured by Neutrik for connecting mains power to equipment in a small space. It looks and works similarly to the Speakon connector, with the line connector inserted in the chassis connector and twisted to make contact and lock. Both line and chassis connectors are fully insulated even when disconnected.
The sensor has an input port to measure the hydraulic braking pressure and an electrical connector output for a wire connection for feeding the warning light. Some brake failures do not trip the sensor into a fault mode. A brake fluid pressure sensor is used in anti-lock braking system (ABS). ABS fault lights come on with unexpected wheel lock from the ABS system, but could also include low fluid in the reservoir.yourmechanic.
The Mini E could be charged by 120 volt (at 12 amp) and 240 volt (at 32 or 48 amp) power sources; charging times were 20 hours and 3.5 hours (fast-charge system). Charge rate was set from the instrument panel before charging. The 240 volt 32 amp home "wall box" charging stations for the USA trial were made by Clipper Creek, with a proprietary electrical connector to the car made by ODU.
A camlock, or also cam lock and Cam-Lok, is an interchangeable single-pole electrical connector often used in temporary electrical power production and distribution predominantly used in North America. Originally a trade name as Cam-Lok, it is now a generic term. The most common form is the 16 series, rated at 400 amperes with 105 °C terminations. Also in common use is the 15 series (mini-cam), rated at 150 amperes.
The shift was made in order to double the workforce of the Mount Vernon plant and to consolidate the company's two electrical connector assembly lines. With the increase in workforce, the company became one of the largest private employers in Mount Vernon. In the same year, the company provided two $15,000 gift funds to Ozarks Technical Community College. The funds supported the expansion of the Information Commons West on the Springfield campus and financed the Middle College program.
Left to right, modular connectors: 8P8C plug, 6P6C plug, 6P4C plug, 4P4C plug, 6P6C jack. crimped onto a cable (with molded sleeve). A modular connector is a type of electrical connector for cords and cables of electronic devices and appliances, such in computer networking, telecommunication equipment, and audio headsets. Modular connectors were originally developed for use on specific Bell System telephone sets in the 1960s, and similar types found use for simple interconnection of customer-provided telephone subscriber premises equipment to the telephone network.
BNC tee connector A tee connector is an electrical connector that connects three cables together. It is usually in the shape of a capital T. It is usually used for coax cables and the three connector points can be either female or male gender, and could be different or the same standard, such as F type, BNC or N type. Tee connectors can be used to split radio frequency power from a cable into two. They can be used to attach a piece of electronic test equipment.
If one has specified wires within a cable (for instance, the colored Ethernet cable wires in TIA/EIA-568-B), then the order in which different color wires are attached to pins of an electrical connector defines the wiring scheme. In any multi-pin connector, there are multiple ways to map wires to pins, so different configurations may be created which superficially look identical but function differently. These configurations are defined by pinouts. Many connectors have multiple standard pinouts in use for different manufacturers or applications.
An RCA connector, sometimes called a phono connector or (in other languages) Cinch connector, is a type of electrical connector commonly used to carry audio and video signals. The name RCA derives from the Radio Corporation of America, which introduced the design by the early 1940s for internal connection of the pickup to the chassis in home radio-phonograph consoles. It was originally a low-cost, simple design, intended only for mating and disconnection when servicing the console. Refinement came with later designs, although they remained compatible.
Data extraction is the act or process of retrieving data out of (usually unstructured or poorly structured) data sources for further data processing or data storage (data migration). The import into the intermediate extracting system is thus usually followed by data transformation and possibly the addition of metadata prior to export to another stage in the data workflow. Usually, the term data extraction is applied when (experimental) data is first imported into a computer from primary sources, like measuring or recording devices. Today's electronic devices will usually present an electrical connector (e.g.
16-pin male MIL-DTL-5015 Amphenol electrical connector 36-pin "Micro ribbon" (centronics) connector. (Micro ribbon connectors were an Amphenol invention, but this sample may not have been manufactured by Amphenol) Amphenol Corporation is a major producer of electronic and fiber optic connectors, cable and interconnect systems such as coaxial cables. Amphenol is a portmanteau from the corporation's original name, American Phenolic Corp. Amphenol was founded in Chicago in 1932 by entrepreneur Arthur J. Schmitt, whose first product was a tube socket for radio tubes (valveholder bases).
Mini-USB socket with additional pins and notch on Canon camera An enhanced mini-USB (EMU) connector is a type of hybrid electrical connector which carries Universal Serial Bus data and power as well as other connections such as bidirectional audio. It was invented for and is mainly used on mobile phones. Motorola, HTC Corporation, and other mobile phone manufacturers use EMU connectors.HTC Hermes USB connector pin config There is more than one standard for EMU connectors, which are incompatible between manufacturers, but all are physically and electrically compatible with standard mini-USB connectors.
A type N coaxial RF connector (male) Electronic symbols for the plug and jack coaxial connectors Time-domain reflectometry shows reflections due to impedance variations in mated RF connectors. A coaxial RF connector (radio frequency connector) is an electrical connector designed to work at radio frequencies in the multi-megahertz range. RF connectors are typically used with coaxial cables and are designed to maintain the shielding that the coaxial design offers. Better models also minimize the change in transmission line impedance at the connection in order to reduce signal reflection and power loss.
A tow hook mounted on the rear of a vehicle A trailer coupled (i.e., "hooked") onto a ball-type tow hitch and electrical connector plugged in In the European Union, tow hitches must be a type approved by European Union directive 94/20/EC requirements and fitted to vehicles first registered on or after 1 August 1998. The ISO standard tow ball is in diameter and conforms to a standard BS AU 113b (replaced by BS ISO 1103:2007). The ISO standard has been adopted in most of the world outside North America.
A DC connector (or DC plug, for one common type of connector) is an electrical connector for supplying direct current (DC) power. Compared to domestic AC power plugs and sockets, DC connectors have many more standard types that are not interchangeable. The dimensions and arrangement of DC connectors can be chosen to prevent accidental interconnection of incompatible sources and loads. Types vary from small coaxial connectors used to power portable electronic devices from AC adapters, to connectors used for automotive accessories and for battery packs in portable equipment.
The XM's reliability became suspect due to a problem with the quality of electrical connector used. Cost-cutting on the components was needed since the parent company was in financial difficulty at the time of the design of the XM. Between 1980 and 1984 the company lost $1.5 billion. Poor connections would stop the car, and require extensive investigation by a trained mechanic to repair. This point was driven home in one of the final reviews of 2000, when Richard Bremner's polemical “Parting Shot” essay in Car (magazine) emphasized these electrical faults.
A software protection dongle (commonly known as a dongle or key) is an electronic copy protection and content protection device. When connected to a computer or other electronics, they unlock software functionality or decode content. The hardware key is programmed with a product key or other cryptographic protection mechanism and functions via an electrical connector to an external bus of the computer or appliance. In software protection, dongles are two-interface security tokens with transient data flow with a pull communication that reads security data from the dongle.
DA, DB, DC, DD, and DE sized connectors D-subminiature or D-sub is a common type of electrical connector used particularly in computers. Calling them "sub-miniature" was appropriate when they were first introduced, but today they are among the largest common connectors used in computers. The DB25 is used for multi-track recording and other multi-channel audio, analog or digital (ADAT interface (DB25)), and was the standard connector for IBM compatible PC printer connection before USB and other connections became popular. It offered 8 simultaneous data pathways to the printer.
6x1 male pin header 6x1 female socket 8x2 male pin header 13x2 box header, shrouded with notch key, triangle denotes pin 1 A pin header (often abbreviated as PH, or simply header) is a form of electrical connector. It consists of one or more rows of male pins typically spaced apart, but common sizes also include , , , , and . The distance between pins (measured from center to center) is known as pitch. In the past, a pin header was known as a Berg connector, but the term fell out of favor because pin headers are manufactured by many companies.
A 2013 study stated the levels of nickel have been found to be 100 times higher than cigarette smoke. A 2014 study stated the levels of silver have been found to be at a greater amount than with cigarette smoke. Increased amounts of copper and zinc in vapor generated by some e-cigarettes may be the result of corrosion on the brass electrical connector as indicated in particulates of copper and zinc in e-liquid. In addition, a tin solder joint may be subjected to corrosion, which may result in increased amounts of tin in some e-liquids.
SDL plug with six pins A shielded data link connector is a type of electrical connector in which the signal pins are surrounded by a metal shield. The connector was designed by AMP (now TE Connectivity) and is available with a range of pins (four to 16). It also features a locking mechanism and is available in differently keyed plugs that correspond to the proper socket. It has been used by several different products, most notably on the original IBM Model M keyboard with a detachable cable, and on HP HIL devices (such as keyboards and mice).
The ccTalk protocol is a byte-oriented protocol. The series of bytes in a message -- represented above as a series of decimal numbers -- is transmitted as 8-N-1. Many devices have single electrical connector that carries both power (typically +12 V or +24 V) and the ccTalk data over a total of 4 wires. To reduce cost, for short interconnection distances CPI recommends sending ccTalk data over an unbalanced multi-drop open-collector interface: both transmit and receive messages occur on the same bi-directional serial DATA line at TTL level, driven through an open-collector NPN transistor.
Micro ribbon 36-pin male on cable Micro ribbon 36-pin female on a circuit board The micro ribbon or miniature ribbon connector is a common type of electrical connector for a variety of applications, such as in computer and telecommunications equipment having many contacts. The connector contains two parallel rows of contacts within a shielded case having a characteristic D-shape similar to that used in D-subminiature connectors. The contacts are not pins, but small flat bands of metal, called ribbon contacts. The connectors are manufactured in many capacities, including 14-, 24-, 36-, 50-, 64-, and 100- pin varieties.
RADOX Solar connectors are a largely obsolete electrical connector used to connect solar panels together in series to form strings. The RADOX Solar brand covered a variety of products from Huber+Suhner of Austria, but the connectors are the best known member of the line and the term Radox connector is synonymous. The Radox connectors were most widely known from their use on REC solar panels from Norway, and did not find widespread use outside that market. Radox connectors did not meet new US standards that required the cables to not be able to disconnect without the use of a tool.
In the US, a stationary (more fixed) electrical connector is called a jack. The terms phone plug and phone jack are sometimes used to refer to different genders of phone connectors, but are also sometimes used to refer to RJ11 and older telephone plugs and the corresponding jacks that connect wired telephones to wall outlets. Phone plugs and jacks are not to be confused with the similar terms phono plug and phono jack (or in the UK, phono socket) which refer to RCA connectors common in consumer hi-fi and audiovisual equipment. The 3.5 mm connector is, however, sometimes—but counter to the connector manufacturers' nomenclature—referred to as mini phono.
There he has continued to compose music and organize some of his life's work for this album, with the endless support of his wife, Mary. After refining his music with the help of Kelly Yost and including the artistic talents of his oldest son, Paul, he has presented a great compilation of Lost Art. In the summer of 2007, Mark Melni invented The Melni Electrical Connector in his garage. With a design concept similar to the Chinese finger trap, the invention contains an electrically-conductive spiral that, once the connector is twisted, is able to “grip” stripped wires, cables and other elongated elements and securely connect them.
Terminal symbol A terminal strip, to which wires can be soldered A terminal is the point at which a conductor from a component, device or network comes to an end. Terminal may also refer to an electrical connector at this endpoint, acting as the reusable interface to a conductor and creating a point where external circuits can be connected. A terminal may simply be the end of a wire or it may be fitted with a connector or fastener. In network analysis, terminal means a point at which connections can be made to a network in theory and does not necessarily refer to any physical object.
The PS/2 port is a 6-pin mini-DIN connector used for connecting keyboards and mice to a PC compatible computer system. Its name comes from the IBM Personal System/2 series of personal computers, with which it was introduced in 1987. The PS/2 mouse connector generally replaced the older DE-9 RS-232 "serial mouse" connector, while the PS/2 keyboard connector replaced the larger 5-pin/180° DIN connector used in the IBM PC/AT design. The PS/2 keyboard port is electrically and logically identical to the IBM AT keyboard port, differing only in the type of electrical connector used.
Bratenahl persisted and studied more film of Atlas launches with the frames enlarged, which revealed light flashes in the post-staging plume. Another phone call to Convair revealed that of RP-1 were also dumped during staging and that the Atlas's sustainer engine exhaust ignited the propellant cloud, producing these flashes. Since the umbilical door on the payload shroud was only held in place with a thin latching mechanism, hot gases from igniting propellant could have contacted the electrical connector and caused a short. The inadvertent activation of the telemetry system during launch had occurred almost simultaneous with booster jettison at T+140 seconds.
These paired sets of hooks had been successfully used on both Soyuz and Salyut. In addition, the group concurred on details regarding the alignment pins, spring thrusters (to assist in the separation of the spacecraft at undocking), and electrical connector locations. To evaluate the docking system concept and to ensure the establishment of compatibility at an early point in the development, the men planned to build a two-fifths-scale test model, the exact details of which would be decided at the next joint meeting. Upon his return to Houston, Caldwell Johnson prepared a memorandum to document some of the informal understandings reached in Moscow.
Some disadvantages are that connecting wires is more difficult than simply plugging in a cable, and screw terminals are generally not very well protected from contact with persons or foreign conducting materials. Terminal blocks of various types Terminal blocks (also called terminal boards or strips) provide a convenient means of connecting individual electrical wires without a splice or physically joining the ends. Since terminal blocks are readily available for a wide range of wire sizes and terminal quantity, they are one of the most flexible types of electrical connector available. One type of terminal block accepts wires that are prepared only by stripping a short length of insulation from the end.
AMP Mate-n-Lok and Molex Standard 0.093-inch pin and socket power connectors Molex connector is the vernacular term for a two-piece pin and socket interconnection. Pioneered by Molex Connector Company, the two-piece design became an early electronic standard. Molex developed and patented the first examples of this connector style in the late 1950s and early 1960s.Krehbiel, John H.; "Wire Connector" US 3178673, issued April 1965Krehbiel, John H.; "Electrical Connector Having Resilient Accurately Bendable Locking Means", US 3409858, issued November 1968 First used in home appliances, other industries soon began designing it into their products from automobiles to vending machines to mini-computers.
Easy push speaker grip connector terminal A speaker terminal is a type of electrical connector often used for interconnecting speakers and audio power amplifiers. The terminals are used in pairs with each of the speaker cable's two wires being connected to one terminal in the pair. Since speaker cables are polarized, the terminals are most often color-coded so that the positive wire connects to the red and the negative to the black terminal. The terminal consists of a spring-loaded metallic pincher which opens when the lever is pressed, and when released will tightly grip the conductor which has been inserted into it.
Solarlok is a largely obsolete electrical connector used to connect solar panels together. Solarlok was introduced by Tyco International in order to meet new National Electrical Code (NEC) standards that required panel connectors to lock together and only be separated again using a tool. Solarlok became very common in the United States where the code first came into effect, but had varying degrees of market success outside the US. Due to the connector only being available from Tyco, the connectors are almost always referred to simply as Tyco connectors. Solar panels are generally connected together in series, or strings, which allows cabling to be daisy-chained between the panels.
555 timer integrated circuit showing its 8 pins (numbered 1-8) and their corresponding functions ("ground", "trigger", "output", etc.) In electronics, a pinout (sometimes written "pin-out") is a cross-reference between the contacts, or pins, of an electrical connector or electronic component, and their functions. "Pinout" now supersedes the term "basing diagram" that was the standard terminology used by the manufacturers of vacuum tubes and the RMA. The RMA started its standardization in 1934, collecting and correlating tube data for registration at what was to become the EIA. The EIA (Electronic Industries Alliance) now has many sectors reporting to it, and sets what are known as EIA standards where all registered pinouts and registered jacks can be found.
During the course of the ten-day flight, the astronauts successfully conducted scores of biomedical and materials sciences experiments inside the pressurized SPACEHAB module. Two astronauts participated in a spacewalk and EURECA (European Retrievable Carrier) was retrieved by the crew and stowed inside Endeavour's payload bay. EURECA had been deployed from the Space Shuttle Atlantis in the summer of 1992 and contained several experiments to study the long-term effects of exposure to microgravity. Liftoff of STS-57EURECA is stowed by Endeavour's remote manipulator system (RMS) An improperly installed electrical connector on Endeavour's Remote Manipulator System (RMS) arm (installed 180 degrees off its correct position) prevented EURECA from recharging its batteries with orbiter power.
Modular connector 6P6C plug (left) and 6P4C jack (right) A telephone jack and a telephone plug are electrical connectors for connecting a telephone set or other telecommunications apparatus to the telephone wiring inside a building, establishing a connection to a telephone network. The plug is inserted into its counterpart, the jack, which is commonly affixed to a wall or baseboard. The standards for telephone jacks and plugs vary from country to country, though the RJ11 modular connector has become by far the most common type. A connection standard, such as RJ11, specifies not only the physical aspects of an electrical connector, but also the signal definitions for each contact, and the pinout of the device, i.e.
Offshore and onshore export cables were to be energised at up to 220kV for a connection at Bicker Fen at 400kV. The proposed onshore cable route consisted of around of underground cable - a number of interested parties raised concerns about the cable route and windfarm: farmers and the NFU raised concerns about its affects on drainage; and Lincoln City Council claimed the development would have a negative affect of tourism; Lincolnshire County Council raised concerns about the combined environmental impact of the onshore link together with the Viking Link electrical connector to Denmark. The electrical grid connection including onshore and offshore cabling was given planning permission in September 2016. If constructed the wind farm is estimated (2015) to represent a total investment of £3-4 billion.
Sectional drawing of a pogo pin, showing the plunger, barrel, and spring A pogo pin or spring-loaded pin is a type of electrical connector mechanism that is used in many modern electronic applications and in the electronics testing industry. They are used for their improved durability over other electrical contacts, and the resilience of their electrical connection to mechanical shock and vibration. The name pogo pin comes from the pin's resemblance to a pogo stickthe integrated helical spring in the pin applies a constant normal force against the back of the mating receptacle or contact plate, counteracting any unwanted movement which might otherwise cause an intermittent connection. This helical spring makes pogo pins unique, since most other types of pin mechanisms use a cantilever spring or expansion sleeve.
The term may also be used to define replacement criteria for other components"A universal four-contact plug and jack assembly ..." available from multiple sources. For example, a plug-compatible cooling fan may need to have not only the same physical size and shape, but also similar capability, run from the same voltage, use similar power, attach with a standard electrical connector, and have similar mounting arrangements. Some non-conforming units may be re- packaged or modified to meet plug-compatible requirements, as where an adapter plate is provided for mounting, or a different tool and instructions are supplied for installation, and these modifications would be reflected in the bill of materials for such components. Similar issues arise for computer system interfaces when competitors wish to offer an easy upgrade path.
DIP-28W package A large ZIF socket (Socket A) Zero Insertion Force Connector from a Philips C5-2 Ultrasound probe. Zero insertion force (ZIF) is a type of IC socket or electrical connector that requires very little force for insertion. With a ZIF socket, before the IC is inserted, a lever or slider on the side of the socket is moved, pushing all the sprung contacts apart so that the IC can be inserted with very little force - generally the weight of the IC itself is sufficient and no external downward force is required. The lever is then moved back, allowing the contacts to close and grip the pins of the IC. ZIF sockets are much more expensive than standard IC sockets and also tend to take up a larger board area due to the space taken up by the lever mechanism.
W2.1x9.5d base, a common 5-watt bulb in landscape lighting and some interior automotive applications such as the dome light A wedge base is a type of electrical connector used as a fitting for small light bulbs. It is similar to the bi-pin connector, except that the two "pins" are the same wires that extend into the bulb (rather than being rigid), and the wires are bent up onto the sides of the base, where they make contact with the socket. The wires are usually inserted into a plastic base that the bulb is mounted in, and which is often narrower at the tip than at the bulb, giving it a wedge shape and usually ensuring a tight connection, depending on manufacturing tolerances. Some bulbs have no plastic base, and the wires are simply bent up to the sides of the bulb's glass base.
Various laboratory-style 4 mm banana plugs Loudspeaker-style banana plugs connected to a loudspeaker A banana connector (commonly banana plug for the male, banana socket or banana jack for the female) is a single-wire (one conductor) electrical connector used for joining wires to equipment. The term 4 mm connector is also used, especially in Europe, although not all banana connectors will mate with 4 mm parts, and 2 mm banana connectors exist. Various styles of banana plug contacts exist, all based on the concept of spring metal applying outward force into the unsprung cylindrical jack to produce a snug fit with good electrical conductivity. Common types include: a solid pin split lengthwise and splayed slightly, a tip of four leaf springs, a cylinder with a single leaf spring on one side, a bundle of stiff wire, a central pin surrounded by a multiple-slit cylinder with a central bulge, or simple sheet spring metal rolled into a nearly complete cylinder.

No results under this filter, show 60 sentences.

Copyright © 2024 RandomSentenceGen.com All rights reserved.