When you're in the big city, you can atomize, right?
|
|
Third party data helps Facebook further atomize its user base into meaningful segments for advertisers.
|
|
Epic has spurred new policy designed to curtail the move to privatize and atomize adjudication.
|
|
The Nebia shower system uses technology found in rocket engines to atomize water into millions of tiny droplets.
|
|
The Republican field could atomize in either seat and lead to a Democrat-on-Democrat general election, guaranteeing a pickup.
|
|
These transformations gradually atomize neighborhoods to a point where long-time locals may feel like strangers in their own home.
|
|
In this case, federal officials said the fuel dumping procedure did not occur at the optimal altitude that would have allowed the fuel to atomize properly.
|
|
"In this emergency situation, the fuel-dumping procedure did not occur at an optimal altitude that would have allowed the fuel to atomize properly," the FAA said in a statement.
|
|
Metered-dose inhalers contain liquified, compressed gas hydrofluoroalkane (HFA) -- a greenhouse gas -- which acts as a propellant to atomize the drug being delivered and to pump it out to the user.
|
|
Computers are infinitely patient and accurate in comparing prices and opportunities, and now companies can provide a complete set of services to atomize the fixed costs formerly required for market entry.
|
|
But I do not think we should just accept that when we marry and start families, we atomize, and our friendships, like our taste in music, freeze where they were when we were young and single.
|
|
If the economy's capacity to atomize workers and conjure up wealth were part of the story of our unraveling confidence in capitalism, this decade also saw a surge in awareness of pay disparities, discrimination, and scams.
|
|
Once operational, this new Google Assistant function promises to remove yet another human-to-human interface, serving laudable purposes — such as helping a busy parent by making a call to schedule a doctor's appointment for an ailing child — but also serving to distance and atomize us as individuals.
|
|
But in the present day, I've come up with a more nuanced view: technology will atomize jobs, make workers more fungible and easier to replace — think Uber drivers and other on-demand economy gigs — and software will drive the world into Extremistan, wherein ~20% of us do very well, while the other 80% struggle to get by as part of the Precariat, with no careers and no security.
|
|
For atomic mass spectrometry, a sample must also be ionized. Vaporization, atomization, and ionization are often, but not always, accomplished with a single source. Alternatively, one source may be used to vaporize a sample while another is used to atomize (and possibly ionize). An example of this is laser ablation inductively-coupled plasma atomic emission spectrometry, where a laser is used to vaporize a solid sample and an inductively-coupled plasma is used to atomize the vapor.
|
|
Promession as a functional method is questioned. No facility for promession has been built or put into service. Critics argue that there is a physical impossibility to atomize a freeze dried human body in this way.
|
|
In 2006 Anand Jon founded his own denim-design company Jeanisis Fashion Inc. and the same year received capitalization from the Joseph Stevens & Co. Inc. investment firm. Anand Jon was scheduled to introduce his Atomize Collection during the Mercedes-Benz Fashion Week at Smashbox Studios in March 2007.
|
|
In an engine running at lower RPMs, a smaller intake valve area forces a given volume of air to flow into the chamber faster; this causes the fuel to atomize better, and therefore burn far more efficiently. An average of can be achieved while in lean burn at a constant speed of .
|
|
Figure 1 - Baffle spray scrubber Baffle spray scrubbers are a technology for air pollution control. They are very similar to spray towers in design and operation. However, in addition to using the energy provided by the spray nozzles, baffles are added to allow the gas stream to atomize some liquid as it passes over them. A simple baffle scrubber system is shown in Figure 1.
|
|
LVLP system. Spray painting is a painting technique in which a device sprays coating material (paint, ink, varnish, etc.) through the air onto a surface. The most common types employ compressed gas—usually air—to atomize and direct the paint particles. Spray guns evolved from airbrushes, and the two are usually distinguished by their size and the size of the spray pattern they produce.
|
|
Two-fluid nozzles atomize by causing the interaction of high velocity gas and liquid. Compressed air is most often used as the atomizing gas, but sometimes steam or other gases are used. The many varied designs of two-fluid nozzles can be grouped into internal mix or external mix depending on the mixing point of the gas and liquid streams relative to the nozzle face.
|
|
The effects of the war, therefore, were to establish Persia's ability to interfere successfully in Greek politics, to atomize and isolate from one another Greek city states, and to affirm Sparta's hegemonic position in the Greek political system.Fine, The Ancient Greeks, 556–9 The Corinthian War was succeeded by the Theban–Spartan War of 378–362 BC, in which Sparta would finally lose its hegemony, this time to Thebes.
|
|
Aroused Siva delights him as invincible whereby, he trounces the universe. Once on his journey, he febrile to the beauty of Rambha and molests her. Being cognizant of it, Nalakubara (Saradhi) curses him to atomize when he aspires to possess any woman without her wish. However, his ferocities peeks the summit, when all the creators bow before Lord Vishnu (Haranath) one that gives assurance of salvation to eliminate the monster.
|
|
Venturi scrubbers consist of a venturi-shaped inlet and separator. The dust-laden gases venturi scrubber enter through the venturi and are accelerated to speeds between 12,000 and 36,000 ft/min (60.97-182.83 m/s). These high-gas velocities immediately atomize the coarse water spray, which is injected radially into the venturi throat, into fine droplets. High energy and extreme turbulence promote collision between water droplets and dust particulates in the throat.
|
|
She therefore welcomes it, under the name of Francoeur (meaning "honest heart"). It is then revealed that the creature is a flea that the fertilizer, amidst all the other chemicals in the laboratory explosion (including the Atomize-a-Tune, resulting in Francouer’s beautiful voice), enlarged to human scale. During the investigation, Emile and Raoul's role in the laboratory incident is discovered. For Maynott's interest in the creature, they receive the Medal of Honor.
|
|
According to Strauss and Howe, the Third Turning is an Unraveling. The mood of this era they say is in many ways the opposite of a High: Institutions are weak and distrusted, while individualism is strong and flourishing. The authors say Highs come after Crises, when society wants to coalesce and build and avoid the death and destruction of the previous crisis. Unravelings come after Awakenings, when society wants to atomize and enjoy.
|
|
One method of spray deposition used for CNT film creation is an ultrasonic nozzle to atomize CNTs in solution to form PEDOT layers. By optimizing spray parameters, including surfactant, drop size (dictated by the ultrasonic nozzle frequency) and solution flow rate, sheet resistance characteristics can be tuned. Due to the ultrasonic vibration of the nozzle itself, this method also provides an additional level of sonification during the spray process for added separation of agglomerated CNTs.
|
|
An increase in flow rate will increase the pressure drop and decrease the drop size, while a decrease in flow rate will decrease the pressure drop and increase the drop size. Spray angle: Spray angle has an inverse effect on drop size. An increase in spray angle will reduce the drop size, whereas a reduction in spray angle will increase the drop size. Liquid properties: Viscosity and surface tension increase the amount of energy required to atomize the spray.
|
|
Heating of the intake air is specifically used for liquid fuels such as petrol that do not atomize easily under the temperature and pressure conditions present in the intake system of an engine prior to coming up to full operating temperature. Fuels such as liquefied petroleum gas and natural gas do not require this heating, as they are in gaseous form in the intake, mix more effectively with the air and cannot fall out of suspension.
|
|
Sales-Girons pressurized nebulizer from 1858 The first "powered" or pressurized inhaler was invented in France by Sales-Girons in 1858. This device used pressure to atomize the liquid medication. The pump handle is operated like a bicycle pump. When the pump is pulled up, it draws liquid from the reservoir, and upon the force of the user's hand, the liquid is pressurized through an atomizer, to be sprayed out for inhalation near the user's mouth.
|
|
The ultrasonic humidifier, one type of nebulizer (a device that creates a very fine spray), is a popular type of humidifier. It works by vibrating a metal plate at ultrasonic frequencies to nebulize (sometimes incorrectly called "atomize") the water. Because the water is not heated for evaporation, it produces a cool mist. The ultrasonic pressure waves nebulize not only the water but also materials in the water including calcium, other minerals, viruses, fungi, bacteria, and other impurities.
|
|
Even the fueling system was ahead of its time, the team adopting electronic carburetors without float bowls which used ducted air to atomize the fuel, much like a fuel-injection system. KR hoped that such a setup would avoid the fuel from emulsifying from intense vibrations. Arrow made an exhaust system for the engine. The result of this was an engine that produced 160 hp in the early years, and the team went on to improve the engine, producing 180 hp in 2002.
|
|
Robert Goddard, bundled against the cold weather of March 16, 1926, holds the launching frame of his most notable invention — the first liquid-fueled rocket. Goddard began experimenting with liquid oxidizer, liquid fuel rockets in September 1921, and successfully tested the first liquid propellant engine in November 1923. It had a cylindrical combustion chamber, using impinging jets to mix and atomize liquid oxygen and gasoline. In 1924–25, Goddard had problems developing a high- pressure piston pump to send fuel to the combustion chamber.
|
|
Compressed air is air kept under a pressure that is greater than atmospheric pressure. Compressed air is an important medium for transfer of energy in industrial processes, and is used for power tools such as air hammers, drills, wrenches and others, as well as to atomize paint, to operate air cylinders for automation, and can also be used to propel vehicles. Brakes applied by compressed air made large railway trains safer and more efficient to operate. Compressed air brakes are also found on large highway vehicles.
|
|
Atomic mass spectrometry is similar to other types of mass spectrometry in that it consists of an ion source, a mass analyzer, and a detector. Atoms' identities are determined by their mass-to-charge ratio (via the mass analyzer) and their concentrations are determined by the number of ions detected. Although considerable research has gone into customizing mass spectrometers for atomic ion sources, it is the ion source that differs most from other forms of mass spectrometry. These ion sources must also atomize samples, or an atomization step must take place before ionization.
|
|
In 1864, the first steam-driven nebulizer was invented in Germany. This inhaler, known as "Siegle's steam spray inhaler", used the Venturi principle to atomize liquid medication, and this was the very beginning of nebulizer therapy. The importance of droplet size was not yet understood, so the efficacy of this first device was unfortunately mediocre for many of the medical compounds. The Siegle steam spray inhaler consisted of a spirit burner, which boiled water in the reservoir into steam that could then flow across the top and into a tube suspended in the pharmaceutical solution.
|
|
This provides the rich mixture required to sustain operation at low engine temperatures. In addition, the choke can be connected to a cam (the fast idle cam) or other such device which prevents the throttle plate from closing fully while the choke is in operation. This causes the engine to idle at a higher speed. Fast idle serves as a way to help the engine warm up quickly, and give a more stable idle by increasing airflow throughout the intake system which helps to better atomize the cold fuel.
|
|
Pump spray haze machines use electricity or compressed CO2 to power a spray pump connected to a mixing valve, which draws in and atomizes the fluid. Pump hazers also includes machines which function in the same manner as a fog machine, pumping fluid into a heated chamber where it is vapourized to produce a cloud. Hazers which heat fluid to create an atmospheric effect only use mixtures of water and glycol or glycerine. Spray hazers which atomize fluid can use either a water- based or mineral oil fluid.
|
|
Aerosol spray can Spray atomization can be formed by several methods. The most common method is through a spray nozzle which typically has a fluid passage that is acted upon by different mechanical forces that atomize the liquid.Lipp, Charles W. , Practical Spray Technology: Fundamentals and Practice , 2012, The first atomization nozzle was invented by Thomas A. DeVilbiss of Toledo, Ohio in the late 1800s His invention was bulb atomizer that used pressure to impinge upon a liquid, breaking the liquid into a fine mist. Spray formation has taken on several forms, the most common being, pressure sprayers, centrifugal, electrostatic and ultrasonic nozzle.
|
|
A glow-discharge device (GD) serves as a versatile source, as it can simultaneously introduce and atomize the sample. The glow discharge occurs in a low-pressure argon gas atmosphere between 1 and 10 torr. In this atmosphere lies a pair of electrodes applying a DC voltage of 250 to 1000 V to break down the argon gas into positively charged ions and electrons. These ions, under the influence of the electric field, are accelerated into the cathode surface containing the sample, bombarding the sample and causing neutral sample atom ejection through the process known as sputtering.
|
|
Here, Raoul experiments with an "Atomize-a- Tune" mixture which temporarily gives Charles the voice of an opera singer and an unstable "super fertilizer" which instantly grows a sunflower seed into a giant sunflower, which topples towards Raoul and Emile. In the ensuing disorder, an explosion occurs when the two chemicals are mixed. Everyone is unscathed, but Emile is convinced he has glimpsed a monstrous creature, a photo of which later appears in the newspapers. An investigation is launched into the whereabouts of the creature by Maynott's second in command, Pâté, but is fronted by Maynott, in the hope of popular support for his mayoral candidacy.
|
|
His belt contains many gadgets which help him to teleport, atomize, and reduce his size to any desired level. Initially, he used the button on his belt to do these actions, but later on Probot changed it into a voice recognition device, so that he could use his powers just by calling its name. Parmanu receives back up from Probot, a robot who keeps an eye on Delhi with the help of his cameras, which he has fitted in numerous locations around the city. And he also gets help from Pralayanka (Mamta Pathak) who also is a creation of his maternal uncle like him.
|
|
In 1921, the Jipseong Johap was established by Korean and Japanese entrepreneurs, attempting to provide poverty assistance for butchers. However, this effort for improvement of economic conditions was soon overshadowed by an organization with broader goals. The Hyeongpyeongsa was launched in Jinju on 23 April 1923 through the alliance of wealthy or educated baekjeong and non- baekjeong proponents of change, advocating for "the abolition of classes and of contemptuous appellations, the enlightenment of members, and the promotion of mutual friendship among members." It advocated both for individual civil rights as well as communal fellowship, recognizing that the group must maintain its identity under the strain of changes such as urbanization and industrialization which threatened to atomize the community.
|
|
The BIGEYE was an air-launched 500 pound-class canister weapon to be delivered by various U.S. Navy and Air Force aircraft. The interior of the weapon consisted of two separate containers of non-lethal chemical compounds, stored separately and assembled only immediately before flight, and then combined to create the active chemical nerve agent VX only after aircraft release. It was the storage separation of less aggressive chemical components that ensured safe storage/handling and simpler maintenance requirements. The bomb was a Navy weapon design that would atomize the percutaneous nerve agent VX over a targeted area by releasing the binary- generated agent while gliding through the air over the target.
|
|
Figure 1 - Venturi scrubber A venturi scrubber is designed to effectively use the energy from a high velocity inlet gas stream to atomize the liquid being used to scrub the gas stream. This type of technology is a part of the group of air pollution controls collectively referred to as wet scrubbers. Venturis can be used to collect both particulate and gaseous pollutants, but although the liquid surface area provided is quite large they are more effective in removing particles since particles can be trapped by contact, but gasses must be trapped by absorption during the relatively short exposure time. Venturi devices have also been used for over 100 years to measure fluid flow (Venturi tubes derived their name from Giovanni Battista Venturi, an Italian physicist).
|
|
Mikamo takes a cheap shot to try to atomize both women as she and Ayeka quibble over the rescue, before at last bristling over Yataka mewling there was no reason to do such a thing. "Tired of baby-sitting poser criminals", Mikamo decides to slaughter his "useless partner" but is blasted mid-stance by Ryoko, blowing a hole through the A.I. and the side of the ship. Last resorts Mikamo grows increasingly enraged as he fires repeatedly from orbit, his attempts at reprisal blocked by Tenchi and his Light-Hawk Wings. When Ayeka, Ryoko and Ibara take out his gun torrents the machine grows even more adamant, choosing to sacrifice itself and the ship by bringing it down on his enemies' heads.
|
|
He was the Rangers' support team before Elaris was a Ranger and turned bad as Qwark took all the credit for Nefarious' work and inventions along with the poor working conditions Nefarious had to deal with. It is also stated that he tried to atomize Aleero City but was stopped by Qwark and went to prison where he was presumably killed during a prison break. Instead of turning people into robots or changing time as he did in past games, Nefarious used Drek as a way to try to destroy the Solana Galaxy. This involved creating a superweapon known as the Deplanitizer with which Drek would destroy other planets and harvest suitable remains to create a replacement for his own overpolluted planet.
|
|
Most analytical pneumatic nebulizers use the same essential principle (induction) to atomize the liquid: When gas at a higher pressure exits from a small hole (the orifice) into gas at a lower pressure, it forms a gas jet into the lower pressure zone, and pushes the lower pressure gas away from the orifice. This creates a current in the lower pressure gas zone, and draws some of the lower pressure gas into the higher pressure gas jet. At the orifice, the draw of the lower pressure gas creates considerable suction, the extent depending on the differential pressures, the size of the orifice, and the shape of the orifice and surrounding apparatus. In all pneumatic induction nebulizers, the suction near the orifice is utilized to draw the liquid into the gas jet.
|
|
Currently, old installations from the 1950s and 1960s are still in operation today if they received regular maintenance. The maintenance involved in a gun burner usually is a replacement of the nozzle used to atomize the fuel, replacing the filter located at the air handler, replacing the fuel filter on the heating oil system from the tank, cleaning out any soot or deposits in the heat exchanger of the furnace, and ensuring the system is in good working order, and also involves checking and adjusting the fuel-air mixture for efficiency with a combustion analyzer. If a heating oil burner runs out of oil it often must be primed to be restarted. Priming involves purging any air from the fuel lines so that a steady flow of oil can find its way to the burner.
|
|
If, in addition, the rate of photoionization is greater than the rate of consumption of intermediates, then each selected state is converted to one electron plus one positive ion, so that the RIS process is saturated. A usually efficient way to produce free atoms of an element in the ground state is to atomize the elements by ion sputtering or thermal vaporization of the element from a laser matrix under vacuum conditions or at environments with pressures significantly less than normal atmospheric pressure. The resulting plume of secondary atoms is then channeled through the path of multiple tuned laser beams which are capable of exciting consecutive electronic transitions in the specified element. Light from these tuned lasers promotes the desired atoms above their ionization potentials whereas interfering atoms from other elements are hardly ionized since they are generally transparent to the laser beam.
|
|